Ever since I bought my new computer and installed Windows 7 64 bit Pro I have noticed that sometimes when I start my computer the startup locks up or crashes, requiring me to restart or it takes me to the system repair screen and running this process does nothing.
View 9 Replies
I have an acer aspire 5742 laptop. I was running windows 7. I do not have a disc as it was already loaded onto laptop that was a gift. Machine was running ok, it would overheat from time to time as i think the battery was on its way out, anyway thats not the problem. 2 days ago it switched itself off, when i tried to reboot i got a screen saying windows failed to start with options to -launch startup repair or - start windows normally. when i choose start startup repair it says in grey at bottom of screen loading windows files then it goes to a black screen and freezes. If i choose start windows normally it says starting windows and logo appears, then it just crashes.
View 2 Replies View RelatedComputer has been crashing randomly for about 3 weeks now. Typically its a problem on start up and if I keep trying it finally starts and stays stable. I have tried all the usual suspects, drivers, applications, safemode. Nothing makes any difference.
System Specs are:
Windows 7 Ultimate - (Fully Service Packed)
Student upgrade from WinXP64 (bitlocker in use on a spare drive)
Been installed less than 1 year (10mths approx)
CPU: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
RAM total: 6.00gb - 2x2gb OCZ PC2-6400 (400mhz) - Corsair 2x1gb CM2X1 PC2-6400 (400mhz)
Graphics: Radeon HD 5770 (Code name RV840)
Hard Drive: 128GB SSD - M4-CT128 M4SSD2 SCSI Disk - (2 other Samsungs Storage)
Sound: Creative SB X-FI
Firewall - Windows 7 Firewall Control
Antivirus - Microsoft Security Essentials (recently removed AVGfree)
Reports attached as required
I've been having increasing problems with my Asus g73jh. Love the performance, but been having random crashes concerning video i assumed. Updated the graphics drivers as well as ran a bios flash on the laptop. The unit always has a problem with being moved and I just moved it for the first time in around 6 months (been using it connected to my screen in living room) to bring to class and it crashed with a page fault error when I arrived at class, then again with another bsod when I got home and unpacked it.
[code]....
windows 7 startup repair on every boot but after startup repair hibernate works. How to fix?
View 1 Replies View RelatedI recently got a virus 2 days ago. It disable my possibilities from accessing any program or internet. I made a mistake by downloading a windows something ware to boot up security. It then crash...so I went to task manager didnt work, which i then went to search and entered msconfig. I then chose safe mode in minimal services. It then says loading files. U see a black screen with thite letters of the files being loaded. Then u see ur mouse cursor, and then it boots up again and same process. So I tried launch startup repair, it launches a repair, but it says it startup cannot repair this computer automactically. I then result into going to tapping f8..it goes to the screen of advanced options. Problem is if i try safe mode it will crash. I dont have a backup, and i dont want to lose my movies of over 700 gigs.
View 5 Replies View RelatedI have a Dell Inspiron and a while ago I shut down my PC and the next morning I was faced with options to repair my computer. It hung on the screen for ages before it actually came up with startup repair and supposedly fixed the problem. A few days later, everything got very slow and started to freeze a lot and before long, booting the computer got very slow as well as it hung for about ten minutes on a black screen after the 'welcome' screen before finally starting up. I decided to reinstall the operating system (I did NOT reformat the C drive), so I borrowed my Grandma's external hard drive and copied my files. After reinstalling using a Dell Windows 7 64-bit Home Premium Re-Installation DVD, I copied and deleted the files off the external hard drive onto my PC (I didn't know it would create a Windows.old folder) and started installing programs. Then I left it overnight to install quite a big program. This morning, somehow it had turned off. I turned it on and it gave me the safe mode options and a 'start windows normally' option. I chose the latter and after typing my password it hung on the welcome screen again. I left it for ages and it just went back to the user login screen again. I pressed the red button in the corner to shut it down but it just hung once again on an empty screen so I did a hard shutdown (held down the power button). I turned it on again...startup repair. It gave me the option for system restore, which I did (then realising when it finished that I hadn't made a backup). I booted it, and again it wouldn't start properly. At this time, safe mode booted fine. After trying various things (even using a compressed air can to get rid of dust) and a few hard shutdowns, suddenly every option from the advanced boot menu took me to startup repair except 'Repair your Computer' which gave the normal options for repair (although now it only gives me 2, Startup Repair and DataSafe Restore and Emergency Backup. Now when I do startup repair, some times it says it has fixed the problem, and sometimes it says it cannot be fixed automatically and gives me information on the problem (a few things it said were: 'StartupRepairOffline', 'AutoFailover' and 'CorruptRegistry').
