[System Restore] How To Reinstall The Windows 7 Boot Files In MBR
Jan 15, 2012
I used to have Windows 7 which works flawlessly... I used to have linux Mint 11 dual booting with Windows 7, I recently upgraded to Linux Mint 12 and from that upgrade I cannot see the windows 7 option in the boot menu.. I tried to reinstall the boot loader of windows 7 from the Windows 7 CD but when I press "Repair Your Computer" then it does not show any operating system existing on my computer... install the boot menu in the MBR again.
View 1 Replies
ADVERTISEMENT
May 19, 2012
my Windows 7 after restoring it to factory configurations. I installed Ubuntu 12.04, the installation smooth as butter, but after a few days of usage, the GRUB system screwed up. After a LOT of problems I managed to restore my Laptop to its default configuration. Then, I tried to restore my personal files with the DVDs I made, but when the manager finished, it only showed a folder with all my files in it! And it didn't give me any option to restore these files or something!
View 3 Replies
View Related
Oct 19, 2012
Did a system restore in Windows 7 and my dual boot system (Windows 7&XP) won't boot. It's looking for a boot device. When I put in a Hiren boot 10.6 disk, the dual boot option is one of a number of alternatives, and it allows me to get into my pc. How can I get back to having the system work like it did before? So it boots to the dual boot option without Hiren.My SSD drive is the main drive for Windows 7 &XP. It has two partitions.
View 1 Replies
View Related
Feb 18, 2013
The last 2 viruses I have caught have made it impossible to use system restore. I had about 10 or 12 restore points and when I tried to use systemrestore after getting the virus, they were all gone.My question is: Is it possible to save a copy of a systemrestore pointin another directory (maybe on a second hard drive) so that a virus wouldnot be able to destroy it? Or is there a way to make windows 7 storerestore
View 2 Replies
View Related
Sep 30, 2012
I recently did a system restore and when I started it up some of the documents are gone from the desktop. retrieve them they where word files .
View 1 Replies
View Related
Sep 29, 2009
Just today I needed to reinstall XP on the same partition that it was on. Now my problem is that because of the reinstall, the bootloader that Windows 7 changed is now gone and I no longer have the option to select Win 7 during bootup.
Is there away to get the option back without having to re-install Windows 7 all over again?
View 9 Replies
View Related
Jan 29, 2012
I have a HP desktop with Windows 7 Home I believe. I have spent the last 3 months or so downloading files from the internet, sadly to say that I just noticed that my anti-virus software had expired. I have around 30 GB of files I would like to keep, but would like to do a system restore back to brand new. I have tried SugarSync to upload those files, and have been watching the upload screen for about 2 weeks now with 800 files still to upload. How can I keep my files and restore my system internally? I'm basically computer illiterate and don't want to spend the money for a program to help or for a flash drive or dvd's.
View 7 Replies
View Related
Dec 10, 2012
I've just ran a full system restore on my niece's Dell Inspiron N5030 which runs Windows 7. After the restore the laptop restarted and went into the setup screen... then it tells me it's unable to continue the setup whilst in safe mode and asks me to restart...thus the loop continues.how to start in normal mode and continue the setup?I've tried going to the black boot screen which has a variety of options including "Start Windows Normally" but none of these worked.
View 10 Replies
View Related
Dec 16, 2011
I recently lost some files, so I did a system restore to a date that the files were intact to retrieve them. However, while the programs on the computer are now correctly set back to the system restore date, the files in question are still missing (at least partially). I'm curious is there exists a way to restore not the applications and system settings, but simply to restore old files, or if it's too late at this point. I suspect if I went to a professional they would be able to work some magic to restore the actual files, but it wouldn't be a standard procedure, and I don't have the funds right now to do so.
