I've installed windows 7 ulitimate 32bit and everything is went fine during installation.After last restart screen goes black and i cant do anything. I cant boot up into bios at all...The only thing that i get is the black screen and flickering bios cursor and only command that responding is ctrl+alt+del
View 9 Replies
So I just got my Crucial M4 64g SSD that I was planning on using as my boot drive with windows 7 on it and nothing else but I have ran into issues along the way. When I boot off the windows cd once the loading finishes and the blue screen comes on asking language and such it blacks out. Everything is still running but the screen goes black. Im booting of my HDD right now to still use my computer. I used the 6g Sata cable and plugged it into the 6g sata slot on the mobo I formatted the SSD and tried again but nothing worked. The first time around it wasn't working so I tried installing windows in safe mode but it was going extremely slow so I canceled. The screen then froze so I restarted. Im not sure if i messed anything up by doing this. I tried only having the SSD plugged in as well when I install but the same thing happens.
My other hardware:
Asus Sabbertooth P67
EVGA 560 ti superclocked ds
Intel 2500k
Creative sound blaster audigy
Rosewill Blackhawk case
Zalman 9900nt
I've just installed windows 7 from dvd over windows XP. Installation went fine and really quick but on the last restart and first starting up of windows 7 screen become black and i cant do anything. The only thing that i see on the screen is flickering bios cursor and only command that respond is ctrl+alt+del. I cant get into my bios at all.
View 1 Replies View RelatedBuilding new pc and I am getting random blackscreens. Some times before windows7 starts sometimes hours after windows has beeen running. My mobo is ta760gm2 with athlonx2 4850, corsair tx750, ocz fatality 2x2gb, velociraptor 74gb hd and wd caviar black 1tb hd. CPU never gets over 46c I have tryied reinstalling the os several times and got many updates completed.
View 2 Replies View RelatedI have been trying multiple times to install Windows 7 to my hp pavilion g6-1007 laptop from an installation DVD but with no success so far. The problem is that I can't proceed with the installation. Every time I put the DVD and boot from there, first I see that black screen with the bar at the bottom saying "loading files".And after it finishes, it gets to a black screen (with only a cursor present) and then it does nothing more than that. It hangs there, no matter how much time I wait. The DVD-ROM also throttles down and the HDD activity LED stops blinking at all.I thought about a crappy image, so I downloaded the repair disk iso and burned a CD with it, but then I got exactly the same behavior. I'm thinking now of perhaps trying to install from a USB stick, as a last resort.
View 4 Replies View RelatedI tried to install WINDOWS 7 build 7600 64 bit on system:
so installation was fine. but just after install was completed
after the symbol of Windows 7, there was just Black Screen,
nothing else.
it's somthing with configuration of my bios because its 64-bit version?
maybe its somthing with my graphic card?.
i have installed the windows supposedly and it restarts my computer during process then starts up saying starting windows then after that goes to a black screen and never recovers from it can any one help.
View 1 Replies View Relatedrecently I installed a new motherboard and since it did not support RAID I had to install the OS onto one of the HD's. After creating a username and password the computer restarted again and after posting went straight to a black screen with a blinking white underscore in the top left. I tried booting from the CD again but when it says "press any key to boot from cd" nothing happens when i push any key on my keyboard. Any suggestions?
View 8 Replies View RelatedI messed up my computer really badly.I used a theme installer (from the 'Windows Club' website) to install the glass onion theme for windows 7.After I restarted my computer and logged in. my desktop is Black (nothing is on the screen). I have tried everything to fix this:I have tried sfc /scannow....but I get this error: "sfc scannow windows resource protection could not perform the requested operation"I checked my disk for errorsI don't know what to do now, because I did not create a restore point (because I didn't know how to do it...I do now)
View 6 Replies View Relatedi decide to reinstall my computer from windows 7 32 home bit into windows 7 64 bit, everything works fine until i decide to install the lates intel vga driver, after restarting the computer, the screen keep showing grid lines like this pic. t
my pc spec:
Mobo :msi h67ma -e45
RAM : 2GB Ram
Procesor: intel core i5 2300
I was installing a new theme earlier tonight on my desktop. I got an error code when I installed the shell32.dll file but for some reason I chose to ignore it because most errors don't seem to do anything. When I restart my computer and I try to log in, the screen is black and I get an error code. I have fixed a problem similar to this when my explorer.exe file got corrupted. I went to Ctrl+Alt+Del then>Open task manager> and from there I could open chrome and download a new them installer etc but now I can't even open the task manager file because I get another error code. How on earth am I supposed to fix this shell32.dll file and get to my task manager without re-installing windows?
