I already went to "msconfig" and chose my default OS. Bios still stops at the Windows Boot Manager to show me the only OS there is for me to choose/use. How can I go straight to my desktop without the Boot Manager?
View 2 RepliesMy Acer Aspire 5820tz laptop will not work. The keyboard does not respond. The laptop sometimes goes to the Boot Manager when turned on, the boot manager flickers and is uncontrollable. Other times it gives off a loud violent beep sound. Once it went to login but the keyboard would not work so i could not login.
View 2 Replies View RelatedI haven't touched this laptop in a while. I received a virus which then slowed down my computer and made it really really slow to get into the windows log in screen. It wouldn't go past that. Now, 2 months later, I'm trying to install Ubuntu as my only OS. I hope this will get rid of whatever past problem I had. Is this true? The problem with this, is when I power it up and turn it on, the computer only goes to the "Toshiba Leading innovation" H2 BIOS screen. From here, the laptop screen keeps turning black/blank at random intervals (the disk drive kicks up after it turns blank). The screen returns to the BIOS screen... and I keep hitting F12 and nothing.
View 4 Replies View RelatedI updated my BIOS as I was having a problem mentioned in one of the updates. I was using the Easyflash2 by Asus and the update succeeded but when it re-booted I got the awful news..boot mgr missing. Would my best bet be to just re-image?
View 7 Replies View RelatedEverytime i start my computer and after putting my password, at the desktop, a box appears saying that program manager stops responding and it is needed to restart the pc. it does it ( by himself ) and it is a cicle that dont stop, only if i manually close
View 9 Replies View Relatedso i did a bios update, and it wont boot after the update.its a asus m4a79xtd evo (rev 1.01g)i dont have a backup of the bios
View 3 Replies View RelatedStill trying to find out why the Ports, Coms, etc don't show anywhere in Device Manager. I noticed an old Post where it said to look in add/Remove Hardware. Where do I find this Add/Remove Hardware option? There was also a Post to check the BIOS for this and to see if PORTS is set to Auto. How to have the Ports show up in Device Manager.
View 5 Replies View Relatedthis is what I did, since I have no CD-ROM, to install Windows 7 I created a partion X: NTFS and set it as the ACTIVE ONE, the put there the Windows 7 installation files, and opened prompt command to type bootsect.exe /n60 X: , next I restarted my computer, and automatically it booted into the Windows 7 setup, I installed Windows 7 on the partition C: and formatted the partition C:, everything installed and after the installation finished, a multiple choice menu appears that reads:[CODE]
View 6 Replies View RelatedMy PC goes through the BIOS stage and starts to load Windows 7, the GUI comes up and then it just stays there, goes into space with nothing happening. I have booted in Safe Mode and that works, but it won't boot into Safe with Command Prompt or Networking. I have tried the Repair my Computer option but that did not fix it. Then I did a System Restore but that did not fix it either. Not sure as to what to do next.
View 2 Replies View RelatedI have a hp pavilion dv9700 running windows 7 home premium,and the atheros wireless device keeps disapearing out of the device manager and stops working sometimes it works again if i reboot ,i have tried a replacement but the same happens.
View 4 Replies View RelatedHow to Change the OS Name in Windows Boot Manager ?
View 0 Replies View Relatedihave windows 8 my lpatop is acer aspire E1-531, I am trying to install windows 7 but boot manager wont show me dvd boot !! it show me only network boot what can i do to be able to boot from dvd
View 2 Replies View RelatedI have been getting problems when booting. Whenever I boot the windows startup animation stops until I press enter. Then it spots again for a couple minutes until I press enter. I tried clean boot and safe mode which did not help.
