Windows 7 Startup Repair Fail
Aug 13, 2011
Usually I can resolve most issues myself but this one appears to have stumped me so I am graciously turning to you in my time of need.I am unable to boot Windows 7 on my Acer Ferrari One F0200 netbook. It has Windows 7 home premium 64-bit installed but due to an unknown problem or possibly persistent virus I have been unable to boot into windows.
below is a list of things i've tried up til now:
Tried to boot in all safe mode options (failed)
Tried to boot from last known good configuration(failed)
Tried to system restore from all available restore points (failed)
Tried multiple Startup Repairs(all failed)
"Startup Repair cannot repair this computer automatically"
Problem signature:
Problem event name: StartupRepairOffline
Problem signature 01 : 6.1.7600.16385
Problem signature 02 : 6.1.7600.16385
Problem signature 03 : unknown
[code]....
while writing this I managed to get a blue screen message(disabled the option to automatically restart on system failure) which had been flashing for a nano second previously.A problem has been detected and Windows has been shut down to prevent damage to your computer. it says to check for viruses on your computer remove any newly installed hard drives or hard drive controllers. check your hard drive to make sure it is properly configured and terminated. Run chkdsk /f to check for hard drive corruption, and then restart your computer.I had already ran the chkdsk /f before I saw this message and no files were corrupted/no bad sectors. So this is where I'm at, at my wits end hoping that I dont lose all my data.
View 3 Replies
ADVERTISEMENT
Dec 13, 2012
After rebooting my system, it recommended that i do a start up repair. After the repair completed i recieved the black screen right before choosing USER , so i tried 3x more to repair which each completed but same outcome till the point it just says cant repair automatically . Then i tried to system restore which failed also , but the catch is my system boots fine from Safe Mode..what to do from Safe Mode to return my boot up back to normal?
View 2 Replies
View Related
Oct 25, 2011
I recently built a new rig and I had a problem with one stick of memory. The other stick worked alright, but I've been getting random failures. Can bad memory be inconsistent? Right now, I can't start my OS up at all. It goes straight to the Windows Repair Launcher, which fails. When it gets there, I can either find a restore point or let it 'attempt to fix' for as long as I can endure. The restore point option results in 'instruction xxx failed. memory reference xxx failed.'This leads me to believe there is a problem with the memory. But, could it be the motherboard? I played a video game for hours last night, as well as surfed the web and ran other applications. Everything was fine, until I shut down. This isn't the first time this happened. Last time, I 'fixed' it by switching the 'good' memory stick with the bad. The bad resulted in getting the OS up, but lots of BSOD's
View 7 Replies
View Related
Dec 14, 2012
windows 7 startup repair on every boot but after startup repair hibernate works. How to fix?
View 1 Replies
View Related
Jul 14, 2012
i am using lenovo i3..this one is o new but its not working,says windows cannot start and tries itself to repair but i dont get any slution..
View 1 Replies
View Related
Jun 14, 2011
My friend has had this laptop for the past year or so, March 2010; and just recently her laptop decided to stop booting. Every time I try to boot windows it gives me a BSOD. All I have is the boot/repair disk from 2010; however it isn't working properly when I try to repair the OS or boot from the disk. It's a toshiba and it came with a repair program, but it also removes data on the HDD. Is there a link to a proper boot disk that I can maybe download to a flash drive and boot from there and repair? Or is there at least an easy way to pull the information off of her HDD before using the Toshiba program? Is it possible to just plug in the laptop to my computer, turn it on and access it from my personal computer? I also have an OEM version of Windows 7 from when I built my own computer, can I use that to repair her OS or will it recognize that it's not the same computer and fail? I know, lots of questions, you don't have to answer them in sequence, just tell me what would work best .
Note: She does NOT have a restore point on her laptop, I was able to get that far on my own before I decided to ask on this forum.
View 4 Replies
View Related
May 11, 2011
I am pretty sure that a virus cause this, right before my computer shut down on it's own my anti virus popped up and said that a Trojan was found but I didn't have to do anything. Then the computer shut down and when it restartrd started to load files and then go into startup repair, only it couldn't fix it. I tried a restore, but again it said that the startup files wern't there. I just quickly scanned the diagnostic details and noticed something that said "boot critical file C:CI.dll is corrupt".
View 8 Replies
View Related
Feb 21, 2013
Ran FRST64.exe as found on the forum and need assistance creating the fixlist.txt file.
