Windows Will Not Boot Even With Clean Install, Windows Repairs Fail, Repair Disc Won't Work
May 23, 2012
I have a Sony Vaio VGN-NW270F 15" laptop with Windows 7 (64 bit) Home Premium. 320 gb. Oh i'm also out of warranty.Computer always freezes at the point where it says "starting windows" and stays frozen. I even left it for alone for 24 hrs and it stayed on that screen.
Things I've tried:
1. I used safe mode to repair windows = just restarted in normal mode and froze at "windows is starting"
2. Used safe mode to restore to earlier point = could not to restore message
3. Created repair disc from another Vaio win 64 = froze at "windows is starting"
4. Used registry clean and malware bytes in safe mode = malware bytes found nothing & reg clean did nothing
5. Fresh install of windows 7 = windows bar loaded then froze at "windows is starting"
6. Reformatted hard drive & performed fresh install = windows bar loaded 7 froze at same point
7. Bought new Western digital 320 gb SATA Hard drive & tried install of win 7= same results
View 1 Replies
ADVERTISEMENT
Oct 25, 2011
I recently built a new rig and I had a problem with one stick of memory. The other stick worked alright, but I've been getting random failures. Can bad memory be inconsistent? Right now, I can't start my OS up at all. It goes straight to the Windows Repair Launcher, which fails. When it gets there, I can either find a restore point or let it 'attempt to fix' for as long as I can endure. The restore point option results in 'instruction xxx failed. memory reference xxx failed.'This leads me to believe there is a problem with the memory. But, could it be the motherboard? I played a video game for hours last night, as well as surfed the web and ran other applications. Everything was fine, until I shut down. This isn't the first time this happened. Last time, I 'fixed' it by switching the 'good' memory stick with the bad. The bad resulted in getting the OS up, but lots of BSOD's
View 7 Replies
View Related
Jun 14, 2011
My friend has had this laptop for the past year or so, March 2010; and just recently her laptop decided to stop booting. Every time I try to boot windows it gives me a BSOD. All I have is the boot/repair disk from 2010; however it isn't working properly when I try to repair the OS or boot from the disk. It's a toshiba and it came with a repair program, but it also removes data on the HDD. Is there a link to a proper boot disk that I can maybe download to a flash drive and boot from there and repair? Or is there at least an easy way to pull the information off of her HDD before using the Toshiba program? Is it possible to just plug in the laptop to my computer, turn it on and access it from my personal computer? I also have an OEM version of Windows 7 from when I built my own computer, can I use that to repair her OS or will it recognize that it's not the same computer and fail? I know, lots of questions, you don't have to answer them in sequence, just tell me what would work best .
Note: She does NOT have a restore point on her laptop, I was able to get that far on my own before I decided to ask on this forum.
View 4 Replies
View Related
Sep 20, 2010
Up until about a week ago my computer was happily running along until all of a sudden - POW! A good chunk of my games no longer launch. This happened to me back in the Windows 7 beta and it was only (partially) solved when I formatted and did a clean install of the retail version. Now that it is happening again I'm just like "screw it - format now and not waste 2 months trying to fix it.Issue seems to be: Can't update GFX drivers (Tried Driver Sweeper etc. Doesn't make a difference)Can't launch a good deal of my games (most of them the affected ones use OpenGL If I could fix that, it would save me formatting but last time I scoured the internet far and wide to try and fix it to no avail."But", you say, "just format and be done with it!"The install begins fine, it extracts all the files and gets to the first reboot. After about 3-5 mins of it progressing through the final stages of the install the screen goes blank and nothing happens (HDD and disk drive both idle even after 30 mins). Presumable its installing the graphics card driver.I had this same problem last time (From beta to retail) and I did find a solution which I can't remember exactly.I was certain it was from these forums (Which is why I'm posting here) but after a good search of these forums and the rest of the general internet I couldn't find the same instructions. Incase it rings any bells with anyone, it involved something like so:Do the first stage of the install At the first reboot enter safe mode Shift+F10 to open command prompt Open device manager and remove graphics card driver (or disable card)Reboot and continue install The only problem I ran into this time is that it wasn't loading into safe mode (it got up to loading disk.sys, the second last file it normally loads, and stops there) unless I first continue the install up to the point where where the screen goes blank, but then after I disable the card and boot normally to continue the install it says it encountered an error and makes me start it over?tl;dr: Can't update/install graphics card drivers normally or during during Windows 7 install.
