On both PCs after a successful clean Windows 7 x64 Ultimate, starts windows for the first time etc etc ask me to select windows update setting, goes into windows desktop then does a auto restart (proper logging off restart etc). At this point, after bios screen when it attempts to boot from hdd the PC just resets inself and goes back to POST, over and over again. I've tried using only one stick of ram, tried using VGA to do a clean install again instead of DVI, tried changing my RAM to a lower clock speed, every other bios setting is default. I also tried updating to the latest bios and again did a clean install (delete and create partition) even tried installing x86 instead of x64.
I currently running Vista Home Premium and am finally moving to Win 7I have the bootable Windows 7 install disc and certainly want to do a clean installNow I'm a bit on the anal side so I really want the install to be clean and am considering doing a wipe on the drive, then booting from teh Win 7 install cd.Is this wipe needed? Or will I get a good, clean install by simply booting to the Win 7 install cd
I recently purchased a new motherboard, RAM and SSD to upgrade my computer a bit. I planned on doing a clean install onto the new SSD, rather than upgrading Vista x64, which is installed on a 750GB hard drive. However, after I set the BIOS to boot from CD, hit a key to boot off CD, it freezes at the loading windows screen before you can select your language preferences. I tried running this with only 1 4GB memory stick instead of 2.
Also, unplugged everything that wasn't needed from the computer, leaving just the video and ps/2 mouse + keyboard. I also tried, taking out the PCI Sound card, starting with just the SSD drive connected and the 750GB drive disconnected and disabling everything I could think of that wasn't needed in the BIOS. I tried both the 64bit (which I would like to use) and the 32bit install CDs. Both freeze at the same spot.
so i custom/clean installed windows 7 ultimate from usb, formatted through the windows installer, and deleted all pervious partitions. i then installed windows.windows created two partitiions one primary and one "for backup drivers" a total of 100mb. for some reason though it still shows me all my previous programs?like microsoft office 2007, wich actually is disabling my office 2010.hat i want to do is totally clear the hard drive so that i really only have windows 7 ultimate on it. similiar i guess to task 29ing my old htc touch pro
Is it possible to do a clean install with upgrade version of home premium or ultimate? Meaning format everything first and then use the Windows 7 upgrade dvd to install it from scratch?
I was running Windows 7 ultimate x64 on my system (specs below), and I usually let my computer go into hibernate as it does that automatically after some time of system inactivity. Usually it will boot back up with no problem but then last week I tried to boot it up, it crashed and said system error.. I can't remember everything it said as it was obviously coded; since then I haven't been able to bring up the same warning screens.
Instead what happened was I reinstalled windows 7 on the same drive, formatted and all, and after installation it would finalize my settings, etc. After which, it would do a final reboot and, after bios goes, the computer hangs on a command prompt type screen with just a flashing underscore. Asking my family members, they proposed it might be a hardware issue so I bought a new hard drive (Seagate Barracuda 1tb.. not sure if that matters) and tried installing windows on that drive; same exact problem.
I also tried different combinations of RAM with my board, including just one stick of RAM, tried taking out the video card, tried taking out the sound card, etc. No dice. So my dad took his drive from his computer, that has an install of VISTA x64, and I plugged it into my computer and it worked perfectly. Conversely, I plugged my drive with the Windows 7 install into his computer and it also worked perfectly. We tried playing around with a few settings in the BIOS, etc. but nothing gives.
SPECS: MOBO: Intel DP45SG Chip: Q6600 Ram: Hynix 2x2gb and 2x1gb kingston Vid card: Zotac GeForce GT 610 Sound: Creative X-Fi Xtremegamer BIOS: Should be up-to-date, irregardless it ran Windows 7 before
I did a clean install of Windows 7 Ultimate onto my Vista Ultimate Boot Camp Partition (on my MacBook Pro), rather than an upgrade install.
Windows 7 told me that it would move Vista to a folder called Windows.old or something like that.
Fine. After everything was installed, I used Disk Cleanup to delete that folder, and the space was recovered on my partition
But when booting into Windows 7, I get a boot menu that seems to indicate Vista is still there.
