Clean Install Of Windows 7 Premium 64 Bit?
Sep 23, 2012
I bought a rather high end PC from CyberPower PC, Hard drive had problems a few months after I started using it so I sent it in for a new one. New one is not preloaded with OS, so I am attempting to install from the OS disk I got when I bought the PC.
Hardware:
Gigabyte Mother Board, GA-Z77-D3H (Is the name I found on the mb itself)
1TB Toshiba Hard Drive
(Anything else I'll have to look at when my pc is off)
I have been fooling around, probably causing more problems, for 2 days now trying to get the OS install to work.I could not install OS on Hard Drive, got error message after selecting hard disk. (Error: 0x80300002)Switched the BIOS options to default optimal settings Reran the OS installation, the installation ran very slowly and gave me an error message after I selected the Hard Drive to install windows 7 on. (Error: 0x8007045d)Found that some had success after changing hard drive setting from IDE to AHCI, after I did so the installer ran much more smoothly. However when I got to the drive select screen my hard drive was not listed or detected. (Browsing it was called Removable disk C and could not be selected)Checked BIOS to see if it was detected, it was.Reran under AHCI mode, still undetected in disk select. Online help suggested to run a diskpart in command prompt. Hard drive was not shown in that either. Changed mode back to IDE, ran OS installer, waited very long time for it to load.Computer only loads for about a second for about every minute. INCREDIBLY SLOW. This is the case whether I'm waiting on the installer or running command prompt diskpart.
Update: Running in IDE, ran a diskpart, Detects hard drive,
Info I obtained;
Disk type: ATA
Satus: Online
Path: 0
[code]....
Tried to run a clean command, failed due to I/O error. took 30+ minutes aswell Update: Booted up and ran os with AHCI setting on. Got to disk drive, still no hard drive. Started fumbling around in Diskpart in command prompt, can get the hard drive to appear as disk 4 after rescanning. any attempts to manipulate it (i.e create partition or clean of partition) results in error and the disk vanishes until I rescan.
View 9 Replies
ADVERTISEMENT
Jun 17, 2011
Okay so I bought a new motherboard and CPU, installed it and turned the computer on, then the windows 7 loads for about 5 seconds then flashes the blue screen 4 half a sec. I already know that I need to reinstall windows 7 again, but I have 2 issues. First one is I have windows7 ultimate, and if i buy windows7 home premium will I be able to do a clean install? Second question is will the install even work on my hard disk drive? I dont want to buy it and not have it load or work properly.
View 4 Replies
View Related
Dec 6, 2012
I am in need of a clean install of my OS, no need for any data presently on my laptop. So here is my question, where can I get a Genuine Windows 7 Home Premium 64-bit Operating System disc to use on my system that is free and can also work with my License key [which by the way is the original key that came with the laptop].Now I know that dell [which is the manufacturer of my laptop, I think it is called an OEM key] has downloadable .ISO of the OS I am in need of but I need to know if I can use that on my system with my license key and work: [code] url...
View 26 Replies
View Related
Sep 29, 2012
I downloaded the correct .iso file from the Digital River list and have since burned a new DVD using imgburn set at 4x for an excellent copy. At this point I'm not sure if I must first reset the BIOS boot order in Setup or if just having the DVD in the drive will prompt me to press any key to continue. FWIW, I'm using a Liteon DVD-ROM drive Model eTDU108.
View 3 Replies
View Related
Nov 16, 2009
I running Vista home basic 32 bit.
My question is can I do a clean install of Windows 7 home premium using the upgrade version?
I heard that you have to validate your old OS by inserting the vista dvd I have a vista re installation DVD that was provided to me by Dell when I bought this PC.Is this information correct and would the vista dvd I have work? or would it have to be a vista DVD I bought (not from dell).
View 3 Replies
View Related
Jul 16, 2010
I have just bought myself a new sony vaio laptop and im applauded at the amount of pre-installed bloat (30+ pieces of useless software).
1. is there any way i can use the recovery partition and bypass the bloat installing?
2. if i get hold of a dodgy copy of home premium OEM can I use that with my serial number to preform a clean install (leaving the recovery partition)? missing drivers etc is no problem.
View 9 Replies
View Related
Jul 3, 2010
Is it possible to do a clean install with upgrade version of home premium or ultimate? Meaning format everything first and then use the Windows 7 upgrade dvd to install it from scratch?
