Start A Clean Install Of Windows 64bit Over 32bit
Apr 13, 2012
how do I do a clean install of 64 bit windows 7 replacing 32 bit windows 7? I purchased a separate 64 bit disk. Before the Windows 7 32 bit, it was vista 64 bit, so the system is a 64 bit system. I just need to know how to get it going. When I insert the 64 bit disk, all it says is that it is incompatible. So what do I do?
View 3 Replies
ADVERTISEMENT
Jun 26, 2009
I just preorded the windows 7 upgrade and I'm wondering, is it possible for me to "upgrade" (Clean install) my windows xp 32 bit to 64bit windows 7? I've read the windows 7 FAQ and it said of your upgrading from XP, a clean install is required to upgrade but does the upgrade offer allow for xp 32bit to be upgraded to w7 64bit?
View 9 Replies
View Related
May 11, 2011
I have a computer running a 32 bit oem version of windows 7 home. I really need to change this to a 64 bit version. I do not want to do this illegally. Can I buy this upgrade copy of 7 professional, perform a clean install of windows prof. 64 bit with the upgrade disc, and then use my current oem 32 bit home disc and or license key, to validate that i do in fact have a copy of windows currently.
So technically I wont be "Upgrading" from 32 to 64, I will be re-installing. I have asked several tech savy friends, and while they don't think it cant work, they are unsure. Essentially I am asking if anyone knows what validation windows requires for its upgrade discs. I am given to understand it requires you to put in your original windows disc at some point, and i assume your original key, but will it accept a 32 bit disc/key?
View 5 Replies
View Related
Feb 28, 2010
I got windows 7 ultimate 32bit free from my school, and decided that I wanted to clean install, and not upgrade it. I transferred all my files off, booted the laptop up with the windows 7 disk, and proceeded to clean install. I didn't have the drivers cd for my laptop, but I just wiped my drive and installed 7 anyway. Now I have windows 7 ultimate 32bit, and can only use 3 of my 4 gigabytes of memory.. The thing I don't really understand is the whole upgrading option, and like, I know that it's a windows 7 32bit dvd, but it doesn't seem right to go from 64bit to 32bit. So is there anyway I can make it 64bit without having to buy a new dvd? And if not, how much am I missing out on, with not having 64bit, especially with having 4 gigabytes of ram?
View 1 Replies
View Related
Feb 9, 2011
i recently had to get a new hdd for my MSI CX600 laptop and im trying to install windows 7 on it, when it asks to select what drive to install on no drives are listed.
the hdd is listed in the bios and i have tried the shift+f10 and list disk etc and nothing is working. now i gotta rest my thumbs as im posting this via my telstra T-Hub.
View 3 Replies
View Related
Sep 29, 2012
I downloaded the correct .iso file from the Digital River list and have since burned a new DVD using imgburn set at 4x for an excellent copy. At this point I'm not sure if I must first reset the BIOS boot order in Setup or if just having the DVD in the drive will prompt me to press any key to continue. FWIW, I'm using a Liteon DVD-ROM drive Model eTDU108.
View 3 Replies
View Related
Sep 3, 2012
I have just installed windows 7 64-bit Ultimate. I have Tested RAM (MemTest), HDD (windows), SSD(windows), GPU (Furmark)
BSOD:
1. Running only windows update, no drivers or any other software installed.
2. Running windows update and using browser (Google Chrome), AV (Microsoft Security Essentials)
3. Booted in Safe Mode with network connection.
Spec:
Asus P8Z-77-V-Pro
HDD 500GB Segate baracuda
SSD 60GB Corsair Force 3 (windows is installed here)
8GB RAM Corsair vengeance
Nvidia GTX560 ti TOP factory overclocked
Intel i5 2400s 3,7Ghz
Dump's files is attached...
View 2 Replies
View Related
Aug 23, 2012
I have Windows 7 32bit with an upgrade disc (so it only has the 32bit on it) and I would like to put 64bit on. I don't care about my data or programs (they are backed up) but I am wondering where I could get iso images and whether my product key will work.
View 4 Replies
View Related
May 4, 2011
How do you install win 7 64bit over windows 7 32bit - is it possible to make two partitions and install win 7 64bit on a differnent partition or not ?
