SD Card Stops Working From HP Computer
Sep 23, 2011sadly my SD card stops working from my HP computer,i updated the drivers but still is not working,when i put my SD card on it i see lights but my computer is not detecting it,
View 9 Repliessadly my SD card stops working from my HP computer,i updated the drivers but still is not working,when i put my SD card on it i see lights but my computer is not detecting it,
View 9 RepliesI have got Lenovo G550 laptop with windows 7 installed in it, and i have BSNL Datacard 3G (3.6 Mbps). When I connect my data card to my laptop the audio driver stops working whereas in case I connect any other usb device the driver doesnt stop working.
View 3 Replies View RelatedI have an Asus X58 motherboard, a pair of ATI 5850 video cards, and a pair of monitors running DVI into the primary 5850 (extended desktop). When I am not running crossfire, my device manager sees 2 5850 cards as does the catalyst control center. I can select "enable crossfire" from the control center; however, when I did that my computer became unresponsive and I had to reboot. When I reboot the computer and click on the performance tab of the catalyst control center, the only option is "AMD Overdrive", the crossfire option is no longer there. The device manager only sees one card. The only way I can get my computer to recognize both cards again is to remove the Xfire cable from the 2 video cards.
View 2 Replies View RelatedI'll try to explain as best I can. I have a custom built pc, running Windows 7 ultimate 64 bit, 8 GB RAM, Intel LGA 775 motherboard, Intel Xeon 2.4 Quad processor, 550 watt power supply and nvidia GeForce 9800 GT graphics card. I do audio recording, and use an external audio interface (novation x-station 49). My computer has ran flawlessly for the past year or so, now my 2 (22" Samsung) monitors go black after a few minutes. It started out once or twice a day, now it only takes about 5 minutes.
My first thought was the video card (because both monitors go black) which I'm still in the 5 year warrantee period, so I can get it replaced. Everything is normal, then I get a second of messed up screens, then it goes black. When the screens are messed up, they look like the one referring to bad video card ram in this link... Diagnose video card problems by comparing with example corrupted screens
Over the last few days, my computer has been freezing. Before it freezes I repeatedly get a black screen flashing up and then a message that my graphics driver wasn't working but is has been repaired. It does this about 5 times, before completely freezing (ctrl + alt + del doesn't do anything). I have forced it to shut down and started it up, and it works for about 1 minute. At the time I was using microsoft one note (which I haven't had any problems with before), and google chrome, which I have only recently installed. I tried uninstalling chrome and using IE but it did the same after about only a minute of being switched on.My laptop is about 4 years old, but I've only had problems over the last few days. I'm currenly using safe mode, and I'm not having any crashing/freezing.
View 2 Replies View RelatedI tried to verify whether the F8 restore factory function is working in my dell inspiron 1545. I got this error -
Windows failed to start. A Recent hardware or software change might be the cause. To fix the problem:
1. Insert your windows installation disc and restart your computer.
2. Choose your langugae settings, and then click next
3. Click "repair your computer."
Status: 0xc000000e
Info: The boot selection failed because a required device is inaccessible.
there is only one operation system - windows 7 home premium installed. it boots correctly. I found a thread at - Windows 7, "Repair your computer" F8 boot option not working (SOLVED) | Knowledge Base. it utilizes bcdedit to fix the problems.
for my case, the output of bcdedit /enum all shows unknown device as well. but I also noticed my output has 2 different guids. i have no idea which one indicates which partition at all. there is the output of bcdedit.
Code:
Windows Boot Manager
--------------------
identifier {bootmgr}
device unknown
[Code].....
I have begun to experience an issue with a Nividia GeForce 7300 Video graphics card. It happens when I am playing solitare or writing an email, which is the screen freezes and I have to turn off the computer to regain the monitor function or the computer. The message that I captured in relationship to the issue is WD-20110802-1520.dmp syndata.xml WERInternalMetadata.xml - Video Hardware Error.I have also seen a pop-up that says the NVIDIA card has stopped and successfully recovered.
View 9 Replies View RelatedI could be on my computer for hours at a time and after approximately 6 hours of being logged in, my internet browser just stops working. When I try going to a web page, it doesn't even try to load. It gives a very quick blink to the icon on the tab but that's it. I'm not receiving any windows errors. The way that I've been working around this problem has been to log off(or shut it down) then log back on, then I have a few more hours before it does it again. When the browser stops working, "bittorrent" still runs (a program that needs internet access). This isn't a recent problem that I'm having. This has been going on for almost a year now.I'm running Windows7.
View 5 Replies View RelatedI have Windows 7. I am using IE 8. My browser will stop working. I do a restart and it will work good for awhile. Then I have do do the same thing about every 5 Min.
