How To Set System To Last Restore Point At Startup / Shutdown
Sep 27, 2012
At my school, every time you shut down the computer it wipes all user data (I believe) from the primary drive (or partition). So, every time the computer is started the primary drive/partition reverts to whatever restore point the IT department has set. I would like to do this to my personal computer, but the question is how? Is it something I can set the task scheduler to do? By doing some research I found that I can (not that I want to) create a new restore point at every start up with task scheduler, so it seems only logical that I can load a restore point of my choice at every start up without having to physically go into system restore at every start up.
I have 2x 600GB WD Velociraptors in RAID 0 configuration divided into 2 partitions. The (primary) C: contains Windows 7 Pro x64 and related files and the (secondary) G: has everything else (i.e. all of my developer tools, games, and misc files that all have a scheduled back up onto an external). I would like the C: to revert to the restore point of my choice at every start up. If it is a "simple" script to perform this task...great! But, if it requires extreme diligence (like an entire IT department to maintain)... forget it, it's not that big of a deal.
System Restore will not create a restore point or restore to a previous date & time.The error message was: A restore point could not be created: An error was detected in the Volume Shadow Copy Server (VSS).The problem occurred while trying to contact VSS writers. Verify that the Event System Sevice and the VSS service are running & check for associated errors in the event logs (0x80042318).Volume Shadow Copy is started & running (done in system events).Event System Sevice and the VSS service are started and running. But no cigar, SR still broken.
I want to restore my computer to May 31, 2012 11.am so I type this in and I'm told the restore point has been created successfully. However, when it finishes I see that the computer will be restored.
Do you guys know of a way to save a restore point and locking it that no matter what, it won't delete? I made a restore point and then installed Windows 7 service pack 1. The service pack screwed me so bad with software and hardware I used, I regret that I didn't do an acronis backup!When trying to fix the problems, I had reinstalled various drivers and uninstalled the Service pack, thus forcing Windows to create more automated restore points. Since my C drive is configured to use %30 of it's capacity for restore points, along the way, I guess my restore point was deleted because it's not in the restore points list, even if I check "show more restore points".I want to prevent this in the future so I am asking if if anyone knows how to create a restore point and LOCK it so no matter what, my restore point won't get deleted.
can we write a windows 7 system restore point in a dvd or cd coz some virus delete the system restore point in windows 7 therefor using this cd /dvd can we restore the system can't we but c drive System Protection is on?
So I tried posting my question on Microsoft Answers, to no avail. I kept getting an error message when clicking the submit button...don't know why though as they provided me with no details as to what could be causing the error.(In Order of most recent restore points) This is the list that I encountered after selecting Choose different restore point in the Restore system files and settings windows. [code] Final, least recent, or 6th restore point from the top called 4/2/2011 3:23:17 PM Windows Update affected programs:
--Every affected program and/or driver is the same as those listed in the 'Programs and drivers that will be deleted' list for the 5th restore point from the top. --The only program not listed in affected program list in the 5th restore point form the top is the driver Brother (Printer) 07/08/2009 01.08.00.00, which I manually installed myself also. --The 'Program and drivers that might be restored' list for the 6th restore point form the top has the same files, programs, drivers, or windows update, as the 'Programs and drivers that might be restored' list for the 5th restore point form the top.
As I asked earlier, I wanted help making a decision on what restore point I should use. Also, I wanted to know what is the best method and/or procedure when using system restore to set Window's setting back to an earlier restore point based on the details I gave up. How should I perform it or what precautions should I take, so that I encounter very little to no problems whatsoever?
I really must restore my PC to last night. I only gives me an option of either two days ago or earlier this morning though. How can I restore that exact time?
i was unable to create a restore point(or should i say the restore point which were created were all shown up with this following error earlier, Error message was: "System Restore" did not complete successfully. Your computer's system files and settings were not changed."Details: An unspecified error occurred during System Restore (0xc0000022).Anyways,today as i was updating my display driver,while uninstalling the old display driver and installing the latest one,my system didn't accept the driver and thus my system went out of order(more preciously,as i uninstalled the whole catalyst control centre,every icon was appearing bigger and my display adapter was also deleted). now, coming back to the problem, when i tried to go back to a restre point ,i actaually managed to get all my previous settings back but after the completion of system restore that same message was again there which saidError message was: "System Restore" did not complete successfully. Your computer's system files and settings were not changed."Details: An unspecified error occurred during System Restore (0xc0000022).Now,i am a bit confused to what actually happened as all my settings were back and the system was there in its previous setings but then why i got that error message?
I currently can't make a system image or restore point. The error I receive for the system image attempt is: The backup failed. Windows Backup timed-out before the shared protection point was created. (0x80780021)
On my system I have an SSD, so I have (Windows Restore) turned off. When I download a program and try to install it, it says creating a Restore Point and sits there for a while. A long while. I have found that I can go into Safe Mode and install things with no problem, fast. Even after it is satisfied with the restore point and says it is installing, it will just sit there and drag on. What can I do to get things to install without Safe Mode?