View 6 Replies
View Related
Apr 1, 2012
I have recently downloaded Windows 7 - 32 bit onto a new discrete (i.e. Physically separate) HDD. In the installation process it had severe problems with USB and PCIe drivers. That is they don't work and there were! marks in Device Manager. I was lucky in having access to an old PS2 kybd which allowed me some access to the new os. Luckily, since I was booting off of a Windows XP Home Edition on a separate HDD I managed to use its drivers which worked on the Windows 7 and allowed me to get my USB kyybd and mouse working again. It also automatically down loaded the other drivers for my devices like the USB dongle for wireless internet access.
This is a long preamble to my actual problem and the reason for this message. I have not had as much success when I tried the same exercise; this time with Windows 7 - 64 bit installation. The 64 bit was installed on a separate partition on the same physical drive as the 32 bit version. The 32 bit drivers from Win 7 - 32 bit and XP don't work. I thought the 32 bit drivers for such basic things as USB pointing devices would work in the 64 bit version; but clearly not. Also, clearly my installation disk is negligent in not loading the drivers in either installation. Where can I go to get these basic drivers.
I have tried Logitech with no luck as my kybd/mouse combo doesn't even show up on their site. I have tried going to Microsoft site to get generic 64 bit drivers but they are not being very kind in that regard. There is nothing to download. Clearly they don't want to give anything away free! My Logitech USB kybd/mouse combo is model Y-RK56A for the kybd and M-RR95 for the mouse. My mobo is a Gigabyte GA-880GA-UD3H and I have its CD but w/o mouse I can't get it to install on the Win 7-64 partition. I thought when it installed on my XP partition it would have installed both sets of drivers. Can I extract just the 64 bit USB drivers from there?
View 7 Replies
View Related
Jan 3, 2011
I just formatted my computer and after completion of my install of Windows 7 I noticed that it installed the 32-bit version, yet for the last year it has been running the 64-bit version!! I have no idea why it won't let me install the 64-bit version, I even tried another fresh install of Windows 7 but I got the same result. Thinking it was hardware, I ran the Windows Experience Index and then clicked "View details etc.." and it indeed did say that my system IS 64-bit capable!What am I doing wrong?? Or what am I not doing in order to reach the [COLOR=blue !important][COLOR=blue !important]64-bit[/COLOR][/COLOR] install threshold?
Component Details Subscore Base score
Processor [COLOR=blue !important][COLOR=blue !important]Intel[/COLOR][/COLOR](R) Core(TM)2 CPU 6600 @ 2.40GHz 6.4 5.5
Determined by lowest subscore
Memory (RAM) 2.00 GB ---->> 5.5
Graphics NVIDIA GeForce 8800 GTS (Microsoft Corporation - WDDM v1.1) ---->> 6.7
Gaming graphics 1023 MB Total available graphics memory ---->> 6.7
[code]....
View 2 Replies
View Related
Jul 3, 2011
I'm getting a new Macbook Air without an optical drive in a couple of weeks so I'm trying to create a bootable USB drive so I can install Windows 7 on it on day one (can't live without a bit of Windows 7)
I'm currently running Windows 7 on my Dell XPS M1330 which is a 32 bit install, but I want to create a 64bit bootable USB (the new version of Windows 7 I have is 64 bit and the new computer has 4 gig of ram).
When I try and do this through Microsoft's USB DVD Download tool, though, I get an error:
'Files copied successfully. However, we were unable to run bootsect to make the USB device bootable. If you need assistance with bootsect, please click the "Online Help" link above for more information.'
The online help section didn't even mention bootsect, but I'm pretty sure this is an issue because I'm trying to create a bootable USB install stick of a 64 bit version from a 32 bit version.
Does anybody know a way around this without installing 64bit Windows 7 on my computer?
View 9 Replies
View Related
May 2, 2012
I was wondering when I get the Diablo 3. Which version of Windows 7, will it run best in?
If one versions is better than the other, than by how much is the difference?
View 4 Replies
View Related
Dec 31, 2012
I want to install 32 bit window 7 in my 64 bit laptop due to one software is not working in 64 bit operating system.
