HDD Stops At Windows Boot Screen After Trying To Reinstall Windows?
Jul 5, 2011
I had 2 partitions on my HDD, one for windows 7 and one for backup. I wanted to reinstall windows but keep the backup partition so i put in my install dvd and booted up from it. At the manage partitions point i think i saw 5 partitions:
The 100mb for windows files
The windows Partition
The Backup Partition
A 1megabyte partition
And a zero megabyte partition.
I deleted all the partitions except the backup. I made a new one for windows. I procceed with the installation and everything went good,until when the installer rebooted the system. And thats where's my problem. The bios detects the HDD and stops there.It happend with me before with my 500gb hdd and thats why i bought this 1tb one but now i dont want to spend money again for that if i dont have to. Maybe i deleted a partition that was for the hdd to work propely? And if so is there anyway to reset that?
Everytime I boot up the keyboard works for me to go to BIOS or Boot menu but once I get to the login page it stops working. I noticed that people are saying disable device signature enforcement or something but I can't find that in my BIOS. I have an Asus motherboard model - M4A88t -V
I have installed WIN 7 64 and it has developed a problem..It wont boot to the desk top. It will post and go to the starting Windows screen and stops there..It wont go to safe mode.Is there a way to make a boot disk to get it to start or any kind of a diagnostic disk that a dummy can do?
I recently reformatted my hard drive and reinstalled windows 7 on a computer that's been having freezing problems.After I installed my display driver for my video card, I can't get past the welcome screen after I log in.I can boot up properly in safe mode, and when I disable my video card in my device manager, then I can log in fine. I haven't made any hardware changes since I first built the PC and I've tried updating the drivers to a later version.Is there anyone that's had or problem like this before or know of a solution?Specs are as follows:* OS: Windows 7 Pro 32-Bit* CPU: AMD Phenom II x4 925* Video Card: nVidia Geforce GTS 450* Power Supply: Corsair Builder Series CX430* Hard Drive: Seagate Barracuda 7200.11
I already went to "msconfig" and chose my default OS. Bios still stops at the Windows Boot Manager to show me the only OS there is for me to choose/use. How can I go straight to my desktop without the Boot Manager?
My PC goes through the BIOS stage and starts to load Windows 7, the GUI comes up and then it just stays there, goes into space with nothing happening. I have booted in Safe Mode and that works, but it won't boot into Safe with Command Prompt or Networking. I have tried the Repair my Computer option but that did not fix it. Then I did a System Restore but that did not fix it either. Not sure as to what to do next.
I never get a blue screen, the computer never just restarts, the mouse just seems to stop moving, and this has been happening since I got my computer about 3 months ago. Whenever this happens all I can do is turn the power off and restart. Going through my event logs the only common occurrence is that right before I am turning off my computer I get "Filter Manager - Event ID - 6". This is not recorded as an error, but happens right before "Kernel Power - Event ID - 41" which I believe is when I push the power button to restart.
I have been getting problems when booting. Whenever I boot the windows startup animation stops until I press enter. Then it spots again for a couple minutes until I press enter. I tried clean boot and safe mode which did not help.
my copy of win 7 was getting increasingly ropey the other week (kept freezing etc.) but i was able to start it in safe mode. now it won't boot at all, when i try to start it form the hard disc it says 'loading files' with a white bar along the bottom which crawls up, i have left this for hours with no joy. when i try to reinstall it gets as far as letting me select the language and then just hangs with the busy mouse icon, again i have left for ages with no joy. so the OS seems to be corrupted and sadly i have files on the OS section of the disc (yes i know....backup!) which i need.
so i assume i somehow need to get another OS to work to back my stuff up and then format the hard disc.
i saw you can in theory run linux from a memory stick, enabling me to back the files up. running xp from a stick is another option which i tried but my laptop didn't seem to boot from it, despite being set to do so. i have another laptop, aswell as a device which can use a sata/ide hard disc as usb disc, could i maybe remove the hard disc and do this ?