View 3 Replies View RelatedInstalling Windows 7. It just finished copying all the files to the harddrive and then it restarts to complete the installation (you know, the part where you type your namem computername and so on)
But after the restart, I can see it starting, Windows logo and all... But it looks like it's going to start but then, it's just a black screen. But I can see my mouse, and move around, on a completely black background.
Tried booting the computer it in safe made, but the installation program said it can't continue in safe mode and restartet. Aaaand I was back at the black screen. Tried doing the install again, and some problem.
My wife did something on her PC (she doesn't know exactly for sure what & can't explain it completely me), and now she can't boot up her PC. She says it had something to do with changing the security settings for a program she uses a lot so it wouldn't keep asking her if she wanted to launch it, and that's when it told her to restart the PC, then it wouldn't boot up anymore.When you reboot, the screen eventually goes to a black screen saying "Windows failed to start. A software or hardware error may be the cause" or something to that effect. It offers me the option to "Launch Startup Repair" or "Start Windows Normally".If I Launch Startup Repair, nothing much happens --- it says it's adding files, then it looks like Windows is about to boot up, then it goes to a black screen for a long time & nothing happens.
If I choose Start Windows Normally, it simply reboots & eventually brings me back to the same screen again.I've tried using rebooting and selecting ESC to get to the boot menu, then installing the Win 7 installation disc & selecting the DVD drive, then I select thelanguage, then I click Repair, but it sits there forever with nothing happening.I also tried an outside boot disc I found on the web & it doesn't launch.
My son has a Toshiba Satelite P205 that he just upgraded from Windows XP Home Premium to Windows 7 32-bit. After the upgrade completed the computer booted fine. The within 20 minutes he got the BSOD and the system rebooted. Now he can't get Windows to fully start. We've tried all of the options from F8 with no success. We have the Toshiba System Recovery Disk but it won't launch. (The Boot sequence has been changed to boot from CD/DVD and then the Hard Drive.)The Memory Diagnostic from the Windows 7 disk ran fine with no errors. I'm thinking I might need to re-format/wipe the drive to start fresh but don't know where to obtain a boot CD(no floppy drive on this laptop). Does anyone recommend a software that I can purchase to clear everything without destroying the CD/DVD accessibility so I can then use the System Recovery Disk to put it back to the original factory Settings?
View 1 Replies View RelatedI have an Acer aspire 5732Z. I turn my laptop on and it shows the starting windows screen then just goes to a black screen with a cursor. I tried to do systems restore but it said that I did not have a system restore point. I cannot start in any safe mode. I have all my pictures, uni work etc., and I am terrified I've lost it all. I've only had the laptop a year.
View 1 Replies View RelatedI have recently bought a computer and I have found that when I turn it on it runs normally until after the "Resuming Windows" screen, where everything turns off and the screen goes black. It had been running well for the last few days, so this came out of nowhere.I have searched this problem and I come up with a bunch of different solutions but no one agrees. The most common reason (apparently) is my version of Windows 7 Home Premium (x64) and I need to install something or other. But I can't even get to the desktop, and no one really explains it simply. [code]
View 3 Replies View RelatedRecently, my computer starts up windows and after the loading screen it just sits at a black screen forever with a cursor and it doesn't even make it to the log in screen. I have tried safe mode with the same results. What I've Done So FarTried to Repair Startup with Windows DVD Tried to use sfc /scannow at boot (Says pending changes and needs to restart) Tried logging into my Ubuntu partition and virus scanning (None found) Tried copying Reg Files from Regback into config while I was in Linux Tried to Repair Install (But I can't log into Windows ) Tried to bootrec /fixmbr /fixbot /RebuildBcd (Which destroyed my dual boot linux grub, but I was desperate. And still nothing) Interestingly though, after I do /RebuildBcd command it says something like "Found Windows Installations: 0" Tried to System Restore (Gave me an Error, wouldn't you know) At this point I'm not to confident that this can be fixed. If anyone has any ideas I'm willing to try. Or if you have any snazzy suggestions on how I could fix it using another computer, I have a different Windows Pro x64 computer that I can put the HD in if there's someway I can save my data/fix it/repair install from there. I just don't know how.
