I downloaded the correct .iso file from the Digital River list and have since burned a new DVD using imgburn set at 4x for an excellent copy. At this point I'm not sure if I must first reset the BIOS boot order in Setup or if just having the DVD in the drive will prompt me to press any key to continue. FWIW, I'm using a Liteon DVD-ROM drive Model eTDU108.
View 3 RepliesI got windows 7 ultimate 32bit free from my school, and decided that I wanted to clean install, and not upgrade it. I transferred all my files off, booted the laptop up with the windows 7 disk, and proceeded to clean install. I didn't have the drivers cd for my laptop, but I just wiped my drive and installed 7 anyway. Now I have windows 7 ultimate 32bit, and can only use 3 of my 4 gigabytes of memory.. The thing I don't really understand is the whole upgrading option, and like, I know that it's a windows 7 32bit dvd, but it doesn't seem right to go from 64bit to 32bit. So is there anyway I can make it 64bit without having to buy a new dvd? And if not, how much am I missing out on, with not having 64bit, especially with having 4 gigabytes of ram?
View 1 Replies View RelatedOkay so I bought a new motherboard and CPU, installed it and turned the computer on, then the windows 7 loads for about 5 seconds then flashes the blue screen 4 half a sec. I already know that I need to reinstall windows 7 again, but I have 2 issues. First one is I have windows7 ultimate, and if i buy windows7 home premium will I be able to do a clean install? Second question is will the install even work on my hard disk drive? I dont want to buy it and not have it load or work properly.
View 4 Replies View RelatedI am in need of a clean install of my OS, no need for any data presently on my laptop. So here is my question, where can I get a Genuine Windows 7 Home Premium 64-bit Operating System disc to use on my system that is free and can also work with my License key [which by the way is the original key that came with the laptop].Now I know that dell [which is the manufacturer of my laptop, I think it is called an OEM key] has downloadable .ISO of the OS I am in need of but I need to know if I can use that on my system with my license key and work: [code] url...
View 26 Replies View RelatedI have a computer running a 32 bit oem version of windows 7 home. I really need to change this to a 64 bit version. I do not want to do this illegally. Can I buy this upgrade copy of 7 professional, perform a clean install of windows prof. 64 bit with the upgrade disc, and then use my current oem 32 bit home disc and or license key, to validate that i do in fact have a copy of windows currently.
So technically I wont be "Upgrading" from 32 to 64, I will be re-installing. I have asked several tech savy friends, and while they don't think it cant work, they are unsure. Essentially I am asking if anyone knows what validation windows requires for its upgrade discs. I am given to understand it requires you to put in your original windows disc at some point, and i assume your original key, but will it accept a 32 bit disc/key?
Soo its an Acer travelmate 4000 laptop, 1.6Ghz, 2gig ram, clean hard drive with two partitions , primary is 30 gig , secondary 120 gig.Windows 7 home prem OEM 32 bit It gets through the first part of the install (up to the first restart) then goes on to the screen shown in part 9 of the clean install guide, highlighting the "completing installation" message Clean Install Windows 7 then stops with the progress bar about 3/2rds of the way. The drive light flashes occasionally, but otherwise nothing,I formatted and partitioned the drive in another machine.
View 9 Replies View RelatedI running Vista home basic 32 bit.
My question is can I do a clean install of Windows 7 home premium using the upgrade version?
I heard that you have to validate your old OS by inserting the vista dvd I have a vista re installation DVD that was provided to me by Dell when I bought this PC.Is this information correct and would the vista dvd I have work? or would it have to be a vista DVD I bought (not from dell).
I have just bought myself a new sony vaio laptop and im applauded at the amount of pre-installed bloat (30+ pieces of useless software).
1. is there any way i can use the recovery partition and bypass the bloat installing?
2. if i get hold of a dodgy copy of home premium OEM can I use that with my serial number to preform a clean install (leaving the recovery partition)? missing drivers etc is no problem.
Is it possible to do a clean install with upgrade version of home premium or ultimate? Meaning format everything first and then use the Windows 7 upgrade dvd to install it from scratch?
View 9 Replies View RelatedI have a problem with an Italian Windows 7 32-bit Home Premium installation that I have been unable to resolve. So I am resorting to a 'repair' install.I downloaded the English Win 7 32-bit generic version as an ISO file and started to perform an 'upgrade' install.However, I didn't get very far before I received the message that I couldn't upgrade due to the language difference.I searched on the internet but could not find an Italian version. I did find a language pack for Italian, but it is claimed to be for higher versions of Win 7 than Home Premium. In any case it isn't clear to me what I would have to do with this language pack. where I can find an applicable ISO or what else I can do in order to proceed?
View 2 Replies View RelatedI bought a Toshiba Satellite L500-20Z, and it does not tell me which version I am running, ( 32or64 ) though I know it IS x64. The in-store shpeil said it was equipped with Win 7 Home premium 64bit, with 32bit recovery partition.