View 9 Replies
View Related
Apr 21, 2011
I own a very good custom desk PC (Intel Pentium Dual 2200; 2GRAM, 250 G hardisk). I had XPProPack3 and several severe troubles had recently spoiled its nice using. Repairing was a complete failure. I have a 'two' partition. I have installed every program that could be possible in B, plus all the other personal files. C has the system and the usual unavoidable installed other programs. I have decided to buy a brand new 7 Premium and 'clean' installing it. As, at the very beginning of my PC, the mother board had to be replaced. I think the drivers CD I keep belongs to this late. Well, for shortening this enquiry (as it's possible in real life), my concerns are: first, to get a crystal clear tutorial with the 'specificities' Windows 7 might have; second, to ask if, in the case I wouldn't have or find 'the' drivers CD, is it possible (or easy) to get them on line? Please, sorry. I am a simple amateur old computation fan (74 years old; brain still in good conditions, still working as succesful clinician and expert witness
View 3 Replies
View Related
Apr 30, 2012
Would like to know what the proper way to go about formating hard drive and reinstalling windows 7 all I have is the repair disk, data back up disk & the Image disk i got the dell laptop from bestbuy and geeksquad did the set up well actually 3 weeks ago my motherboard and processor took a crap and it was replaced but i dont have a windows disk and actually had to get a program to track down the cd key but i dont have any dell software installed in here and its missing to many system files to run down. so i fifgured i would just "start over".
View 6 Replies
View Related
Feb 28, 2010
I got windows 7 ultimate 32bit free from my school, and decided that I wanted to clean install, and not upgrade it. I transferred all my files off, booted the laptop up with the windows 7 disk, and proceeded to clean install. I didn't have the drivers cd for my laptop, but I just wiped my drive and installed 7 anyway. Now I have windows 7 ultimate 32bit, and can only use 3 of my 4 gigabytes of memory.. The thing I don't really understand is the whole upgrading option, and like, I know that it's a windows 7 32bit dvd, but it doesn't seem right to go from 64bit to 32bit. So is there anyway I can make it 64bit without having to buy a new dvd? And if not, how much am I missing out on, with not having 64bit, especially with having 4 gigabytes of ram?
View 1 Replies
View Related
Feb 13, 2013
I am getting an error "cannot install" 0x80070714 when I try to install windows 7 into a clean disk and the installation just stops..
View 3 Replies
View Related
Jan 30, 2012
I'm working on a re-install of all components following a complete corruption of the boot sector on my drive which could not be fixed with repairs. The last time I installed everything fresh, I had no issues. Between then and now, there have been no hardware changes on my system, but now I am having issues installing the IDT Codecs. I keep getting an error along the following lines: Quote: ExitError: Error=Device Object not present, restart the system and run setup again. Running under compatibility mode, and running drivers from both the motherboard CD and the manufacturer website both have the same effect. The CD, when booted, says "This OS not support!" and only contains 32-bit vista codecs. ECS' website download indicates the IDT drivers as being compatible with Windows 7. Both do not work. It is almost as if the hardware "disappeared," despite the fact that I was using the drivers quite successfully till just 2 days ago, when the boot sector went kaput.
Windows has installed its own default set, which do nothing to power the 8mm jacks which I use with my speakers, but instead put sound through the HDMI, which is useless because I use a dedicated graphics card. I have tried uninstalling this codec and re-installing IDT, to no effect. Windows replaces with its own default codec.I have referenced this thread here, but offered solutions do not seem to work for me: Intel IDT Audio Driver will not install
View 5 Replies
View Related
Feb 3, 2010
Does anyone know whether there is a difference in performance between doing a clean install of Windows 7 vs upgrading Vista? Any better stability? I'm just wondering whether it's worth the trouble of the clean install.
View 3 Replies
View Related
Jun 29, 2010
I have seen a lot on clean installs but all guides are from like 2009. Is clean install still a way to install windows 7 with upgrade disc on a new hdd? since i have a hdd with vista on it and i have the licence how do i install 7 with the licence and a black hdd?
