9800GTX + Windows 7 Clean Install = Fail
Sep 20, 2010
Up until about a week ago my computer was happily running along until all of a sudden - POW! A good chunk of my games no longer launch. This happened to me back in the Windows 7 beta and it was only (partially) solved when I formatted and did a clean install of the retail version. Now that it is happening again I'm just like "screw it - format now and not waste 2 months trying to fix it.Issue seems to be: Can't update GFX drivers (Tried Driver Sweeper etc. Doesn't make a difference)Can't launch a good deal of my games (most of them the affected ones use OpenGL If I could fix that, it would save me formatting but last time I scoured the internet far and wide to try and fix it to no avail."But", you say, "just format and be done with it!"The install begins fine, it extracts all the files and gets to the first reboot. After about 3-5 mins of it progressing through the final stages of the install the screen goes blank and nothing happens (HDD and disk drive both idle even after 30 mins). Presumable its installing the graphics card driver.I had this same problem last time (From beta to retail) and I did find a solution which I can't remember exactly.I was certain it was from these forums (Which is why I'm posting here) but after a good search of these forums and the rest of the general internet I couldn't find the same instructions. Incase it rings any bells with anyone, it involved something like so:Do the first stage of the install At the first reboot enter safe mode Shift+F10 to open command prompt Open device manager and remove graphics card driver (or disable card)Reboot and continue install The only problem I ran into this time is that it wasn't loading into safe mode (it got up to loading disk.sys, the second last file it normally loads, and stops there) unless I first continue the install up to the point where where the screen goes blank, but then after I disable the card and boot normally to continue the install it says it encountered an error and makes me start it over?tl;dr: Can't update/install graphics card drivers normally or during during Windows 7 install.
View 9 Replies
ADVERTISEMENT
May 23, 2012
I have a Sony Vaio VGN-NW270F 15" laptop with Windows 7 (64 bit) Home Premium. 320 gb. Oh i'm also out of warranty.Computer always freezes at the point where it says "starting windows" and stays frozen. I even left it for alone for 24 hrs and it stayed on that screen.
Things I've tried:
1. I used safe mode to repair windows = just restarted in normal mode and froze at "windows is starting"
2. Used safe mode to restore to earlier point = could not to restore message
3. Created repair disc from another Vaio win 64 = froze at "windows is starting"
4. Used registry clean and malware bytes in safe mode = malware bytes found nothing & reg clean did nothing
5. Fresh install of windows 7 = windows bar loaded then froze at "windows is starting"
6. Reformatted hard drive & performed fresh install = windows bar loaded 7 froze at same point
7. Bought new Western digital 320 gb SATA Hard drive & tried install of win 7= same results
View 1 Replies
View Related
Jun 15, 2009
i'm having an issue with my graphics card driver. the card is a gigabyte 9800gtx+ with 1GB of DDR3 ram. at present i'm using 7.15.11.7798 drivers released for windows Vista x64 on windows 7 (build 7057). i've tried upgrading the drivers (most recently to version 186) but my screen goes black on every attempt and i've had to roll back drivers on safe mode.
does anyone have a solution?
View 9 Replies
View Related
Aug 20, 2011
After reboot I get BSOD with 0x0000003B; 0xC0000000C0000005; 0xFFFFF8801893FA1; 0x0000000000000000; and TCPIP errors. Using system retore in safe mode has broken Net Framework 2 with error message unable to load sorttbls.nip or one of its dependancies. ATI Catalyst Control Centre and windows troubleshooter no longer work.
View 1 Replies
View Related
Oct 25, 2011
I recently built a new rig and I had a problem with one stick of memory. The other stick worked alright, but I've been getting random failures. Can bad memory be inconsistent? Right now, I can't start my OS up at all. It goes straight to the Windows Repair Launcher, which fails. When it gets there, I can either find a restore point or let it 'attempt to fix' for as long as I can endure. The restore point option results in 'instruction xxx failed. memory reference xxx failed.'This leads me to believe there is a problem with the memory. But, could it be the motherboard? I played a video game for hours last night, as well as surfed the web and ran other applications. Everything was fine, until I shut down. This isn't the first time this happened. Last time, I 'fixed' it by switching the 'good' memory stick with the bad. The bad resulted in getting the OS up, but lots of BSOD's
View 7 Replies
View Related
May 29, 2011
I am trying to upgrade my desktop from Windows XP to Windows 7 via disk. When it asks me where i want to install Windows, i click next and it tells me:"Windows cannot be installed to this disk. Windows needs the driver for device [Primary IDE Channel]. Click 'load driver' and select the required device driver."It doesn't find anything when I click 'load driver'. When I look in Device Manager it says the Primary IDE Channel driver is working properly. I am not sure what a Primary IDE Channel even is, so I am at a complete loss here.Computer is an Insignia d300a, a second internal hard drive is installed,and I have been unable to locate the startup disk that came with the computer. I am not sure what other information is relevant, but let me know if you need more information.All the data on the computer is saved, I just want to get Windows 7 on it...if there is no way to update that driver, is there a way I can format the hard drive and install Windows from the disk, or will it still give me problems because of the IDE Channel thing?