In more detail: I had XAMPP installed so I could do local testing before putting websites I was working on online. As such, the folder in which I kept all my local data for web development work was within XAMPP's 'htdocs' folder, which is where the local files needed to be stored so that apache and php could utilize them. However, since the install of XAMPP, i'd been having issues getting Apache to run - it worked occasionally, but would usually quit after a second of running each time I started it (that's a whole other issue though). In any case, because I couldn't figure out why Apache wasn't working in my XAMPP install, I decided, 'screw it, I'll give WampServer a try instead, and proceeded to uninstall XAMPP then restart the computer to get a clean slate before installing WAMP. Of course, I foolishly spaced the fact that all my local web development files were stored in the XAMPP files, and they were all deleted during the uninstall. So I proceeded to do a system restore to about 24 hours ago (the most recent system restore point). It seemed fine at first, until I tried to get my old web dev files back: I went to the htdocs folder in my now-restored XAMPP folder, but the old files were not intact! It seems that while XAMPP is back on my computer, all the files that were deleted during the initial uninstall were not restored. Specifically, and I can't for the life of me figure out why this would be, but the only parts that remained were the file structure (all the old folders where there, but not many of the files within them), Javascript files, and favicon image files. Everything else is still missing.
is there a way, within windows, to actually restore all those old files? Or due to the sequence in which the uninstall of XAMPP then the restore went, is it too late?
View 5 Replies
View Related
Dec 28, 2011
I had a bootcd error that was fixed with system repair disk however all documents files cannot be found
View 1 Replies
View Related
May 29, 2012
In my system I have three operating systems installed for me to boot into - Windows 7, XP & Ubuntu. Windows 7 is the default and probably even the most used one.The problem is that each time I boot into Windows XP, Windows 7's system restore points get wiped out totally. The same does not happen with XP though.
View 14 Replies
View Related
Jan 1, 2013
I have recently installed windows ultimate x64 on my computer.i have an asus p6t deluxe v2 mobo, i7-960 cpu and a wd velociraptor hdd. The install went ok, I even managed to restart my computer a few times after but after windows updates installed it won't boot. I tried to boot into safe mode, restore from the installer, and repair, none worked. After startup repair it says: "a patch is preventing the system from starting" and I get a 0x1f error code.(Preventing windows from downloading any updates didn't work either)
View 9 Replies
View Related
Oct 8, 2011
Recently my computer was attacked by a virus. The virus made it so I couldn't access my C drive at all, but could still use all my start up progams. For some reason it also erased all of my desktop icons, except for diablo2 LOD (don't know why that one was still there....). Anyway, after removing viruses with malware bytes I did a system restore to about 2 weeks prior. After the computer was done everything seemed fine. Computer was running fine etc. My problem is files that were contained in my folders seem to have disappeared.
I know the files are still on the hard drive, but some of my folders disappeared (these are folders I created long before what the restore date was) making me unable to access the files unless I remember their names and can type them in the windows explorer. I discovered the files were still there when running a video game emulator, i clicked open rom, and just typed in the file name of one of my games I couldn't get to through my computer anymore, and it worked, game loaded up. How I can get my folders to come back, so I can easily access the files in them.
View 6 Replies
View Related
Mar 14, 2012
Laptop got a little sluggish and some programs (Firefox, Waterfox, Handbrake etc) were crashing all the time. Uninstallation using Revo Uninstaller and reinstallation didn't seem to solve the problems. So had to restore the system to previous restore point which restored to the OS+updates to that day+ a few essential programs.
Now I am left with the system where there are no programs but settings are still there, so when I am installing the programs, it takes these settings to run. I was wondering how do I delete these settings?
View 1 Replies
View Related
Aug 30, 2011
How to Restore Backup User and System Files in Windows 7 ?
View 0 Replies
View Related
Dec 19, 2012
I recently purchased a new Toshiba 1tb HDD. My old WD 1tb HDD has been giving me trouble of late. I occasionally get the BSOD. Also, on occasion, when I reboot the computer it automatically runs the chkdsk program and reports several bad clusters. However the chkdsk program never seems to flag the bad clusters, so periodically, when I reboot, it runs and reports them again.
I would like to image or backup all of the files on my problem HDD, then do a fresh install of Win 7 Ultimate 64bit (my current OS) to the new HDD, then restore the cloned or image system and program files to the new HDD. I don't want to have to go through the process of reinstalling everything again, when everything seems to be working okay. Since the Win 7 image program makes and exact image of the HDD, then to use that program would cause the new install of Win 7 Ultimate 64bit to be overwritten by the image restore. Therefore, if there should be corrupt data under a bad cluster from the old HDD, that data would not be transferred and my existing problem would be transferred to the new HDD.