View 9 Replies
View Related
Jan 31, 2010
I'm an IT student who got a free Win 7 x64 disk from my school, and I am unable to do a clean install. My system specs are as follows:
Intel Core 2 Duo 3.12 Ghz
nVidia GeForce 9800 GTX 512 MB PCI-e
320 GB Western Digital HD SATA
1 Gb DDR2 1066 MHz and 2x2Gb DDR2 1066 MHz SDRAM
I set my boot sequence to boot from DVD-ROM drive first, and HD second. It goes to the "Windows is loading files" screen and gets hung up. I started the process and went to watch TV for an hour, and it is still on the "Windows is loading files" screen. I haven't gotten any error messages. I've unplugged all USB devices from my computer as I have seen on this forum that it has worked for some people.
edited to add: I originally had only 2 Gb of RAM, and it got hung up at the "Windows is loading files" screen. I thought it was getting hung up because I didn't have enough RAM, so I bought brand new 2 sticks of 2 Gb RAM. I took out one of the 1 Gb sticks and placed both of the 2 Gb of RAM...for a total of 5 Gigs. And, it is still doing the same thing.
View 9 Replies
View Related
Apr 6, 2012
i've had enough of 7, I use my PC for music and after months of installing/uninstalling/re installing/researching/driver checking etc. i've decided i'm just not going to get things working with 7.
I have my XP disc and i'm ready to do a clean install, but i'm struggling to get it going... what do I do!? Inserting the XP disc brings up the autopay but the option to install is greyed out, which I understand as it's a step down. However, when I press f12 on booting to try to boot my pc from disc it just locks on the boot menu. What can I do to get a clean install of XP going?
View 14 Replies
View Related
Jun 18, 2012
I have been having numerous problems over the past wk. The firewall won't stay on, can't do windows updates etc. I have run Vipre as my anti virus and also mbam and superantispyware and everything is coming back clean. Today I decided to just backup my documents etc and then do a clean install. Now the problem is that the DVD burner doesn't show up in the BIOS. It shows up in my computer and it's running fine. If I format it out of the computer can I get windows to install from that DVD drive?
View 2 Replies
View Related
Aug 10, 2009
i wanna Format my C:/ drive and Clean install Windows 7 beta..
im inserted W7 DVD and restarted my computer.. bt doesn't Boot From Windows 7 DVD .My first boot Devise is DVD rom.second Boot Devise is HDD...
View 9 Replies
View Related
Feb 26, 2010
I didn't notice until I tried 2 burns. Then I resorted to downloading elsewhere and after 3 more downloads I got the right file(verified by hash) for 64 bit Windows Pro English. Burned the iso to my thumb drive fine, seemed to install fine and fast on this system: [code] Have 2 500GB spinpoint F3s in raid 0 and 1(setup in bios correctly and in raid menu bios fine)190GB raid 0, 375GB raid 1 using Intel raid after mostly done with install it said it had to restart so it did, but since I used a USB thumb drive it tried booting from that again instead of finishing install. I redid the install after fixing partitions and it seemed to go fine this time I removed the drive when it restarted. I was actually finally in windows 7!After installing a couple drivers I needed I restarted then things went bad.Could no longer enter windows normally because once it loaded the screen went blank.It automatically installed gfx drivers but the monitor drivers aren't installed and I was incapable of installing them after 1-2 hours trying to figure out a way. Monitor didn't show up in device manager.Monitor is an Acer2051w.I could get into safemode and try to mess with stuff.I was able to uninstall video drivers then boot into windows normally but it would automatically install the same driver and I wouldn't be able to get back in again. Automatic driver installation was off by the way.
So I couldn't fix this so I decided to reinstall Windows 7. The install went through fine, said it had to restart to finish up and after restarting the screen would stay blank forever. Doesn't seem to be installing properly now.So I can't get it installed again, and when it was it wasn't working properly. I have the monitor drivers even but no way of installing them so Windows is screwing up setting a bad resolution/ settings for the display that I can't fix hence the blank screen issue.