View 5 Replies
View Related
Jun 15, 2011
actually am not able to install windows7 on my desktop pc.
general properties:
system:
microsoft windows xp
service pack3
computer:
intel(R)
pentium(R)- 4
cpu 1.80GHZ, 1GB RAM
when am trying to boot from the dvd-rom after selecting dvd-rom as first boot device it is not get booted. then i have tried the installation by turning-on my pc i opened the windows7 folder and clicked on set-up file. then it has copied the temporaryfiles and during selection of one of the drives(the very first drive) i got the error message as
""windows cannot be installed to the disk. windows needs the driver for device [PRIMARY IDE CHANNEL].""
View 2 Replies
View Related
Oct 22, 2012
just build game rig , got genuine Windows 7 home premium , load on ssd-60gb all ok then, installation stops-loops at 70% , led from ssd in pernament- something is wrong.Find out that need to disconnect all usb ports,ect. downgrade ram, so done that , now what to reinstall Windows 7 - instalation disk can't see any drive , so BIOS - no ssd? ran install disk again . go to repair, choose cmdr- it is there under x:boot lol never seen that before. Did try to format - disk write protection, diskpart don't see any disk? connect it to other desktop - os Windows 7 will not see ssd? did I broke that drive? it's now 3 day of my crusade
View 3 Replies
View Related
Apr 2, 2012
I got an error at the windows 7 Expanding files 27% Mark. Installation missing required files windows custom install fail.
View 16 Replies
View Related
Dec 19, 2012
I tried to update to the new 310.70 whql driver and when i try to install it the installation fails. i tried to use an outdated driver and that failed to install. win 7 64 bit, asus gtx 680 dc2, asus p8z77-v
View 2 Replies
View Related
Sep 16, 2012
Since early August all my Security updates have been failing. It adds time to each boot up period as it goes through the updates and then at the end will say it's failed and is reverting all the changes. I have already done some research on this issue and ran "sfc/scannow" as well as "chkdsk/f/r." Both seemed to go through with no problems. After that I did a Windows update and 12 updates seemed to go through with no problem until the required reboot where we're back to the same issue of failing and reverting.
View 9 Replies
View Related
Feb 13, 2013
I am getting an error "cannot install" 0x80070714 when I try to install windows 7 into a clean disk and the installation just stops..
View 3 Replies
View Related
Jan 30, 2012
I'm working on a re-install of all components following a complete corruption of the boot sector on my drive which could not be fixed with repairs. The last time I installed everything fresh, I had no issues. Between then and now, there have been no hardware changes on my system, but now I am having issues installing the IDT Codecs. I keep getting an error along the following lines: Quote: ExitError: Error=Device Object not present, restart the system and run setup again. Running under compatibility mode, and running drivers from both the motherboard CD and the manufacturer website both have the same effect. The CD, when booted, says "This OS not support!" and only contains 32-bit vista codecs. ECS' website download indicates the IDT drivers as being compatible with Windows 7. Both do not work. It is almost as if the hardware "disappeared," despite the fact that I was using the drivers quite successfully till just 2 days ago, when the boot sector went kaput.
Windows has installed its own default set, which do nothing to power the 8mm jacks which I use with my speakers, but instead put sound through the HDMI, which is useless because I use a dedicated graphics card. I have tried uninstalling this codec and re-installing IDT, to no effect. Windows replaces with its own default codec.I have referenced this thread here, but offered solutions do not seem to work for me: Intel IDT Audio Driver will not install
View 5 Replies
View Related
Feb 3, 2010
Does anyone know whether there is a difference in performance between doing a clean install of Windows 7 vs upgrading Vista? Any better stability? I'm just wondering whether it's worth the trouble of the clean install.
