Unable To Startup Repair And System Restore
Jan 15, 2012
I recently downloaded a damaged file, which caused my computer (not this one) to be unable to start up normally. The computer now boots up in Startup repair, which is unable to repair my computer "automatically" and when I then click "View advanced options for system recovery and support" and go to the "System restore" tab and choose a Date and time for the restoration, it tells me that "There is not enough free space to restore the disk". I seem to have no options to try and sort out the missing space on the harddisk, which should be unnecessary because I am pretty sure there is still alot of disk space on the C.
View 1 Replies
ADVERTISEMENT
Feb 16, 2012
i got a hp pavillion running windows 7 i was installing the windows update and pressed restart now, after this the force restart thing came up but i pressed cancel and it didnt like this, after 2 minutes of program errors it restarted and went straight into startup repair. running it on normal mode doesnt work and safe mode is not available. when it runs startip repair it wont fix anything and tells me to restore, i can get to the windows restore part and have restore points but they do not work and an error is shown, x8000xffff if i remember correctly.
View 2 Replies
View Related
Feb 15, 2013
Living is south FL can be a bitch when the rains come as there often is a ton of accompanying lightening that plays havoc with the electrical system, even though I have surge protectors inside and outside the house. We just had some very heavy rains with lightening and my computer shut down several times, but I could restart it each time...except for the last time when Windows wouldn't startup. At that point, Start Up Repair came into play. Although I routinely backup on an external drive, of course I never did it this month-DUH!Results from SUR were error free (error code=0x0) on all the parameters tested, however there were the following error codes reported:"Unspecified change to the system configuration might have caused the problem." Failed: 0x1fRepair Action: System FilesFailed: x490There were more options to select for a recovery task, but I didn't try them as they didn't seem to be as salient as the two above.
View 6 Replies
View Related
Aug 6, 2012
I was being an idiot and messed with Msconfig memory. Restarted and gave me bsod. After that I ran Startup repair system restore failed.I checked the memory box I think it was 0, not sure. if you need additional information let me know.
-What I did Messed with memory in Msconfig
-What I have access to in Startup Repair Cmd
-What I tried System restore Startup Repair
View 1 Replies
View Related
Oct 21, 2012
My Sony vaio just turned off last week and wont boot up. It turns on an flashes Sony vaio but that's all. I made a recovery disk and I can get into bios so I tried booting from internal disk and tried startup repair got nothing, tried system restore for every restore point and none will finish. Took each piece of ram out an tried starting it up to see if bad ram was the problem and it starts the same way. I also tried the restore from previous image but I have no image. So I don't know what else to try. Windows 7
View 15 Replies
View Related
Jan 14, 2011
Ever since I bought my new computer and installed Windows 7 64 bit Pro I have noticed that sometimes when I start my computer the startup locks up or crashes, requiring me to restart or it takes me to the system repair screen and running this process does nothing.
View 9 Replies
View Related
Mar 8, 2012
I am having the following system configuration
XPS L401X Base
Genuine Windows(R) 7 Home Premium 64bit (English)
Intel(R) Core(TM) i7-740QM Processor
6GB 1333MHz DDR3 SDRAM (1 x 2GB + 1 x 4GB)
640GB 7200RPM Hard Drive
Lately whenever i try to start my computer it pass the Dell Bios and then directly goes to the screen which states
Repair your system or Start windows normally When i chose repair system , it start downloading windows files and then launch the windows , but hung up at the sky blue login window with only movable cusor . When i choose to start windows normally it gives me BSOD momentarly ( hard to see the message) and then restarts again . i tried with the advanced boot up options like
repair my computer , all safe modes , restore to last good configuration but it does the same and hangs at windows loging sky blue window .I Tried to run the Dell PSA+ Diagnostic and it returns with 2000-0146 error . As per the Dell online solutions for this type of error ,I tried to reinstall the Hard disk but the problem still exist.
