I have an older Toshiba Tecra A5 notebook which does not have a built-in DVD drive, nor do I have an external DVD drive. BIOS does not support USB boot, but does have a PXE boot option.My desktop is an older Dell model with a working DVD, but no wireless capabilities. Both computers are running activated Win 7 Ultimate X86 and are connected through a wireless access point..Linksys WRT54Gv8: running firmware is micro dd-wrt. Both IP's are dynamic, but almost never change.Objective is to use Ultimate boot CD to completely wipe and re-partion the Tecra via the desktop, where Ultimate boot is located. Unable to employ ADHOC, desktop is not wireless, cannot afford to buy anything new, and I also enjoy a good challenge.I am looking for the most basic method, without using homegroup nonsense etc.
I want to do a start up repair but only have a upgrade disk. When I try to do the start up repair and pick the OS on the hard drive it comes up with a error saying the os is not compatible even tho the upgrade was done from this disk. Can I do a start up repair or clean install without losing any software or personal files?This computer has no back up's.My reason for wanting to do a start up repair is yesterday when I woke up my computer from sleep mode the hard drive kept and is always accessing but the CPU was not really doing much so I had to wait and wait and waitIt will say a software is not responding then after a long wait time the file will open or a program will respond.To just open folder takes 5 min, open files 5+. re starting or starting from the off position takes about 15 min
My computer was having some problems every time I booted it up. Upon start up, I would receive an error message saying "windows failed to start, a recent hardware or software change might have caused the problem" and would give me some options to pick from like Safe Mode options and Start Normally. I would click "start windows normally" and my computer would boot up normally and run just fine. But every time I turn my computer off, I come back the next day with the same error message. I tried running the windows repair option but it would never find anything.
I decided I would just perform a clean install and just be done with it, but after doing that, I tried booting my computer to have the SAME error message. Same thing happens, I just click start normally and it works fine. It's just a total hassle to have to deal with this error message every time I try turning my computer on. Since I performed the clean install, I have very little things re installed to the computer like Java and what not. I wouldn't think it would be Java because I have had that the entire time I have owned the computer and only recently got the error messages.
After a new (clean) install of Windows 7, the start menu is empty - all installed programs and other items usually posted by the installer are missing. Is there a fix (not a workaround) for this problem? There have been a lot of postings for this issue over time throughout the Internet, but I cannot find a real fix (like a patch from Microsoft) for this problem. When I install Windows 7 with a newer release of Windows 7, the start menu is populated as expected, so I can only infer that Microsoft knew about and fixed the problem in later releases, but did not post a fix. Unfortunately, I have a couple of systems that have recently been built with an earlier release of Windows 7, and subsequently, have the problem.
how do I do a clean install of 64 bit windows 7 replacing 32 bit windows 7? I purchased a separate 64 bit disk. Before the Windows 7 32 bit, it was vista 64 bit, so the system is a 64 bit system. I just need to know how to get it going. When I insert the 64 bit disk, all it says is that it is incompatible. So what do I do?
So I had finally got my first build ever running a few hours ago. Was so excited. I used the program wintoflash to copy my windows installation cd to my flash drive. Popped the flash drive in my new rig and booted it up. It went to installation and took a bit of time to completely install. As it restarted after install the windows startup came up and was continuously going for quite some time and never stopped. So where I am at is that I cant get past the start up screen.
I have tried so much. I pulled out the second stick of ram, the gpu.. ran memory check with no errors, tried re installing windows in many ways (different partitions).I tried running in safe mode but it just gets stuck at disk. The only thing I knoticed is that windows 7 installs faster the second time around, even after deleting all the memory on the hard drive (advanced option during install). I have browsed the web and nothing has helped. Just got a new mobo after replacing the last defected one today, so that cannot be the problem. Completely and utterly frustrated to be presented with another speedbump after all this hard work to get it running.
My rig: Intel i-5 3rd gen. Kingston hyperx 2x8gb AsRock b75m-dgs motherboard. nvidia gt 440 Western Digital Caviar 250gb 7200.
When I try to do a clean install of Windows 7 I get the loading files white progress bar you normally get during an installation, it then goes directly to the scrolling progress bar that would normally appear before a Windows startup, and then goes to a blank Windows 7 desktop with only a cursor (that I can move).I have a computer with the following specs:[CODE]I have tried to install with every version I can get my hands on, both 32 and 64 bit. None of them are upgrade versions. I've tried installing on a fresh WD Raptor and an Intel G25 SSD. All other drives have been disconnected. I've moved my memory around and tried with one stick. My mainboard has the latest official BIOS, although there is a new beta.
I ran the Windows 7 compatibility test and didn't see anything that would cause this problem.I have searched the internet and have not been able to find a solution sonstalling Windows XP has never been a problem, just Windows 7, always with the same problem.This is one of the few times when I have not been able to look around a find an existing answer to a problem and I am stumped.
