i decide to reinstall my computer from windows 7 32 home bit into windows 7 64 bit, everything works fine until i decide to install the lates intel vga driver, after restarting the computer, the screen keep showing grid lines like this pic. t
my pc spec:
Mobo :msi h67ma -e45
RAM : 2GB Ram
Procesor: intel core i5 2300
I tried to install WINDOWS 7 build 7600 64 bit on system:
so installation was fine. but just after install was completed
after the symbol of Windows 7, there was just Black Screen,
nothing else.
it's somthing with configuration of my bios because its 64-bit version?
maybe its somthing with my graphic card?.
i have installed the windows supposedly and it restarts my computer during process then starts up saying starting windows then after that goes to a black screen and never recovers from it can any one help.
View 1 Replies View Relatedrecently I installed a new motherboard and since it did not support RAID I had to install the OS onto one of the HD's. After creating a username and password the computer restarted again and after posting went straight to a black screen with a blinking white underscore in the top left. I tried booting from the CD again but when it says "press any key to boot from cd" nothing happens when i push any key on my keyboard. Any suggestions?
View 8 Replies View RelatedI've installed windows 7 ulitimate 32bit and everything is went fine during installation.After last restart screen goes black and i cant do anything. I cant boot up into bios at all...The only thing that i get is the black screen and flickering bios cursor and only command that responding is ctrl+alt+del
View 9 Replies View RelatedSo I just got my Crucial M4 64g SSD that I was planning on using as my boot drive with windows 7 on it and nothing else but I have ran into issues along the way. When I boot off the windows cd once the loading finishes and the blue screen comes on asking language and such it blacks out. Everything is still running but the screen goes black. Im booting of my HDD right now to still use my computer. I used the 6g Sata cable and plugged it into the 6g sata slot on the mobo I formatted the SSD and tried again but nothing worked. The first time around it wasn't working so I tried installing windows in safe mode but it was going extremely slow so I canceled. The screen then froze so I restarted. Im not sure if i messed anything up by doing this. I tried only having the SSD plugged in as well when I install but the same thing happens.
My other hardware:
Asus Sabbertooth P67
EVGA 560 ti superclocked ds
Intel 2500k
Creative sound blaster audigy
Rosewill Blackhawk case
Zalman 9900nt
I messed up my computer really badly.I used a theme installer (from the 'Windows Club' website) to install the glass onion theme for windows 7.After I restarted my computer and logged in. my desktop is Black (nothing is on the screen). I have tried everything to fix this:I have tried sfc /scannow....but I get this error: "sfc scannow windows resource protection could not perform the requested operation"I checked my disk for errorsI don't know what to do now, because I did not create a restore point (because I didn't know how to do it...I do now)
View 6 Replies View Relatedi changed the OS of my laptop from windows7 starter to windows ultimate x64. but i cant connect my laptop to the internet. some drivers are missing. {2 BASE SYSTEM DEVICE DRIVER missing, ETHERNET CONTROLLER DRIVER missing, NETWORK CONTROLLER and VIDEO CONTROLLER DRIVER is also missing.} solve this?i tried to install the ethermet driver i downloaded. but it always shows this error " error:failed to install, no device driver is present to your computer"
View 1 Replies View RelatedI've just installed windows 7 from dvd over windows XP. Installation went fine and really quick but on the last restart and first starting up of windows 7 screen become black and i cant do anything. The only thing that i see on the screen is flickering bios cursor and only command that respond is ctrl+alt+del. I cant get into my bios at all.
View 1 Replies View RelatedBuilding new pc and I am getting random blackscreens. Some times before windows7 starts sometimes hours after windows has beeen running. My mobo is ta760gm2 with athlonx2 4850, corsair tx750, ocz fatality 2x2gb, velociraptor 74gb hd and wd caviar black 1tb hd. CPU never gets over 46c I have tryied reinstalling the os several times and got many updates completed.
View 2 Replies View RelatedI was installing a new theme earlier tonight on my desktop. I got an error code when I installed the shell32.dll file but for some reason I chose to ignore it because most errors don't seem to do anything. When I restart my computer and I try to log in, the screen is black and I get an error code. I have fixed a problem similar to this when my explorer.exe file got corrupted. I went to Ctrl+Alt+Del then>Open task manager> and from there I could open chrome and download a new them installer etc but now I can't even open the task manager file because I get another error code. How on earth am I supposed to fix this shell32.dll file and get to my task manager without re-installing windows?