View 8 Replies View RelatedSomeone brought me their laptop yesterday, not usually my kinda thing to do repairs but I thought it was gonna be a software issue but no constant BSoDs on Vista so I figured I'd install 7 which worked fine for a bit but it was still playing up given it was a fresh install and then some more blue screens! I ran Windows Memory Diagnostic and it said there were errors within seconds but I couldn't get back onto 7 to view them. This morning I cleaned it out and swapped the memory to the other port but the screen wouldn't even switch on then, so I put it back and made sure it was seated properly and ran memory diagnostic again and no errors! Success! The only thing is, the fan isn't spinning it spins for about 5 seconds but then nothing and I imagine soon enough it'll overheat.
View 1 Replies View RelatedI am choosing which OS to boot by changing the boot order in my BIOS. To me, this seems clean and simple. I built 32 bit XP on one disk, then removed that disk from my system, installed a different disk, and built 64 bit Windows 7.
When both disks are installed, I change the boot order to select the OS I want, and each OS sees and can use the files on either disk.
Am I asking for trouble here, or is this as clean as I think it is? What I want is one set of user document files which can be used from whichever OS has been booted.
I tried to install WIN 7 to a NEW HD (clean install) since you cannot do a WIN XP upgrade install. I left my old C: drive (WIN XP) hooked up while I installed WIN 7 to the NEW drive. Afterward I decided that my computer is too slow to effectively run WIN 7 so I took the NEW drive out (WIN 7 installation) and intend to put it in a new faster computer.Now when I try to boot up my old C: drive with WIN XP, I get a WIN 7 Boot Manager. What a PAIN in the A--. How do I get rid of the Boot Manager so my WIN XP will boot up normally?
View 1 Replies View RelatedI have a windows 7 home premium 64 bit. And when i start the system i get the following message.Boot Manager:Windows failed to start. A recent hardware of software change might be the cause. To fix the problem:1.Insert your Windows installation disc and restart the computer.2.Choose your language settings, and then click "Next".3.Click "Repair your computer."If you do not have this disc, contact your system administrator or computer manufacturer for assistance.Info: an error occurred while attempting to read the boot configuration dataI searched the forums. But unfortunately i don have the installation disc.Is there any other way to get through this.
View 1 Replies View Relatedon power up the computer goes to a screen and at the top says Windows Boot Manager. insert windows disc. language, repair, Status: 0xc000000f
info: boot selection failed because a required device is inaccessible. So, I hit enter and it always goes back to same screen. I will not let me F8!!! I will let me F2 and F12. I do not have any disc to reinstall windows.
I have a system running XP. I partitioned my drive in half and installed Windows 7. I tried to start XP again and messed it up. I think it's trying to use XPs boot manager. Do I need to re-install 7 to use it's boot manager?
Now that I know this .iso works great, I want to put 7 on a partition on my main Vista system. I can't afford to lose everything like I did on the XP system. When I tried to start XP after installing 7 I got an error. "windows root system32 hal.dll is missing or corrupt"
I can't have that happening to my main system. Is this normal? Did I do something wrong? Will it happen to Vista?
I had 2 partitions on my HDD, one for windows 7 and one for backup. I wanted to reinstall windows but keep the backup partition so i put in my install dvd and booted up from it. At the manage partitions point i think i saw 5 partitions:
The 100mb for windows files
The windows Partition
The Backup Partition
A 1megabyte partition
And a zero megabyte partition.
I deleted all the partitions except the backup. I made a new one for windows. I procceed with the installation and everything went good,until when the installer rebooted the system. And thats where's my problem. The bios detects the HDD and stops there.It happend with me before with my 500gb hdd and thats why i bought this 1tb one but now i dont want to spend money again for that if i dont have to. Maybe i deleted a partition that was for the hdd to work propely? And if so is there anyway to reset that?
I have a Lenovo ThinkPad X60 laptop with Win7 32-bit Ultimate and an SSD (I know, I know, just go with it. I'm building a desktop soon). I could list the specs, but that's useless for this problem (I'd think).