View 4 Replies
View Related
Apr 11, 2011
I have a retail Upgrade DVD for Windows 7 Home Premium which I purchased. I did a clean install by wiping my hard drive using the format partition option on the Windows 7 DVD. I had Vista installed on the HDD before the upgrade so the installation program could "SEE" that I had a qualifying version of Windows to validate the upgrade key.Activation was successful.Now, I want to start a clean slate. However, I don't have Vista installed anymore, just Windows 7.Can I reinstall with an upgrade key on a blank, reformatted hard drive? Will activation pass?Or do I need to reformat with the installation program on the DVD?Finally, I made an image of my Vista operating system before I upgraded, do I need to restore the image so my Win 7 DVD can once again "SEE" the qualifying Windows version?There are forums out there that say different things, yes you can, no you can't, well it depends.
View 3 Replies
View Related
Apr 5, 2012
I have a new, 120gb solid state drive I want to install windows 7 pro, 64-bit on. Does windows 7 take care of whatever formatting is needed automatically? Does it let me pick allocation size and type of formatting (e.g. NTSF versus another type)?
View 5 Replies
View Related
Aug 10, 2010
I recently had my system crash after a bad update for my graphics card and I've tried to re-install windows a number of times and have had no luck.I have tried a few of the tutorials here and formatted my HDD to try for a new clean install. I get through the first part of the install, but once my PC reboots it keeps trying to load from the disk and then I get into windows boot manager. I try to select the start windows normally option and then I get an error message saying 'Windows failed to load because the system registry file is missing or corrupt'.I have the original windows X64 product disk.
View 3 Replies
View Related
Sep 21, 2010
I am about to migrate over to Windows 7 Pro this week, just waiting for a new video card. I have XP Pro (Sp3) now. I will be using a Win 7 Pro upgrade disk. I want to start with a fresh formatted HD, I will being using a second hd (D) with XP PRO installed, will I be able to use C, or must it be installed on the same HD partition(D)? I seem to recall something about having to be on the same partition.
View 9 Replies
View Related
Nov 7, 2010
if I am already running Windows 7 32 bit on a 2Core, can I suubsequently do a clean install of Windows 7 64 bit?
what are the main advantages of 64 over 32 bit?
View 9 Replies
View Related
Aug 1, 2011
I am preparing to do a clean install on my HP laptop, as the HP Windows 7 (that came from the factory) is bloated and messed up...So, I have backed up everything and am ready to insert the retail disk and install Windows 7. I am going to use the COA key on the bottom of the laptop. Using this key, during the installation menu, will it work fine and accept it? Will I have to call Microsoft
View 7 Replies
View Related
Mar 30, 2012
I just did a clean install of Win 7. I have the intel network driver so I'm online but that's it. I have no drivers or programmes at all. What to do next.Yes I forgot to do a backup. It did create an oldwindows folder.I have genuinely activated my Win HP.I have a HP Dv7t 64-bit.
View 6 Replies
View Related
Sep 29, 2012
i have tried to install windows 7 on a brand new HD and it comes up with:"windows setup could not configure windows to run on this computers hardware" i have tried 3 times and still get the same error message. i have put the HD into another machine and installed windows 7 successfully so it can't be the new HD- the recovery disks appear to have no surface damage.i have previously installed windows 7 on new HD's on this machine before using the same recovery disks with success-what has gone wrong this time? is my computer damaged somehow? before i put in the new HD my computer was infected with a virus but this could only damage the old HD?
View 9 Replies
View Related
Apr 27, 2012
If I do a clean install of windows with preformace in mind what secuirty would you include? Just windows firewall with microsoft essentials? Would that be enough? Its a labtop on wifi (home) but I may be taking it other places at some point. I feel like avast is a great anti virus but I dunno if its possible to just run it once in awhile? Its always loaded. It seems bog system down. im also having other issues from random restarts and such freeze. Anyway what would be enough? Just make sure I don't run into the same problems (of like conflicting programs) messing up windows. Malware (installed) Microsoft essentials running all time and windows firewall is this enough? Or would it be better to just install one all in one program like.
View 6 Replies
View Related
Jan 11, 2009
How to Do a Clean Installation with Windows 7 ?
View 0 Replies
View Related
Sep 23, 2011
I have a brand new computer that i just put together and i have windows 7 on a 16 gb flash drive. I made it bootable through the program winflash and when i put it into the computer nothing happens. So i guess the question is what do i have to do to perform a clean install of windows off of my bootable flash drive.
View 2 Replies
View Related
Sep 23, 2011
I want to clean install windows 7, I have the oem version. Am I allowed to do that with the oem version?
View 7 Replies
View Related