View 9 Replies
View Related
Sep 9, 2012
Over last week i had problem in my Windows7 to boot I get Over than 20minute to boot (Repair/Formate Or normal boot or in CD)despite my config :
Os : Windows Xp
CPU : Core2Duo e4600
Gpu : Nvidia Ge Force 9500GT
Ram : 2go
View 9 Replies
View Related
Feb 21, 2013
Ran FRST64.exe as found on the forum and need assistance creating the fixlist.txt file.
View 12 Replies
View Related
Jun 18, 2012
I tried to boot in safe mode, it got stuck in mid boot. I tried to boot it with system repair, it said it was loading files and then it got stuck on a screen that said copyright Microsoft Corporation and had a green loading bar. My husband's laptop is exactly the same as mine, so I used it to create a system repair cd. I set the laptop up to boot from cd and tried it, but I got the same thing with it sticking on the green loading bar. I ran a diagnostics on my computer and everything passed except a hard drive test in which I got the error 2000-0146. I checked that error on the dell support website and it told me to take the hard drive out and plug it back in. I have not done this yet as the instructions to do so required me to disassemble the whole computer just to get at the hard drive. After some online research, I created a Knoppix (Linux based os) 6.7 boot cd and booted from the cd drive. This worked beautifully and I am now in the process of transferring all my important data from the hard drive to an external hard drive.
So here are my questions. Everything I read about error 2000-0146 says it's a hard drive failure but if that were the case, why does the hard drive seem to work fine when accessed from a Linux OS? Also, how would disconnecting and reconnecting the hard drive fix the problem? I really don't want to take it apart if I don't have too. Could the windows boot files somehow be corrupted causing it not to boot, and if so could I access them with Knoppix and replace them with good files
View 1 Replies
View Related
Dec 13, 2012
After rebooting my system, it recommended that i do a start up repair. After the repair completed i recieved the black screen right before choosing USER , so i tried 3x more to repair which each completed but same outcome till the point it just says cant repair automatically . Then i tried to system restore which failed also , but the catch is my system boots fine from Safe Mode..what to do from Safe Mode to return my boot up back to normal?
View 2 Replies
View Related
Feb 3, 2012
I have a Toshiba Satellite C655-S5132 that just shut down & now will not boot Windows 7. Just goes to black screen w/blinking cursor then goes to 'startup repair' (which I'm postiive this is a virus of somekind) & will not allow me to do anything. Just repeats itself. I downloaded Windows 7 repair to a CD-R, chgd BIOS settings to CD/DVD to boot first, saved changes, and will NOT pull/boot up from disc. I've tried 2diff repair discs, both do not work. 'F8' does not do anything for me, not able to get to 'safe mode'. Computer is only 2yrs old.
View 9 Replies
View Related
Jan 15, 2013
I just created a system repair disc by clicking "Create a system repair disc" on my computer. The disc was successfully created, then I went to boot it up in VirtualBox and I get a Toshiba error: F3-F100-0003. How could this be? I don't think VirtualBox or the repair disc would have anything to do with Toshiba. I created this disc with a factory preinstallation of Windows 7 on a Toshiba laptop. Did Toshiba put a custom disc image on the computer which will be burned to the disc? Does VirtualBox use the host computers BIOS? (maybe not possible because there was a Windows 7 cursor in front of the error box) Does Microsoft use Toshiba technology in their repair discs?
View 3 Replies
View Related
Jun 22, 2011
Clean install of windows 7 w/out disc? (new computer didn't come w/)? I just got a new Acer laptop and I wanted to do a clean install of Windows 7 like it did on my last laptop (I love being bloatware free!). Problem is that this laptop didn't come with a Windows disc, or any disc for that matter as I guess all the recovery info is on a HD partition. So how do I get a clean install of Windows 7?Also, I just remembered, I do have a Windows 7 disc from my old laptop. Would that work? What would I use for activation key if so?