View 3 Replies
View Related
May 9, 2011
Win 7 no boot to windows or safe mode Startup cannot repair or System Restore Drive has changed fron C to D, PC was showing black screen 2 options Start windows normally or Launch Start up repair 1 beepthen launches startup repair.checkingsystem, then cannot repair and send info about this problem.
View 5 Replies
View Related
May 8, 2011
The other day I was trying to figure out what coral paintshop pro meant by security key, so I googled it. Something popped up and asked me if I wanted to download, and I wanted to say no, but my laptop's mouse is too sensitive at times, so I accidentally clicked yes. My computer automatically shut down right after that. Every time I turn it on now, it goes straight into System Repair and it doesn't work, it says it cannot repair. I've tried System Restore, but since that doesn't get rid of the documents that have been downloaded, it isn't helping either. My computer won't even let me enter any form of Safe Mode, it just goes straight back to System Repair.
View 3 Replies
View Related
Feb 27, 2010
How to Automatically Create A System Restore Point at Startup ?
View 0 Replies
View Related
Jun 29, 2012
My system undergoes startup repair everytime i start my computer and after a long process of searching for problems it restarts and the same startup repair problem arises. It also displays the message "This may be caused due to a recent change in any hardware or software of the system". I hv infact installed windows 2-3 times since this prblm started bt still this problem arises.
View 2 Replies
View Related
Dec 14, 2012
windows 7 startup repair on every boot but after startup repair hibernate works. How to fix?
View 1 Replies
View Related
Jan 1, 2013
I have never had the need t use this disk till now but as I am getting problems starting up I tried System Restore and it didn't work (I have tried 2 restore points).Can I use the repair disk that I created on my HP desktop to mend the system or to restore it to an earlier time ? When I open the repair disk on the computer it just shows a couple of folders (boot ,sources as well as a file called bootmgr but I can't see a hrep file to let me know what I can do...
View 1 Replies
View Related
Jan 26, 2012
Last night I closed my laptop without shutting it down. I woke up this morning and turned it on and it went to the system repair screen and ran through that. It says there are problems but they are not automatically repairable. I then tried to do the system restore to an earlier point in time and had one option for a couple days ago. I ran through that but it says there is an error and when I expand to see the error one of the things listed is no OS installed. I have windows 7 64bit. Why it would say I don't have an OS installed but it is running through the system start up repair as well as listing a date that I could restore it back to. I have not tried installing the hard drive into a new computer yet.
View 9 Replies
View Related
Jan 4, 2013
So lately my computer's firewall has decided to not work so I searched around and eventually concluded on doing a upgrade reinstall. As I didn't want to lose any of my files, drivers or programs. All seemed like it went well until the computer rebooted for the last time before it reaches the " Setting up for first use " dialog Though before this was able to happen the computer went into a reboot loop with bsod 0x0000001E
After a large amount of reluctant clicking The computer NOW only boots to the System Recovery Options window and the ONLY option is Startup Repair ; There is NO command prompt no diagnostics, nothing, Just Startup Repair, in which start up repair is unable to do anything and continues to loop itself with a Don't send dialog
I have tried inserting the installation disk and accessing the Repair Computer but it presents an incompatibility error.
I have no F8 menu at all, (no safe mode, which I can't access anyway because the computer can't set up for first use).
View 1 Replies
View Related
Jan 4, 2013
A few days ago, I went to turn on my computer and it just gave me a black screen after the "Starting Windows" screen. I attempted to use System Repair, which failed. It said there was an unspecified error possibly caused by a change in system configuration. I have not changed anything on my computer, for the record, between the last time it worked and now. My husband said it downloaded updates, which would explain why it was off in the first place instead of just being on stand-by. Anyway, I then tried System Restore, which also failed. I can get it to start in Safe Mode with Networking, but it seems that everything I try to run to figure out what the problem is, is saying it can't find the problem. I enabled bootlogging and found this...