I can't reinstall my computer because then I would lose my precious files.
Is there some way I can save my files and reinstall or even just save my files somehow or am I screwed?
Living is south FL can be a bitch when the rains come as there often is a ton of accompanying lightening that plays havoc with the electrical system, even though I have surge protectors inside and outside the house. We just had some very heavy rains with lightening and my computer shut down several times, but I could restart it each time...except for the last time when Windows wouldn't startup. At that point, Start Up Repair came into play. Although I routinely backup on an external drive, of course I never did it this month-DUH!Results from SUR were error free (error code=0x0) on all the parameters tested, however there were the following error codes reported:"Unspecified change to the system configuration might have caused the problem." Failed: 0x1fRepair Action: System FilesFailed: x490There were more options to select for a recovery task, but I didn't try them as they didn't seem to be as salient as the two above.
View 6 Replies View RelatedI was being an idiot and messed with Msconfig memory. Restarted and gave me bsod. After that I ran Startup repair system restore failed.I checked the memory box I think it was 0, not sure. if you need additional information let me know.
-What I did Messed with memory in Msconfig
-What I have access to in Startup Repair Cmd
-What I tried System restore Startup Repair
I recently downloaded a damaged file, which caused my computer (not this one) to be unable to start up normally. The computer now boots up in Startup repair, which is unable to repair my computer "automatically" and when I then click "View advanced options for system recovery and support" and go to the "System restore" tab and choose a Date and time for the restoration, it tells me that "There is not enough free space to restore the disk". I seem to have no options to try and sort out the missing space on the harddisk, which should be unnecessary because I am pretty sure there is still alot of disk space on the C.
View 1 Replies View Relatedi got a hp pavillion running windows 7 i was installing the windows update and pressed restart now, after this the force restart thing came up but i pressed cancel and it didnt like this, after 2 minutes of program errors it restarted and went straight into startup repair. running it on normal mode doesnt work and safe mode is not available. when it runs startip repair it wont fix anything and tells me to restore, i can get to the windows restore part and have restore points but they do not work and an error is shown, x8000xffff if i remember correctly.
View 2 Replies View RelatedMy system undergoes startup repair everytime i start my computer and after a long process of searching for problems it restarts and the same startup repair problem arises. It also displays the message "This may be caused due to a recent change in any hardware or software of the system". I hv infact installed windows 2-3 times since this prblm started bt still this problem arises.
View 2 Replies View RelatedI hate it when this happens and so far, the startup repair has always been able to fix the problem. Today, I'm not so lucky.
I'm using my other built right now coz I have to work. I don't remember what updates I did last night but I do remember the dvd drive firmware was updated.I popped in the system restore disc, start it up and the same page appears: Start with windows start up or Start windows normally. Tried both and neither one of them would bring up system restore. This built was only a month old and was hardly used so far so no system restore point was created at this point. I have files in it that I would like to keep but I can't get to them right now so a clean fresh install is needed but I can't get it up.
So lately my computer's firewall has decided to not work so I searched around and eventually concluded on doing a upgrade reinstall. As I didn't want to lose any of my files, drivers or programs. All seemed like it went well until the computer rebooted for the last time before it reaches the " Setting up for first use " dialog Though before this was able to happen the computer went into a reboot loop with bsod 0x0000001E
After a large amount of reluctant clicking The computer NOW only boots to the System Recovery Options window and the ONLY option is Startup Repair ; There is NO command prompt no diagnostics, nothing, Just Startup Repair, in which start up repair is unable to do anything and continues to loop itself with a Don't send dialog
I have tried inserting the installation disk and accessing the Repair Computer but it presents an incompatibility error.
I have no F8 menu at all, (no safe mode, which I can't access anyway because the computer can't set up for first use).
My Sony vaio just turned off last week and wont boot up. It turns on an flashes Sony vaio but that's all. I made a recovery disk and I can get into bios so I tried booting from internal disk and tried startup repair got nothing, tried system restore for every restore point and none will finish. Took each piece of ram out an tried starting it up to see if bad ram was the problem and it starts the same way. I also tried the restore from previous image but I have no image. So I don't know what else to try. Windows 7
View 15 Replies View Relatedthe Startup screen. So I went to the Startup repair tool as was recommended, but after few tries nothing has changed. So I tried to recover to previous recovery point, but also nothing. Then I tried booting to Safe mode, and I saw that during the loading process there was no file shown as succesfully loaded. I might also know what could be the cause of this problem, because yesterday when I was shutting Win down, there was a blackout so obviusly some files are corrupted.