On the other hand, if I do a disk clone, I am not sure that the existing programs would continue to operate on the new HDD, and would require a fresh install of each program after the fresh install of the Win 7 OS! I would have then wasted my time doing a transfer of program/data files to my newly formatted and freshly installed OS.
Does anyone know of any program (Acronis True Image, Paragon, Norton Ghost, Macrium Reflect, etc.) that will let you image or clone the program and data (incuding the necessary operational files such as: Win32 system files, activation files, etc.) so that they will work correctly on the fresh install of the OS?
View 3 Replies
View Related
Jun 24, 2012
Earlier this evening I downloaded My Colors and put it on my computer. For some reason it wouldn't load up all the icons and was messing up my browser when I would go online. I did a system restore back to a previous date. Now I am in a huge mess. It will not boot up fully. I get a window with an easy access button in the lower left corner and a shut down button in the lower right corner and that is it. I don't want to do a full restore. I have a Dell Inspiron 1545 laptop. It is running Windows 7. I'm not sure what more information you need or that I can really get to you at this time.
View 4 Replies
View Related
Apr 18, 2012
I got the smart hdd virus last night, I tried to install malwarebytes but it was blocked by the virus, so I did a system restore from safe mode to 5 days ago. When the restore finished, it booted and said that the restore had not fully worked, but it appeared to have had, with all my files visible again, same with my programs. I then installed malwarebytes and restarted. In the middle of booting windows, it bsod'ed, I did not catch the error message. It does this when I try to boot every time. When it goes into system repair, this message:Windows failed to start. A recent hardware or software change may have caused the problem. To fix this:
1. Insert your windows installation disc and restart the computer.
2. Choose your language settings, then click next.
3. Click repair your computer.
If you do not have this disc, please contact your system admin or manufacturer for assistance.Status: 0xc000000e Info: The boot selection failed because a required device is inaccessable.I do not have a Win 7 home premium disc, only a win7 pro disc. I am able to make a clean install if required with the pro disc.Will this work with the windows 7 professional disc?
View 3 Replies
View Related
Oct 27, 2011
I am familiar with System Restore, selecting earlier times, and the often-available option of undoing a System Restore. But I found out (too late) that according to Microsoft, System Restore done in Safe Mode is not able to be undone.I lost 1,000's of photos doing the system restore, now the only restore point option visible is what I believe to be the new one after I did the restore. Prior to me doing the System Restore, there were a number of times from me to choose from, I just chose one that was 10 days ago. Is there any software, method, or hack that I can use or do to recover the thousands of photos that were on my desktop and that were in folders on my desktop? It's a 1 TB HD?
View 1 Replies
View Related
Mar 8, 2012
My Acer Aspire one D257 will not restore. Error code is 0x8007191. All desktop icons when clicked go to "notepad" and "notepad" showing for everything to the left except for internet explorer. I have tried restore 6 times but it just comes back with. Bottom right hand icons still normal...files can be accessed through start docs. pics, etc. I have backed up to a remote drive all files for safety but just cannot get system or files to restore.System restore did not complete successfully. Your computors files and settings were not changed.Details System restore failed while restoring the registry from the restore point. An unspecified error occurred during System Restore (0x80071a91) The error code has just changed to the above.
View 1 Replies
View Related
Oct 19, 2012
My computer during system restore was turned off and keeps saying loading files what can I do to reset it to factory I did the f8 and the zero ideas already.
View 2 Replies
View Related
May 10, 2012
I am attempting to restore from a system image, but keep receiving a boot manager error message: Status: 0xc000000e Info: The boot selection failed because a required device is inaccessible
The computer boots no problem normally, it is only when restarting to restore the system image.
View 4 Replies
View Related
Sep 21, 2012
After a power outage, my windows 7 will not boot without going into safe mode.How can I restore my system to boot automatically without going into safe mode.