View 12 Replies
View Related
Jun 18, 2012
I tried to boot in safe mode, it got stuck in mid boot. I tried to boot it with system repair, it said it was loading files and then it got stuck on a screen that said copyright Microsoft Corporation and had a green loading bar. My husband's laptop is exactly the same as mine, so I used it to create a system repair cd. I set the laptop up to boot from cd and tried it, but I got the same thing with it sticking on the green loading bar. I ran a diagnostics on my computer and everything passed except a hard drive test in which I got the error 2000-0146. I checked that error on the dell support website and it told me to take the hard drive out and plug it back in. I have not done this yet as the instructions to do so required me to disassemble the whole computer just to get at the hard drive. After some online research, I created a Knoppix (Linux based os) 6.7 boot cd and booted from the cd drive. This worked beautifully and I am now in the process of transferring all my important data from the hard drive to an external hard drive.
So here are my questions. Everything I read about error 2000-0146 says it's a hard drive failure but if that were the case, why does the hard drive seem to work fine when accessed from a Linux OS? Also, how would disconnecting and reconnecting the hard drive fix the problem? I really don't want to take it apart if I don't have too. Could the windows boot files somehow be corrupted causing it not to boot, and if so could I access them with Knoppix and replace them with good files
View 1 Replies
View Related
Jan 14, 2011
Ever since I bought my new computer and installed Windows 7 64 bit Pro I have noticed that sometimes when I start my computer the startup locks up or crashes, requiring me to restart or it takes me to the system repair screen and running this process does nothing.
View 9 Replies
View Related
Feb 18, 2012
I have a Dell Inspiron and a while ago I shut down my PC and the next morning I was faced with options to repair my computer. It hung on the screen for ages before it actually came up with startup repair and supposedly fixed the problem. A few days later, everything got very slow and started to freeze a lot and before long, booting the computer got very slow as well as it hung for about ten minutes on a black screen after the 'welcome' screen before finally starting up. I decided to reinstall the operating system (I did NOT reformat the C drive), so I borrowed my Grandma's external hard drive and copied my files. After reinstalling using a Dell Windows 7 64-bit Home Premium Re-Installation DVD, I copied and deleted the files off the external hard drive onto my PC (I didn't know it would create a Windows.old folder) and started installing programs. Then I left it overnight to install quite a big program. This morning, somehow it had turned off. I turned it on and it gave me the safe mode options and a 'start windows normally' option. I chose the latter and after typing my password it hung on the welcome screen again. I left it for ages and it just went back to the user login screen again. I pressed the red button in the corner to shut it down but it just hung once again on an empty screen so I did a hard shutdown (held down the power button). I turned it on again...startup repair. It gave me the option for system restore, which I did (then realising when it finished that I hadn't made a backup). I booted it, and again it wouldn't start properly. At this time, safe mode booted fine. After trying various things (even using a compressed air can to get rid of dust) and a few hard shutdowns, suddenly every option from the advanced boot menu took me to startup repair except 'Repair your Computer' which gave the normal options for repair (although now it only gives me 2, Startup Repair and DataSafe Restore and Emergency Backup. Now when I do startup repair, some times it says it has fixed the problem, and sometimes it says it cannot be fixed automatically and gives me information on the problem (a few things it said were: 'StartupRepairOffline', 'AutoFailover' and 'CorruptRegistry').
I can't reinstall my computer because then I would lose my precious files.
Is there some way I can save my files and reinstall or even just save my files somehow or am I screwed?
View 1 Replies
View Related
May 23, 2012
I have a Sony Vaio VGN-NW270F 15" laptop with Windows 7 (64 bit) Home Premium. 320 gb. Oh i'm also out of warranty.Computer always freezes at the point where it says "starting windows" and stays frozen. I even left it for alone for 24 hrs and it stayed on that screen.
Things I've tried:
1. I used safe mode to repair windows = just restarted in normal mode and froze at "windows is starting"
2. Used safe mode to restore to earlier point = could not to restore message
3. Created repair disc from another Vaio win 64 = froze at "windows is starting"
4. Used registry clean and malware bytes in safe mode = malware bytes found nothing & reg clean did nothing
5. Fresh install of windows 7 = windows bar loaded then froze at "windows is starting"
6. Reformatted hard drive & performed fresh install = windows bar loaded 7 froze at same point
7. Bought new Western digital 320 gb SATA Hard drive & tried install of win 7= same results
View 1 Replies
View Related
Jul 12, 2012
My laptop has been working fine for two or three months now, until today when I restarted it and suddenly could no longer use my USB mouse. Then I realized I had no WiFi signal, so I plugged into ethernet, and still had no internet connection. Most of my drivers seem to be broken, with my laptop functioning only as it would after freshly installing Windows, before actually installing any drivers.I managed to eventually find a way to install the WiFi drivers, and then the rest of the missing drivers, and restarted my computer to make sure everything was fine. The exact same thing happened again. Any idea what is wrong and how I can fix it without doing a fresh install? I don't currently have access to my backup drives so I'd lose a lot of stuff if I had to reinstall Windows.
