I'll try to explain as best I can. I have a custom built pc, running Windows 7 ultimate 64 bit, 8 GB RAM, Intel LGA 775 motherboard, Intel Xeon 2.4 Quad processor, 550 watt power supply and nvidia GeForce 9800 GT graphics card. I do audio recording, and use an external audio interface (novation x-station 49). My computer has ran flawlessly for the past year or so, now my 2 (22" Samsung) monitors go black after a few minutes. It started out once or twice a day, now it only takes about 5 minutes.
My first thought was the video card (because both monitors go black) which I'm still in the 5 year warrantee period, so I can get it replaced. Everything is normal, then I get a second of messed up screens, then it goes black. When the screens are messed up, they look like the one referring to bad video card ram in this link... Diagnose video card problems by comparing with example corrupted screens
Initially, it only appeared on first boot (before Windows logo loading screen) and after restart system booted up normally. For some 4-5 days now, it crashes with a BSOD and after restart the system freezes on desktop. One more restart and works again.Sometimes just a black screen appears and everything stops, before the desktop is loaded.It has also happened that the laptop hangs on BIOS logo.BSOD error messages I managed to record are1) IRQL_NOT_LESS_OR_EQUAL 0x000000D1 [...] igdlkmd32.sys2) BUGCODE_USB_DRIVER STOP 0x000000FE [...] USBPORT.SYS3) Empty BSOD with only 1 line: 'STOP 0x000000314) MEMORY MANAGEMENT 0x0000001AI updated the drivers with Driver Genius, some other driver update software and also performed some online driver scans.Memtest results - No errors found.Ran thorough diskcheck in Windows.Windows was reinstalled recently, problems remained.The system has been sent for diagnostics and repair several times, specialists say they see nothing wrong with it. And when I take it home it crashes again.
the screen glitches with pink, white, and green tiles and lines, the cursor disappears, the screen goes black, and the hard drive stops spinning. All the lights on the front of the computer stay on, the fans stay on, and the monitor doesn't say anything about not receiving a signal. The first time it happened I tried turning it on right away and it booted up and let me sign in, but as it was loading the desktop and icons it glitched again, and froze. after I shut down and let it sit for a while it worked just fine until the next day when it did the same thing again, but twice in one day and with a shorter time between freezes. Today I had a WerFault.exe error pop up and when I clicked ok on it the bottom half of my screen turned pinkish and the computer froze when I restarted the pink tone was still there but it did not show up on any windows that I opened and when the background changed it went away.
sadly my SD card stops working from my HP computer,i updated the drivers but still is not working,when i put my SD card on it i see lights but my computer is not detecting it,
I never get a blue screen, the computer never just restarts, the mouse just seems to stop moving, and this has been happening since I got my computer about 3 months ago. Whenever this happens all I can do is turn the power off and restart. Going through my event logs the only common occurrence is that right before I am turning off my computer I get "Filter Manager - Event ID - 6". This is not recorded as an error, but happens right before "Kernel Power - Event ID - 41" which I believe is when I push the power button to restart.
So I have a little problem with my mouse and keyboard. It stops working at the login screen. The same thing happens when I try to log on safe mode, etc.
Everytime I boot up the keyboard works for me to go to BIOS or Boot menu but once I get to the login page it stops working. I noticed that people are saying disable device signature enforcement or something but I can't find that in my BIOS. I have an Asus motherboard model - M4A88t -V
Over the last few days, my computer has been freezing. Before it freezes I repeatedly get a black screen flashing up and then a message that my graphics driver wasn't working but is has been repaired. It does this about 5 times, before completely freezing (ctrl + alt + del doesn't do anything). I have forced it to shut down and started it up, and it works for about 1 minute. At the time I was using microsoft one note (which I haven't had any problems with before), and google chrome, which I have only recently installed. I tried uninstalling chrome and using IE but it did the same after about only a minute of being switched on.My laptop is about 4 years old, but I've only had problems over the last few days. I'm currenly using safe mode, and I'm not having any crashing/freezing.
