I am new here so apologies for being a newbie. I have a mid ranged gaming tower from ncix. That's about 7 months old. Its a 64bit windows 7 with 12gbs ram and 1tb hard drive.I was playing Starcraft with friends earlier today when suddenly the computer restarted during the match and was unable to boot up again after the sudden restart.It hangs at a black screen with the blinking underscore.
View 2 RepliesI thought I'd move with the times and picked up a copy of Windows 7 Ultimate. I had Vista installed before.
Booted from CD, delete/recreate partition and did a clean install.
The installer hangs on a black screen after the first reboot. Even left it overnight without progress. Forcing a reboot and going into Safe Mode the setup tries to continue, then comes up with a prompt saying 'Setup cannot run in Safe mode, rebooting your computer', whereupon it hangs again.
This is the sequence I tried:
1. Boot from CD, delete boot partition, new partition, clean install (HUNG)
2. Disconnect router, then as 1. (HANG)
3. Reset BIOS to factory defaults, then as 1. (HANG)
4. Disconnect external hard drive and printer, then as 1. (HANG)
5. Disabled on-board chips like sound, legacy USB etc, then as 1. (HANG)
I've tried booting to the CD and doing a 'repair windows' but that comes back without problems.
The only other thing I could think of is that the graphics card is incompatible... but I don't have onboard VGA and I don't have another card just lying around.
I've never had a problem doing a clean Windows install. I'm really disappointed they're making it so difficult. Does anyone have any suggestions? I might have to just go back to Vista...
Using a booting USB and selecting clean install, the install completes mostly, it reboots a few times like normal. When it should be time to enter the key, the screen is completely black *except* for the Windows 7 watermark.
Are there any known issues with this board and the on-board graphics chip?
Can anybody recommend a HDMI card to drive my Plasma Display that has good 7 support?
I have an ssd and my windows usually boots really fast, like around 15 seconds. Recently though, I've encountered a problem where after the glowing windows icon and before the login screen I get a black screen for about 1-2 minutes. I have no idea what might be causing this and I want to fully experience my SSD's capabilities. I miss being able to reboot in a matter of seconds instead of minutes. My SSD is doing great, it doesn't seem to be failing at all, still super fast after the boot. I've tried googling it but its kind of a catch all and most things I find are windows hanging indefinitely during boot.
View 7 Replies View RelatedI recently got a PC that my office was getting rid of. The PC was in great shape and I was told it worked fine when they gave it to me. They ripped out the hard drive and gave me the machine. As soon as I got it, I put a brand new 2Tb Seagate HDD in. I also replaced the existing RAM (2x1Gb sticks) with 2x 2Gb sticks with the memory speed to match my motherboard. Finally I swapped out the ATI Radeon HD2900XT with a Nvidia Geforce GTX 460. There was a sound card (PCI) I removed as well as a redundant firewire port I unhooked from the Mobo. I then booted and peformed a fresh install of Windows 7 32bit Pro. Everything seemed to be going fine... until I tried to shut down. Windows would freeze on the Shutting Down screen. I mean freeze because the spinning circle would stop and the entire machine was unresponsive.
I read online that pre-Service Pack 1 Windows 7 didn't like multi-core processers and would have issues shutting down, so I updated to SP1 (along with a bunch of other updates). Now when I try to shut down, the Shutting Down screen disappears and the signal to the monitor ends, however the machine stays on. I can hear the fans running and see the lights to the PCI cards still on. Once again I have no option but to hold the power button until it shuts down. One extra note I double checked every driver and they are all up to day. Also when I boot in Safe Mode the PC shuts down fine and I have no problem restarting, just shutting down...
I have been trying multiple times to install Windows 7 to my hp pavilion g6-1007 laptop from an installation DVD but with no success so far. The problem is that I can't proceed with the installation. Every time I put the DVD and boot from there, first I see that black screen with the bar at the bottom saying "loading files".And after it finishes, it gets to a black screen (with only a cursor present) and then it does nothing more than that. It hangs there, no matter how much time I wait. The DVD-ROM also throttles down and the HDD activity LED stops blinking at all.I thought about a crappy image, so I downloaded the repair disk iso and burned a CD with it, but then I got exactly the same behavior. I'm thinking now of perhaps trying to install from a USB stick, as a last resort.
