Clean 64bit Install In New PC But Still Access Old Vista32 Data?
Jun 22, 2012
i intend to do a clean install of Windows 7 64bit. i currently have vista32 on my primary 500gb hd. i want to move my data onto my secondary 320gb hd so that i can clean install on the 500gb ... but i still want to access the data on the 2nd (vista32) HD.i want to use the Windows 7 HD in a new pc i have built. so:
1. how best to move my data to the second HD so that it can be read by the primary?
2. will there be a problem reading the second HD in a new set up (mobo, cpu etc)?
3. should i format the 500gb and then put it in the new setup then do the clean install?3b. if i should do that - should i partition it first?
i own 2 HDD's one for installation and a media drive. Last time i reinstalled i had huge issues gaining permissions to my media and ended up deleting about 600gb of data. After recently trying out windows 8 i was stupid enough not to data my data and thought win8 would install onto a partition i made for it. I recovered my windows 7, but encountering lots of problems, so i think its time for a clean install. Is there a way to keep my permissions on my media drive for my new install? I don't have an external drive.
when Windows 7 comes out retail I want to install it. do not want to have to manually install every program n file currently on my vista 64 bit system. what is a good way to save my current setup so I can just reinstall it to the new Windows 7 system? I have an external HD 500gb I can use. searched the files here for information perhaps i am not using the correct search terms n phrases.
I know before I back up current vista I need to purge it n slim down the files n programs lol.
I currently have a 500GB SATA drive with 2 partitions, C: has Vista Ultimate in it and most of my (Really Important) data is in D:- I do not have an external drive with enough space to back up both partitions, only C: -- If I install Windows 7 on C:, will I also lose all the data in D: (Partition 2)?I want to be 100% sure I won't end up with data loss on D: if I do a clean install on C:
I have just installed windows 7 64-bit Ultimate. I have Tested RAM (MemTest), HDD (windows), SSD(windows), GPU (Furmark)
BSOD: 1. Running only windows update, no drivers or any other software installed. 2. Running windows update and using browser (Google Chrome), AV (Microsoft Security Essentials) 3. Booted in Safe Mode with network connection.
Spec: Asus P8Z-77-V-Pro HDD 500GB Segate baracuda SSD 60GB Corsair Force 3 (windows is installed here) 8GB RAM Corsair vengeance Nvidia GTX560 ti TOP factory overclocked Intel i5 2400s 3,7Ghz
I just preorded the windows 7 upgrade and I'm wondering, is it possible for me to "upgrade" (Clean install) my windows xp 32 bit to 64bit windows 7? I've read the windows 7 FAQ and it said of your upgrading from XP, a clean install is required to upgrade but does the upgrade offer allow for xp 32bit to be upgraded to w7 64bit?
I have recently downloaded Windows 7 - 32 bit onto a new discrete (i.e. Physically separate) HDD. In the installation process it had severe problems with USB and PCIe drivers. That is they don't work and there were! marks in Device Manager. I was lucky in having access to an old PS2 kybd which allowed me some access to the new os. Luckily, since I was booting off of a Windows XP Home Edition on a separate HDD I managed to use its drivers which worked on the Windows 7 and allowed me to get my USB kyybd and mouse working again. It also automatically down loaded the other drivers for my devices like the USB dongle for wireless internet access.
This is a long preamble to my actual problem and the reason for this message. I have not had as much success when I tried the same exercise; this time with Windows 7 - 64 bit installation. The 64 bit was installed on a separate partition on the same physical drive as the 32 bit version. The 32 bit drivers from Win 7 - 32 bit and XP don't work. I thought the 32 bit drivers for such basic things as USB pointing devices would work in the 64 bit version; but clearly not. Also, clearly my installation disk is negligent in not loading the drivers in either installation. Where can I go to get these basic drivers.
I have tried Logitech with no luck as my kybd/mouse combo doesn't even show up on their site. I have tried going to Microsoft site to get generic 64 bit drivers but they are not being very kind in that regard. There is nothing to download. Clearly they don't want to give anything away free! My Logitech USB kybd/mouse combo is model Y-RK56A for the kybd and M-RR95 for the mouse. My mobo is a Gigabyte GA-880GA-UD3H and I have its CD but w/o mouse I can't get it to install on the Win 7-64 partition. I thought when it installed on my XP partition it would have installed both sets of drivers. Can I extract just the 64 bit USB drivers from there?
how do I do a clean install of 64 bit windows 7 replacing 32 bit windows 7? I purchased a separate 64 bit disk. Before the Windows 7 32 bit, it was vista 64 bit, so the system is a 64 bit system. I just need to know how to get it going. When I insert the 64 bit disk, all it says is that it is incompatible. So what do I do?
I'm currently doing a clean install of windows 7 64 bit on my 32 bit XP computer, I used the upgrade advisor beforehand and it said a lot of my programs where 64 bit compatable, and a large chunk of them are on my other hard drive (the one im not installing windows 7 on). After the install is finished will they be useable or will I have to reinstall them?