A couple weekends ago when I was using my laptop, I fell asleep and awoke to find that it had turned itself off. I rebooted it to find that after the BIOS screen, nothing happened: I just got a blank screen with a cursor. I have seen this thread but unlike the fellow there, I had no problems at all just doing a clean install from a USB drive, as I'd done the same only a week or two before and didn't exactly have much data to lose. The install went completely fine, including the two restarts required, right up to the "Welcome" screen after connecting to a network, upon which it went to "Shutting down", did so, and I was once again back where I'd started, with the blank screen and flashing, immobile cursor and nothing else.I've tried re-creating my bootable USB drive, and the sfc /scannow command in Windows Repair options wouldn't run, saying that I have a process already running that requires Windows to restart (which I can't do, and which doesn't go away even after yet another reinstall).I've tried reformatting and recreating the partition (I have just the one) before installing as well.The laptop is fairly old: a four-year old Acer Aspire:
All I know off the top of my head; will give more info if it's needed.Because I was able to install Windows 7 completely right up to the Welcome screen after which my desktop should have been prepared,I don't think this is a hard drive issue.When reinstalling Windows 7 on it,it recognized that Windows 7 was already on it and correctly gave me the size and space remaining on the drive.
About a month ago I had to reinstall Windows 7 Home Premium because it had the win64/sirefef virus. Security essentials would not work and neither would the windows firewall, etc.I have the virus again somehow, but this time when I try to boot it into safe mode and do a system restore or back up my files I can't - it says windows restore won't work and there is a critical error and will restart in 1 minute (this happened last time as well except not in safe mode and I was able to do the restore - but the critical error was occurring in regular mode). How do I backup my files (I have new files since the last time) and reinstall without the discs?
I have an HP pavilion dv4-1555dx laptop that I was trying to install Linux mint 10 gnome on a PNY 8GB flash drive, I forgot to have Linux install grub to the flash drive, so it ended up installing grub to the HDD, now I need to reinstall the windows 7 boot loader but HP didn't send a windows 7 boot disk with the system (OEM windows 7) so I can't jut boot the cd and use the recovery counsel unless there is somewhere online that I can get an iso from, or is there another way?
So, had to install XP beside Windows 7 64bit... Windows 7 64bit was installed while in BIOS hdd was set as AHCI.To install XP, I've to put it to IDE. Now if I put AHCI i can boot in Windows 7, but not in XP(BSOD), if I put IDE can't boot in Windows 7(BSOD), can in XP. Downloaded AHCI driver for my MB (MSI P55-GD55) and can't install them in XP, says no system requirements.What to do? Is there a way to boot with IDE to windows 7 64bit without reinstall?
I recently installed Windows 7 professional and had some problems with my first install, so I decided to reinstall. In the course of getting everything working on the the second install the Windows Boot Manager comes up everytime I turn on the computer.
It is very strange because: I have only Windows 7 installed on my computer and no other OS. The only selection is one instance of Windows 7 (I know sometimes when you reinstall the same OS will be listed twice, this is not the case for me) there is no countdown timer to automatically start windows. I have to press the enter key or it just stays there. Other than that, windows 7 is working fine for me. It is very annoying since I sometimes leave the computer after I turn it on and when I'm back it still is on the Boot Manager.
These are the things I have tried to get it working: I've went to msconfig-->Boot Tab and looked to see if there was a more than one OS listed. There is only one instance of Windows 7 listed. I went to my computer properties-->advanced system settings-->advanced and set the boot manager to not run, but it still comes up even after I change this setting I also tried reinstalling windows 7 twice. Once with just formatting the partition. Once with deleting the partition and recreating it before the install.
Problem description: Windows 7 fails to boot. I was playing a game when I was no longer to input anything (kb/mouse stopped working) although animations and sound continued. I restarted and the windows 7 animation appears, plays for awhile then freezes. I can start in safemode but that's it. Attempting to run the recovery tool gives me a "windows loading" screen then goes to a black screen. On my initial install of windows 7 on a brand new HD a week ago I had no problems getting it up and running.