View 3 Replies View RelatedAlthough it worked the first time, I hit a glitch and had to reinstall Win 7 on a new build. Now, every time I try to install Intel LAN Driver V17.3.0.0 it freezes when it starts. I've formatted and reinstalled a couple times but no luck. I got the NVM Update Utility for Intel 82579V and ran it from an admin prompt, but it says it isn't needed.
View 1 Replies View RelatedI have been trying multiple times to install Windows 7 to my hp pavilion g6-1007 laptop from an installation DVD but with no success so far. The problem is that I can't proceed with the installation. Every time I put the DVD and boot from there, first I see that black screen with the bar at the bottom saying "loading files".And after it finishes, it gets to a black screen (with only a cursor present) and then it does nothing more than that. It hangs there, no matter how much time I wait. The DVD-ROM also throttles down and the HDD activity LED stops blinking at all.I thought about a crappy image, so I downloaded the repair disk iso and burned a CD with it, but then I got exactly the same behavior. I'm thinking now of perhaps trying to install from a USB stick, as a last resort.
View 4 Replies View RelatedWindows 7.build 7000 update
1) download any Drivers Backup software, like DriverMax which is Free
2) boot your Vista or previous Windows 7 which has working Intel drivers and "Export" your video drivers from your Drivers Backup Software, say DriverMax
3) boot to Windows 7.build 7000 and "Import" your drivers in your Drivers Backup Soft, like DriverMax
Installing Windows 7. It just finished copying all the files to the harddrive and then it restarts to complete the installation (you know, the part where you type your namem computername and so on)
But after the restart, I can see it starting, Windows logo and all... But it looks like it's going to start but then, it's just a black screen. But I can see my mouse, and move around, on a completely black background.
Tried booting the computer it in safe made, but the installation program said it can't continue in safe mode and restartet. Aaaand I was back at the black screen. Tried doing the install again, and some problem.
Windows 7 Home, SP1. Black Screen with Moveable Cursor followed by driver issues with mouse.My diablo3 account got hacked about a week ago. Following that, I reinstalled Malware bytes, ad-aware, and spybot and did full scans/immunizations with each. I think I had one hit with spybot in my cookies? Nothing like a keylogger.A few days later, after my first reboot to install a flash update or something, I got the Black Screen with cursor after bootup. It actually took a really long time to go black - there was a lot going on. A couple updates were downloading/ installing, but then after like 5 minutes of non-responsive explorer (couldn't open start menu) it went to Black Screen with cursor. Happened again upon reboot.Booted to safe mode with networking, found a forum post that mentioned something about dll access permissions. I loaded up that section, fixed my administrator permissions to all. It did some things, but threw errors for C:\windows\system32 and C:\program files(x86), if I remember correctly.Tried rebooting normally, it worked. Couple days later, automatic windows update rebooted my computer, and my mouse (razer) stopped working. I believe this is a driver issue, as I had the same problem when I first installed the mouse. The buttons work fine but it doesn't pick up the movement.I'm worried I haven't fixed the issue completely, and I'm not entirely sure where it came from in the first place. It should be noted that I don't have easy access to another system to boot under to change the drive permissions that way.
View 4 Replies View RelatedI have an HP DV8T entertainment laptop with an Nvidia GeForce GT 230M. The current driver is version 267.67. The latest from Nvidia is 280.26.
When I install 280.26, everything appears to go great...until I re-boot. I get the boot screen with the windows logo and the swirly dots. After that, nothing. Just a black screen with the cooling fans screaming.
I tried to uninstall the current 267.67 driver and then install the 280.26 version but I get a pop-up that says "No compatible device found." I also tried to "Uninstall current driver" from the custom install menu on the Nvidia installer. Again, everything appeared to go well until re-boot. Logo, swirly dots...black screen.
Thank goodness for the ability to create system restore points or I could possibly be re-installing Windows. why I am unable to successfully update this driver?
I need some help with my Windows 7 installation.
I've finally installed the RC build (7100 x64) on my Samsung SA11 notebook,
but after the installation of the latest nVidia drivers available for my card
I only get a black screen after I restart the PC. Any ideas?
We are having this issue on Windows 7 x86 Ultimate with an Asus M2N-VM DH mobo, which has an NVIDIA GeForce 6150 SE / nForce 430 GPU. If we leave the default driver that Windows installs, we can use Media Center full screen, BUT we can't run the native resolution of the monitor, which is an LG L245WP-BN. When we try to run the install disk supplied with the mobo, which supposedly contains Vista drivers, we get an error saying they "can't be installed on this operating system."