View 8 Replies
View Related
Feb 3, 2013
how can we install 32bit software on 64bit window7
View 1 Replies
View Related
Jun 1, 2012
I want to do a start up repair but only have a upgrade disk. When I try to do the start up repair and pick the OS on the hard drive it comes up with a error saying the os is not compatible even tho the upgrade was done from this disk. Can I do a start up repair or clean install without losing any software or personal files?This computer has no back up's.My reason for wanting to do a start up repair is yesterday when I woke up my computer from sleep mode the hard drive kept and is always accessing but the CPU was not really doing much so I had to wait and wait and waitIt will say a software is not responding then after a long wait time the file will open or a program will respond.To just open folder takes 5 min, open files 5+. re starting or starting from the off position takes about 15 min
View 1 Replies
View Related
Dec 30, 2012
My computer was having some problems every time I booted it up. Upon start up, I would receive an error message saying "windows failed to start, a recent hardware or software change might have caused the problem" and would give me some options to pick from like Safe Mode options and Start Normally. I would click "start windows normally" and my computer would boot up normally and run just fine. But every time I turn my computer off, I come back the next day with the same error message. I tried running the windows repair option but it would never find anything.
I decided I would just perform a clean install and just be done with it, but after doing that, I tried booting my computer to have the SAME error message. Same thing happens, I just click start normally and it works fine. It's just a total hassle to have to deal with this error message every time I try turning my computer on. Since I performed the clean install, I have very little things re installed to the computer like Java and what not. I wouldn't think it would be Java because I have had that the entire time I have owned the computer and only recently got the error messages.
View 6 Replies
View Related
Jun 20, 2012
I took my computer in for some repairs and requested that I get Windows 7 installed on it since they wiped the hard drive for me to begin with. So they did that and never bothered to ask if I wanted 32bit, or 64bit.My motherboard and so on are 64bit compatible, and the sole reason why I want this is because many of my video-games claim that I don't have enough memory with the 3.25gb of RAM usage to use certain video settings. In reality I have 16gb of RAM ready to be used, unfortunately the 32bit Windows 7 can't use it. Kind of lame that in 2012 all versions can't simply do it, but I'm sure more technological reasons negate it.Now my questions are that my current 32bit Windows 7 serial key can be used with a different install CD that is 64bit? My sister has Windows 7 64bit CD and I'm wondering is that even legal to do to begin with, as well as possible? Oh and I'm aware they must be the same version such as Home Premium, which they are.
View 9 Replies
View Related
Dec 4, 2012
So I had finally got my first build ever running a few hours ago. Was so excited. I used the program wintoflash to copy my windows installation cd to my flash drive. Popped the flash drive in my new rig and booted it up. It went to installation and took a bit of time to completely install. As it restarted after install the windows startup came up and was continuously going for quite some time and never stopped. So where I am at is that I cant get past the start up screen.
I have tried so much. I pulled out the second stick of ram, the gpu.. ran memory check with no errors, tried re installing windows in many ways (different partitions).I tried running in safe mode but it just gets stuck at disk. The only thing I knoticed is that windows 7 installs faster the second time around, even after deleting all the memory on the hard drive (advanced option during install). I have browsed the web and nothing has helped. Just got a new mobo after replacing the last defected one today, so that cannot be the problem. Completely and utterly frustrated to be presented with another speedbump after all this hard work to get it running.
My rig:
Intel i-5 3rd gen.
Kingston hyperx 2x8gb
AsRock b75m-dgs motherboard.
nvidia gt 440
Western Digital Caviar 250gb 7200.
View 5 Replies
View Related
Sep 19, 2012
I had 32 bit Windows 7 home premium provided by OEM. Recently I purchased Windows 7 professional 64 bit in order to increase my memory.(My system is 64 bit capable) I followed [1]. I am using USB for installation. I booted the system with USB. Then at disk manager I deleted all the partitions(including recovery ) Then I refreshed and click next and I got an error saying setup unable to create system partition.
View 9 Replies
View Related
Sep 29, 2012
So I messed up my laptop, it was Win 7 home 64bit. I formatted it and do a clean install, but I can only install 32bit. When I try to install 64bit, I get "hardware problem and installation could not be complete" what's that?
View 9 Replies
View Related
Oct 12, 2012
Can I install a 32 bit program on a Windows 64 bit system by turning on a function in the Bios.