View 3 Replies
View Related
Mar 26, 2012
I've no idea what's causing this. I tried installing the language packs last night and woke up the next morning to the error codes mentioned above.
View 1 Replies
View Related
Jun 29, 2010
I have seen a lot on clean installs but all guides are from like 2009. Is clean install still a way to install windows 7 with upgrade disc on a new hdd? since i have a hdd with vista on it and i have the licence how do i install 7 with the licence and a black hdd?
View 9 Replies
View Related
Jan 22, 2012
I was trying to install updates on my wife's computer for office 2010, when I received a message that updates failed. On going back to previous updates, I realized, that none of the updates had installed. I immediately checked to make sure the office setup exe file was enabled, and it was. Windows updates install just not office updates. (Amd 64 dual-core 6 gb ram 2 itb hdd. windows vista home premium 64-bit). What can I do to get these updates to install? Event viewer gives this output: Product: Microsoft Office Professional Plus 2010 -- Error 1606. Could not access network location %APPDATA%.I also got a error code:80070643. What do I need to do to get the updates to install?
View 1 Replies
View Related
Aug 21, 2012
Friends "out of the blue" my rock-solid-for-three-years windows 7 Ultimate x64 rig seems to have a permissions issue [I'm guessing]. I went to uninstall a program, and it failed. tried to install a program and it failed. Did windows updates, selected about 10 or so, most installed ok, but three failed. I created a new administrator-level account [the system has only had one in its history, the main/only I have ever used], tried to logon for the first time, and it failed.This system is on a LAN [wifi bridged AP] and is a Homegroup owner, but it is not on a Domain.
[code].....
View 5 Replies
View Related
Mar 26, 2011
I tried installing my NEC USB3 3.0 Host Controller File after a repair/upgrade install. Now, I get the above error during the driver setup. I downloaded the driver directly from Asus.
View 3 Replies
View Related
Nov 19, 2012
I am running Win.7 64 bit Home Prem. Those updates won't install. I have tried to download from the net and they still wouldn't install. I even tried The Fixit link.I tried to reload Net Framework 4 but I couldn't. It wouldn't uninstall or repair.
View 1 Replies
View Related
Jan 31, 2010
I'm an IT student who got a free Win 7 x64 disk from my school, and I am unable to do a clean install. My system specs are as follows:
Intel Core 2 Duo 3.12 Ghz
nVidia GeForce 9800 GTX 512 MB PCI-e
320 GB Western Digital HD SATA
1 Gb DDR2 1066 MHz and 2x2Gb DDR2 1066 MHz SDRAM
I set my boot sequence to boot from DVD-ROM drive first, and HD second. It goes to the "Windows is loading files" screen and gets hung up. I started the process and went to watch TV for an hour, and it is still on the "Windows is loading files" screen. I haven't gotten any error messages. I've unplugged all USB devices from my computer as I have seen on this forum that it has worked for some people.
edited to add: I originally had only 2 Gb of RAM, and it got hung up at the "Windows is loading files" screen. I thought it was getting hung up because I didn't have enough RAM, so I bought brand new 2 sticks of 2 Gb RAM. I took out one of the 1 Gb sticks and placed both of the 2 Gb of RAM...for a total of 5 Gigs. And, it is still doing the same thing.
View 9 Replies
View Related
Aug 7, 2012
my brother's hdd in his laptop was going bad, it kept failing to boot. so i replaced it with another one. when i turned the laptop back on it started installing all the drivers for his hardware (windows was already installed on the 2nd hdd) and prompted me to reboot. after i did windows failed to start several times. i re-installed windows from scratch, and now his graphics card isn't showing up in device manager and windows cant find a driver for the network or ethernet card.
his specs:
gateway
windows 7 professional x64
ati mobility radeon hd 4250
broadcom bcm943225hm (network card)
amd phenom II x4 n9790
4gb ddr3
View 1 Replies
View Related
Apr 6, 2012
i've had enough of 7, I use my PC for music and after months of installing/uninstalling/re installing/researching/driver checking etc. i've decided i'm just not going to get things working with 7.
I have my XP disc and i'm ready to do a clean install, but i'm struggling to get it going... what do I do!? Inserting the XP disc brings up the autopay but the option to install is greyed out, which I understand as it's a step down. However, when I press f12 on booting to try to boot my pc from disc it just locks on the boot menu. What can I do to get a clean install of XP going?