On both PCs after a successful clean Windows 7 x64 Ultimate, starts windows for the first time etc etc ask me to select windows update setting, goes into windows desktop then does a auto restart (proper logging off restart etc). At this point, after bios screen when it attempts to boot from hdd the PC just resets inself and goes back to POST, over and over again. I've tried using only one stick of ram, tried using VGA to do a clean install again instead of DVI, tried changing my RAM to a lower clock speed, every other bios setting is default. I also tried updating to the latest bios and again did a clean install (delete and create partition) even tried installing x86 instead of x64.
I did a clean install of Windows 7 Ultimate onto my Vista Ultimate Boot Camp Partition (on my MacBook Pro), rather than an upgrade install.
Windows 7 told me that it would move Vista to a folder called Windows.old or something like that.
Fine. After everything was installed, I used Disk Cleanup to delete that folder, and the space was recovered on my partition
But when booting into Windows 7, I get a boot menu that seems to indicate Vista is still there.
So my question is, can I simply delete Entry 2? Or is there other remaining stuff from Vista still on my drive somewhere that I should also delete? What is the drive "Active Boot Partition"?
I wish Windows 7 gave an option to do a clean install WITHOUT keeping the old system around...The whole point of doing the clean install was to get rid of all the accumulated junk and start fresh.
The laptop was running slow and I decided it was time to clean things up and get her running like new again. Backed up everything and wiped the drive using KillDisk.Three and a half hours later when the process was done I popped in my Wndows 7 OEM disc only to be greeted with the dreaded Unmountable Boot Volume on that pretty blue screen . Tried several times but it's the same thing each time.
I'm going to make a clean install of windows 7 and therefor have some question
1)As I want to make a dual boot install with a Linux distribution I thinking about the Partitioning. I want to make following Partitions: [code] Windows 7 also always creates this small 100MB system restore partition. So what would be the best way to prepare these Partions. I would use GParted Live CD to create the Partition in advance, that everything is the way I like it. But I'm not sure if this works without problems for the 100 MB system restore partition (lasts time I got 2 100 MB partitions)
2) I want to move the Users data to a separate partition and found this guides: User Profiles - Create and Move During Windows 7 Installation [2]=User%20Accounts User Folders - Change Default Location(Don't know which one I chose to do so till now) But I see in Windows 7 there are much more useless directories in the users home directory:I've already learned the new Library system, but I still want to use the Users directory. But there is a great mess. Is there a useful/possible way to prevent the directory to mess up with all the sub directories, often created by some apps, don't really using the directory. Or are you just ignore the users home directory? Usually I got about 5 to 8 sub-directories in each Directory for a tidy system to find everything and have a good ordered system.
I have a Sony Vaio VGN-NW270F 15" laptop with Windows 7 (64 bit) Home Premium. 320 gb. Oh i'm also out of warranty.Computer always freezes at the point where it says "starting windows" and stays frozen. I even left it for alone for 24 hrs and it stayed on that screen.
Things I've tried:
1. I used safe mode to repair windows = just restarted in normal mode and froze at "windows is starting"
2. Used safe mode to restore to earlier point = could not to restore message
3. Created repair disc from another Vaio win 64 = froze at "windows is starting"
4. Used registry clean and malware bytes in safe mode = malware bytes found nothing & reg clean did nothing
5. Fresh install of windows 7 = windows bar loaded then froze at "windows is starting"
6. Reformatted hard drive & performed fresh install = windows bar loaded 7 froze at same point
7. Bought new Western digital 320 gb SATA Hard drive & tried install of win 7= same results
I need to know what I can use to make sure dust gets out/doesn't get into my computer. I've heard canned air, which I remember using for my old VCR few years ago, but I remember it didn't do so well which is why I'm cautious over using thata agin for my desktop.P.S. after a while of usage upon turning it on, give or take 3-4 hours in, I think I'm hearing the fan sound in a unusually way, but not in a good way, more like an okay/cautious way. It'll build up, after a while it'll go down. Hard to explain.
i tried many time to reformat, then re-install win 7, pc re-started and stopped at the black screen with mouse cursor, i have tried F8 and start up repair, nothing helps.
Is there a way to get clean windows (folders) on the desktop, without all the navigation bars and icons? For about two decades, I've organized my Windows desktop with a handful of folders containing links to the most-used programs - sort of an always-up start menu. The folders are in Startup so they open on boot.Even with the navigation stuff on the left closed, the Windows 7 folders have too much stuff on the top and bottom.
Is there a way to get something that looks more like the classic Windows folder? They don't have to be consistent with the other folders, but they do have to be there all the time.
my laptop got totally affected by different malwares,trojans..etc. So i used avira to scan my system and removed all the viruses it showed...but after rebooting a black desktop appeared with only cursor present and no icons n no wallpapers....cursor only moves no right-click..i did some searching on how to get my desktop screen back...n i tried Ctrl-Alt-Del..then new task n typing explorer.exe....an error mssg shows up saying u dont have permission..
tell me if a re-install from a system image file on my notebook is as good as a clean install from say a retail disk.I can not format all my drive and start a fresh. Can my System image file become glitchy or infected with a virus.?