View 2 Replies
View Related
Jun 22, 2012
i intend to do a clean install of Windows 7 64bit. i currently have vista32 on my primary 500gb hd. i want to move my data onto my secondary 320gb hd so that i can clean install on the 500gb ... but i still want to access the data on the 2nd (vista32) HD.i want to use the Windows 7 HD in a new pc i have built. so:
1. how best to move my data to the second HD so that it can be read by the primary?
2. will there be a problem reading the second HD in a new set up (mobo, cpu etc)?
3. should i format the 500gb and then put it in the new setup then do the clean install?3b. if i should do that - should i partition it first?
View 1 Replies
View Related
Jan 27, 2012
Can we install 32bit windowsXP on 64bit motherboard
View 2 Replies
View Related
Jun 19, 2012
I'm currently doing a clean install of windows 7 64 bit on my 32 bit XP computer, I used the upgrade advisor beforehand and it said a lot of my programs where 64 bit compatable, and a large chunk of them are on my other hard drive (the one im not installing windows 7 on). After the install is finished will they be useable or will I have to reinstall them?
View 1 Replies
View Related
Oct 24, 2009
Can you load 2 family computers man & wives in one house and the third one (Fathers) in a second house ??
These Computers are all running Vista.
Thats 3 licences total & 3 family members.
I understand these are all Upgrades 3 The question is do the computers have to all be in the same house?
That seems stupid to me but who knows?
Also a clean install to me is loaded from the computer startup is Win 7 doing a clean install from Windows desktop?
View 1 Replies
View Related
Jun 19, 2011
After a new (clean) install of Windows 7, the start menu is empty - all installed programs and other items usually posted by the installer are missing. Is there a fix (not a workaround) for this problem? There have been a lot of postings for this issue over time throughout the Internet, but I cannot find a real fix (like a patch from Microsoft) for this problem. When I install Windows 7 with a newer release of Windows 7, the start menu is populated as expected, so I can only infer that Microsoft knew about and fixed the problem in later releases, but did not post a fix. Unfortunately, I have a couple of systems that have recently been built with an earlier release of Windows 7, and subsequently, have the problem.
View 3 Replies
View Related
Mar 7, 2012
I have an old DOS cookbook program which contains all my old recipes from many years. I have it installed on my Windows 7 32-bit system and would like to put it on my laptop for use on the road. Laptop is Windows 7 64-bit and I get a message that it is not compatible. Is there a workaround so I can use that program on the 64-bit system? I tried choosing the compatibility to work with Windows XP 3 but still get that incompatible message.
View 9 Replies
View Related
Sep 3, 2010
I bought a Toshiba Satellite L500-20Z, and it does not tell me which version I am running, ( 32or64 ) though I know it IS x64. The in-store shpeil said it was equipped with Win 7 Home premium 64bit, with 32bit recovery partition.
Question 1 - is there any way to tell between 32 or 64 (apart from a "Program Files (x64)" folder on my C: drive), and
Question 2 - how do I tell what build I have? (the above link says nothing)
Question 3 - how to tell if the recovery is 64 and not just 32 without wiping my existing install?
(I suppose I could take an image of my current C: drive and use that instead of the recovery partition if disaster strikes.... only trouble is with OEM theres so much bloat and crap that's incluided...)
View 9 Replies
View Related
Mar 2, 2011
Can I boot Windows 7 64bit on a 32bit processor if the Windows installation took place on a 64bit processor?
View 10 Replies
View Related
Nov 8, 2009
I have purchased and downloaded both 32 bit and 64 bit Windows7 Professional (no CDs or media here only download version)
I sucessfully upgraded from Vista 32 to Windows 7 32
Then I upgraded my hard disk (140Gb 500GB) and RAM (3GB to to 4GB)
Now I would like to go from Windows 7 32bit to 64bit
When I try and run the Windows 7-P-retail-en-us.x64.exe file it upacks the box then stops with this error:"We are unable to create or save files in the folder in which this application was downloaded. Please check the folder properties to make sure that you have security permission on the folder to write flies and that that folder is not read only".
I am the System Admin and I have full rights, and have moved the exe and the setup box files to My Documentsand I have modified the directory properties/attributes but I still get the same error over and over.
I searched the posts and some people stated one needs a clean install others say you can upgrade from any version so I am trying the upgrade here especially since the upgrade from Vista 32 to Windows 7 32 was smooth and did require all the extra work of a reinstall.
View 1 Replies
View Related