View 1 Replies
View Related
Jun 29, 2010
I have seen a lot on clean installs but all guides are from like 2009. Is clean install still a way to install windows 7 with upgrade disc on a new hdd? since i have a hdd with vista on it and i have the licence how do i install 7 with the licence and a black hdd?
View 9 Replies
View Related
Jul 9, 2010
Well I was wanting to clean install win 7 to wipe my hard drive as it is full of junk and I plan on moving to a new pc. I was wanting to know two things -
1 - Would these method on this website [URL] work to clean install
2 - If I take my hard drive and put it in a completely new computer would I get any activation issues if I were to clean install win 7 or if I just left the hard drive as it is would it have any problems
My copy of win 7 is Home premium and I downloaded it through the UK student deal although I bought a backup disc from them.
View 9 Replies
View Related
Jun 1, 2012
I want to do a start up repair but only have a upgrade disk. When I try to do the start up repair and pick the OS on the hard drive it comes up with a error saying the os is not compatible even tho the upgrade was done from this disk. Can I do a start up repair or clean install without losing any software or personal files?This computer has no back up's.My reason for wanting to do a start up repair is yesterday when I woke up my computer from sleep mode the hard drive kept and is always accessing but the CPU was not really doing much so I had to wait and wait and waitIt will say a software is not responding then after a long wait time the file will open or a program will respond.To just open folder takes 5 min, open files 5+. re starting or starting from the off position takes about 15 min
View 1 Replies
View Related
Oct 27, 2010
I have a laptop which has been giving me a hard time lately, and I need to reinstall windows 7 (for the 4th time in 1.2 years). I have never reformatted it before and all I have is the windows 7 upgrade disk that came with it (I got it back in September when all of those free upgrade deals were going on, it originally had vista.) I read that you can have activation issues after formatting the hard drive while installing using the upgrade disc. I think Microsoft let you do it if your email them to activate it, but I'm not sure and I don't know where you would do this. Since I don't feel like formatting it, installing vista, and then reinstalling 7.
View 7 Replies
View Related
Jun 23, 2011
I did a clean install of windows 7 but now my sd and memory stick pro readers doesn't work. It's a Sony VGN-NR310E. Windows 7 Home Premium 32 Bit.
View 3 Replies
View Related
Sep 21, 2012
I've had an ongoing war with my PC for four days now. I have Windows 7 and it refuses to start up. Originally I tried starting up normal, it gave me two choices: system repair or start as normal. If I chose normal it would show the windows logo then reset. If I chose repair it would turn black for several minutes, then go to a blue screen for several minutes and wouldn't move past that. So i tried to boot from CD. I have the option of installing windows or repair. I chose repair, once again it goes to the blue screen and nothing happens (and I've left it on this blue screen a good 15 min mind you.) Finally I submitted and decided to just re-install windows. it goes to the starting setup... and sits there indefinably.
View 5 Replies
View Related
Nov 16, 2011
I couldn't find Windows 7 Repair Disc / Repair System / rewrite MBR for x64?
View 1 Replies
View Related
Jan 1, 2013
I have recently installed windows ultimate x64 on my computer.i have an asus p6t deluxe v2 mobo, i7-960 cpu and a wd velociraptor hdd. The install went ok, I even managed to restart my computer a few times after but after windows updates installed it won't boot. I tried to boot into safe mode, restore from the installer, and repair, none worked. After startup repair it says: "a patch is preventing the system from starting" and I get a 0x1f error code.(Preventing windows from downloading any updates didn't work either)
View 9 Replies
View Related
Jul 7, 2012
This is my first custom built computer. I've had the same similar problem for the past year. I have continuous problems starting up and BSOD. My computer will not start up properly at times. It also seems like this problem happens if my computer is off, not in sleep mode, for longer than 24 hours. It involves several restarts. I've checked my hard drive and memory for bad sectors and not found anything. I've run both the memtest and the windows memory test several times and found no problems.There was one post I found on a seperate site that talked about ASRock m/b having problem with Ram voltage so I've manually changed the BIOS to be the voltage required for the Ram. Seemed like it fixed it temporarily but quickly started getting more BSOD.Recently updated AMD drivers and was completely unable to get into Windows. When I restored the system to before the AMD updates I was able to get into Windows.