I'm working on a re-install of all components following a complete corruption of the boot sector on my drive which could not be fixed with repairs. The last time I installed everything fresh, I had no issues. Between then and now, there have been no hardware changes on my system, but now I am having issues installing the IDT Codecs. I keep getting an error along the following lines: Quote: ExitError: Error=Device Object not present, restart the system and run setup again. Running under compatibility mode, and running drivers from both the motherboard CD and the manufacturer website both have the same effect. The CD, when booted, says "This OS not support!" and only contains 32-bit vista codecs. ECS' website download indicates the IDT drivers as being compatible with Windows 7. Both do not work. It is almost as if the hardware "disappeared," despite the fact that I was using the drivers quite successfully till just 2 days ago, when the boot sector went kaput.
Windows has installed its own default set, which do nothing to power the 8mm jacks which I use with my speakers, but instead put sound through the HDMI, which is useless because I use a dedicated graphics card. I have tried uninstalling this codec and re-installing IDT, to no effect. Windows replaces with its own default codec.I have referenced this thread here, but offered solutions do not seem to work for me: Intel IDT Audio Driver will not install
Does anyone know whether there is a difference in performance between doing a clean install of Windows 7 vs upgrading Vista? Any better stability? I'm just wondering whether it's worth the trouble of the clean install.
I have seen a lot on clean installs but all guides are from like 2009. Is clean install still a way to install windows 7 with upgrade disc on a new hdd? since i have a hdd with vista on it and i have the licence how do i install 7 with the licence and a black hdd?
So ive been getting the black screen with movable cursor lately and have tried many a methods to remove it i tried checking in my event log for something, and this is waht it said "The following boot-start or system-start driver(s) failed to load:dtsoftbus01" So what does this mean and how can i fix this?
Monday couldn't boot up PC, had to go to system recovery and restore to previous day.
Log files show below that 4 things failed to load. Tuesday couldn't boot up PC again.. tried to restart like 4-5 times.. Finally comes up and in the logs there's numerous things that failed to load. Running a sfc /scannow right now.
I found corrupted system files, but it appears that the hard disk is fine. executed chkdsk and no bad sectors.Just looked into this on event viewer-The following boot-start or system-start driver(s) failed to load:xsoaynmfmfxpefxbozedltnzvijcvI am running Acer Aspire X3950-U3022 with Windows 7 Home Premium Home Edition.
I'm not sure where to even begin to fix these problems. Some online searches suggested doing a system repair but I want to get some more feedback here before proceeding.Here is the message from the event log:The following boot-start or system-start driver(s) failed to load:
AFD cmdGuard cmdHlp CSC DfsC discache ElbyCDIO
[code]...
I realized some of these are not Windows 7 related but most are. While the computer "works", I do experience frequent reboots and freezes. Perhaps some of these driver loading failures are part of the cause of my issues.
I originally did the upgrade install of Windows 7 from Vista to Windows 7. I am seeing that I now am running "ChkDsc" every time that my computer is shut down. I was told that I would be better off to do a clean install and reinstall programs and files. Can I do a clean install with my upgrade disc, or will I be creating additional problems ?
I'm an IT student who got a free Win 7 x64 disk from my school, and I am unable to do a clean install. My system specs are as follows:
Intel Core 2 Duo 3.12 Ghz nVidia GeForce 9800 GTX 512 MB PCI-e 320 GB Western Digital HD SATA 1 Gb DDR2 1066 MHz and 2x2Gb DDR2 1066 MHz SDRAM
I set my boot sequence to boot from DVD-ROM drive first, and HD second. It goes to the "Windows is loading files" screen and gets hung up. I started the process and went to watch TV for an hour, and it is still on the "Windows is loading files" screen. I haven't gotten any error messages. I've unplugged all USB devices from my computer as I have seen on this forum that it has worked for some people.
edited to add: I originally had only 2 Gb of RAM, and it got hung up at the "Windows is loading files" screen. I thought it was getting hung up because I didn't have enough RAM, so I bought brand new 2 sticks of 2 Gb RAM. I took out one of the 1 Gb sticks and placed both of the 2 Gb of RAM...for a total of 5 Gigs. And, it is still doing the same thing.
I'm finding this decision quite hard to decide on and can't decide what to do. I am very picky about wasted space or unnecessary stuff on my hard drive, yet I'd rather not install everything all over again which will take about 20 hours or so.
My question is...if I do an upgrade-install, can I just delete everything in the Windows.old folder and have everything practically the same as a clean install? Or will there be still be some left over things from the hundreds of programs I've installed and uninstalled?
Edit: I've ran the Windows 7 Upgrade Advisor and everything seems ok.