At times (not always), when either resuming from hibernate or booting up from a shut down, the computer generally freezes at the point right after the BIOS screen. So it's just a black screen. This is before the window that says "starting up" (literally a window... the Windows logo). Whenever it freezes, it NEVER goes to the boot screen of Windows. I'm assuming this is an error with the hard drive, since the OS is on the SSD and the boot screen is from the mobo. However, this only started happening after a rather heavy fall to the ground that cracked many parts of the plastic shell on the computer. It still works occasionally when I can get it to boot up (nothing different when it boots up... same settings and everything. Spontaneous).
I have tried:
1) Cold reboot
2) Removing battery
3) Going off only battery
4) Unplugging EVERYTHING from the computer
I have not tried chkdsk yet. Is it necessary? Also, would there be a log somewhere of what happened? It never booted into Windows.
We just build a new system to play around with the Intel Rapid Matrix RAID
Asus P8P67 MB + 8GB RAM+ I5 2500K + 2xWD BLUE HD SATA 6 IN SATA 0 and SATA 1 ( SETUP AS RAID Mirror)We install the Window Ultimate 64 Bit in the RAID Drive .... No problem after all the drive install We also allocate 50GB for doing a image backup (Drive F) We restart the system and goto BIOS to set the HD from RAID to AHCI ( This is the situation happen when the BIOS reset)
Supprise me the system can boot form the Drive ...... (In Device Manager .... I see two WD 1TB HD instead of one 1TB RAID Drive) But when I use Disk Manager it takes really long time to run... I can't wait for that long and shut down) On My computer I only see one HD with 4 Partitation ...
I restart the system and Goto the BIOS to reset back to RAID...and it give error..
I but the W7 Ultimate Boot disk to repair but no success.. Try to load the Backup Image .... cannot find it...
From the old time .... if the BIOS reset it will set to IDE Mode ... Then I am'not able to login to window it will come up blue screen and I just reset to RAID it will fine.... But nowadays... the New MB set Default AS AHCI...then I encounter this issue.... Lucky ... we just testing the new system now..
If I have a cooperate customer want to setup a RAID drive and suddenly Power Cut Down.... BIOS reset..
Windows 7 ultimate 32 bit suddenly switched off, reboot does not show on screen which reads "HDMI CHECK SIGNAL CABLE". Using ATI HD4350 fanless with heatsink connected via HDMI lead. tried another monitor using white dvi cable monitor stays blank then shows power saving mode. So that eliminates the monitor & hdmi lead. Could a duff graphics card show this error? No on board graphics. Unable to get into bios no bleeps, Windows 7 dvd no good either, all fans come on and motherboard MSI X58 on board indicator light goes from amber to green when pc turn on so m/b must be ok.
View 7 Replies View RelatedIn the chaos of moving to a new house yesterday, a box my friend was moving ripped and a bottle of beer smashed onto my open and powered on laptop, scattering both liquid and glass everywhere. We immediately powered down and removed the battery, and placed the laptop upside down and mopped up the excess liquid from the outside as much as possible, and set it to dry upside down on a towel.My laptop is a Lenovo U330, I had my brother install Windows 7 on it for me last year, but he kept the disks so I don't have any of them.Several hours & some blowdrying later, we attempted to start up the laptop (I would have preferred to wait longer, but I needed to know if mine would work in case I needed to borrow my friend's for the week). The laptop will load the lenovo startup screen, and then flash the windows loadings screen (with the option to press f2 or f12) for a few seconds before recommending that I run startup repair. Which if I select it, will freeze after a few seconds. Usually my laptop's pretty noisy, but while the battery light flashes as if there is activity going on, there's no noise coming from it at all.
View 7 Replies View RelatedFirst off, Windows 7 is very cool; I might use it more than vista now that I got internet for it, but that will have to wait for a month or two. My first question is: when I boot up my comp, and I have to pick either vista or Windows 7 (I have Windows 7 on another partition), I usually leave the room while my comp is booting, so after 30 seconds the BIOS picks Windows 7 as the default OS because its first. I would really like to boot up my pc while doing something else, and I would love for the BIOS to pick Vista after 30 seconds instead of Windows 7 because I use Vista for games and such. Is there some way of doing that or do I have to sit around throughout the start up and manually pick Vista?