View 3 Replies View RelatedWhen I go to Control PanelAll Control Panel ItemsPerformance Information and Tools and click "Rate this computer," it crashes before it's done.Desktop Window Manager Sessions Manager is disabled, not running, and the option to start it is greyed out. sfc scannow didn't finish, so I ran it at boot (url) That gave me the error "There is a system repair pending which requires reboot to complete." I rebooted into windows and then back to the disc several times and got the error each time. My computer does not have a pending.xml file. Since sfc scannow wasn't working, I tried to do a repair install (as described here: http://www.sevenforums.com/tutoria [...] ml?ltr=R). I ran the compatibility check (by clicking "upgrade" after starting setup) on the windows 7 disk and it gave me this message: "Windows needs to be restarted so necessary changes to system files can be made before continuing." Restarting, however, does not accomplish this. What can I do? It seems my main problem right now is finishing up whatever Windows thinks it needs to update on a reboot (I've rebooted many times since discovering the message.
View 2 Replies View RelatedI am pretty sure that a virus cause this, right before my computer shut down on it's own my anti virus popped up and said that a Trojan was found but I didn't have to do anything. Then the computer shut down and when it restartrd started to load files and then go into startup repair, only it couldn't fix it. I tried a restore, but again it said that the startup files wern't there. I just quickly scanned the diagnostic details and noticed something that said "boot critical file C:CI.dll is corrupt".
View 8 Replies View Relatedturns out that when i get to this window:
Instead of "Operating system: Windows 7" i get "Operating system: Unknown" and when I try to repair startup, it fails
I have a partitioned disk with windows 64 bit on one partition and windows 32 bit on another. Whenever I boot up the 32 bit partition it either goes to whitescreen straightaway, or crashes just after login in.
View 1 Replies View RelatedI cannot get my computer to restart. It tries to restart but keeps saying that startup repair cannot repair computer automatically. I try to do a system restore but it won't let me do that either
View 1 Replies View RelatedOn start up a black and white gateway screen flashes followed by a startup Repair window.This gives me a pop up that says Startup Repair cannot repair this computer automatically.There is the option of sending the information to microsoft or viewing problem details.When looking at the details, Problem Signature:Problem Event Name:StartupRepairOfflineProblem Signature 01:6.1.7600.16385Problem Signature 02:6.1.7600.16385Problem Signature 03:unknownProblem Signature 04: 21200290Problem Signature 05:AutoFailoverProblem Signature 06:11Problem Signature 07: CorruptFileOS Version:6.1.7601.2.1.0.256.1Locale ID:1033Underneath the pop up box, The startup Repair window says WIndows cannot repair this computer automaticallywith the option of viewing diagmostic repair details or viewing advanced options for system recovery and support Under the advanced options, I have tried the startup repair, the system restore, the command promptchkdsk/f/rNone of which have worked Prior to this the notebook was working fine last night, I did not install anythingI ran the Farbar Recovery Scan ToolMod Edit: Removed FRST data, this is a malware tool not permitted in this forum and you have made no indication that this is a malware situation ~ Hamluis.
View 7 Replies View RelatedStart up repair cannot repair this computer automatically , I am getting this all of the time now when starting the PC ,i am sure it started when a new video card got put in but not sure?
View 2 Replies View RelatedI have no idea what was the last thing done on this computer (it is my wifes), but I do know that every now and then there has been a disc failure, checking disc startup, but it has always had a positive outcome.[CODE]
View 4 Replies View Relatedi use ubuntu OS and windows7 professional on an HP dv5 notebook, last week i made a mistake in that i removed the battery while the machine was on as i was using windows7. the time i tried to restart it again it recommended startup repair which ran but 'could not repair it automatically' i tried the f8 options but to no avail. when i run scan and memory diagnostics all are successful but the system can still boot. am able to view my data on windows through ubuntu but ubuntu can't execute windows programs. what should i do to restore windows without loosing data?
View 5 Replies View RelatedAfter going from the E5200 Dual Core to the Q9550 Quad Core windows freezes on startup. If I try to do startup repair it crashes there too. I get the black screen of death, no error message or anything. If I re-install the E5200 it works fine. I would like the get the Quad core working. It's already been replaced once. I'd rather not have a $200 paperweight.