View 4 Replies View Relatedi just did fresh installation of windows 7 on my mother in laws computer and for some reason when the computer is turned on or needs to restart the computer hangs where it is supposed to be reading from cd drive, i see all lights working but it will not load to windows. if i press f8 to enter boot menu and select the hard drive it starts with out a problem.
View 3 Replies View RelatedI'm using I have a DELL4500S desktop, on startup it will not go to the login screen, the screen is just black with the cursor showing. I've tried restarting the computer, unplugging everything and restarting it. Nothing is working. When it first starts a pop up shows and says "This Application has failed to start because SAMLIB.dll was not found. Re-installing the application may fix the problem."I'm not sure what it's talking about and what to re install and I can't reinstall whatever it is because I can't get to the start menu.
View 3 Replies View RelatedI recently was away for about a month and I did not use my desktop for that period of time. I tried turning it on yesterday and it would show the BIOS screen and then a black screen. It doesn't display anything else.I tried searching this problem and have tried various suggestions. I tried removing individual sticks of memory to see if it would fix anything. The motherboard keeps displaying FF, but one time it displayed 7F. I'm not sure if there is a problem with my video card or hard drive. I unplugged my video card and completely removed it and brushed dust off and plugged it back in, but that didn't fix it. Sometimes it flashes some text right after the BIOS screen, but it still just goes to black afterwards. What I think is my HDD light blinks sometimes and sometimes it doesn't light up at all. Could my hard drive have died?
View 7 Replies View RelatedI've recently encountered a problem with my 2 year old computer. Sometimes (not always) after turning the computer on and getting the Welcome screen the screen remains black (apart from the cursor). Eventually it may continue loading to the desktop however sometimes it doesn't. It's getting annoying because if it doesn't I have to cold reboot it. The only 'recent' upgrade to my computer was about 2 months ago when I installed a AMD Radeon 7850 OC to replace my overheating ATI Radeon 5770.
View 14 Replies View Relatedi am getting black screen after startup. but system was running in safemode.so i decided to install windows 7 again.i had inserted cd and pressed any key.i got a windows 7 startup but after that it was again coming black screen.
View 1 Replies View RelatedToday I was playing a match of Counter Strike: Source on my Windows 7 32-bit pc. During the game my computer had frozen and I was required to reboot my pc, after the reboot had completed and the windows 7 loading screen finished what I was left to see was a black screen... stunned I restarted my pc again and again this black screen. The computer keeps giving me the option to "recover" the start up files but when I click on this option it says windows is loading the files but when that completes it just goes to the windows loading screen then black again.
I have tried putting my windows 7 disk into my drive and using it to restore my pc but it does the exact same thing, loads up and goes straight to the windows loading screen then to the back screen.... I have been trying for hours now to get this to work! What I have: Windows 7 32-bit install disk, Windows 7 32-bit system repair disk, Laptop with windows 7 32-bit and windows 7 32-bit installed and running. Anything you can say to help will be appreacheated.
P.S Sometimes there is a 2x2 pixel green box in the top left hand corner...
P.P.S If there is a solution that requires all files deleted then that option is fine by me.
Its midnight and I'm kinda tired, but after removing all usb devices startup repair has appeared and is trying to fix my errors.
I have encountered a problem that is starting to annoy me. The other day my laptop froze and I restarted. After the flash windows screen it goes black and I can see nothing, doesn't get to the users screen. I have had windows 7 on for 2 months and all has been perfect.
I have tried to install the Nvidia drivers again (re downloaded drivers 179.48 and 186.82 with mod .inf). Both said installed correctly but after the restart still got black screen. Currently I am in safe mode on video controller as the display card. I uninstalled the old drivers as well.
the 179.48 were on previously and I have had no problems until the other day. I am stuck for any other solutions on what to do. I have a dell m1710 with a 7950 gtx. Win 7 build is 7201 64bit. All help would be greatly appreciated as I am at a wits end...
after i have typed in the password i get a black screen in windows7 service pack 1.