Attempted fixes: System restore. Last good configuration. Uninstall video drivers. I tried doing a new install but all having the DVD in does is give me "loading windows" screen prior to freezing at the windows 7 animation. I tried putting in a vista disk and I get a similar problem, it hangs at the loading windows animated bar, but without the logo. I even tried putting in a brand new HD and disconnecting the old one and it STILL starts trying to load windows 7 (with the install dvd in), and it will still freeze with the vista disk in.
I have a laptop that came with windows 7 installed. It has single hard drive which I have sectioned into c drive and d drive. I have made this laptop dual boot with windows 7 which was already installed and server 2008r2. My server 2008r2 copy is about to expire.So I will have to reinstall the server 2008r2. I am little confused because when I log onto server 2008r2, the C drive becomes the drive where windows(server2008r2) is installed. And similarly when I boot into windows 7 then c drive becomes where windows(windows 7) is installed. So if I were to keep windows 7 intact and reinstall server 2008r2 then,what exact steps will I have to follow to just reinstall a fresh copy of server 2008r2 trial valid again for 6 months? Please guide me. I am totally confused and dont know how to do it.I have important data on laptop so don't want to loose it.
My system opened with a red screen and I havent been able to get passed that screen. I tried to reinstall my windows 7 install disk, but all it did was keep getting to the make user name and password screen and from there just started over with the loading files screen. It would never complete the install.
So this started out as a driver issue - I couldn't seem to install the updated drivers for my ati radeon hd 5 series (I don't have access to my actual specs right now) video card no matter what I tried. Each time it would seemingly revert to the awful on-board graphics and I would have to perform a system restore to correct it. Rinse and repeat. Eventually, I tried one forum poster's recommendation of updating my bios, which managed to bork the computer so bad that it broke the system restore function altogether. So, time to reinstall windows.The computer is a dell xps9100 and didn't come with a windows 7 cd, so I restored to the factory image of windows 7 through the advanced boot menu. It seemed to work, but when it rebooted I got the windows logo and then nothing (black screen, no cursor).
I find that the Windows 7 boot screen slows down the boot process on my machine. Is there a way to restore the old Vista scrolling loading bar? I know it's there as my netbook uses it.
6 months ago I installed windows 7 on a new PC I built. I then decided to switch to a 64 bit system which I did. I bought another HDD and decide to add a second drive with windows XP.I ended up with a system which had windows 7 shown twice on boot up and only one would bring up windows 7. Windows XP was missing. I removed the second drive and it worked fine but I still had 2 Win 7 prompts on boot up.I have a virus or root kit which I can't find or remove so I decided to format the C partition and reload windows 7. The problem is although I have the bios set to boot from the cd with the Win 7 disk, it comes up with the boot manager missing message and I can't get around this.I tried another HDD and get the same message. How do I get rid of this problem where i can re install win 7?
I recently got a new ssd and installed Windows 7 on it (I used the oem code on the bottom of my laptop [Lenovo Y580] along with the iso from digitalriver). It's been... well, as good as you can expect windows to be up until yesterday. When I booted the laptop into Windows, I had no internet despite having an ethernet cable connected. I checked to make sure it wasn't just my router. Sure enough, wifi and ethernet work perfectly in Ubuntu. I went into windows again and checked if I had the latest drivers. I did, so I tried reinstalling them and everything worked fine. Until I restarted. Every single time I restart I need to reinstall my wifi and ethernet drivers. It takes seconds, but it's still annoying and shouldn't be happening.
I used to have Windows 7 which works flawlessly... I used to have linux Mint 11 dual booting with Windows 7, I recently upgraded to Linux Mint 12 and from that upgrade I cannot see the windows 7 option in the boot menu.. I tried to reinstall the boot loader of windows 7 from the Windows 7 CD but when I press "Repair Your Computer" then it does not show any operating system existing on my computer... install the boot menu in the MBR again.
Upon turning on the computer, the recovery console loads - because windows will not boot.