I am running Windows 7 on both my new Desktop and my 2 year old laptop. My laptop was the first to receive the upgrade to 7 and has been working awesomely. The start up is phenomenal and shutdown is no hassle, however my laptop runs on the 32 bit software. Now my desktop, I just recently upgraded it to 7 last week however I haven't noticed the same performance boost as I have on my laptop. I do run 64 bit on my desktop, but I am curious as to why the shutdown and startup times are rather slow.
I have gone as far as to limit the start up programs as well as some of the boot options being the GUI boot and maximizing the number of processors that are used during startup. Sometimes even during the start up the screen goes black for a few minutes after I enter my login password. I have Intel Quad Core 2 with 8GB Ram and TB of Hard Drive space. I just don't understand why it takes much longer to start and shut down when my laptop with less performance can.
Living is south FL can be a bitch when the rains come as there often is a ton of accompanying lightening that plays havoc with the electrical system, even though I have surge protectors inside and outside the house. We just had some very heavy rains with lightening and my computer shut down several times, but I could restart it each time...except for the last time when Windows wouldn't startup. At that point, Start Up Repair came into play. Although I routinely backup on an external drive, of course I never did it this month-DUH!Results from SUR were error free (error code=0x0) on all the parameters tested, however there were the following error codes reported:"Unspecified change to the system configuration might have caused the problem." Failed: 0x1fRepair Action: System FilesFailed: x490There were more options to select for a recovery task, but I didn't try them as they didn't seem to be as salient as the two above.
I dont know what happened to me suddenly my antivirus AVG 2012 detect an intruder on the web browser and remove the browser morzila and after that I have no restore point but i dont know what happens and I feel that my PC has something strange how I can solve this problem?
Someone read my shutdown log and told me this.shutdownProcess name="spoolsv.exe" shutdownStartTime="4908" shutdownEndTime="24938" processEndTime="-1" shutdownDuration="20029"My shutdown went from 10 seconds to 30 seconds after I installed my printer's drivers from the disc it came with. He told me to get rid of the driver and install the newer ones from the HP website, but after I uninstalled the printer and it's drivers the shutdown still dragged even when the printer wasn't installed. I went ahead and got the newest driver and the problem still remains.I tried to do a system restore to before I installed the printer, but I kept getting this error message. I tried it again in safe mode too, but to the same result. Here's the error message.can I fix the system restore or just get rid of this service so I can replace it with the newer driver's one?
I wouldn't go so far to say, I'm totally computer illiterate, but not far from it.. If there's anyone out there, who's up for a challenge I'm running windows 7. I am the administrator. Someone I don't trust at all, used my PC a while back. After he (did whatever he did) I noticed I couldn't access several files. I get a "access denied" or you don't have permission to view this file, owner info etc.. I can see a lot of the files, but their either empty now or I can't view them. I have used restore many times in the past, but now I get a message " no restore points".. I don't know what he did, or if he did anything.. It could be one of my kids changed properties by mistake, before I wised up and created a basic user acct w/ limited access for them.. I almost forgot. When I go into file properties there is a red x by my user name (administrator) Not in every property, but several.. Sometimes there is a red x by other user names, as well, but mostly mine.
I recently installed some updates in my Proline notebook, but after installing the 30 percent, it failed to restart, with the screen showing nothing (as if it's off). I then tried to restore it to an earlier time via safe mode but the restore point available is only the one as at the time of the update. I tried to create a restore point, but when i tried, i cannot even find system protection when i looked for it and it directs me to system properties where my computer's description is blank and it cannot be edited.Even the updates cannot be uninstalled via safe mode.Is there no other options i can try in order to start my laptop normally again?
I was being an idiot and messed with Msconfig memory. Restarted and gave me bsod. After that I ran Startup repair system restore failed.I checked the memory box I think it was 0, not sure. if you need additional information let me know.
I recently downloaded a damaged file, which caused my computer (not this one) to be unable to start up normally. The computer now boots up in Startup repair, which is unable to repair my computer "automatically" and when I then click "View advanced options for system recovery and support" and go to the "System restore" tab and choose a Date and time for the restoration, it tells me that "There is not enough free space to restore the disk". I seem to have no options to try and sort out the missing space on the harddisk, which should be unnecessary because I am pretty sure there is still alot of disk space on the C.
i got a hp pavillion running windows 7 i was installing the windows update and pressed restart now, after this the force restart thing came up but i pressed cancel and it didnt like this, after 2 minutes of program errors it restarted and went straight into startup repair. running it on normal mode doesnt work and safe mode is not available. when it runs startip repair it wont fix anything and tells me to restore, i can get to the windows restore part and have restore points but they do not work and an error is shown, x8000xffff if i remember correctly.
I bought Acer aspire one D270. My computer worked fine for 1,5 week. But I got blue screen at last night.I tried startup repairs and system restore. [code]
I have had this problem for quite a while. I'm able to create restore points (and they show up in the list), but I'm unable to 'restore' them... I get the system cannot restore error. I have Norton-Comcast and have deactivated 'tamper protection' with no luck.
My Sony vaio just turned off last week and wont boot up. It turns on an flashes Sony vaio but that's all. I made a recovery disk and I can get into bios so I tried booting from internal disk and tried startup repair got nothing, tried system restore for every restore point and none will finish. Took each piece of ram out an tried starting it up to see if bad ram was the problem and it starts the same way. I also tried the restore from previous image but I have no image. So I don't know what else to try. Windows 7