View 4 Replies View RelatedBlackscreen - computer whirring, lights on
View 2 Replies View RelatedWhen I start my computer, the windows logo animation happens, and then it goes to a black screen with a cursor in the middle. I have done startup repair a few times, and the first time it did something, but now when I try it says there there are no problems. I cannot start it in safe mode either. One major problem is that there are files that I really need for a school project on this computer. So, is there anything I can do to recover the files and fix my computer?
View 3 Replies View RelatedWhen I start my computer, the windows logo animation happens, and then it goes to a black screen with a cursor in the middle. I have done startup repair a few times, and the first time it did something, but now when I try it says there there are no problems. I cannot start it in safe mode either. Also I was able to recover some files on the hard drive using a Ubuntu Live CD. I have an ASUS A53S laptop running Windows 7 Premium.
View 4 Replies View RelatedWindows 7 desktop can not load after welcome screen appears just a black screen come and stuck a white mouse pointer works but nothing else.safe mode works and last known good configuration works whenever i start in above mentioned mode it works and then i had repaired win. 7 startup and chkdsk perform on c drive. then restart the system and it start properly as it worked. But after a day i start same problem came again.
View 9 Replies View RelatedI had the pceu virus and have managed to get rid of that completely and now everything works fine except when I startup windows, after I logon there would just be a black screen and nothing else. I can get everything to work by pressing ctrl + alt + del and start task manager. Also, pressing the windows button does not open the start menu. Any ideas on how to solve this
View 9 Replies View RelatedI keep getting a black screen after the Welcome screen for about 10-15 seconds and then the desktop appears. And sometimes it happens for a long time so I have to restart the PC. I haven't tried to fix it because I have no idea what to do.
View 4 Replies View RelatedWhenever I start up my laptop now, it immediately goes to black screen with a blinking "_".I've been able to boot into the Vaio diagnostic by holding F10 on start up.I've ran the hardware diagnostic and found no errors on the cpu or hard drive.I then reformatted and restored the factory settings through the diagnostic. The laptop still boots up to the black screen. [code]
View -1 Replies View RelatedI have a Sony Vaio laptop with an upgrade to windows 7 from vista. Yesterday my computer was really slow so I reset it to try and speed it up. I got passed the Vaio screen but then came the black screen with the blinking dash on the top right corner. The only thing I can enter is BIOS with F2 nothing else works. I can't enter safe mode or anything else. I've tried a few things, but nothing works.
1. Reseting default values in BIOS
2. Removing everything but internal Hard Drive in boot menu.
I have a windows & start up disc
3. Ran Startup Repair: Says couldn't detect a problem if recently attached device then remove it. ( Nothings Connected)
4. System restore ( was successfull but still no go)
5. Ran chkdsk & chkdsk/r from command prompt option
I also contacted Sony Support and with the 15 minutes alotted
6. Reseated memory
I just want to be able to get into the computer one more time so I can transfer my music and some other important files to my External Hard Drive.
I'm thinking right now it's an SSD corruption as nothing else makes sense. I haven't done any installing, downloading, or updating in about a week and after restarting today I got startup repair loading and telling me I had a corrupt registry.
It claimed to fix the problem and now when I boot up I get a black screen with cursor. Most threads tell you to hit ctrl-alt-del to launch task manager but ctrl-alt-del gives me nothing. After about 60s of this cursor my computer will auto-restart itself and repeat this process.
I've done about 3 system restores - all claim to be successful but do not fix the problem. I've also run chkdsk /f from startup repair command prompt which found problems and again, claimed to fix them but did not fix this boot problem.
This leads me to believe it's a corrupt SSD but I'd prefer to exercise all of my options before starting an RMA.
I installed windows 7 a few days ago, everything seemed to run fine until this morning. Last night i updated windows because some updates where finished, during shutdown the update was installed. This morning i turn on my computer, it beeps once(loud beep not a soft beep) The screen doesnt flicker and goes into sleep mode.