Performed system dianogtic check - everything looks good. Performed a system recovery successful but computer will not boot. Performed a reset to factory settings successfully, but computer will not boot. performed a command prompt reset - as was listed in another topic.
I have an HP G62 laptop which came pre-installed with Windows 7. I would like to fully remove all data on the HDD and reinstall Windows 7.The 'Computer' section of the Start button shows the following HDD (not sure if these are partitions or not, but I'm assuming that they are!):
Local Disk ( C: ) Recovery ( D: ) HP_TOOLS ( F: )
I had a quick look at the D: drive and it showed a few setup files, all of which seem to be related to MSOFFICE. :-?I have been reading about data destruction programs that will absolutely wipe the drive and remove all data; I would like to do this and then reinstall Windows 7 so that the laptop effectively becomes a 'new' one.
1. How do I go about formatting the HDD with a data destruction program and then reinstall Win 7, since I do not have a bootable disc?
2. How reliable are such data destruction programs? Is there any margin of error? (I am a bit concerned about all the sensitive information that I have saved on my laptop such as bank details, family photos, etc.)
Someone brought me their laptop yesterday, not usually my kinda thing to do repairs but I thought it was gonna be a software issue but no constant BSoDs on Vista so I figured I'd install 7 which worked fine for a bit but it was still playing up given it was a fresh install and then some more blue screens! I ran Windows Memory Diagnostic and it said there were errors within seconds but I couldn't get back onto 7 to view them. This morning I cleaned it out and swapped the memory to the other port but the screen wouldn't even switch on then, so I put it back and made sure it was seated properly and ran memory diagnostic again and no errors! Success! The only thing is, the fan isn't spinning it spins for about 5 seconds but then nothing and I imagine soon enough it'll overheat.
Initially, it only appeared on first boot (before Windows logo loading screen) and after restart system booted up normally. For some 4-5 days now, it crashes with a BSOD and after restart the system freezes on desktop. One more restart and works again.Sometimes just a black screen appears and everything stops, before the desktop is loaded.It has also happened that the laptop hangs on BIOS logo.BSOD error messages I managed to record are1) IRQL_NOT_LESS_OR_EQUAL 0x000000D1 [...] igdlkmd32.sys2) BUGCODE_USB_DRIVER STOP 0x000000FE [...] USBPORT.SYS3) Empty BSOD with only 1 line: 'STOP 0x000000314) MEMORY MANAGEMENT 0x0000001AI updated the drivers with Driver Genius, some other driver update software and also performed some online driver scans.Memtest results - No errors found.Ran thorough diskcheck in Windows.Windows was reinstalled recently, problems remained.The system has been sent for diagnostics and repair several times, specialists say they see nothing wrong with it. And when I take it home it crashes again.
I'll try to explain as best I can. I have a custom built pc, running Windows 7 ultimate 64 bit, 8 GB RAM, Intel LGA 775 motherboard, Intel Xeon 2.4 Quad processor, 550 watt power supply and nvidia GeForce 9800 GT graphics card. I do audio recording, and use an external audio interface (novation x-station 49). My computer has ran flawlessly for the past year or so, now my 2 (22" Samsung) monitors go black after a few minutes. It started out once or twice a day, now it only takes about 5 minutes.
My first thought was the video card (because both monitors go black) which I'm still in the 5 year warrantee period, so I can get it replaced. Everything is normal, then I get a second of messed up screens, then it goes black. When the screens are messed up, they look like the one referring to bad video card ram in this link... Diagnose video card problems by comparing with example corrupted screens
I have begun to experience an issue with a Nividia GeForce 7300 Video graphics card. It happens when I am playing solitare or writing an email, which is the screen freezes and I have to turn off the computer to regain the monitor function or the computer. The message that I captured in relationship to the issue is WD-20110802-1520.dmp syndata.xml WERInternalMetadata.xml - Video Hardware Error.I have also seen a pop-up that says the NVIDIA card has stopped and successfully recovered.