Some of the BSOD:Bad_Pool_Header Bug_Code Memory_Management
Below are my system specs:Processor: AMD Phenom II X4 840 3.2GHz Socket AM3 95W Quad-Core Motherboard: ASRock 890GX PRO3 AM3+ AMD 890GX RAM: 4 GB - Patriot G Series �Sector 5� Edition 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 Hard Drive: 2 TB - HITACHI Deskstar 7K2000 Graphics Card: Visiontek 900299 Radeon HD 4670 Graphic Card - 750 MHz Core - 1 GB DDR3 SDRAM - PCI Express 2.0 x16 - 1600 MHz Memory Clock - 2560 x 1600 - CrossFireX DVD Drive: ASUS 24X DVD Burner Windows 7 . . . - x86 (x64) - Professional - Full retail version - Age of system (hardware)? 1 Year - What is the age of OS installation - 1 Year (reinstalled once)
View 9 Replies
View Related
Nov 5, 2009
Is there a way (or tutorial) to create a repair disc for a multi boot Windows 7/Vista on a USB flash drive? In other words would like to be able to use a USB flash drive in an emergency to boot into a multi boot computer using Windows 7/Vista.
I see where there is a way to create a Vista/XP multi boot USB repair disc but not one for Windows 7/Vista multi boot. Evidently the boot files for Vista/XP are different from the boot files for Windows 7/Vista. I have a 4GB flash drive that I would like to use.
View 3 Replies
View Related
Aug 13, 2011
Usually I can resolve most issues myself but this one appears to have stumped me so I am graciously turning to you in my time of need.I am unable to boot Windows 7 on my Acer Ferrari One F0200 netbook. It has Windows 7 home premium 64-bit installed but due to an unknown problem or possibly persistent virus I have been unable to boot into windows.
below is a list of things i've tried up til now:
Tried to boot in all safe mode options (failed)
Tried to boot from last known good configuration(failed)
Tried to system restore from all available restore points (failed)
Tried multiple Startup Repairs(all failed)
"Startup Repair cannot repair this computer automatically"
Problem signature:
Problem event name: StartupRepairOffline
Problem signature 01 : 6.1.7600.16385
Problem signature 02 : 6.1.7600.16385
Problem signature 03 : unknown
[code]....
while writing this I managed to get a blue screen message(disabled the option to automatically restart on system failure) which had been flashing for a nano second previously.A problem has been detected and Windows has been shut down to prevent damage to your computer. it says to check for viruses on your computer remove any newly installed hard drives or hard drive controllers. check your hard drive to make sure it is properly configured and terminated. Run chkdsk /f to check for hard drive corruption, and then restart your computer.I had already ran the chkdsk /f before I saw this message and no files were corrupted/no bad sectors. So this is where I'm at, at my wits end hoping that I dont lose all my data.
View 3 Replies
View Related
Jul 14, 2012
i am using lenovo i3..this one is o new but its not working,says windows cannot start and tries itself to repair but i dont get any slution..
View 1 Replies
View Related
Dec 30, 2012
I have a hp G71-449WM Notebook running Windows7 premium 64bit. I can't boot computer the repair disc I have doesn't seem to work. I have no installation disc to fall back on and I can not seem to get it to boot in safe mode. Right now its asking me to find the needed driver in the driver folders. Unless it's called something else I do not see a bootmgr driver. Right now its asking me to connect to the network which would be cool but i don't know what folder they where asking me to type in.
View 3 Replies
View Related
Dec 31, 2011
I just performed a clean install on my new SSD and didn't enter the product key at install. However, I'm at the "preparing your computer for the first time use" screen and it won't accept my install key on my Windows 7 x64 Pro upgrade disc. I'm stuck.