I just moved to a new apartment. I packed the Computer in a padded box and transported it in my car. I finally set my desktop up and I now have the dreaded black screen. No beeps, all fans, lights, hd lights are running. I swapped my ram first and still persistent. I reinstalled my video card same thing.
my screen goes all black for a couple of seconds then when it returns the open tabs/sites are kinda inactive for another couple of seconds, or when i click on another window, it is highlighted but the content is of another site/tab. when this happens, there is usually a message at the bottom left of the screen that "Display driver has stopped working and recovered problems"
I tried to verify whether the F8 restore factory function is working in my dell inspiron 1545. I got this error -
Windows failed to start. A Recent hardware or software change might be the cause. To fix the problem:
1. Insert your windows installation disc and restart your computer.
2. Choose your langugae settings, and then click next
3. Click "repair your computer."
Status: 0xc000000e Info: The boot selection failed because a required device is inaccessible.
there is only one operation system - windows 7 home premium installed. it boots correctly. I found a thread at - Windows 7, "Repair your computer" F8 boot option not working (SOLVED) | Knowledge Base. it utilizes bcdedit to fix the problems.
for my case, the output of bcdedit /enum all shows unknown device as well. but I also noticed my output has 2 different guids. i have no idea which one indicates which partition at all. there is the output of bcdedit.
Code: Windows Boot Manager -------------------- identifier {bootmgr} device unknown
well my screen keeps going black, i restarted, then it stopped bt wanted to make sure the monitor is working fine, well, i installed skimcleaner, a few days ago or maybe earlier, computer hasn't speed up.
I'm having some serious troubles with my main PC, my gaming PC, and it's really messing things up for me. I was just parusing around like usual on my computer, it runs Windows 7, and I allowed it to download the usual updates and restart itself. When it shut down and began restarting, I notice that it loads up the logo, briefly flashes what I think is called a Bios Post page, and then goes to a page that is nothing but a blinking "__" sign. It does nothing here, won't continue, and I can't enter or do anything. It just endlessly blinks, before disappearing and the computer screen shows nothing but black.
I'm having random crashes during general usage on my pc. Attached you will(hopefully) find bsod logs. I have run memtest already and it came back ok. I have also updated to latest nvidia drivers and it still happens.This is a nearly fresh install of windows 7 and i have loaded minimal software onto it since install a week or so ago.
just put together a new computer and I'm having trouble booting it up. All the lights on the MoBo, and the fans are running, the fan on my GPU seems like its going at max speed.
When I try to start up, the computer starts, then turns off for about 2 seconds, then starts up again, and stays on until i turn it off. Theres only 1 short beep when I start it up. I am using a HDMI cable from my monitor to my graphics card, and it just says " no signal "
Heres the new system i've put together. ASUS Maximus IV Extreme-Z, Socket-1155 E-ATX, Z68, DDR3, 4xPCIe(2.0)x16, CFX&SLI, NF200, SATA 6Gb/s, USB 3.0,EFI Corsair SSD Force Series� 3, 60GB
When I turn my computer on nothing happens. The power light comes on and I hear ONLY the fans turning. Nothing happens on the screen, it just stays black. It does say NO VGA signal.
I can turn on my computer but the screen is black, cd works, but nothing on screen. Toshiba Satellite. Any hot key combinations that will reboot to normal?
My computer is definitely running with the cooler working at what not except no vision on the monitor. I've tried re-organizing the rams but it results in the computer starting up, shutting down, starting up shutting down. [code]
A few weeks ago I went to download a game and it wouldnt get download right. the time left count down went up and stopped in the middle. Also I keep getting the black screen when I turn on my computer, what do I do?
I am new here so apologies for being a newbie. I have a mid ranged gaming tower from ncix. That's about 7 months old. Its a 64bit windows 7 with 12gbs ram and 1tb hard drive.I was playing Starcraft with friends earlier today when suddenly the computer restarted during the match and was unable to boot up again after the sudden restart.It hangs at a black screen with the blinking underscore.
My friend was having problems with her computer. So I ran a few programs to check it out and clean it up.. (AVG, CCleaner, AntiMalware...) But then after running the last one and rebooting, the screen goes black once Windows starts to load. Then the mouse appears but still nothing. I tried safe mode and still nothing... Not sure what to do, but just gaining access to copy files to an external hard drive is important. I was planning to reformat anyways..
have some serious problems with my computer. I get black screen everytime I play games, like World of Warcraft and Counter Strike: Source.In another Thread there was a guy with the same problem, he attached the MX-4 somehow and I don't know what that is, is it something you buy or is it something you download? The MX-4 seemed to be working for him so I wanna try that.