View 14 Replies
View Related
Jun 18, 2012
I have been having numerous problems over the past wk. The firewall won't stay on, can't do windows updates etc. I have run Vipre as my anti virus and also mbam and superantispyware and everything is coming back clean. Today I decided to just backup my documents etc and then do a clean install. Now the problem is that the DVD burner doesn't show up in the BIOS. It shows up in my computer and it's running fine. If I format it out of the computer can I get windows to install from that DVD drive?
View 2 Replies
View Related
Aug 10, 2009
i wanna Format my C:/ drive and Clean install Windows 7 beta..
im inserted W7 DVD and restarted my computer.. bt doesn't Boot From Windows 7 DVD .My first boot Devise is DVD rom.second Boot Devise is HDD...
View 9 Replies
View Related
Feb 26, 2010
I didn't notice until I tried 2 burns. Then I resorted to downloading elsewhere and after 3 more downloads I got the right file(verified by hash) for 64 bit Windows Pro English. Burned the iso to my thumb drive fine, seemed to install fine and fast on this system: [code] Have 2 500GB spinpoint F3s in raid 0 and 1(setup in bios correctly and in raid menu bios fine)190GB raid 0, 375GB raid 1 using Intel raid after mostly done with install it said it had to restart so it did, but since I used a USB thumb drive it tried booting from that again instead of finishing install. I redid the install after fixing partitions and it seemed to go fine this time I removed the drive when it restarted. I was actually finally in windows 7!After installing a couple drivers I needed I restarted then things went bad.Could no longer enter windows normally because once it loaded the screen went blank.It automatically installed gfx drivers but the monitor drivers aren't installed and I was incapable of installing them after 1-2 hours trying to figure out a way. Monitor didn't show up in device manager.Monitor is an Acer2051w.I could get into safemode and try to mess with stuff.I was able to uninstall video drivers then boot into windows normally but it would automatically install the same driver and I wouldn't be able to get back in again. Automatic driver installation was off by the way.
So I couldn't fix this so I decided to reinstall Windows 7. The install went through fine, said it had to restart to finish up and after restarting the screen would stay blank forever. Doesn't seem to be installing properly now.So I can't get it installed again, and when it was it wasn't working properly. I have the monitor drivers even but no way of installing them so Windows is screwing up setting a bad resolution/ settings for the display that I can't fix hence the blank screen issue.
View 4 Replies
View Related
Apr 11, 2011
I have a retail Upgrade DVD for Windows 7 Home Premium which I purchased. I did a clean install by wiping my hard drive using the format partition option on the Windows 7 DVD. I had Vista installed on the HDD before the upgrade so the installation program could "SEE" that I had a qualifying version of Windows to validate the upgrade key.Activation was successful.Now, I want to start a clean slate. However, I don't have Vista installed anymore, just Windows 7.Can I reinstall with an upgrade key on a blank, reformatted hard drive? Will activation pass?Or do I need to reformat with the installation program on the DVD?Finally, I made an image of my Vista operating system before I upgraded, do I need to restore the image so my Win 7 DVD can once again "SEE" the qualifying Windows version?There are forums out there that say different things, yes you can, no you can't, well it depends.
View 3 Replies
View Related
Apr 5, 2012
I have a new, 120gb solid state drive I want to install windows 7 pro, 64-bit on. Does windows 7 take care of whatever formatting is needed automatically? Does it let me pick allocation size and type of formatting (e.g. NTSF versus another type)?
View 5 Replies
View Related
Aug 10, 2010
I recently had my system crash after a bad update for my graphics card and I've tried to re-install windows a number of times and have had no luck.I have tried a few of the tutorials here and formatted my HDD to try for a new clean install. I get through the first part of the install, but once my PC reboots it keeps trying to load from the disk and then I get into windows boot manager. I try to select the start windows normally option and then I get an error message saying 'Windows failed to load because the system registry file is missing or corrupt'.I have the original windows X64 product disk.
View 3 Replies
View Related
Sep 21, 2010
I am about to migrate over to Windows 7 Pro this week, just waiting for a new video card. I have XP Pro (Sp3) now. I will be using a Win 7 Pro upgrade disk. I want to start with a fresh formatted HD, I will being using a second hd (D) with XP PRO installed, will I be able to use C, or must it be installed on the same HD partition(D)? I seem to recall something about having to be on the same partition.
View 9 Replies
View Related
Nov 7, 2010
if I am already running Windows 7 32 bit on a 2Core, can I suubsequently do a clean install of Windows 7 64 bit?
what are the main advantages of 64 over 32 bit?
View 9 Replies
View Related