So my question is, can I simply delete Entry 2? Or is there other remaining stuff from Vista still on my drive somewhere that I should also delete? What is the drive "Active Boot Partition"?
I wish Windows 7 gave an option to do a clean install WITHOUT keeping the old system around...The whole point of doing the clean install was to get rid of all the accumulated junk and start fresh.
The laptop was running slow and I decided it was time to clean things up and get her running like new again. Backed up everything and wiped the drive using KillDisk.Three and a half hours later when the process was done I popped in my Wndows 7 OEM disc only to be greeted with the dreaded Unmountable Boot Volume on that pretty blue screen . Tried several times but it's the same thing each time.
Ok so after years of running XP, I finally got an external HDD to back all my crap on and Windows 7 Ultimate. I backed up all my stuff, ran the win7 DVD through start up, reformated my hard drive, installed windows 7.
It installed fine, rebooted a couple of times through the install, finishes, and logs me to the desktop. Its all working fine, I can use the net etc. I shut it down to restart it, and it doesn't start back up. It gets to the bios window where it decides to start off the dvd or hdd, just prior to where it should normally change to the 'windows is loading' screen, and just sits there, blinking and doing nothing.
I've done three installs, I took out the hard drive, reformated it with another computer, made sure it had a ntfs file system, everything, it's working fine. But every single time I install windows 7, It logs me into the desktop for the first time, I can do everything fine, but then if I Shutdown or restart, it hangs on the screen prior to windows loading. I can't even choose a boot option.
I've seen some ideas on other forums, pulling the power out, resetting the bios/cmos, changing boot sequence, unplugging all non-essential hardware.. nothing. It's like as soon as I install windows 7 my hard drive isn't there anymore.
Specs: Abit AX78 - Latest BIOS version AMD 9950 quad core 2.6 4GB DDR2-800 ATi HD 5870 Western Digital 500GB
I have a Sony Vaio VGN-NW270F 15" laptop with Windows 7 (64 bit) Home Premium. 320 gb. Oh i'm also out of warranty.Computer always freezes at the point where it says "starting windows" and stays frozen. I even left it for alone for 24 hrs and it stayed on that screen.
Things I've tried:
1. I used safe mode to repair windows = just restarted in normal mode and froze at "windows is starting"
2. Used safe mode to restore to earlier point = could not to restore message
3. Created repair disc from another Vaio win 64 = froze at "windows is starting"
4. Used registry clean and malware bytes in safe mode = malware bytes found nothing & reg clean did nothing
5. Fresh install of windows 7 = windows bar loaded then froze at "windows is starting"
6. Reformatted hard drive & performed fresh install = windows bar loaded 7 froze at same point
7. Bought new Western digital 320 gb SATA Hard drive & tried install of win 7= same results
I'm going to make a clean install of windows 7 and therefor have some question
1)As I want to make a dual boot install with a Linux distribution I thinking about the Partitioning. I want to make following Partitions: [code] Windows 7 also always creates this small 100MB system restore partition. So what would be the best way to prepare these Partions. I would use GParted Live CD to create the Partition in advance, that everything is the way I like it. But I'm not sure if this works without problems for the 100 MB system restore partition (lasts time I got 2 100 MB partitions)
2) I want to move the Users data to a separate partition and found this guides: User Profiles - Create and Move During Windows 7 Installation [2]=User%20Accounts User Folders - Change Default Location(Don't know which one I chose to do so till now) But I see in Windows 7 there are much more useless directories in the users home directory:I've already learned the new Library system, but I still want to use the Users directory. But there is a great mess. Is there a useful/possible way to prevent the directory to mess up with all the sub directories, often created by some apps, don't really using the directory. Or are you just ignore the users home directory? Usually I got about 5 to 8 sub-directories in each Directory for a tidy system to find everything and have a good ordered system.
I get to the point where it asks where to install windows but the drive does not appear. it is a new Seagate 80Gb 7200rpm IDE hard drive (ST380013A). It is formated to NTFS. My question (besides why is it not recognized) is do i need to format it to FAT32 to install a 64 bit Windows 7 Ultimate OS?
