Files Not Showing Up In Folder After System Restore
Oct 8, 2011
Recently my computer was attacked by a virus. The virus made it so I couldn't access my C drive at all, but could still use all my start up progams. For some reason it also erased all of my desktop icons, except for diablo2 LOD (don't know why that one was still there....). Anyway, after removing viruses with malware bytes I did a system restore to about 2 weeks prior. After the computer was done everything seemed fine. Computer was running fine etc. My problem is files that were contained in my folders seem to have disappeared.
I know the files are still on the hard drive, but some of my folders disappeared (these are folders I created long before what the restore date was) making me unable to access the files unless I remember their names and can type them in the windows explorer. I discovered the files were still there when running a video game emulator, i clicked open rom, and just typed in the file name of one of my games I couldn't get to through my computer anymore, and it worked, game loaded up. How I can get my folders to come back, so I can easily access the files in them.
I tried copying some .jpgs in subfolders from a different machine and pasting them onto the Acer. The copy and paste processes looked entirely normalOn the Acer MyPictures properties shows 2.95 GB with 456 files and 24 folders which is correctHowever with the exception of a couple of sub folders none of the .jpgs can be seen in Windows Explorer.Start>Searching for .jpg shows all the files with a path C:UsersuserNamePictures even though I only saved them in C:UsersuserNamePicturesMy Pictures . Not all the copied sub folders can be seen but those which can be seen show in both locations. Using Search it is possible to open and view any of the images whether or not the sub folder in which they are stored shows in Pictures and My Pictures.
Currently running windows 7 64 bit. My problem is that my windows will not boot up and will just sit at the 'loading' screen forever and nothing will happen. I've tried using the system restore function but whenever it loads to the blue screen the window pops up for not even a second and goes away. I've tried running a repair/install disk and running in safe mode does not work either. Also the F8 functions won't do anything either, restore to a working point etc. I've scanned for malware and nothing shows up. Windows was working just fine until I normally restarted it and this problem occurred. I'm not sure what the next step I should take to fix this problem is.
my Windows 7 after restoring it to factory configurations. I installed Ubuntu 12.04, the installation smooth as butter, but after a few days of usage, the GRUB system screwed up. After a LOT of problems I managed to restore my Laptop to its default configuration. Then, I tried to restore my personal files with the DVDs I made, but when the manager finished, it only showed a folder with all my files in it! And it didn't give me any option to restore these files or something!
On my Dell Windows 7 laptop (Studio 1555) I have the System Volume Information showing (despite checking "hide system files" and hide hidden folder options enabled). The folder is also accessable from my admin account (not the root admin but the admin of the PC).
This may be normal, but not normal to me. I just installed Win 7 a few days ago and am still learning after years on XP.When I open System Restore, I only get one restore option, and it's from last night. When I check the block for show more options there is no change even after I close/re-open Sys Restore.Doesn't the system create a new restore point on boot? Doesn't it keep older restore ponts? Also, I want all my files to open with large icons. In many of the folders I can't find a "view" option anywhere/anyway.
My laptop was getting BSoDs. I tried a system recovery but after it failed, I brought it to a computer shop where they tried three more reinstalls of Windows 7, and Vista to try fix it. I have four Windows.old files - Windows.old, Windows.old.000, Windows.old.001, Windows.old.002. I want to restore the files from my documents from my first version of Windows 7 but there are no files in the My Documents folder in Windows.old. Is it possible to recover the files.
I have a HP desktop with Windows 7 Home I believe. I have spent the last 3 months or so downloading files from the internet, sadly to say that I just noticed that my anti-virus software had expired. I have around 30 GB of files I would like to keep, but would like to do a system restore back to brand new. I have tried SugarSync to upload those files, and have been watching the upload screen for about 2 weeks now with 800 files still to upload. How can I keep my files and restore my system internally? I'm basically computer illiterate and don't want to spend the money for a program to help or for a flash drive or dvd's.
I recently lost some files, so I did a system restore to a date that the files were intact to retrieve them. However, while the programs on the computer are now correctly set back to the system restore date, the files in question are still missing (at least partially). I'm curious is there exists a way to restore not the applications and system settings, but simply to restore old files, or if it's too late at this point. I suspect if I went to a professional they would be able to work some magic to restore the actual files, but it wouldn't be a standard procedure, and I don't have the funds right now to do so.