View 2 Replies
View Related
Oct 5, 2012
I cannot get my computer to restart. It tries to restart but keeps saying that startup repair cannot repair computer automatically. I try to do a system restore but it won't let me do that either
View 1 Replies
View Related
Mar 24, 2012
On start up a black and white gateway screen flashes followed by a startup Repair window.This gives me a pop up that says Startup Repair cannot repair this computer automatically.There is the option of sending the information to microsoft or viewing problem details.When looking at the details, Problem Signature:Problem Event Name:StartupRepairOfflineProblem Signature 01:6.1.7600.16385Problem Signature 02:6.1.7600.16385Problem Signature 03:unknownProblem Signature 04: 21200290Problem Signature 05:AutoFailoverProblem Signature 06:11Problem Signature 07: CorruptFileOS Version:6.1.7601.2.1.0.256.1Locale ID:1033Underneath the pop up box, The startup Repair window says WIndows cannot repair this computer automaticallywith the option of viewing diagmostic repair details or viewing advanced options for system recovery and support Under the advanced options, I have tried the startup repair, the system restore, the command promptchkdsk/f/rNone of which have worked Prior to this the notebook was working fine last night, I did not install anythingI ran the Farbar Recovery Scan ToolMod Edit: Removed FRST data, this is a malware tool not permitted in this forum and you have made no indication that this is a malware situation ~ Hamluis.
View 7 Replies
View Related
Jul 31, 2010
Start up repair cannot repair this computer automatically , I am getting this all of the time now when starting the PC ,i am sure it started when a new video card got put in but not sure?
View 2 Replies
View Related
Mar 10, 2011
I have no idea what was the last thing done on this computer (it is my wifes), but I do know that every now and then there has been a disc failure, checking disc startup, but it has always had a positive outcome.[CODE]
View 4 Replies
View Related
Jul 24, 2012
i use ubuntu OS and windows7 professional on an HP dv5 notebook, last week i made a mistake in that i removed the battery while the machine was on as i was using windows7. the time i tried to restart it again it recommended startup repair which ran but 'could not repair it automatically' i tried the f8 options but to no avail. when i run scan and memory diagnostics all are successful but the system can still boot. am able to view my data on windows through ubuntu but ubuntu can't execute windows programs. what should i do to restore windows without loosing data?
View 5 Replies
View Related
Feb 3, 2012
I have a Toshiba Satellite C655-S5132 that just shut down & now will not boot Windows 7. Just goes to black screen w/blinking cursor then goes to 'startup repair' (which I'm postiive this is a virus of somekind) & will not allow me to do anything. Just repeats itself. I downloaded Windows 7 repair to a CD-R, chgd BIOS settings to CD/DVD to boot first, saved changes, and will NOT pull/boot up from disc. I've tried 2diff repair discs, both do not work. 'F8' does not do anything for me, not able to get to 'safe mode'. Computer is only 2yrs old.
View 9 Replies
View Related
Aug 17, 2010
I hate it when this happens and so far, the startup repair has always been able to fix the problem. Today, I'm not so lucky.
I'm using my other built right now coz I have to work. I don't remember what updates I did last night but I do remember the dvd drive firmware was updated.I popped in the system restore disc, start it up and the same page appears: Start with windows start up or Start windows normally. Tried both and neither one of them would bring up system restore. This built was only a month old and was hardly used so far so no system restore point was created at this point. I have files in it that I would like to keep but I can't get to them right now so a clean fresh install is needed but I can't get it up.
View 9 Replies
View Related
Sep 9, 2012
Over last week i had problem in my Windows7 to boot I get Over than 20minute to boot (Repair/Formate Or normal boot or in CD)despite my config :
Os : Windows Xp
CPU : Core2Duo e4600
Gpu : Nvidia Ge Force 9500GT
Ram : 2go
View 9 Replies
View Related
May 18, 2011
Whilst looking for a keygen for Microsoft Office 2010, I must have got a bad file.. yay. When I clicked on the app, my computer immediately went to the Startup Repair window and has been relentless. I've tried opening in SafeMode thru F8 for a system restore, no good. And attempted to start windows normally through F12.
Finally, the Startup mode is over and I'm attempting to turn it back on ... and we're right back into Startup Repair.
View 1 Replies
View Related
Jul 30, 2012
the Startup screen. So I went to the Startup repair tool as was recommended, but after few tries nothing has changed. So I tried to recover to previous recovery point, but also nothing. Then I tried booting to Safe mode, and I saw that during the loading process there was no file shown as succesfully loaded. I might also know what could be the cause of this problem, because yesterday when I was shutting Win down, there was a blackout so obviusly some files are corrupted.