Just got myself this (old) new computer, that I was going to use for a media center. But it randomly crashes, and i can't seem to figure out why. I formated it yesterday, so I doubt it would be a virus.Sometimes it goes black, and picture returns within a few seconds, but other times it freezes up completely. When I restart it (with the power button) I cant get pasted the BIOS screen, but if I unplug the power supply, and hit the power button a few times and then plug in the power, it starts up like normal. (does that make it a RAM issue?)Freezes have happened doing the following: Using XBMC (both in menus and while watching a video), while Internet Download Manager was running. While file transfer was running, and a few times while i wasnt at the computer.Specs:Windows 7 Ultimate x64ATI Radeon HD 5670Intel Core i3 CPU6GB RAMPhillips TV (Connected with HDMI)
When I'm playing certain video games, like Battlefield Play4Free, sometimes, my computer lag spikes and then my screen flashes black. Then the lag's gone. After that, in the tray notification area, I get a message saying, "Display driver Igfx stopped responding and successfully recovered".
I got this problem with my new computer which is when i play games recently the screen turns black (sometimes dark blue and with stripes looking graphics all over the screen). This have been happening sometimes in a week or 2 and sometimes it doesn't turn black but just get like a freeze for a few seconds and then go back to normal.it's starting to scare me since my last computer which was a laptop had the same problem, but there was no saving it.This computer is just a few months old, it has good RAM, CPU and graphics card.
my computer boots up to a black screen with a mouse. The problem is, when I boot from anything or into any option I get this. Safe Mode gets me black screen, so does booting from a Win 7 Recovery disk, everything puts me in a black screen with cursor. At first it will show Windows logo on the screen, with loading bar, then cuts out, and cursor pops up. That's it.Also, when I try to boot normally, it hangs at Windows logo, then flashes a quick blue screen then reboots.
A few days ago my home built windows 7 computer did an automatic download. After the download installed itself I tried to turn on my computer. I got a black screen on my monitor. Was this download a virus?
I have a gateway computer that is infected with a virus. I was able to load the computer in safe mode a couple of times before it no longer loaded login screen for my computer. Now when I cut the computer on there is only a black screen with a white blinking cursor. I have the avira rescue cd and have changed the seetings to boot straight from the cd rom but even after running the rescue disc the computer will not allow me to use the (f) function keys. When I press down on any of the (f) function keys there is a beeping sound but no action. I tried to use a windows reboot cd made from another computer but it does not load on the start up like the avira resue disk does.
I've built my new computer a week ago and I'm having a problem and I need to know ASAP if any part is defective to do a RMA. When I play games, (League of Legends, Cod4,..), my computer randomly crashes on a black screen and a looping bug sound. The monitor says ''Monitor going to sleep''. I've tried to run OCCT on my GPU for about 30 minutes @ 90 degrees C withouth problem. I've done one or two pass in Memtest+ to check my RAM too. Any thoughts on this? Maybe it is my PSU? I've heard about the NVidia HD audio too. Here is my rig:Windows 7 Home Premium 64 bits CPU: Intel Core i5-3570K PSU: COOLER MASTER GX Series 750W CASE: COOLER MASTER HAF 922 MOBO: MSI Z77A-G45 LGA 1155 Intel Z77 GPU: EVGA SuperClocked 012-P3-1573-AR GeForce GTX 570 RAM: G.SKILL Ripjaws X Series 8GB DDR3 1600 HDD: WD Caviar Black 1TB 7200 RPM 64MB Cache
I've built my new computer a week ago and I'm having a problem and I need to know ASAP if any part is defective to do a RMA. When I play games, (League of Legends, Cod4,..), my computer randomly crashes on a black screen and a looping bug sound. The monitor says ''Monitor going to sleep''. I've tried to run OCCT on my GPU for about 30 minutes @ 90 degrees C withouth problem. I've done one or two pass in Memtest+ to check my RAM too. Maybe it is my PSU? I've heard about the NVidia HD audio too. Here is my rig: Windows 7 Home Premium 64 bits CPU: Intel Core i5-3570K PSU: COOLER MASTER GX Series 750W CASE: COOLER MASTER HAF 922 MOBO: MSI Z77A-G45 LGA 1155 Intel Z77 GPU: EVGA SuperClocked 012-P3-1573-AR GeForce GTX 570 RAM: G.SKILL Ripjaws X Series 8GB DDR3 1600 HDD: WD Caviar Black 1TB 7200 RPM 64MB Cache