In more detail: I had XAMPP installed so I could do local testing before putting websites I was working on online. As such, the folder in which I kept all my local data for web development work was within XAMPP's 'htdocs' folder, which is where the local files needed to be stored so that apache and php could utilize them. However, since the install of XAMPP, i'd been having issues getting Apache to run - it worked occasionally, but would usually quit after a second of running each time I started it (that's a whole other issue though). In any case, because I couldn't figure out why Apache wasn't working in my XAMPP install, I decided, 'screw it, I'll give WampServer a try instead, and proceeded to uninstall XAMPP then restart the computer to get a clean slate before installing WAMP. Of course, I foolishly spaced the fact that all my local web development files were stored in the XAMPP files, and they were all deleted during the uninstall. So I proceeded to do a system restore to about 24 hours ago (the most recent system restore point). It seemed fine at first, until I tried to get my old web dev files back: I went to the htdocs folder in my now-restored XAMPP folder, but the old files were not intact! It seems that while XAMPP is back on my computer, all the files that were deleted during the initial uninstall were not restored. Specifically, and I can't for the life of me figure out why this would be, but the only parts that remained were the file structure (all the old folders where there, but not many of the files within them), Javascript files, and favicon image files. Everything else is still missing.
is there a way, within windows, to actually restore all those old files? Or due to the sequence in which the uninstall of XAMPP then the restore went, is it too late?
The last 2 viruses I have caught have made it impossible to use system restore. I had about 10 or 12 restore points and when I tried to use systemrestore after getting the virus, they were all gone.My question is: Is it possible to save a copy of a systemrestore pointin another directory (maybe on a second hard drive) so that a virus wouldnot be able to destroy it? Or is there a way to make windows 7 storerestore
Laptop got a little sluggish and some programs (Firefox, Waterfox, Handbrake etc) were crashing all the time. Uninstallation using Revo Uninstaller and reinstallation didn't seem to solve the problems. So had to restore the system to previous restore point which restored to the OS+updates to that day+ a few essential programs. Now I am left with the system where there are no programs but settings are still there, so when I am installing the programs, it takes these settings to run. I was wondering how do I delete these settings?
I used to have Windows 7 which works flawlessly... I used to have linux Mint 11 dual booting with Windows 7, I recently upgraded to Linux Mint 12 and from that upgrade I cannot see the windows 7 option in the boot menu.. I tried to reinstall the boot loader of windows 7 from the Windows 7 CD but when I press "Repair Your Computer" then it does not show any operating system existing on my computer... install the boot menu in the MBR again.
I recently purchased a new Toshiba 1tb HDD. My old WD 1tb HDD has been giving me trouble of late. I occasionally get the BSOD. Also, on occasion, when I reboot the computer it automatically runs the chkdsk program and reports several bad clusters. However the chkdsk program never seems to flag the bad clusters, so periodically, when I reboot, it runs and reports them again.
I would like to image or backup all of the files on my problem HDD, then do a fresh install of Win 7 Ultimate 64bit (my current OS) to the new HDD, then restore the cloned or image system and program files to the new HDD. I don't want to have to go through the process of reinstalling everything again, when everything seems to be working okay. Since the Win 7 image program makes and exact image of the HDD, then to use that program would cause the new install of Win 7 Ultimate 64bit to be overwritten by the image restore. Therefore, if there should be corrupt data under a bad cluster from the old HDD, that data would not be transferred and my existing problem would be transferred to the new HDD.
On the other hand, if I do a disk clone, I am not sure that the existing programs would continue to operate on the new HDD, and would require a fresh install of each program after the fresh install of the Win 7 OS! I would have then wasted my time doing a transfer of program/data files to my newly formatted and freshly installed OS.
Does anyone know of any program (Acronis True Image, Paragon, Norton Ghost, Macrium Reflect, etc.) that will let you image or clone the program and data (incuding the necessary operational files such as: Win32 system files, activation files, etc.) so that they will work correctly on the fresh install of the OS?
I am familiar with System Restore, selecting earlier times, and the often-available option of undoing a System Restore. But I found out (too late) that according to Microsoft, System Restore done in Safe Mode is not able to be undone.I lost 1,000's of photos doing the system restore, now the only restore point option visible is what I believe to be the new one after I did the restore. Prior to me doing the System Restore, there were a number of times from me to choose from, I just chose one that was 10 days ago. Is there any software, method, or hack that I can use or do to recover the thousands of photos that were on my desktop and that were in folders on my desktop? It's a 1 TB HD?
My Acer Aspire one D257 will not restore. Error code is 0x8007191. All desktop icons when clicked go to "notepad" and "notepad" showing for everything to the left except for internet explorer. I have tried restore 6 times but it just comes back with. Bottom right hand icons still normal...files can be accessed through start docs. pics, etc. I have backed up to a remote drive all files for safety but just cannot get system or files to restore.System restore did not complete successfully. Your computors files and settings were not changed.Details System restore failed while restoring the registry from the restore point. An unspecified error occurred during System Restore (0x80071a91) The error code has just changed to the above.