View 7 Replies View RelatedI just bought a brand new Dell Optiplex 390 running windows 7 64bit.I plugged in an external USB hub with 3 devices attached (2 cameras and 1 stepper motor controller).At first the computer recognized the three devices and I can communicate with them just fine. After a few minutes, they stop working and the generic USB hub gets this error: This device cannot start. (Code 10)I tried uninstalling the device, I tried updating the drivers (sais drivers are current), nothing works.This hub works fine on windows XP.
View 1 Replies View RelatedI've got winsows 7 x 64, and I am trying to install MSI drivers to my motherboard, but even if I download from their home page, and it is compatible with windows 7 I'll got the message that setup.exe stops working. What should I do? I feel that my PC is slower because it needs these drivers I suppose. And there are 2 unknow devices in the Device Manager
View 1 Replies View RelatedI just bought my laptop, a new toshiba satellite with windows 7 and 64 bit, i tried to install assasins creed 3, but gave me error about "feature transfer error component sound_sfx filedata2.cab error data error (cyclic redundancy check)", i thought it was a game error, but then i realized my dvd reader stops working, i tried to copy the files from the dvd and it stoped working after a while also (it happened with abother DVD too when tried to copy the file to my computer). So i was wondering what can i do
View 2 Replies View Relatedmy keyboard will stop working randomly. ill be typing on my keyboard and then it will just drop all of a sudden until i click with my mouse.
View 2 Replies View Relatedwhenever i open internet explorer 64 bit, a message immediately pops up saying something to the effect of "internet explorer has stopped working. windows is looking for a solution .. blah blah blah" whether i wait for it to tell me to close ie or immediately try to close the message, it just pops up over and over again, making the only way to actually quit ie to go into task manager and end the process (i'm not sure if this is relevant, but when i do that, there are two "iexplore" processes, and only ending the second one (when they're in alphabetical order) actually turns off ie). the program launched from the menu item "internet explorer", which i assume is 32 bit ie, works just fine, as does the no add-ons mode. i have also seen several people asking questions about ie 9 64 bit stopping working on Internet and related sites because of issues with 64 bit flash or the lack thereof. this is not that problem - it freezes immediately upon the start of the program. also, i have just upgraded to service pack 1, but the problem existed before that (i was actually hoping sp1 might fix it, but no luck). i have also uninstalled updates to ie and then re updated to 9, but that didn't help either. (also it is really annoying that that's the closest you're allowed to get to uninstalling ie completely. i would feel much better if i could just exorcise the whole thing and start fresh, but no dice).
unrelated problem: i cannot get the below text about languages to go away. i didn't put it in myself, it appeared when i clicked "preview post". i've deleted it from the text box several times now, but it always reappears when i click preview post.afrikaansalbanianarabicarmenianazerbaijanibasquebelarusianbulgariancatalanchinese (simplified)chinese (traditional)croatianczechdanishdetect languagedutchenglishestonianfilipinofinnishfrenchgaliciangeorgiangermangreekhaitian
[code]....
It used to happen occasionally. Lately IE8 stops working several times a day. I see no rhyme or reason as to why. No changes to the program or computer AFAIK. I'd rather not install IE9.
View 1 Replies View RelatedI have windows7 installed on my laptop and any time i log off my system or just keep it idle for sometime it logs off and the keybaord starts behaving differently.Like when i press the j key it reads it as 1when i press f it reads it 4 and so on.
View 1 Replies View RelatedFor the past couple of days my keyboard starts to go crazy after about 2 hours worth of use. It will not let me type. And, if I hit a letter it will do something else that it shouldn't. For instance, if I hit the "letter" key it opens the file/save as.
I read a very old post here and tried to do what that said. I changed my batteries, cleaned the keyboard, and even used a different keyboard that isn't wireless. The very same thing happens no matter which keyboard I use.
Sometimes if I wait a few minutes and reboot it is fine again (like right now). This just started happening.
I currently bought this Adata USB 3.0, I loved it, and then about 2 days it just stopped working. I own a mac and a pc and tried using it on both of them, no luck. It seems to recognize the USB but it does not show up on "my computer", which is really weird.
View 2 Replies View Relatedin past I did have this problem with Windows 7, and now that I came back (was on XP Sp3), they annoying me again.I have a DELL Vostro 1510. Sometimes, after I turn on the computer and it loads my desktop, the keyboard doesn't work. The weird thing is that the media keys are working fine all the time, however all the letters, caps lock, num lock, F1-F12... well, every single key simply doesn't respond.So I go and check it on the "device manager", and it shows I have a keyboard installed. I scan for hardware changes... and no changes detected... The driver is there, the hardware is perfect (I never had these issues while on XP, and I was with 7 on past, did have these problems, then did migrate to XP, and now back to 7 and having it again).