My second question seems a little picky or over the edge, but when I boot up my comp and have to pick an OS, it prints "Windows 7" while underneath it it prints out "Microsoft Windows Vista". Is there some way to add 'Microsoft' in front of Windows 7 when Im picking in the BIOS? It doesn't look as good without the Microsoft.
Sometime when i turn on the PC , all fans are running but nothing boot up no beep sound either. I have to push and hold on power butt to utrn it off then turn it on again couple time to get it to boot up but then it freez up in few min!I have try to boot in bios mode but get same problem it freez!!! when i try to do memories test it tell me i have hardware problem and again it ran memories test for 2 min then free
View 6 Replies View RelatedHall drivers/updates for my new build are complete, and when i boot, the first asus bios screen comes up, then displays components (as usual), but then goes back to the first start up bios screen. This cycle happens three times before "starting windows" comes up (i have windows 7 ultimate 64-bit). I have a OCZ vertex 3 60Gb SSD, i5 2500k, asus p8z68-v pro, corsair vengeance 8gb cl8 1600mhz ram, and to get to the windows screen takes 40 seconds. Can anyone explain why it is displaying the bios start up screen three times before 'starting windows?'
View 4 Replies View RelatedI just swapped out my old motherboard since it was quite rubbish (really old packard bell m-atx board) for a brand new ASrock P5B-DE motherboard.
However after installing the board and plugging everything back in exactly where it came from on the old board, the PC cant boot into windows 7 64bit. I've tried the repair option and it doesn't work.
I've tried disabling and enabling various options in the BIOS. Also tried removing the memory and only using 1 stick then tried both sticks in different slots and that hasn't changed anything.
I've tried inserting my Win7 CD but it doesn't seem to boot from the DVD drive (will keep trying to see if it can).
System specs are:
Intel core 2 Quad Q6600 @ 2.4GHz (using Freezer Pro7 CPU cooler)
Samsung DDR2 800mhz Ram (2GB x 2)
160GB 7200RPM Hitachi HDD
ATI (XFX) 5830 1GB GPU
Zalman 500W PSU
my next point of call is to try a lower end GPU as i've still got my Nvidia GTS 250 and doesn't use any external power from the PSU.
(P.S. I'm not overly bothered about doing a clean install as i recently did one anyway and I haven't had a huge amount of programs installed on the pc since then. But if I can fix this without a clean install that would be preferable)
I updated the Bios from toshiba site after that my windows won't start and I can't even get to Bios setup (F2) or Boot sequence (F12). and windows get stuck as soon it starts. I can't even access to Factory Restore. I have no image. For information I am using Toshiba Qosmio X770-107
View 11 Replies View Relatedwhen we compress the disk space entirely by going to my computer --> right click on the c: drive icon ---> properties ---> compress disk drive, the compression utility in win 7 accidently may compress the boot manager files that include the file bootsect.bak and the boot folder also . when the computer is restarted the machine hangs up and says "boot manager is compressed " and shuts down .at the prompt type notepad (since the recovery option boots from a seperate wim image it has notepad built into it ) press ctrl + o which invokes the open file dialog go to the open file field (ALT+N) and type c:oot and also see for the c:ootmgr file. right click it and deselect the option of "compress files to save disk space" when we apply the boot manager is again decompressed. also if someone finds this harder we can directly deselect the compression option by reversing the process used to compress the drive thats it . we are done
View 1 Replies View RelatedI used to have both XP & 7 & removed XP. I used to have to select from a black & white screen called Windows Boot Manager. Now it shows only 7 and I have to select it. How do I get rid of this screen?
View 1 Replies View Related