View 1 Replies
View Related
Jul 31, 2011
All discussion will pertain to Windows 7 Backup w/ NTFS disks w/ample space. Period. It shouldn't matter if the disks are simple or dynamic. The simple situation is this: I have one simple NTFS boot disk that failed months after system image backups to my other internal HDD. So then I replace this boot disk w/ a new one. So Am I able to restore the system image from the HDD onto to the new boot disk?
View 4 Replies
View Related
Oct 21, 2012
My Sony vaio just turned off last week and wont boot up. It turns on an flashes Sony vaio but that's all. I made a recovery disk and I can get into bios so I tried booting from internal disk and tried startup repair got nothing, tried system restore for every restore point and none will finish. Took each piece of ram out an tried starting it up to see if bad ram was the problem and it starts the same way. I also tried the restore from previous image but I have no image. So I don't know what else to try. Windows 7
View 15 Replies
View Related
Jan 4, 2013
A few days ago, I went to turn on my computer and it just gave me a black screen after the "Starting Windows" screen. I attempted to use System Repair, which failed. It said there was an unspecified error possibly caused by a change in system configuration. I have not changed anything on my computer, for the record, between the last time it worked and now. My husband said it downloaded updates, which would explain why it was off in the first place instead of just being on stand-by. Anyway, I then tried System Restore, which also failed. I can get it to start in Safe Mode with Networking, but it seems that everything I try to run to figure out what the problem is, is saying it can't find the problem. I enabled bootlogging and found this...
Did not load driver @nettun.inf,%isatap.displayname%;Microsoft ISATAP Adapter
Did not load driver @nettun.inf,%isatap.displayname%;Microsoft ISATAP Adapter
Did not load driver @nettun.inf,%teredo.displayname%;Microsoft Teredo Tunneling Adapter
Did not load driver @hal.inf,%acpi_amd64.devicedesc%;ACPI x64-based PC
Did not load driver @battery.inf,%*compbatt.devicedesc%;Microsoft Composite Battery
Did not load driver @netavpna.inf,%mp-agilevpn-dispname%;WAN Miniport (IKEv2)
[code]....
View 3 Replies
View Related
Apr 10, 2012
System Restore will not create a restore point or restore to a previous date & time.The error message was: A restore point could not be created: An error was detected in the Volume Shadow Copy Server (VSS).The problem occurred while trying to contact VSS writers. Verify that the Event System Sevice and the VSS service are running & check for associated errors in the event logs (0x80042318).Volume Shadow Copy is started & running (done in system events).Event System Sevice and the VSS service are started and running. But no cigar, SR still broken.
View 9 Replies
View Related
Aug 10, 2011
Does anyone know how to schedule/automate a rollback to a system restore point at a set time each day?What i'm trying to do is:1. Disable the standard system restore behavior for creating restore points when installing apps and drivers.2. Automatically/schedule a restore point to be created every morning. (probably using Task Scheduler)3. Automatically/schedule a rollback to that morning restore point every night.This should allow users to mess up the workstation during the day, and restore a working rollback point at night when users are not using a workstation.Updates are scheduled at nighttime, so before that happens, it should rollback to a good restore point, apply updates, then create a working "new" restore point with the updates in the morning....etc.
View 4 Replies
View Related
Mar 28, 2012
my desktop computer won't boot. When I turn it on it displays the welcome splash screen and then goes black. A message will then display that says CMD failed to start and then it will shut down. It does the same thing in safe mode as well.My question is. I have already set up the HD from the desktop as an external to my laptop so I could get files off it. Is there any way to do system restore on the hard drive when it is set as an external? Because I did this last night and I think if I restore the drive it will fix it.
View 2 Replies
View Related
Oct 27, 2012
I have lost my user account and folders and files, music and pictures . I have tried system restore but no success.
View 8 Replies
View Related
Apr 30, 2011
I've got Windows 7 and Ubuntu Linux on different partitions, so if I were to recover windows 7 by the Advanced Recovery Method restoring to factory condition, would this action delete/affect my precious Ubuntu in any way? Is the restoring applying to that partition or the whole computer?
View 9 Replies
View Related