View 7 Replies
View Related
Jul 6, 2012
I just got a new battery for my computer, because the old one died. When the old one died, it messed up the files on the hard drive. I used a windows xp pro installation disc to wipe the hard drive (or delete the partition), then set it as slave with another hard drive as master. Both hard drives are were wiped clean, nothing on them, and now the computer is actually running pretty fast. So, I tried to run the Windows 7 installation cd to install Windows 7 (Nyaha! Redundency!) to the new primary drive. Here's the problem. It won't boot the disc. I went to the BIOS and set it to boot the CD/ROM first, second, and last. It still won't boot the Windows 7 CD. Now, I have 3 CDs for Windows 7, my family has three different computers. I tried the 64 bit one, and the two 32 bit one's, but it will. Not. Work. It just does not boot any of them. It says "Boot Failure from Previous Device.
View 3 Replies
View Related
Apr 1, 2011
I built 2 PCs with the following spec:
CPU: Core i5 2500
MB: Asrock H61M/U3S3 (revised esata issue fixed)
RAM: 4GB GSkill Ripjaw X (2 x 2GB)
PSU: 450W Thermaltake PSU
HDD: 1TB Seagate 7200 HDD
ODD: Samsung DVD Drive
On both PCs after a successful clean Windows 7 x64 Ultimate, starts windows for the first time etc etc ask me to select windows update setting, goes into windows desktop then does a auto restart (proper logging off restart etc). At this point, after bios screen when it attempts to boot from hdd the PC just resets inself and goes back to POST, over and over again. I've tried using only one stick of ram, tried using VGA to do a clean install again instead of DVI, tried changing my RAM to a lower clock speed, every other bios setting is default. I also tried updating to the latest bios and again did a clean install (delete and create partition) even tried installing x86 instead of x64.
View 11 Replies
View Related
Sep 16, 2012
Since early August all my Security updates have been failing. It adds time to each boot up period as it goes through the updates and then at the end will say it's failed and is reverting all the changes. I have already done some research on this issue and ran "sfc/scannow" as well as "chkdsk/f/r." Both seemed to go through with no problems. After that I did a Windows update and 12 updates seemed to go through with no problem until the required reboot where we're back to the same issue of failing and reverting.
View 9 Replies
View Related
Nov 26, 2012
It's my daughter's computer. A little e-Machine, 250G HD, Windows 7 32-bit on it. Out of nowhere her computer wouldn't boot up. I can get it to try to boot using the Windows disk, it gets so far, and then the repair fails saying:
The file or directory C:/Boot is corrupt and unreadable. Please run chkdsk utility.
I try to re-install. she had backed up everything on my external just days before. It gets near the end, and then the same error comes up. I cannot get into anything else. Nothing else will load. I don't even know how I can run chkdsk. Unfortunately the computer is about three years old and she can't remember the specifics except there is only one HD in it. She had no internet at her place so it's not because she suddenly installed something. She was using it to watch movies and listen to music mostly. I'm at wits' end, can't figure it out.
View 1 Replies
View Related
May 27, 2012
Today, my HP pavilion dv7 laptop thats running on Windows 7 64 bit will not start. It was acting a little slow and then it completely froze and shut down. When i turned it on again it when to the starting windows screen and the windows logo never came and it went right into a startup repair.
View 6 Replies
View Related
Sep 18, 2010
I can't get my HP LaserJet 4 Plus parallel printer to work via USB to my new laptop with Windows 7 Premium 64 bit. My HP DeskJet 820 Cse doesn't work either.On eBay, I bought a USB to parallel printer cable adapter (Pluscom). Windows says it is working correctly, but nothing happens when connecting one of these two printers.First I tried to print with the LaserJet: nothing. Then the DeskJet: nothing. I'm even unable to edit the properties of the DeskJet: Windows tells me that the print spooler is not working (I don't receive this error message while choosing the LaserJet).A system restore to some days earlier (before I installed the printers) is also failing; Windows tells me this is because of antivirus (Avira free antivirus, up-to-date).
View 3 Replies
View Related