I know how to solve it... I simply need to go to the device manager, click on uninstall and then "scan hardware for changes" and it comes back to life. If that doesn't work, just need to reboot and Windows 7 install the driver for me (after uninstalling it, of course).The annoying thing is that I don't want to do those steps... I want it to keep always working... And this is just not normal, so for sure there is some cause.DELL doesn't offer drivers for notebook keyboard on their website, at least not for my model, because it's simply a default one... So the default driver should handle it.
i boot the computer, open chrome and start browsing. after a minute (maybe even less) the browser just stops loading web pages, and doesn't pop any errors or messages. the signal exists but it simply won't load. the internet on the other computers works fine. im not sure about this, but i think that it continued loading a Internet video after it stopped working, but wouldn't open any other pages at all. please help me fix this, i'm running 64 bit version of windows 7.
edit: after rebooting it again works for a minute or so and then stops.
I try to burn a cd in realplayer and realplayer stops working and shuts down
View 5 Replies View Relatedwhile using pc, suddenly the a black screen appears, notifying tht the display driver had stopped working
View 1 Replies View Relatedi decided to use a 32" plasma vizio tv for my monitor. connected it through hdmi to my nvidia 460 gtx graphics card. image was terrible, sound did not work for anything but video games (unless i ran the video game then turned on something else like music or a movie), the sound does not work causing whatever program being used to crash. so i said to myself, picture isn't great enough for the sound issue and i disconnected the tv and returned to my old monitor using a vga cable with dvi converter for the graphics card.since this terrible decision i've had a recurring issue with my sound not initializing when trying to play music, movies, or games. also, after the computer is on for some time, all audio crashes completely, and nothing can be done but a restart to get it working... kind of.
1) my system starts up and all system sounds work great! then i try to play music on windows media player... it loads a song continuously but never plays... so i turn it off and the window closes but the process remains open in task manager forcing me to end its process. to get sound to work again i have to go to Internet.com and play a video (which sometimes fails because of the same issue).2) wmp aside, another issue is games not starting up because of sound failure. for instance, counter-strike source will load, reach the splash screen of the main menu and will crash... the splash will remain visible with a loading sign on the bottom right corner. alt-tabbing doesn't work, hitting the windows button doesn't work... have to end-process . and again i have to go to Internet and run a video to get my sound working again.
3) third and most irritating and unique issue is with netflix and silverlight. when i try to stream a movie on netflix, silverlight loads all parameters until actually playing the movie, where it freezes because again the sound doesn't initialize. i've found an odd work-around to this issue however. that is to play a Internet video and then play a netflix stream movie, in which case it works fine and i can close Internet and continue watching the movie. this method also sometimes works with wmp and video games also.4) the core issue is this. after some time, my audio completely goes away. nothing brings it back; no Internet work-around or launching a game. when this happens, even windows sounds are completely dead. trying to raise or lower volume through volume control in the taskbar causes the volume control to freeze on screen, forcing me to end task the sndvol.exe process to get rid of it.
basically i think the problem lies in my video cards audio drivers interfering with windows audio drivers. now to remedy the situation i went to device manager and disabled all nvidia high definition audio drivers... this didn't help. i also resorted to uninstalling my sound card and removing the card itself from my system, which also did nothing. i am completely at my wits end. can't think of anything else to do, but postspecs:nvidia nforce 680i sli motherboardintel core 2 duo processor at 2.4ghz4ghz of corsair xms 2 ram ddr2 1088 mhz (i think)nvidia geforce gtx460 sc 1024mb750 watt powercreative labs x-fi fatality series gaming sound card (removed this)i now use the logitech g35 usb headset (good enough)running windows 7 ultimate
I have a Toshiba A300-18A laptop, bought in Portugal in 2008. It came pre-installed with Vista and I always left it in place because I couldn't find a proper time to backup everything properly. These holidays, I finally had the time to do that and 2 or 3 weeks ago I installed Win7. I didn't do an upgrade and did the custom install over the previous Vista version. Right after installation, during the first uses, my keyboard froze during an internet session. Simply, no key would work, but I had full control of the computer otherwise. Over the next days I found it happened quite frequently, and it didn't even need to be on internet. The most often place to freeze is in text editors (ConText, TexnicCenter), Excel (I'm using Office 2007), an online MMO and even the login screen, before I can actually access my computer. A restart usually solves the problem temporarily, sometimes I need two restarts in a row.Due to this, I did a reinstall of Win7, this time formatting the C: partition where I was making the installation. So