My computer during system restore was turned off and keeps saying loading files what can I do to reset it to factory I did the f8 and the zero ideas already.
I am working in Windows 7 XP Mode, trying to install and run a Microsoft utility called: WT1230: Batch File Converter for PowerPoint for Windows 95. (See WT1230: Batch File Converter for PowerPoint for Windows 95). Yes, the utility is intended for Win95, but I'd like to see if I can get it running in XP Mode. The utility installation instructions ask that I copy 2 files to the "Windows/system" folder. Of course, these instructions were written for Win95, not XP, let alone XP Mode. Still... if I copy the files, the core executable runs fine, but it can't find the 2 files that should be in "Windows/System". So, I gather XP Mode must have its own Windows/System folder.
System Restore will not create a restore point or restore to a previous date & time.The error message was: A restore point could not be created: An error was detected in the Volume Shadow Copy Server (VSS).The problem occurred while trying to contact VSS writers. Verify that the Event System Sevice and the VSS service are running & check for associated errors in the event logs (0x80042318).Volume Shadow Copy is started & running (done in system events).Event System Sevice and the VSS service are started and running. But no cigar, SR still broken.
Does anyone know how to schedule/automate a rollback to a system restore point at a set time each day?What i'm trying to do is:1. Disable the standard system restore behavior for creating restore points when installing apps and drivers.2. Automatically/schedule a restore point to be created every morning. (probably using Task Scheduler)3. Automatically/schedule a rollback to that morning restore point every night.This should allow users to mess up the workstation during the day, and restore a working rollback point at night when users are not using a workstation.Updates are scheduled at nighttime, so before that happens, it should rollback to a good restore point, apply updates, then create a working "new" restore point with the updates in the morning....etc.
During multiple file coping(file transferring) from one folders to other folders while minimizing all the folder at the time, check the status in taskbar, it showing all folder as file coping folder. is it expected in aero themas or its issue.
I am having some issues playing Starcraft II that I didn't use to have when I first assembled the computer. I wanted to restore back to where I was several months ago, but the restore point isn't listed in System Restore. In fact, only 3 restore points are offered and they are all in the last few days.I looked at the space available to save these restore points and it was only using 1.59 GB of an allowed 2% which is 10 GB
So I cleaned my registry using RegSeaker and now my computer BSODs at the 'starting windows' screen, even if I try to start in safe mode. I created a backup of my old registry before cleaning and I can access it using the command prompt that you can access in the system restore options. However, when I try to update the registry with it I get an error message saying 'cannot import.
OK, so a couple of days ago, my HP desktop crashed and then went through the whole System Recovery loop(I couldn't login to Safe mode, wouldn't let me past the System Recovery Screen). Well I backed up the entire C drive using Backup your files in the menu. Then it shows you all the file types it will back up; i.e photos, videos, e-mails and bookmarks. So I did that to an external hard drive and it comes out to 143GB.Now comes my problem. I've been able to copy everything from the external hard drive using RecoveryMgr.exe which opens the WIM files and saves them to my C: hard drive under System Recovery Files. However it does not seem to work when it comes to putting in my old Thunderbird e-mails, contacts and such or in Firefox to restore my bookmarks, saved passwords.
I am trying to restore my computer because it launches into system recovery. After I get to the recovery options I tried to do system restore but it tells me there isn't enough space on the disk.
I have tried a lot of things and I can't get system restore to work. I don't need to use it but I would like my computer to be working since there is no reason for this not to work. I just keep getting ComPlusStaging failed to obtain original copy from %systemroot%/registration all the time.
I have an old HD that I used to use for backups in a different PC setup, and though I deleted those backups when I moved on to a different HD, the backups were recoverable using Pandora and I believe intact since I never used the drive in question after that time. So specifically, I now have a folder called "Backup Set 2011-02-13 190024" that contains a 84 zipped folders worth 13.1GB that comprise that backup, and I want to restore them in some automatic fashion to see what's actually worth salvaging. (I assume this doesn't have to be done one-folder-at-a-time, drilling down through five layers of branches in the folder-tree, and almost immediately forgetting where I am...) But when I look at "Backup and Restore," I can't bring up this or any target folders - the link "Select another backup to restore files from" produces a blank set of choices, and there doesn't appear to be any way to 'load' a particular folder to restore, as I would have expected.