I got windows 7 ultimate 32bit free from my school, and decided that I wanted to clean install, and not upgrade it. I transferred all my files off, booted the laptop up with the windows 7 disk, and proceeded to clean install. I didn't have the drivers cd for my laptop, but I just wiped my drive and installed 7 anyway. Now I have windows 7 ultimate 32bit, and can only use 3 of my 4 gigabytes of memory.. The thing I don't really understand is the whole upgrading option, and like, I know that it's a windows 7 32bit dvd, but it doesn't seem right to go from 64bit to 32bit. So is there anyway I can make it 64bit without having to buy a new dvd? And if not, how much am I missing out on, with not having 64bit, especially with having 4 gigabytes of ram?
I'm working on a re-install of all components following a complete corruption of the boot sector on my drive which could not be fixed with repairs. The last time I installed everything fresh, I had no issues. Between then and now, there have been no hardware changes on my system, but now I am having issues installing the IDT Codecs. I keep getting an error along the following lines: Quote: ExitError: Error=Device Object not present, restart the system and run setup again. Running under compatibility mode, and running drivers from both the motherboard CD and the manufacturer website both have the same effect. The CD, when booted, says "This OS not support!" and only contains 32-bit vista codecs. ECS' website download indicates the IDT drivers as being compatible with Windows 7. Both do not work. It is almost as if the hardware "disappeared," despite the fact that I was using the drivers quite successfully till just 2 days ago, when the boot sector went kaput.
Windows has installed its own default set, which do nothing to power the 8mm jacks which I use with my speakers, but instead put sound through the HDMI, which is useless because I use a dedicated graphics card. I have tried uninstalling this codec and re-installing IDT, to no effect. Windows replaces with its own default codec.I have referenced this thread here, but offered solutions do not seem to work for me: Intel IDT Audio Driver will not install
Does anyone know whether there is a difference in performance between doing a clean install of Windows 7 vs upgrading Vista? Any better stability? I'm just wondering whether it's worth the trouble of the clean install.
I have seen a lot on clean installs but all guides are from like 2009. Is clean install still a way to install windows 7 with upgrade disc on a new hdd? since i have a hdd with vista on it and i have the licence how do i install 7 with the licence and a black hdd?
I'm an IT student who got a free Win 7 x64 disk from my school, and I am unable to do a clean install. My system specs are as follows:
Intel Core 2 Duo 3.12 Ghz nVidia GeForce 9800 GTX 512 MB PCI-e 320 GB Western Digital HD SATA 1 Gb DDR2 1066 MHz and 2x2Gb DDR2 1066 MHz SDRAM
I set my boot sequence to boot from DVD-ROM drive first, and HD second. It goes to the "Windows is loading files" screen and gets hung up. I started the process and went to watch TV for an hour, and it is still on the "Windows is loading files" screen. I haven't gotten any error messages. I've unplugged all USB devices from my computer as I have seen on this forum that it has worked for some people.
edited to add: I originally had only 2 Gb of RAM, and it got hung up at the "Windows is loading files" screen. I thought it was getting hung up because I didn't have enough RAM, so I bought brand new 2 sticks of 2 Gb RAM. I took out one of the 1 Gb sticks and placed both of the 2 Gb of RAM...for a total of 5 Gigs. And, it is still doing the same thing.
After formatting and setting a new partition using the installation disk, I install Windows 7, all goes well. But as soon as the installation is finished and my laptop restarts, it wont boot from the HDD. I keep getting error messages saying:
Windows Boot Manager
Windows failed to start.... File: ootBCD Status: 0xc000000e
[Code].....
A copy of the current boot configuration data will be saved as c:ootcd.backup.0001
However when i hit the "ok go ahead and fix it then!"-button i get another error saying Startup Repair cant save the new boot options. Anyone know if i can fix this problem with BCDedit or bootrec.exe
i've had enough of 7, I use my PC for music and after months of installing/uninstalling/re installing/researching/driver checking etc. i've decided i'm just not going to get things working with 7.
I have my XP disc and i'm ready to do a clean install, but i'm struggling to get it going... what do I do!? Inserting the XP disc brings up the autopay but the option to install is greyed out, which I understand as it's a step down. However, when I press f12 on booting to try to boot my pc from disc it just locks on the boot menu. What can I do to get a clean install of XP going?
