Black Screen On Startup After Installing A Theme?
Mar 2, 2012
I was installing a new theme earlier tonight on my desktop. I got an error code when I installed the shell32.dll file but for some reason I chose to ignore it because most errors don't seem to do anything. When I restart my computer and I try to log in, the screen is black and I get an error code. I have fixed a problem similar to this when my explorer.exe file got corrupted. I went to Ctrl+Alt+Del then>Open task manager> and from there I could open chrome and download a new them installer etc but now I can't even open the task manager file because I get another error code. How on earth am I supposed to fix this shell32.dll file and get to my task manager without re-installing windows?
View 3 Replies
ADVERTISEMENT
Dec 27, 2011
I messed up my computer really badly.I used a theme installer (from the 'Windows Club' website) to install the glass onion theme for windows 7.After I restarted my computer and logged in. my desktop is Black (nothing is on the screen). I have tried everything to fix this:I have tried sfc /scannow....but I get this error: "sfc scannow windows resource protection could not perform the requested operation"I checked my disk for errorsI don't know what to do now, because I did not create a restore point (because I didn't know how to do it...I do now)
View 6 Replies
View Related
Dec 23, 2012
I had this problem when I was just neutrally browsing through the internet when my screen just immediately flickered black, not for very long only about 1 second at the most, and my theme changed. I didn't really know what happened, so just kept browsing. I was browsing for about 20 more minutes and the same thing happened again, but this time it changed back. Recently just installed a new video card in my system, and have all the updated drivers, however, I wen't to CPUID to check the temps. of my system and my video card was pulling some numbers I haven't seen it do at this kind of browsing. My graphics card was about 67C and during regular web browsing it is usually around 30-35C. Is this a problem with Windows? Or is it a problem with my Graphics Card?
View 2 Replies
View Related
May 6, 2011
how can i change my windows 7 blue theme to the previous black and grey theme which it had when i purchased my laptop... and cab i apply any other theme on windows 7 basic?
View 1 Replies
View Related
Dec 5, 2011
I'm using I have a DELL4500S desktop, on startup it will not go to the login screen, the screen is just black with the cursor showing. I've tried restarting the computer, unplugging everything and restarting it. Nothing is working. When it first starts a pop up shows and says "This Application has failed to start because SAMLIB.dll was not found. Re-installing the application may fix the problem."I'm not sure what it's talking about and what to re install and I can't reinstall whatever it is because I can't get to the start menu.
View 3 Replies
View Related
Jul 29, 2012
I recently was away for about a month and I did not use my desktop for that period of time. I tried turning it on yesterday and it would show the BIOS screen and then a black screen. It doesn't display anything else.I tried searching this problem and have tried various suggestions. I tried removing individual sticks of memory to see if it would fix anything. The motherboard keeps displaying FF, but one time it displayed 7F. I'm not sure if there is a problem with my video card or hard drive. I unplugged my video card and completely removed it and brushed dust off and plugged it back in, but that didn't fix it. Sometimes it flashes some text right after the BIOS screen, but it still just goes to black afterwards. What I think is my HDD light blinks sometimes and sometimes it doesn't light up at all. Could my hard drive have died?
View 7 Replies
View Related
Oct 22, 2012
I've recently encountered a problem with my 2 year old computer. Sometimes (not always) after turning the computer on and getting the Welcome screen the screen remains black (apart from the cursor). Eventually it may continue loading to the desktop however sometimes it doesn't. It's getting annoying because if it doesn't I have to cold reboot it. The only 'recent' upgrade to my computer was about 2 months ago when I installed a AMD Radeon 7850 OC to replace my overheating ATI Radeon 5770.
View 14 Replies
View Related
Jun 8, 2012
i am getting black screen after startup. but system was running in safemode.so i decided to install windows 7 again.i had inserted cd and pressed any key.i got a windows 7 startup but after that it was again coming black screen.
View 1 Replies
View Related
Oct 27, 2009
Today I was playing a match of Counter Strike: Source on my Windows 7 32-bit pc. During the game my computer had frozen and I was required to reboot my pc, after the reboot had completed and the windows 7 loading screen finished what I was left to see was a black screen... stunned I restarted my pc again and again this black screen. The computer keeps giving me the option to "recover" the start up files but when I click on this option it says windows is loading the files but when that completes it just goes to the windows loading screen then black again.
I have tried putting my windows 7 disk into my drive and using it to restore my pc but it does the exact same thing, loads up and goes straight to the windows loading screen then to the back screen.... I have been trying for hours now to get this to work! What I have: Windows 7 32-bit install disk, Windows 7 32-bit system repair disk, Laptop with windows 7 32-bit and windows 7 32-bit installed and running. Anything you can say to help will be appreacheated.
P.S Sometimes there is a 2x2 pixel green box in the top left hand corner...
P.P.S If there is a solution that requires all files deleted then that option is fine by me.
Its midnight and I'm kinda tired, but after removing all usb devices startup repair has appeared and is trying to fix my errors.