View 2 Replies View RelatedI've been updating my graphics driver (Nvidia GeForce 9300M GS) and it's the correct version and after a while of the installation my screen turns black.
My Computer:
Windows 7 Professional x32
Nvidia GeForce 9300M GS
Processor: Intel(R) Core (TM)2 Duo CPU P7450 @ 2.13GHz 2.13GHz
Ram: 3.00 GB
After wrestling with 'black screen' on wake up issues and 'Display driver stopped...' pop-ups, I joined the forum today and thought I'd start a thread with a copy of a reply I posted to some older threads on SevenForums related to this issue.
I think some of the black screen video driver troubles are being caused by either incompatible Power Plan settings... or poor uninstalls of older video drivers... or both. this is only a suspicion and nowhere near a certainty, which is really why I'm putting it out there.
my screen goes all black for a couple of seconds then when it returns the open tabs/sites are kinda inactive for another couple of seconds, or when i click on another window, it is highlighted but the content is of another site/tab. when this happens, there is usually a message at the bottom left of the screen that "Display driver has stopped working and recovered problems"
View 1 Replies View RelatedAbout 6 months ago I had several issues with my screen flickering. I thought it was just an old monitor so I replaces it. No problems, however the last 48 hours my screen goes black then sometimes it will come back on and say that my display driver crashed. I've tried looking around but i see no error reports or anything on the driver. I am using a NVIDIA GeForce 7600 GS. I just uploaded the complete system specs to the website.
View 1 Replies View Related - Win 7 RC 7100 32 bit does not load the correct graphics card driver and even the boot menu is not displayed correctly (fuzzy black screen, issue known from Ubuntu installations where it was solved by adapting boot loader specifications…) I do know however, that the boot menu is loaded correctly as “arrow down” + “enter” starts XP without any issues.
Win 7 is somewhat loaded, when hitting “enter” only in what I think must be the boot menue. Harddrive gets active and for 5 secons I even get a “black screen in normal resolution” with the arrow displayed correctly. Then unfortunately returning to fuzzy mode.
Questions:
- How to boot Win 7 in vga or graphics modus being blinded? When hitting F8 hard drive reacts differently, but how then to select the right boot option without seeing anything?
- Is there an option to install a different graphics card driver into win 7 via the working XP?
- Is there an option to modify the boot menu’s options via working XP, e.g., setting to vga modus (that did the trick for Ubuntu).
- Any experience with Radeon Mobility 9600 (MV350) under Win 7?
we have an nvidia card, it was failing for a few days, i.e. we d have to reboot it in safe, uninstall and reinstall a driver,a nd it would work. now we can get into the bios but if it comes up in anything other than safe mode its a black screen with a cursor, no sound. monitor is not split to 1 and 2.
View 1 Replies View RelatedAll of a sudden my screen was black. my background , wallpaper are gone.I can change it to a different but I can't get my old background back. When I try to reset them , it goes black. I didn't do anything to it that I can think of.
View 4 Replies View RelatedI bought a new laptop now and I am not so well with the technology it says: Intel Corporation driver update for Intel(R) Management Engine Interface so what do I need to do now?
View 2 Replies View RelatedAt the moment when you install Windows 7 it uses rather generic Microsoft drivers for chipset and other items on the motherboard. Im thinking of installing the proper Intel ones from Download Search Results but since they dont have Windows 7 drivers yet, Ill just use the Vista ones.
Im just wondering which of those drivers on that page Ill need to download for everything thats on my motherboard (DX48BT2) and any of its on board items like nic etc (I have a separate Creative sound card).
i've just installed Windows 7 ultimate x86 on my new SERVER PC and i have BSOD when it expand windows files, so i choose install it's hard drive on an another pc, then i pull back the hard drive to my server and it's work and logging to my dekstop but it's just for a while when my server pc be BSOD again?
View 1 Replies View RelatedWhen I try to install it at the end I get this message:
Uploaded with ImageShack.us
I tried going into cmd and typing ''regsvr32 VbScript'' and it worked as it should, but even after I removed the driver and tried installing it again it still did not work.
What are the requirements for installing Display_Intel_VSW7_32_8.15.10.2057-2?
View 1 Replies View Related