I have been having numerous problems over the past wk. The firewall won't stay on, can't do windows updates etc. I have run Vipre as my anti virus and also mbam and superantispyware and everything is coming back clean. Today I decided to just backup my documents etc and then do a clean install. Now the problem is that the DVD burner doesn't show up in the BIOS. It shows up in my computer and it's running fine. If I format it out of the computer can I get windows to install from that DVD drive?
I didn't notice until I tried 2 burns. Then I resorted to downloading elsewhere and after 3 more downloads I got the right file(verified by hash) for 64 bit Windows Pro English. Burned the iso to my thumb drive fine, seemed to install fine and fast on this system: [code] Have 2 500GB spinpoint F3s in raid 0 and 1(setup in bios correctly and in raid menu bios fine)190GB raid 0, 375GB raid 1 using Intel raid after mostly done with install it said it had to restart so it did, but since I used a USB thumb drive it tried booting from that again instead of finishing install. I redid the install after fixing partitions and it seemed to go fine this time I removed the drive when it restarted. I was actually finally in windows 7!After installing a couple drivers I needed I restarted then things went bad.Could no longer enter windows normally because once it loaded the screen went blank.It automatically installed gfx drivers but the monitor drivers aren't installed and I was incapable of installing them after 1-2 hours trying to figure out a way. Monitor didn't show up in device manager.Monitor is an Acer2051w.I could get into safemode and try to mess with stuff.I was able to uninstall video drivers then boot into windows normally but it would automatically install the same driver and I wouldn't be able to get back in again. Automatic driver installation was off by the way.
So I couldn't fix this so I decided to reinstall Windows 7. The install went through fine, said it had to restart to finish up and after restarting the screen would stay blank forever. Doesn't seem to be installing properly now.So I can't get it installed again, and when it was it wasn't working properly. I have the monitor drivers even but no way of installing them so Windows is screwing up setting a bad resolution/ settings for the display that I can't fix hence the blank screen issue.
I have a retail Upgrade DVD for Windows 7 Home Premium which I purchased. I did a clean install by wiping my hard drive using the format partition option on the Windows 7 DVD. I had Vista installed on the HDD before the upgrade so the installation program could "SEE" that I had a qualifying version of Windows to validate the upgrade key.Activation was successful.Now, I want to start a clean slate. However, I don't have Vista installed anymore, just Windows 7.Can I reinstall with an upgrade key on a blank, reformatted hard drive? Will activation pass?Or do I need to reformat with the installation program on the DVD?Finally, I made an image of my Vista operating system before I upgraded, do I need to restore the image so my Win 7 DVD can once again "SEE" the qualifying Windows version?There are forums out there that say different things, yes you can, no you can't, well it depends.
I have a new, 120gb solid state drive I want to install windows 7 pro, 64-bit on. Does windows 7 take care of whatever formatting is needed automatically? Does it let me pick allocation size and type of formatting (e.g. NTSF versus another type)?
I recently had my system crash after a bad update for my graphics card and I've tried to re-install windows a number of times and have had no luck.I have tried a few of the tutorials here and formatted my HDD to try for a new clean install. I get through the first part of the install, but once my PC reboots it keeps trying to load from the disk and then I get into windows boot manager. I try to select the start windows normally option and then I get an error message saying 'Windows failed to load because the system registry file is missing or corrupt'.I have the original windows X64 product disk.
I am about to migrate over to Windows 7 Pro this week, just waiting for a new video card. I have XP Pro (Sp3) now. I will be using a Win 7 Pro upgrade disk. I want to start with a fresh formatted HD, I will being using a second hd (D) with XP PRO installed, will I be able to use C, or must it be installed on the same HD partition(D)? I seem to recall something about having to be on the same partition.
I am preparing to do a clean install on my HP laptop, as the HP Windows 7 (that came from the factory) is bloated and messed up...So, I have backed up everything and am ready to insert the retail disk and install Windows 7. I am going to use the COA key on the bottom of the laptop. Using this key, during the installation menu, will it work fine and accept it? Will I have to call Microsoft