Edit: I finished the chkdsk and there were no bad sectors, though it did give me a message "Failed to transfer logged messages to the event log with status 50."I did a Windows Defender Offline scan with no viruses and I'm currently scanning with Kaspersky Rescue disk. I don't believe it is a virus, I think it's a corruptregistry at this point. I had just cleaned my registry with CCleaner before the shutdown that led to this >.<
i recently just installed a clean install of windows 7(instead of a upgrade from my vista.i got the free upgrade),now everything works fine expect when after the windows 7 splash occurs there is about a 10 second delay were the screen is just black with a cursor.
View 9 Replies View RelatedSystem was rock solid for 1 year till I downloaded Win7 SP1 a few weeks ago. Immediately, I started getting random freezes. Couldn't restore to previous state because the SP1 install erased the restore points!Uninstalled SP1. Updated all drivers: BIOS, Chipset, Video, USB, Audio, LAN, Mouse, etc. No Dice! Performed CHKDSK, sfc /scannow & DiskCleanup. Tried "Clean Boot" using MSCONFIG to disable all services.Disabled USB & LAN in BIOS. No Dice! Won't even run in Safe Mode... nor, complete an installation from the Win7 DVD w/o locking up or Black Screening[CODE]I read some people solved their problem by simply changing out the Power Supply. This one "seems" to be running fine... and, it *WAS* fine before the dreaded SP1 nuked my Win7 installation.What is going on, and how can I get the OS reinstalled???? and, get the bugs out of the XP side?
View 6 Replies View RelatedWhenever the Windows loadscreen passes the screen goes black and I can move a cursor around the screen. I have had this happen before and fixed it with bootrec.exe but I can't seem to get that to work this time. Safe mode has the exact same black screen problem.I have done chkdsk and sfc scannow - Didn't fix it.When I boot into Kaspersky Rescue from a USB drive it mentions that I need to shut down windows properly before continuing. I would like to do this but I can't.I have tried changing the active partition on information in some of these other threads - It didn't seem to work.All disks are healthy according to the DISKPART and Partition Wizard. I have done the HP hardware diagnostic scans and everything comes up fine.
View 1 Replies View Relatedadvent roma 3000 is not starting, when I turn it on, only black screen and the sound of movement, which comes on and off.
View 4 Replies View Relatedhis problem started with XP and I decided to upgrade to win 7 pro.
My PC has a black screen on wake up more times than not. Wake up is set for a login screen normally. My settings are screen saver after 10 mins then send screen to sleep in 20 mins, no hibernation mode, rest machine remains alive, runs 24/7 normally.
I have swapped the power supply and graphics card with ones that work in the same model PC and no joy.
i have a Dell Vostro 1520 and im running Windows 7 with a 32bit. It is only 2 years only. It started about a month ago. I was on my laptop viewing and deleting some unwanted photos i had. A few minutes later i realized that i deleted a photo that i wanted. So i went to the recycling bin and restored that photo. When i went back to my photos and went into the album, it said something like i do no have permission to access this folder. Please press continue to get full permission. I clicked continue and i got the access i should have. Now i tried many more random folders and the same thing happened. Also when i came out of the folders, the folders had a big pad lock sign on the front of it. After that i shut down the laptop and went to turn it back on. The laptop will power on like normal. I can press f12 for the boot options. which i have already tried many times. I also tried it in safe mode and what-not, but still nothing. I can hear the fan and stuff spinning up like normal. I have also put and CD into the CD ROM and that spins up fine. So after the Dell logo on the screen, it goes black and stays that way with the cursor. You can move the cursor around no problem. I should also add that the battery light is and has been flashing for a good wile. Its flashing orange and blue. I'm wondering if this has anything to do with the battery. Because my laptop will not charge with the AC adapter in it for many months now. It will only stay powered on with the AC adapter plugged in. One more thing. The LED lights over the buttons. None of the are flashing, besides one, on the far left. And i cant find out anywhere what this LED light stands for.