Question 1 - is there any way to tell between 32 or 64 (apart from a "Program Files (x64)" folder on my C: drive), and
Question 2 - how do I tell what build I have? (the above link says nothing)
Question 3 - how to tell if the recovery is 64 and not just 32 without wiping my existing install?
(I suppose I could take an image of my current C: drive and use that instead of the recovery partition if disaster strikes.... only trouble is with OEM theres so much bloat and crap that's incluided...)
The original OS was Windows XP 32bit SP3. I upgraded this system to Windows Vista Home Premium 32bit SP2 with no issues.
I then went to upgrade the system to Windows 7 Premium. I chose the "Upgrade" install and not the "Clean" install. I've checked the updater to confirm that all my system information was adequate. I uninstalled the ATI Catalyst Controller, iTunes, etc. that it wanted me to. Oddly enough, the ATI Catalyst Controller was the most recent driver that supports Windows 7.
I checked online to see if the hardware was all supported by Windows 7. The Sapphire Vapor-X video card was not compatible or compatible... it simply wasn't on the list of either. The X-Fi Extreme Gamer said it was NOT compatible... yet, I had a driver for Windows 7 and the Windows 7 Application checker said that my sound card was ready for Windows 7... thus a discrepency.
I went on with the installation. I get to the last step where it resets the computer at 62% and I get a BSOD for about 1/3 of a second. It goes by too quickly for me to capture it. It then restarts the computer instantly with the result of "Upgrade was not completed successfully. Restoring prior OS yadda yadda". I've gone through this about 5 times now trying different things.. keeping the Catalyst controller installed, uninstalling the video card, removing the sound card, etc. Nothing seems to work.
It was recommended to me that I do a clean install... however, I have read that many others have done a clean install and theirs STILL doesn't get past the 62%.
Is it my hardware? Do I need to buy MORE hardware now that 7 is out that is on the compatible list?
Performed system restore to factory point when I first recieved the computer. When windows starts, it states that it is rpeparing the system for first time use, however it will get to the welcome screen and prompt for a user name and passwordSystem restore never asked for a user name and password. I tried using the account information from when I setup the computer originally but it does not recognize the username. Also tried to type in administrator for the user name and it says the account has been disabledI have tried to setup user through the command prompt and through the registry using the windows recovery disk. When all this failed I contacted Dell and they said I disabled the admin account during restore (I would like to know how) and I would need the windows installation disk which were not included.
View 4 Replies View RelatedIs there any way to use ansys 12.1 32bit on Windows 7 64-bit Home Premium?
View 1 Replies View RelatedWould like to know what the proper way to go about formating hard drive and reinstalling windows 7 all I have is the repair disk, data back up disk & the Image disk i got the dell laptop from bestbuy and geeksquad did the set up well actually 3 weeks ago my motherboard and processor took a crap and it was replaced but i dont have a windows disk and actually had to get a program to track down the cd key but i dont have any dell software installed in here and its missing to many system files to run down. so i fifgured i would just "start over".
View 6 Replies View Relatedmuch of a boost in speed with a clean install? Is there a list of what windows comes with? I don't use anything that came with my toshiba so I doubt any program be missed just curious still debating if this is worth it., The computer seems to know :P now its acting good
View 9 Replies View RelatedI am running Windows Vista Home Premium on my Dell Inspiron 1721. Can I upgrade to windows 7 Ultimate 64 bit software. I have purchased Windows 7 Ultimate and received both 32 and 64 bit software discs.
View 4 Replies View RelatedI have just purchased a new pc that came with Windows 7 Home Premium 64-bit, which wont run my company software, which was made in 1995, 16 bit. This 16bit software ran fine on my previous pc, which had Windows 7 Starter 32-bit. But the 64 bit Windows 7 version wont run it, I cant use Windows XP Mode on my version of Windows 7, need Pro - Ultimate Version.
I want to install and run the Windows 7 32-bit I have, on my new pc (I still have the installation disk) on a separate partition and keep the 64 bit version to. Is this possible to install both 32 bit and 64 bit versions of Windows 7 and then select which to run when the pc boots?
I bought a rather high end PC from CyberPower PC, Hard drive had problems a few months after I started using it so I sent it in for a new one. New one is not preloaded with OS, so I am attempting to install from the OS disk I got when I bought the PC.