View 8 Replies
View Related
Sep 10, 2009
I have encountered a problem that is starting to annoy me. The other day my laptop froze and I restarted. After the flash windows screen it goes black and I can see nothing, doesn't get to the users screen. I have had windows 7 on for 2 months and all has been perfect.
I have tried to install the Nvidia drivers again (re downloaded drivers 179.48 and 186.82 with mod .inf). Both said installed correctly but after the restart still got black screen. Currently I am in safe mode on video controller as the display card. I uninstalled the old drivers as well.
the 179.48 were on previously and I have had no problems until the other day. I am stuck for any other solutions on what to do. I have a dell m1710 with a 7950 gtx. Win 7 build is 7201 64bit. All help would be greatly appreciated as I am at a wits end...
View 9 Replies
View Related
Nov 5, 2011
after i have typed in the password i get a black screen in windows7 service pack 1.
View 4 Replies
View Related
Jun 29, 2012
Blackscreen - computer whirring, lights on
View 2 Replies
View Related
Oct 16, 2012
When I start my computer, the windows logo animation happens, and then it goes to a black screen with a cursor in the middle. I have done startup repair a few times, and the first time it did something, but now when I try it says there there are no problems. I cannot start it in safe mode either. One major problem is that there are files that I really need for a school project on this computer. So, is there anything I can do to recover the files and fix my computer?
View 3 Replies
View Related
Oct 16, 2012
When I start my computer, the windows logo animation happens, and then it goes to a black screen with a cursor in the middle. I have done startup repair a few times, and the first time it did something, but now when I try it says there there are no problems. I cannot start it in safe mode either. Also I was able to recover some files on the hard drive using a Ubuntu Live CD. I have an ASUS A53S laptop running Windows 7 Premium.
View 4 Replies
View Related
Oct 31, 2012
Windows 7 desktop can not load after welcome screen appears just a black screen come and stuck a white mouse pointer works but nothing else.safe mode works and last known good configuration works whenever i start in above mentioned mode it works and then i had repaired win. 7 startup and chkdsk perform on c drive. then restart the system and it start properly as it worked. But after a day i start same problem came again.
View 9 Replies
View Related
Jan 11, 2013
I had the pceu virus and have managed to get rid of that completely and now everything works fine except when I startup windows, after I logon there would just be a black screen and nothing else. I can get everything to work by pressing ctrl + alt + del and start task manager. Also, pressing the windows button does not open the start menu. Any ideas on how to solve this
View 9 Replies
View Related
Nov 4, 2012
I keep getting a black screen after the Welcome screen for about 10-15 seconds and then the desktop appears. And sometimes it happens for a long time so I have to restart the PC. I haven't tried to fix it because I have no idea what to do.
View 4 Replies
View Related
Jul 4, 2011
I am new here so apologies for being a newbie. I have a mid ranged gaming tower from ncix. That's about 7 months old. Its a 64bit windows 7 with 12gbs ram and 1tb hard drive.I was playing Starcraft with friends earlier today when suddenly the computer restarted during the match and was unable to boot up again after the sudden restart.It hangs at a black screen with the blinking underscore.
View 2 Replies
View Related
Jul 18, 2011
Whenever I start up my laptop now, it immediately goes to black screen with a blinking "_".I've been able to boot into the Vaio diagnostic by holding F10 on start up.I've ran the hardware diagnostic and found no errors on the cpu or hard drive.I then reformatted and restored the factory settings through the diagnostic. The laptop still boots up to the black screen. [code]
View -1 Replies
View Related
Jan 25, 2011
I have a Sony Vaio laptop with an upgrade to windows 7 from vista. Yesterday my computer was really slow so I reset it to try and speed it up. I got passed the Vaio screen but then came the black screen with the blinking dash on the top right corner. The only thing I can enter is BIOS with F2 nothing else works. I can't enter safe mode or anything else. I've tried a few things, but nothing works.
1. Reseting default values in BIOS
2. Removing everything but internal Hard Drive in boot menu.
I have a windows & start up disc
3. Ran Startup Repair: Says couldn't detect a problem if recently attached device then remove it. ( Nothings Connected)
4. System restore ( was successfull but still no go)
5. Ran chkdsk & chkdsk/r from command prompt option
I also contacted Sony Support and with the 15 minutes alotted
6. Reseated memory
I just want to be able to get into the computer one more time so I can transfer my music and some other important files to my External Hard Drive.
View 8 Replies
View Related
Oct 8, 2012
I'm thinking right now it's an SSD corruption as nothing else makes sense. I haven't done any installing, downloading, or updating in about a week and after restarting today I got startup repair loading and telling me I had a corrupt registry.
It claimed to fix the problem and now when I boot up I get a black screen with cursor. Most threads tell you to hit ctrl-alt-del to launch task manager but ctrl-alt-del gives me nothing. After about 60s of this cursor my computer will auto-restart itself and repeat this process.