I recently did a clean install of Windows 7 pro (64 bit) over an XP pro (32 bit) with 2 HD. The install proceeded without any major "hiccups". After the install, I noticed that when I try to access files on the "D" drive --- my second, I get error messages stating "user does not have access". I have tried troubleshooting but to no avail. Really would like to access those files. Both drives "show" NTFS where they were both FAT32 prior to the new OS. I don't understand how I can access the files on the "C" drive but not on the "D" drive. The files that I would most like to access are *.doc and *.pdf.
I have a computer running a 32 bit oem version of windows 7 home. I really need to change this to a 64 bit version. I do not want to do this illegally. Can I buy this upgrade copy of 7 professional, perform a clean install of windows prof. 64 bit with the upgrade disc, and then use my current oem 32 bit home disc and or license key, to validate that i do in fact have a copy of windows currently.
So technically I wont be "Upgrading" from 32 to 64, I will be re-installing. I have asked several tech savy friends, and while they don't think it cant work, they are unsure. Essentially I am asking if anyone knows what validation windows requires for its upgrade discs. I am given to understand it requires you to put in your original windows disc at some point, and i assume your original key, but will it accept a 32 bit disc/key?
I had 32 bit Windows 7 home premium provided by OEM. Recently I purchased Windows 7 professional 64 bit in order to increase my memory.(My system is 64 bit capable) I followed [1]. I am using USB for installation. I booted the system with USB. Then at disk manager I deleted all the partitions(including recovery ) Then I refreshed and click next and I got an error saying setup unable to create system partition.
Here is the story. I was running windows 7 ultimate 32 bit version. I decided to install the 64 bit version so i formated my c drive and installed the 64 bit version. All well and good except now i cannot access my d drive. I get a message "access denied". When i was using the 32 bit version i had my d drive permissions set up so that only I, as the administrator could access it and the kids login couldnt. I have gone into the drives properties and made myself the owner but still cannot access it. Also i notice that when looking at the properties it says that the drive it no free space left on it when it actually has about 300 GB left.I have gone into properties and made myself the owner of the drive but the problem is still occuringI have been told the problem is that the permission on the drive were made on the 32 bit install and I and now i am trying to change them in a 64 bit version
Trying to install a program on win7 (64bit) and it says:
"The following error occured on the file "c:windowssysWOW64odbc32.dll" Access is denied. (0x5)"
I have admin rights to this comp and I am running the install as an admin. The only thing I can think of is another program is using this .dll and making the install think its a read only. However I don't know how to find out what programs use what .dll's.
I've recently got my Win 7 installed on a (let's call it) G: disk. Before that i was using XP on a D: disk. Now when it's time to copy my data from the old disk (D: ), the problem appears. I've copied some of them files successfully, but some of them remain impossible to access. I've noticed quickly that i can't copy/move/do anything with all the files that belong to Documents and settings folder on my D:. hen I rebooted, went on XP and moved all the files which i need from D&S to a new folder on simple path D:New folder. Then I've downloaded a single MP3 file and saved it in the same directory, and rebooted again on Win 7. Now I was able to move most of them files (no sure if all of them, im still copying and searching for the useful ones), but not the new MP3 file! (300MB+ mix) This MP3 file is just an example, im pretty sure that while trying to copy my old data i will face this problem many times. This is what the message says: "You need permission to perform this action. You require permission from the computer's administrator to make changes to this file".
I've tried to change Secure options of this specific file (just as i did with the eg. explorer.exe file while applying a custom theme) but it dido downloaded "Take Control" application but didnt work either.Any solutions to solve this problem once for good? Cause even if I would now the way to deal with this 1 file, there are still many other files coming ahead
I'm trying to transfer files from an older laptop that should go into App Data\Roaming, but I get a popup that I can't write there. I've changed the file attribution to uncheck Read Only for the file and its subsequent files and folders, but still canot write to, or even get to, the Roaming part of the tree.
Windows 7 64 bit successfully installed on a new 1TB HDD and I am totally happy with it now. I kept my previous 500MB HDD with XP OS intact should I have had any problems with Windows 7. My question is this: I do not intend to use my previous XP HDD now as an alternative boot HDD but would like to access some files from it which I forgot to back up elsewhere. How should I connect it such that I can just access my files without it booting XP or maybe it wont try to boot XP anyway? Don't want to let XP boot and maybe upset things.