View 9 Replies View RelatedMy computer will boot up to the windows startup logo, and just when it should load my desktop, it flashes a blue screen, and re-boots into recovery mode.
I just built a new computer using the new Intel 1155 socket CPU. As you may or may not know, all 1155 socket motherboards were recalled due to issues with the SATA ports. Long story short, I got a refund for my H-series Biostar motherboard, and when the revised motherboards were made available, i bought a P-series Asus motherboard. All of the system hardware is the same, accept the motherboard.
The computer was running fine with the H-series Biostar motherboard, but now that i have swapped for the Asus, i seem to be running into problems. My first instinct is that the leftover H-series motherboard driver is messing with my new P-series build, but i can't get to the control panel to remove it. I have found a way to pull up windows explorer when i boot into recovery mode. Is it possible for me to remove my old motherboard drivers through windows explorer, or will i need to gain access to the control panel?
Computer Details:
CPU: Intel i5 LGA 1155
MOBO: Asus P8P67-LE
Memory: G Skill 2*2GB
Video Card: PNY GeForce 9800 GT
PSU: Tried 380W and 650W, made no difference
My wife's PC refused to reboot about a week ago and after many attempts we eventually gave up trying to recover it and reinstalled from scratch. The history of that is over here. WIN7 won't boot. What should I do before trying a clean install? The PC was rebuilt with Windows 7 64 OEM and because my system disk is only 80GB I followed the directions from this post to locate the user and user apps data folders on the other disk. User Profiles - Create and Move During Windows 7 Installation, Windows update has now installed over 150 updates including SP1 and rebooted successfully many times along the way. However this morning at powerup the PC crashed back to black and rebooted twice before successfully starting up. It has now run quite happily all day. What should I do to monitor what is happening and capture as much info as possible so that if this happens again I capture what is going wrong?
View 3 Replies View RelatedRecently bought Gigabyte GTS 450 Graphics Card. 90% of the time, I can get to the Windows login screen, but when it tries to go to the desktop, the screen goes black, my Graphics Card fans speed up until they sound like jet engines and I have to hit the reset button to get any signal. Sometimes I don't even make it that far. The funny thing is, occasionally, I will make it through to the desktop with the "Display driver stopped responding and has recovered" message, but I will get it again if I try to open Firefox. If I make it that far, I am usually stable until my computer is reset, or use any gaming software. It's been like this no matter what driver I use, the packaged driver, 275.33, or the latest 280.26. Gigabyte techs have told me to just try different drivers or send it in.. they've been absolutely worthless!
View 3 Replies View RelatedWhilst looking for a keygen for Microsoft Office 2010, I must have got a bad file.. yay. When I clicked on the app, my computer immediately went to the Startup Repair window and has been relentless. I've tried opening in SafeMode thru F8 for a system restore, no good. And attempted to start windows normally through F12.
Finally, the Startup mode is over and I'm attempting to turn it back on ... and we're right back into Startup Repair.
Usually I can resolve most issues myself but this one appears to have stumped me so I am graciously turning to you in my time of need.I am unable to boot Windows 7 on my Acer Ferrari One F0200 netbook. It has Windows 7 home premium 64-bit installed but due to an unknown problem or possibly persistent virus I have been unable to boot into windows.
below is a list of things i've tried up til now:
Tried to boot in all safe mode options (failed)
Tried to boot from last known good configuration(failed)
Tried to system restore from all available restore points (failed)
Tried multiple Startup Repairs(all failed)
"Startup Repair cannot repair this computer automatically"
Problem signature:
Problem event name: StartupRepairOffline
Problem signature 01 : 6.1.7600.16385
Problem signature 02 : 6.1.7600.16385
Problem signature 03 : unknown
[code]....
while writing this I managed to get a blue screen message(disabled the option to automatically restart on system failure) which had been flashing for a nano second previously.A problem has been detected and Windows has been shut down to prevent damage to your computer. it says to check for viruses on your computer remove any newly installed hard drives or hard drive controllers. check your hard drive to make sure it is properly configured and terminated. Run chkdsk /f to check for hard drive corruption, and then restart your computer.I had already ran the chkdsk /f before I saw this message and no files were corrupted/no bad sectors. So this is where I'm at, at my wits end hoping that I dont lose all my data.