Did not load driver @nettun.inf,%isatap.displayname%;Microsoft ISATAP Adapter
Did not load driver @nettun.inf,%isatap.displayname%;Microsoft ISATAP Adapter
Did not load driver @nettun.inf,%teredo.displayname%;Microsoft Teredo Tunneling Adapter
Did not load driver @hal.inf,%acpi_amd64.devicedesc%;ACPI x64-based PC
Did not load driver @battery.inf,%*compbatt.devicedesc%;Microsoft Composite Battery
Did not load driver @netavpna.inf,%mp-agilevpn-dispname%;WAN Miniport (IKEv2)
[code]....
View 3 Replies
View Related
Mar 23, 2010
I can create restore points. I just can't restore from them. I get this message:
System restore failed while restoring the registry from the restore point. The restore point was damaged or was deleted during the restore.
I have tried restoring in Safe Mode.I have deleted all restore points and turned off sys protection, rebooted and turned System protection back on.I have uninstalled Kaspersky (my system protection).I have made sure Volume Shadow Copy is started.
View 5 Replies
View Related
Jan 1, 2013
I have recently installed windows ultimate x64 on my computer.i have an asus p6t deluxe v2 mobo, i7-960 cpu and a wd velociraptor hdd. The install went ok, I even managed to restart my computer a few times after but after windows updates installed it won't boot. I tried to boot into safe mode, restore from the installer, and repair, none worked. After startup repair it says: "a patch is preventing the system from starting" and I get a 0x1f error code.(Preventing windows from downloading any updates didn't work either)
View 9 Replies
View Related
Jan 14, 2013
my computer says windows is starting up, then windows is shutting down.
View 1 Replies
View Related
Jan 21, 2013
I have a Samsung netbook (n145) which has had a few issues starting up over the past couple months - it would prompt to run chkdsk before booting, I would let it run, and it would boot. However, yesterday I got the 'windows failed to start - a recent hardware change may be responsible' error message, and giving the option to try starting windows normally (which fails: there is a flash of BSOD and then screen goes black, and computer restarts, arriving at same 'failed to start' error). The other option is to run system repair, which also does not work: it takes ages to bring up a dialog box that searches for errors, but I have let this run for hours and it remains stuck. Tapping f4 to bring up samsung recovery also results in a stuck screen. Tapping f8 to boot to safe mode does not work either.
My main concern is having a working computer, and I can't really afford costly repairs or a new netbook. I got this one used about 1 1/2 years ago and it has no cd drive/OS boot disk (windows 7 starter came already installed). What should I do? Can I fix the hard drive, or should I replace? I am not at all technically skilled and have limited knowledge but an endless capacity to learn. I called samsung and they suggested I replace the hard drive to the tune of $100-$300 for parts alone, which is too expensive for a $100 netbook.
View 3 Replies
View Related
Sep 27, 2012
At my school, every time you shut down the computer it wipes all user data (I believe) from the primary drive (or partition). So, every time the computer is started the primary drive/partition reverts to whatever restore point the IT department has set. I would like to do this to my personal computer, but the question is how? Is it something I can set the task scheduler to do? By doing some research I found that I can (not that I want to) create a new restore point at every start up with task scheduler, so it seems only logical that I can load a restore point of my choice at every start up without having to physically go into system restore at every start up.
I have 2x 600GB WD Velociraptors in RAID 0 configuration divided into 2 partitions. The (primary) C: contains Windows 7 Pro x64 and related files and the (secondary) G: has everything else (i.e. all of my developer tools, games, and misc files that all have a scheduled back up onto an external). I would like the C: to revert to the restore point of my choice at every start up. If it is a "simple" script to perform this task...great! But, if it requires extreme diligence (like an entire IT department to maintain)... forget it, it's not that big of a deal.