I tried disconnecting the videocard and reconnecting the wires, still doesnt work. I pressed F2, F8, F12, doesnt go to BIOS screen or Boot. I have no idea how to get the connection back. Has anyone has this problem and can help me find a solution.
i have recently ordered a lappy ASUS K53SV-SX520D from flipkart. the specifications are i5 second Generation processor. it came preinstalled DOS. i tried to install the windows 7 ultimate 32 bit. and i installed successfully. But some problem arose i guess the reason is that i created 3 partitions while installations and from Disk Management i created another volume. of the remaining unallocated space.now when i started the lappy m not able to BOOT. its just the blank screen with a blinking curser. i have tried many times but failed. peoplesolve this problem. its a new laptop and m no even able to start it even once.secondly. someone suggested me to delete the partitions while instaling the Win 7 again. i tried that too.. but all the options to delete, format, new, are in gray. i mean m not able to delete those 4 partitions.
View 1 Replies View RelatedI was installing a new theme earlier tonight on my desktop. I got an error code when I installed the shell32.dll file but for some reason I chose to ignore it because most errors don't seem to do anything. When I restart my computer and I try to log in, the screen is black and I get an error code. I have fixed a problem similar to this when my explorer.exe file got corrupted. I went to Ctrl+Alt+Del then>Open task manager> and from there I could open chrome and download a new them installer etc but now I can't even open the task manager file because I get another error code. How on earth am I supposed to fix this shell32.dll file and get to my task manager without re-installing windows?
View 3 Replies View RelatedUpon start up, hit F12 to run diagnostic...goes through a few check lists, then screen goes black with cursor in upper left.
Hard drive, motherboard, etc. all inclusive in monitor.
1 year back I upgraded vista to windows 7 Home premium.3 days back I had problem - my starting windows page was hanged and was not proceeding forward, also All types of safe mode was getting stuck on classpnp.sys.After reading many forums I booted with USB (mounted with windows 7) and used command prompt and deleted all "pcmcia" realted files from C drive. Now using F8 function I can't use any option (all option safe mode, low resolution, startup repair,etc won't work, even changes in Bios setting won't work). Also now while booting my PC with USB, after starting windows page, black screen appears with white arrow and it won't go further this black screen so now I can't even use command prompt & Installation option
View 9 Replies View RelatedWhenever I boot Windows 7, after it starts, instead of showing the login screen, it show a black screen with a movable cursor. Now, I can go into safe mode, and it works, but, hell, I can even put my password on that black screen, press enter and it will go into Windows and work just fine. But the thing is, it's supposed to show the login screen, not just a black one, so I'm a bit worried of what might be causing the problem, and whether or not it could expand into something worse.
View 2 Replies View RelatedSometimes when I turn on my computer, the screen will turn on as usual, and there is like a cursor that blinks in the top left corner of the screen, again, as usual. However, it will sometimes stop, and stay on this screen for upwards of a minute or more. The laptop sounds like it's still working, as the fan is going pretty fast and everything sounds like it's spinning, however it doesn't show anything on the screen. After around the minute duration, the screen will go black and the normal boot up process is proceeded with. From what I've read of other people, they can't even get past this screen, which is why I think my problem is slightly different, or the same, just not as severe. Does my problem also sound like it's the MBR, as indicated by other people's questions on the Internet?
If so, is there any easy way to repair it without having to use a windows 7 disc, as I have a laptop and didn't get a disc with it...
Firstly I'm on Windows 7 64. Over the last few weeks I've noticed that after starting up my laptop, and logging in just fine, the screen would go black for a couple of seconds-- my cursor would appear and I could move it around, but the screen would be black. After 10 seconds or so, the Windows 7 GUI would load just fine and there I would be.
I restarted my PC at 5AM this morning and it did the same. All I did at that point was send an e-mail via Gmail and shut it down again. At 2PM I went to startup my PC and everything went as usual except the PC never left that black screen with the responsive cursor.
I searched here and found that problem many times, but with one difference-- my PC starts fine in Safe Mode.
I used Advanced System Care to fix some registry errors and am currently running a Malwarebytes full scan.
It might be worth noting that I recently installed Batman: Arkham Asylum and as it was frequently crashing, followed some advice to enable everything at startup, which I did, fixing my game problem. That was around the time the black screen first started showing up, and I assumed it was a result of more things taking place during Windows startup.