View 3 Replies
View Related
Jun 4, 2012
I've been having trouble trying to get my computer to boot; I'd noticed a drop in performance (still unsure why) so decided to boot up in safe mode and poke around - it was not my original intention to install AC 5.3.0 but somehow it happened. I ran the 'deep-care' utility and everything was working fine, my computer rebooted and performed a disk check: there weren't any errors that I can remember apart from [something along the lines of] 60 reparse files. Following this my computer restarted and Windows failed to load, restarting to show me startup repair - this isn't the first time this has happened, a similar thing occurred following previous attempts at boosting speed, though before I was able to get Windows up and running using an Ubuntu installation disk... still don't understand why - no need to say that it didn't work this time. Startup repair refuses to work and my system restore points have vanished; I would try doing a repair install if I had a copy of the disk. I built the computer myself a few months back, borrowing a Windows 7 installation disk from a friend (who has now conveniently lost said disk), startup repair does tell me something about 'Problem Signatures'. [code]
View 2 Replies
View Related
Feb 22, 2012
I am having a problem with windows 7, when i start the computer it says loading files and then goes directly to startup repair. I cant even get into the computer in safe mode or anything else by pressing f8 when istartup. It just keeps on this startup repair loop.Its states startup repair checking for problems, it attempts repairs but then it says it cant repair this computer automatically. I have tried system restore, sytem image recovery and tried to restore the computer to its factory state. when i try that i get a error 0x4001001300001002. I didnt get any recovery disks when i bought the computer either.
View 12 Replies
View Related
Oct 17, 2012
Windows will only boot into startup repair no matter what. The issue is startup repair was unable to fix the problem. [code]
View 3 Replies
View Related
Mar 15, 2012
I have a Sony Viao with Win 7 Home Premium and I just deleted some form of Trojan with MS Security Essentials and then I ran windows updates before I restarted the machine. Windows update installed some security updates along with Service pack 1 and IE9. Now the computer will not load Windows. It goes straight to the startup repair but cannot fix the problem. There is not restore points other that when SP1 was installed and I gives an error every time I try to restore it. I can get to a command prompt and I have tried to run sfc /scannow but it tells me there is a system repair pending which requires a reboot and then does nothing. I also tried check disk(just as a last chance) but that didn't do anything.
View 2 Replies
View Related
Nov 7, 2012
I get the following on boot up Launch startup repair (recommended)start windows normally Selecting either options causes it to enter an infinite loop The last thing I did while it was working was to install a HP printer, it then said restart and since then I have not been able to get pass the Launch startup repair (recommended)start windows normally stage I have tried all the options under F8 on boot, but happy to try any suggestions as I could be completely wrong or may have overlooked something.PS I have read the threads on this forum but can not seem to get it started using the suggestions.
View 2 Replies
View Related
Oct 18, 2010
Everytime i turn my computer on it launches into startup repair (recommended) Windows laoding files Starup repair is checking your system for problems do you want to restore your computer using system restore
View 3 Replies
View Related
Jun 2, 2012
As of yesterday whenever I start the computer, it says "Windows Error Recovery - Windows failed to start. A recent hardware or software change might be the cause. If windows files have been damaged or configured incorrectly, startup repair can help diagnose and fix the problem. If power was interrupted during startup, choose start windows normally."it then gives me two choices: Launch Startup Repair (Recommended) or Start Windows Normally.When I launch startup repair im left with a black screen with no cursor. Ive tried just leaving it alone but after 5hours it stayed the same so I just gave up and just turned it off.When I start windows normally it tries to load up windows but after a few seconds Im brought back to the first screen with the same two choices.I have also tried running safe mode and last known good configuration. Both of them lead me back to the first screen with the two choices.
View 6 Replies
View Related
Jun 16, 2012
I have an Acer AX1301, and when it boots, the startup repair screen comes up.The startup repair loads files, and then, sometimes, I can select input, but then it just hangs on the blue splash screen with the bird.I have left it for up to 24 hours, but it never goes to the next step.Safe mode doesn't work, and I have tried doing the repair from a Windows 7 recovery disk. No good. The first time I used the disc, it got to the point where it was searching for Windows, but seemed to hang on that.Also, if I press Alt+F10, I can get to the Acer recovery, which has 2 options, one which will completely re-install everything and clear the drive, and another that will retain user data. If I do the user data one, what will I lose on the drive? I have my files backed up, but will I have to re-install my various programs and preferences, email settings, etc., or will all of that be retained?
View 5 Replies
View Related