View 6 Replies
View Related
Dec 17, 2011
Well, unfortunately, I�m having the same problem of PaulyC."show more restore points dates" IS checked but it does not show anything before 16 december, TWO days ago.
View 3 Replies
View Related
Jan 20, 2012
this problem started since i used system restore.i have to reinstall something everytime i boot it!
View 3 Replies
View Related
Jan 28, 2013
I bought Acer aspire one D270. My computer worked fine for 1,5 week. But I got blue screen at last night.I tried startup repairs and system restore. [code]
View 1 Replies
View Related
Dec 3, 2011
I have just performed a full system restore on my Dell XPS L501 with Windows 7, but now it won't boot up. I get a 'Bootmgr is missing' message. I think I might have to try re-installing Windows but did not receive a disk with the PC. Anything else I should try?
View 1 Replies
View Related
Jan 18, 2013
System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD A4-3300 APU with Radeon(tm) HD Graphics, AMD64 Family 18 Model 1 Stepping 0
Processor Count: 2
RAM: 3575 Mb
Graphics Card: AMD Radeon HD 6410D, 512 Mb
Hard Drives: C: Total - 466936 MB, Free - 259482 MB; D: Total - 305242 MB, Free - 137596 MB;
Motherboard: Foxconn, A75M
Antivirus: Kaspersky Internet Security, Updated and Enabled
I recently did a Clean install of WIN 7 from scratch (after reloading the manufacturers settings), download Microsoft Updates and Kaspersky 2013. However I am unable to restore from my backup Drive (D), Win accepts the command and identifies the File/s to be restored, yet on completion the files do not appear to have been restored after a restart.
View 4 Replies
View Related
Dec 19, 2009
I currently can't make a system image or restore point. The error I receive for the system image attempt is: The backup failed. Windows Backup timed-out before the shared protection point was created. (0x80780021)
View 9 Replies
View Related
Oct 27, 2012
I am trying to rectify the error with windows update. Everytime I try to update it tells me it is checking for updates...Then "To check for updates, you must first install an update for Windows Update. Your automatic Updating settings will not change." I click Install now and get "Window could not search for new updates"An error occured while checking for new updates for your computer. Error(s) Found Code 80070643 Windows Update encountered an unknown error.
This problem first came to light a year ago when I downloaded a windows update that was corrupt.It forced the computer to loop the autocheck upon boot and could only be started in safe mode or by canelling the check.After looking through the forums I found an interim fix which disabled the autocheck and since have always recieved the message upon restarting "Autocheck program not found".I naturally thought this issue would be resovled in the next update and or a future fix.I had to go away for work at the start of this year and when I got back and windows updated it still had the autocheck message.Recently I have been unable to update at all due to the aforementioned error. The simplest soultion it would seem would be to do a system restore, this I have tried however every possible point seems to have a corrupt file on it.I ran a scan using Malwarebytes and found nothing.I don't want to format as the programs came pre installed and that would mean taking to back to the shop.
View 9 Replies
View Related
Oct 23, 2010
turns out that when i get to this window:
Instead of "Operating system: Windows 7" i get "Operating system: Unknown" and when I try to repair startup, it fails
View 3 Replies
View Related
Aug 26, 2012
As you may see I am connected to the internet but I cannot see the signal bars on the taskbar.my laptop information:Toshiba Satelite M645 S4070Windows 7 Home Premium. 64-bitI also cannot do a system restore of the check disk error i am seeing.below is an image of the results:[CODE]
View 2 Replies
View Related
May 11, 2011
I am pretty sure that a virus cause this, right before my computer shut down on it's own my anti virus popped up and said that a Trojan was found but I didn't have to do anything. Then the computer shut down and when it restartrd started to load files and then go into startup repair, only it couldn't fix it. I tried a restore, but again it said that the startup files wern't there. I just quickly scanned the diagnostic details and noticed something that said "boot critical file C:CI.dll is corrupt".
View 8 Replies
View Related