I've done about 3 system restores - all claim to be successful but do not fix the problem. I've also run chkdsk /f from startup repair command prompt which found problems and again, claimed to fix them but did not fix this boot problem.
This leads me to believe it's a corrupt SSD but I'd prefer to exercise all of my options before starting an RMA.
View 3 Replies
View Related
Jul 21, 2009
I installed windows 7 a few days ago, everything seemed to run fine until this morning. Last night i updated windows because some updates where finished, during shutdown the update was installed. This morning i turn on my computer, it beeps once(loud beep not a soft beep) The screen doesnt flicker and goes into sleep mode.
I tried disconnecting the videocard and reconnecting the wires, still doesnt work. I pressed F2, F8, F12, doesnt go to BIOS screen or Boot. I have no idea how to get the connection back. Has anyone has this problem and can help me find a solution.
View 2 Replies
View Related
Jan 23, 2012
i have recently ordered a lappy ASUS K53SV-SX520D from flipkart. the specifications are i5 second Generation processor. it came preinstalled DOS. i tried to install the windows 7 ultimate 32 bit. and i installed successfully. But some problem arose i guess the reason is that i created 3 partitions while installations and from Disk Management i created another volume. of the remaining unallocated space.now when i started the lappy m not able to BOOT. its just the blank screen with a blinking curser. i have tried many times but failed. peoplesolve this problem. its a new laptop and m no even able to start it even once.secondly. someone suggested me to delete the partitions while instaling the Win 7 again. i tried that too.. but all the options to delete, format, new, are in gray. i mean m not able to delete those 4 partitions.
View 1 Replies
View Related
Oct 13, 2009
I tried to install WINDOWS 7 build 7600 64 bit on system:
so installation was fine. but just after install was completed
after the symbol of Windows 7, there was just Black Screen,
nothing else.
it's somthing with configuration of my bios because its 64-bit version?
maybe its somthing with my graphic card?.
View 9 Replies
View Related
Dec 15, 2009
i have installed the windows supposedly and it restarts my computer during process then starts up saying starting windows then after that goes to a black screen and never recovers from it can any one help.
View 1 Replies
View Related
Aug 28, 2011
Upon start up, hit F12 to run diagnostic...goes through a few check lists, then screen goes black with cursor in upper left.
Hard drive, motherboard, etc. all inclusive in monitor.
View 3 Replies
View Related
Dec 20, 2011
1 year back I upgraded vista to windows 7 Home premium.3 days back I had problem - my starting windows page was hanged and was not proceeding forward, also All types of safe mode was getting stuck on classpnp.sys.After reading many forums I booted with USB (mounted with windows 7) and used command prompt and deleted all "pcmcia" realted files from C drive. Now using F8 function I can't use any option (all option safe mode, low resolution, startup repair,etc won't work, even changes in Bios setting won't work). Also now while booting my PC with USB, after starting windows page, black screen appears with white arrow and it won't go further this black screen so now I can't even use command prompt & Installation option
View 9 Replies
View Related
Feb 25, 2012
Whenever I boot Windows 7, after it starts, instead of showing the login screen, it show a black screen with a movable cursor. Now, I can go into safe mode, and it works, but, hell, I can even put my password on that black screen, press enter and it will go into Windows and work just fine. But the thing is, it's supposed to show the login screen, not just a black one, so I'm a bit worried of what might be causing the problem, and whether or not it could expand into something worse.
View 2 Replies
View Related
Feb 20, 2011
recently I installed a new motherboard and since it did not support RAID I had to install the OS onto one of the HD's. After creating a username and password the computer restarted again and after posting went straight to a black screen with a blinking white underscore in the top left. I tried booting from the CD again but when it says "press any key to boot from cd" nothing happens when i push any key on my keyboard. Any suggestions?
View 8 Replies
View Related
Nov 11, 2010
I've installed windows 7 ulitimate 32bit and everything is went fine during installation.After last restart screen goes black and i cant do anything. I cant boot up into bios at all...The only thing that i get is the black screen and flickering bios cursor and only command that responding is ctrl+alt+del
View 9 Replies
View Related
Jun 25, 2011
So I just got my Crucial M4 64g SSD that I was planning on using as my boot drive with windows 7 on it and nothing else but I have ran into issues along the way. When I boot off the windows cd once the loading finishes and the blue screen comes on asking language and such it blacks out. Everything is still running but the screen goes black. Im booting of my HDD right now to still use my computer. I used the 6g Sata cable and plugged it into the 6g sata slot on the mobo I formatted the SSD and tried again but nothing worked. The first time around it wasn't working so I tried installing windows in safe mode but it was going extremely slow so I canceled. The screen then froze so I restarted. Im not sure if i messed anything up by doing this. I tried only having the SSD plugged in as well when I install but the same thing happens.
My other hardware:
Asus Sabbertooth P67
EVGA 560 ti superclocked ds
Intel 2500k
Creative sound blaster audigy
Rosewill Blackhawk case
Zalman 9900nt
View 8 Replies
View Related