this was a real clean install and I still had the same problems. I thought it would be drivers, so I installed some drivers I downloaded from Toshiba support center and THEN I found out about Toshiba's Win7 installation.Still the same problems. There are more curious things about the keyboard: it usually seems to think ctrl is pressed. I have opened the on-screen keyboard and noticed the ctrl-key depressed. Unpressing this key, thought, does not rehabilitate the keyboard. This ctrl-press must not always be on, thought, because sometimes I notice parallel behaviours and other times I don't. For example, I don't get 'save file' dialogs if I press 'S', but I do see the screen zooming in and out in a web browser if I roll my mouse-wheel. Also, I have some defects in Office (namely Excel) that I think may be related, and this since my first install: sometimes I'm going to Open Excel or Word and it says I have the ctrl key pressed and asks if I want to go through. More commonly I don't get this warning, but inside Excel, the usual shortcuts ctrl-c ctrl-v, ctrl-o (new book, portuguese version) offer me the insert/delete rows dialog. Sometimes ctrl-ins has this behaviour too, other times it works fine while ctrl-c does not. It's all very random.Finally, to complete the problems described in the subject. I've also noticed a behavious I NEVER had before installing Win7. Most often while playing the MMO (but not exclusively there) my screen goes white with some activity going up and down (sort of a mis-tuned TV from the analogical days) and I can only bring it to place changing windows to get my normal desktop. The MMO runs in dedicated full-screen mode and I guess it must be changing resolution. Also frequently (about 40% of the times), when I boot my computer it shows up the wrong resolution (1024x768) and, in the login screen, the little button on the bottom-right that allows one to shut down and restart shows up only these two options when ordinarily it shows 4 to 6 options. During normal use, I often get the video-going-white problem when I tilt the laptop display up and down.In 3 years I never had one single of the symptoms with Vista, now I get them everyday. Problem is that I quite enjoyed Win7 (and I don't like Vista) so I'd like to keep this OS if possible.
View 12 Replies View RelatedI am connected to a wireless WEP network using a TrendNet wireless adapter running Win 7. The Internet will stop working for some unknown reason only on my PC that uses this wireless adapter, but just web browsing stops working. Skype and Torrent still works. On my MacBook the Internet will still work during these periods.
View 3 Replies View RelatedMy logitech wireless mouse will stop working on certain pages maybe the second or third page of ebay for example. If "refreshed " it will work for 1-2 seconds and then stops "refresh " again and it will work for 1-2 seconds again. On certain sites it has no problem.
View 3 Replies View RelatedI have this weird bug when using the desktop background slideshow, after some time (I've no idea how long) it just stops on one of them and sticks with it as if I specified that background was the one I wanted instead of the slideshow. The only way I've managed to stop it happening is if I keep the Personalization window open after clicking Save Changes.
View 8 Replies View RelatedI have a recurring issue that drives me nuts to no end: Everytime I put my computer to sleep (I'm 99.5% sure this is the cause), Aero preview crashes, and prevents me from switching to an application with more than one window open (that is, using the taskbar). I have to kill and relaunch explorer to bring it back, but as I shut my laptop lid often, this is hardly ideal.
View 4 Replies View RelatedThis error recently started occurring where the mouse will not allow me to close out of windows, or click inside of them. Generally this starts occurring when I start playing World of Warcraft but it's not limited to this only. It's happened when I wasn't playing, or when I am just chatting on Skype, or even not at the computer. It's not a virus, or anything malicious, as I'm pretty competent with that sort of thing, but I cannot figure this issue out.I've also checked the sleep and power options, both are fine.It just stops working for 5-60 seconds and I have to ctrl+alt+delete to fix the issue momentarily. My computer is a Windows7 X64-bit OS, Asus Notebook G60 Series. The mouse is a Razer DeathAdder 3500DPI.
EDIT: The touch pad also will not work during this "phase" of unresponsiveness from the mouse. When I say it will not work, I mean that it will not click as well, but it will move responsively, as the mouse will.
I used outlook 2007 for years on XP with same account settings and no issues. I got a new pc with windows 7 and now it is constantly stops working. I have 8 IMAP accounts, and it is always a different one that causes it. For instance, 1 day i can look at 7 account, but as soon as i look at an 8th outlook stops working. The only way to fix it is remove the account and reconfigure it all over again. then a day or two later a different account will start doing the same thing. So basically, i am having to re configure my accounts every couple of days.
Log Name: Application
Source: Application Error
Date: 12/27/2011 12:48:17 PM
Event ID: 1000
Task Category: (100)
[code]....
My Homegroup stops working after a couple of hours i have to reset my modem for it to work. After it stops working and in my network for example one of my laptops doesn't show that its there and I don't know whats wrong I tryed going to HomegroupTroubleshoot problems but it still doesn't fix it.
View 2 Replies View Related