I have windows 7 pro version installed on my desktop, 500 GB seagate 7200 rpm HDD, intel i5 4 GB RAM. This is not required, but I am posting the hardware details. My query is that previously I used to be able to access the hidden files on my C drive, now I am not able to access them. I need to access the data files of microsoft outlook ( I have microsoft outlook 2010) installed, so that I could run synch pst for outlook. I have long back put a check mark in the folder options to allow me to see the hidden system files, but yet i am not able to access the. My user account is an administrative account. However these files are accessible by goodsync software which synchronises these files to another drive on the same HDD. I wonder if goodsync have locked these folders. I don't think so because I was able to access them previously. I also created the default administrative account in windows if that works, and logging in under that account also did not help.
i think the motherboard went out on my laptop (have a gateway nv53, turned it on one evening after using it that day and the power light came on, the cpu fan came on for a second, then nothing, no "no hard drive detected" no beeping, nothing.after taking it apart and trying to see if something came loose, i found nothing. i have a thermaltake backxduet internal drive docking station. I can see my drive, i can see everything on it, except what i really want, windows 7 puts everything in a library, i see it under user, my name, but if i click on the folder it tells me access denied. that is where all my photos and documents are, and that is what is important to me. I can get a motherboard for $150, but i dont know if it is the motherboard for sure or not, i am guessing since i get power, the cpu starts to heat up if left on for a while (amd chip) so i know the cpu is getting power, the fan is getting power, the monitor has a plug that i think i power, it is getting voltage, i also tried plugging in an external monitor and i had nothing.
I'm about to do a destructive install to Win 7 64bit, to upgrade my existing Win 7 32bit installation. I already have a partition in my hard disk ( K: ) where existing User profiles/data are stored. Luckily there is only my profile and one for a guest user. I've read through some of the Tutorials on this site on how to create new users on a different drive/partition at the point of installing Win 7, and I've read how to change the User Folder Name of a profile.The fear I have is that the newname user in the 64bit will obliterate the oldname at the point of being used for the first time.
I just reinstalled Windows 7 64bit from an OEM Disc i bought awhile ago for my system. Now that i have installed it, and updated it to the fullest, my boot time when windows is loading is really slow. 35-50 seconds to get to the Desktop. It used to take 5-15 seconds. I looked to see the Start-up services so i could disable extras, but being a clean install there wasnt any.
I also updated my BIOS, and the problem is still occurring. The Only things that are connected are my Mouse, Keyboard, and my External HDD (Which is unplugged when i boot up the system)
Here is my Configuration:
Windows 7 Home Premium (x64) Service Pack 1 (build 7601) 3.20 gigahertz AMD Phenom II X4 840 Processor 16Gig of RAM 500Gig HDD ATI Radeon HD 5770 Graphics Card Acer V223W [Monitor] DVD RW Drive Blu-Ray Drive Internal Multi-Card Reader 730 Watt Raid Max PSU Board: Gigabyte Technology Co., Ltd. GA-880GMA-UD2H Bus Clock: 200 megahertz BIOS: Award Software International, Inc. F5 09/30/2010
Would like to know what the proper way to go about formating hard drive and reinstalling windows 7 all I have is the repair disk, data back up disk & the Image disk i got the dell laptop from bestbuy and geeksquad did the set up well actually 3 weeks ago my motherboard and processor took a crap and it was replaced but i dont have a windows disk and actually had to get a program to track down the cd key but i dont have any dell software installed in here and its missing to many system files to run down. so i fifgured i would just "start over".
My power supply on my old comp died, so it was time to upgrade computers, I went from running windows XP to windows 7 now. I saved my old "previously upgraded" 320g wd internal drive to recover the data to my new machine. I got an external drive enclosure, installed everything but windows is telling me I don't have "access" to the drive. When I go into disk management, it sees the drive but it's not initialized, nor will it let me initialize it when I try.
How can I access a system partition to read and copy data? Two partitions were merged together and ended up as a system partition. All of my data files are in there.
tell me if a re-install from a system image file on my notebook is as good as a clean install from say a retail disk.I can not format all my drive and start a fresh. Can my System image file become glitchy or infected with a virus.?
I'm working on a re-install of all components following a complete corruption of the boot sector on my drive which could not be fixed with repairs. The last time I installed everything fresh, I had no issues. Between then and now, there have been no hardware changes on my system, but now I am having issues installing the IDT Codecs. I keep getting an error along the following lines: Quote: ExitError: Error=Device Object not present, restart the system and run setup again. Running under compatibility mode, and running drivers from both the motherboard CD and the manufacturer website both have the same effect. The CD, when booted, says "This OS not support!" and only contains 32-bit vista codecs. ECS' website download indicates the IDT drivers as being compatible with Windows 7. Both do not work. It is almost as if the hardware "disappeared," despite the fact that I was using the drivers quite successfully till just 2 days ago, when the boot sector went kaput.
Windows has installed its own default set, which do nothing to power the 8mm jacks which I use with my speakers, but instead put sound through the HDMI, which is useless because I use a dedicated graphics card. I have tried uninstalling this codec and re-installing IDT, to no effect. Windows replaces with its own default codec.I have referenced this thread here, but offered solutions do not seem to work for me: Intel IDT Audio Driver will not install
Does anyone know whether there is a difference in performance between doing a clean install of Windows 7 vs upgrading Vista? Any better stability? I'm just wondering whether it's worth the trouble of the clean install.