View 3 Replies View RelatedMy computer has a problem with crashing while playing a video in full screen. When it crashes the screen turns black while the speakers give out a buzzing noise. Everything is unresposive the only solution is to turn it off with the power button. It happens in any full screen video online or offline and even visualizations from windows media player and iTunes, but only in full screen. I don't think it's overheating either because sometimes it takes 30 mins to crash and other times it will crash immediately when put in full screen. *I've tried setting it back to factory settings thus reinstalling windows. *All the directx features are working with no reported problem there.* I don't think it's a memory issue in the computer, as my specs are:
Windows 7 64-bit
Processor: intel core i5 3.20 GHz
Ram: 8 GB
Graphics card: NVIDIA GeForce GT 220
Graphics card memory: 0.5 GB
Any other ideas?
I'm using I have a DELL4500S desktop, on startup it will not go to the login screen, the screen is just black with the cursor showing. I've tried restarting the computer, unplugging everything and restarting it. Nothing is working. When it first starts a pop up shows and says "This Application has failed to start because SAMLIB.dll was not found. Re-installing the application may fix the problem."I'm not sure what it's talking about and what to re install and I can't reinstall whatever it is because I can't get to the start menu.
View 3 Replies View RelatedI just upgraded to Windows 7 on my Toshiba Satellite Special Edition laptop that came with Vista 64bit and the other night i downloaded iTunes 10 and told me to restart my machine so I clicked ok and then my laptop shut off and when it came back on the Toshiba screen came up as usual but seemed to stay on longer than normal then it goes to a black screen with a underscore that blinks for a few moments then becomes solid. Ive tried to use the "F" keys to get different boot options because i have the windows 7 ISO disc and a ubuntu disc that I could use but whatever i try my laptop wont process it just does the same thing over and over again and bever proceeds to the actually boot up windows.
View 7 Replies View RelatedI have a Toshiba laptop running windows 7. It has been running like a well oiled machine since the day I got it.I turned it off to watch TV, then when I turned it back on, the screen shows the Toshiba screen for about 1/4th of a second and then goes black.If I hit F8, F10, or F12 nothing shows up.
View 2 Replies View RelatedWhile attempting to restore a previous backup of my system (with Norton Ghost 15), I got an error, and the system rebooted. Upon reboot, I get the black screen of death with just the cursor instead of the usual login screen. I have tried the following thus far: These all give me the black screen of death with movable cursor:boot in safe mode boot in safe mode with networking boot in safe mode with command prompt last known good configuration I did an initial system startup repair which went through and said it repaired it, rebooted, but no change. I did a pre-boot diagnostic test - nothing memory test - nothing tried restoring from restore point, but it says I don't have any (LIES! BLASPHEMY!) tried restoring from restore point on external disk - seemed okay, then failed. chkdsk - found some stuff, fixed it, no change. tried ctrl+alt+del on black screen of death - nothing
Now, I know that the hard drive itself is alright, that is, the information is still all there still. While I can't give you exact specs, I can tell you that I am on a Dell Studio XPS running Windows 7 home premium 64 bit. I'm at a loss as to what else to do. Despite being a black screen, with just a movable cursor, the system still appears to be running, as every few minutes, it will show the "thinking" cursor, where it shows the little circle next to the arrow.
i have an HP Pavillion dv7 with windows7. It is less then 3 months old. Problem- Yesterday the screen went black while i was watching a video, but the sound kept going. so i restarted the computer, and the screen works until you get to the login screen it goes black again. SO i called customer service at hp, and we worked on it for an hour.THe one thing that seems to work is when i go to the device manager, uninstall the display adapters, and restsart in normal mode, then i go and reinstall the ATI device thing in the recovery manager, but everytime after i reinstall the ATI display device thing, it ends up going black a little while later again. lol
View 3 Replies View RelatedRecently my Satellite M305-S39052 was upgraded from Vista to Windows 7 Pro. Everything works fine except for a couple of things; the machine will not restart and even though the buttons on the keyboard are lit, the screen goes black and will not finish the restart sequence. Besides that, after a Windows Update, the pointer will not move and then I have to shut down. After starting in safe mode and doing a System Restore, everything works except for the restart and the Windows Update.
View 7 Replies View RelatedToday i noticed that after my windows 7 logon screen i get a black screen with only my mouse pointer on it. i already tried restoring to a day before the problem but same thing happens. what can i do to fix it? seems to me that the problem started after i installed hotspot-shield i guess it cameout with some driver installer but i dont know which ones
View 9 Replies View Related
