System Restore Will Not Create A Restore Point Or Restore To A Previous Date & Time
Apr 10, 2012
System Restore will not create a restore point or restore to a previous date & time.The error message was: A restore point could not be created: An error was detected in the Volume Shadow Copy Server (VSS).The problem occurred while trying to contact VSS writers. Verify that the Event System Sevice and the VSS service are running & check for associated errors in the event logs (0x80042318).Volume Shadow Copy is started & running (done in system events).Event System Sevice and the VSS service are started and running. But no cigar, SR still broken.
I recently installed some updates in my Proline notebook, but after installing the 30 percent, it failed to restart, with the screen showing nothing (as if it's off). I then tried to restore it to an earlier time via safe mode but the restore point available is only the one as at the time of the update. I tried to create a restore point, but when i tried, i cannot even find system protection when i looked for it and it directs me to system properties where my computer's description is blank and it cannot be edited.Even the updates cannot be uninstalled via safe mode.Is there no other options i can try in order to start my laptop normally again?
I want to restore my computer to May 31, 2012 11.am so I type this in and I'm told the restore point has been created successfully. However, when it finishes I see that the computer will be restored.
can we write a windows 7 system restore point in a dvd or cd coz some virus delete the system restore point in windows 7 therefor using this cd /dvd can we restore the system can't we but c drive System Protection is on?
I really must restore my PC to last night. I only gives me an option of either two days ago or earlier this morning though. How can I restore that exact time?
I currently can't make a system image or restore point. The error I receive for the system image attempt is: The backup failed. Windows Backup timed-out before the shared protection point was created. (0x80780021)
I run win7 home on an asus with intel i7920 with 9 gig ram and nvidia gtx260. The problem I've encountered is that I am unable to restore to any previous restore point. After going through the motions, I get a message that the restore failed due to an "unspecified error occurence at 0X80071a90. It doesn't matter what earlier restore point I choose.
I wouldn't go so far to say, I'm totally computer illiterate, but not far from it.. If there's anyone out there, who's up for a challenge I'm running windows 7. I am the administrator. Someone I don't trust at all, used my PC a while back. After he (did whatever he did) I noticed I couldn't access several files. I get a "access denied" or you don't have permission to view this file, owner info etc.. I can see a lot of the files, but their either empty now or I can't view them. I have used restore many times in the past, but now I get a message " no restore points".. I don't know what he did, or if he did anything.. It could be one of my kids changed properties by mistake, before I wised up and created a basic user acct w/ limited access for them.. I almost forgot. When I go into file properties there is a red x by my user name (administrator) Not in every property, but several.. Sometimes there is a red x by other user names, as well, but mostly mine.
I have had this problem for quite a while. I'm able to create restore points (and they show up in the list), but I'm unable to 'restore' them... I get the system cannot restore error. I have Norton-Comcast and have deactivated 'tamper protection' with no luck.
I just came upon a very strange problem with my computer today. I started it as usual, ran a TuneUp Utilities check (as I usually do) and, in the meantime, was prompted by my iTunes installer to install a new version of iTunes. I clicked OK on the install thing, then all of a sudden I get this message from the HP Support Assistant: Windows System Restore is not activated. So I go to the System Protection folder to try to manually enable it, but I get an error message that says an unexpected error occurred: System restore has found an error, try to run System restore again. I do this a thousand times, and the same message pops up.
So I run my Norton antivirus and SpyBot Search and Destroy. The Norton search comes up empty, but the SpyBot returns this: Babylon Toolbar and Win32.Downloader.bltu. So I click to fix the problems and an error message pops up in SpyBot saying I'm not running it as admin, so the problems can't be fixed. Well, my user account is an admin account (the only one I have in this computer), so there's obviously something very wrong here, for it seems like whatever this is, it's keeping me from executing whatever task may remove it. I also execute sfc /scannow from a command prompt and the returning message is that I cannot run sfc /scannow because I'm not an administrator.
I want my system to automatically create a restore point before installing any program/software in it? How can set this up on my windows 7 64 bit laptop?
My problem is that installing software or running Windows Update takes loads of time (6 minutes longer than usual) while the system otherwise appears to run quickly. Running Win7x64 and Security Essentials.
Upon troubleshooting, I found that my computer cannot make System Restore Points, and it apparently tries to do so for 6 minutes. I deleted all restore points, expanded the space to 100%, and turned off and on system restore, without any success - I cannot create a restore point. My VSS service seems to be running just fine. The specific error is EID: 8193, and the text is: Failed to create restore point (Process = C:Windowssystem32 undll32.exe /d srrstr.dll,ExecuteScheduledSPPCreation; Description = Scheduled Checkpoint; Error = 0x81000101).