Hardware:
Gigabyte Mother Board, GA-Z77-D3H (Is the name I found on the mb itself)
1TB Toshiba Hard Drive
(Anything else I'll have to look at when my pc is off)
I have been fooling around, probably causing more problems, for 2 days now trying to get the OS install to work.I could not install OS on Hard Drive, got error message after selecting hard disk. (Error: 0x80300002)Switched the BIOS options to default optimal settings Reran the OS installation, the installation ran very slowly and gave me an error message after I selected the Hard Drive to install windows 7 on. (Error: 0x8007045d)Found that some had success after changing hard drive setting from IDE to AHCI, after I did so the installer ran much more smoothly. However when I got to the drive select screen my hard drive was not listed or detected. (Browsing it was called Removable disk C and could not be selected)Checked BIOS to see if it was detected, it was.Reran under AHCI mode, still undetected in disk select. Online help suggested to run a diskpart in command prompt. Hard drive was not shown in that either. Changed mode back to IDE, ran OS installer, waited very long time for it to load.Computer only loads for about a second for about every minute. INCREDIBLY SLOW. This is the case whether I'm waiting on the installer or running command prompt diskpart.
Update: Running in IDE, ran a diskpart, Detects hard drive,
Info I obtained;
Disk type: ATA
Satus: Online
Path: 0
[code]....
Tried to run a clean command, failed due to I/O error. took 30+ minutes aswell Update: Booted up and ran os with AHCI setting on. Got to disk drive, still no hard drive. Started fumbling around in Diskpart in command prompt, can get the hard drive to appear as disk 4 after rescanning. any attempts to manipulate it (i.e create partition or clean of partition) results in error and the disk vanishes until I rescan.
So my mom recently bought a HP laptop kinda used, so I'm in charge of setting it up now what would you guys recommend to do a clean install of windows 7 or a factory restore? The restore doesn't take very long unlike the clean install option.
View 9 Replies View RelatedI just preorded the windows 7 upgrade and I'm wondering, is it possible for me to "upgrade" (Clean install) my windows xp 32 bit to 64bit windows 7? I've read the windows 7 FAQ and it said of your upgrading from XP, a clean install is required to upgrade but does the upgrade offer allow for xp 32bit to be upgraded to w7 64bit?
View 9 Replies View Relatedi recently had to get a new hdd for my MSI CX600 laptop and im trying to install windows 7 on it, when it asks to select what drive to install on no drives are listed.
the hdd is listed in the bios and i have tried the shift+f10 and list disk etc and nothing is working. now i gotta rest my thumbs as im posting this via my telstra T-Hub.
how do I do a clean install of 64 bit windows 7 replacing 32 bit windows 7? I purchased a separate 64 bit disk. Before the Windows 7 32 bit, it was vista 64 bit, so the system is a 64 bit system. I just need to know how to get it going. When I insert the 64 bit disk, all it says is that it is incompatible. So what do I do?
View 3 Replies View RelatedGetting ready to install new hard drive and Win 7 Home Premium 64 Bit.Previous was Vista on a different hard drive.Sales person at Fry's Electornics assured me PC would uspport Win 64(HP originally puchased 2007)PC Currently goes to Blue Screen at boot.
View 9 Replies View RelatedMy laptop is SONY VAIO VPCEE4FX comes with Windows 7 Home Premium x64 OEM installed. My auntie from U.S gave this to me on my graduation last year.. i never reformat this since i got this laptop. Now, i want to re-install this OS on my laptop but the problem is i dont have the Operating System Disk that is installed on my laptop. I called my auntie on phone and she said she doesnt have the OEM Disk. I used "KeyFinder" to know the CD-KEY of this Operating System. What can i do to re-install my operating system? Can i download Windows 7 Home Premium x64 OEM legally from certain sites?
View 8 Replies View RelatedIf I buy windows 7 oem, to put in a new pc (new harddrive, clean install etc) do I need the OPK img file and what do I do with the OPK?
View 4 Replies View RelatedHow to install gpedit.msc in windows 7 Home Premium?
View 1 Replies View RelatedAll i get is vertical lines on the screen which are multicoloured. It tries to boot the cd but then seems to freeze.Could this be a hardware failure?
View 5 Replies View RelatedI am having a problem. The OS(Windows 7 x64) finishes installing but when it finishes it boots up again like normal then flashes a quick blue screen error message. I have tried doing what the comments told you to do except for downloading the ISO and burning it to a disk. I just get the same error. I have researched this processor and it turns out it has been known to be VERY dodgy with Windows 7 64-bit.
View 9 Replies View RelatedReady to start to install Windows 7 Home Premium on my XP Home PC having passed the Windows 7 upgrade advisor Ok. Full install not upgrade. Have set BIOS to boot from CD as 1st, 2nd and also 3rd device for good measure and although I can hear disk spinning, XP boots up rather that Windows 7 setup starting.
View 9 Replies View Relatedcan we install the 32 bit version from the Professional upgrade in place of the 64 bit Home Premium with comes preinstalled? I would do this from the very beginning, so we wouldn't have installed any of our software yet, I don't think there is any bloatware form Dell that we will want. I will make the recovery copies of the 64 bit OS first, and then hopefully upgrade to the 32 bit Professional. Things are "tight", and hopefully will not have to purchase a full version of Professional.
View 9 Replies View Related