I have a Toshiba Satellite A505 laptop. In my experience, Toshiba has one of the worst system recovery modules which takes ages to restore. To avoid this issue, I restored my machine to factory settings, deleted crapware, updated and backed up using the tool built into Windows 7.Now after a while, I successfully messed up the system that it takes 5 minutes to boot and is as slow as a turtle. I am considering system restore using the backup I made on external HDD.My question is, if I restore using this backup, - Will it delete ALL the data put on this machine AFTER the backup was made?- Will it completely restore SYSTEM to the backup settings? i.e. deleting the folders and registry entries added by the programs installed
Would like to restore system to a recent date to reverse some s/w updates that are causing problems. Apparently the option restore point creation function in the protection section of W-7 has been turned off since 06/2012, since that is the latest date listed under the system restore listing. Can I somehow restore to a later date maybe by accessing the calendar type options page similar to that of XP?
Do you guys know of a way to save a restore point and locking it that no matter what, it won't delete? I made a restore point and then installed Windows 7 service pack 1. The service pack screwed me so bad with software and hardware I used, I regret that I didn't do an acronis backup!When trying to fix the problems, I had reinstalled various drivers and uninstalled the Service pack, thus forcing Windows to create more automated restore points. Since my C drive is configured to use %30 of it's capacity for restore points, along the way, I guess my restore point was deleted because it's not in the restore points list, even if I check "show more restore points".I want to prevent this in the future so I am asking if if anyone knows how to create a restore point and LOCK it so no matter what, my restore point won't get deleted.
I dont know what happened to me suddenly my antivirus AVG 2012 detect an intruder on the web browser and remove the browser morzila and after that I have no restore point but i dont know what happens and I feel that my PC has something strange how I can solve this problem?
I receive "The restore point selected was damaged or deleted during the restore" after I try system restore. I have already tried different restore points and have Run SFC /SCANNOW but to no avail. Did a start up repair too but no problems were detected.
So I tried posting my question on Microsoft Answers, to no avail. I kept getting an error message when clicking the submit button...don't know why though as they provided me with no details as to what could be causing the error.(In Order of most recent restore points) This is the list that I encountered after selecting Choose different restore point in the Restore system files and settings windows. [code] Final, least recent, or 6th restore point from the top called 4/2/2011 3:23:17 PM Windows Update affected programs:
--Every affected program and/or driver is the same as those listed in the 'Programs and drivers that will be deleted' list for the 5th restore point from the top. --The only program not listed in affected program list in the 5th restore point form the top is the driver Brother (Printer) 07/08/2009 01.08.00.00, which I manually installed myself also. --The 'Program and drivers that might be restored' list for the 6th restore point form the top has the same files, programs, drivers, or windows update, as the 'Programs and drivers that might be restored' list for the 5th restore point form the top.
As I asked earlier, I wanted help making a decision on what restore point I should use. Also, I wanted to know what is the best method and/or procedure when using system restore to set Window's setting back to an earlier restore point based on the details I gave up. How should I perform it or what precautions should I take, so that I encounter very little to no problems whatsoever?
At my school, every time you shut down the computer it wipes all user data (I believe) from the primary drive (or partition). So, every time the computer is started the primary drive/partition reverts to whatever restore point the IT department has set. I would like to do this to my personal computer, but the question is how? Is it something I can set the task scheduler to do? By doing some research I found that I can (not that I want to) create a new restore point at every start up with task scheduler, so it seems only logical that I can load a restore point of my choice at every start up without having to physically go into system restore at every start up.
I have 2x 600GB WD Velociraptors in RAID 0 configuration divided into 2 partitions. The (primary) C: contains Windows 7 Pro x64 and related files and the (secondary) G: has everything else (i.e. all of my developer tools, games, and misc files that all have a scheduled back up onto an external). I would like the C: to revert to the restore point of my choice at every start up. If it is a "simple" script to perform this task...great! But, if it requires extreme diligence (like an entire IT department to maintain)... forget it, it's not that big of a deal.
Restore system settings and previous versions of file is greyed out on my system, I may have disabled a required service for this. As I'm about to try the X-Fi MB2 mod again as the last time I tried it my system was messed up that it wont even recognize my actual X-Fi card properly. So I'm thinking a system restore can work with this experiment.
i was unable to create a restore point(or should i say the restore point which were created were all shown up with this following error earlier, Error message was: "System Restore" did not complete successfully. Your computer's system files and settings were not changed."Details: An unspecified error occurred during System Restore (0xc0000022).Anyways,today as i was updating my display driver,while uninstalling the old display driver and installing the latest one,my system didn't accept the driver and thus my system went out of order(more preciously,as i uninstalled the whole catalyst control centre,every icon was appearing bigger and my display adapter was also deleted). now, coming back to the problem, when i tried to go back to a restre point ,i actaually managed to get all my previous settings back but after the completion of system restore that same message was again there which saidError message was: "System Restore" did not complete successfully. Your computer's system files and settings were not changed."Details: An unspecified error occurred during System Restore (0xc0000022).Now,i am a bit confused to what actually happened as all my settings were back and the system was there in its previous setings but then why i got that error message?
So I cleaned my registry using RegSeaker and now my computer BSODs at the 'starting windows' screen, even if I try to start in safe mode. I created a backup of my old registry before cleaning and I can access it using the command prompt that you can access in the system restore options. However, when I try to update the registry with it I get an error message saying 'cannot import.