Windows 7 Nor Windows 7 Repair Disc Will Not Boot, Keep Getting 'startup Repair'
Feb 3, 2012
I have a Toshiba Satellite C655-S5132 that just shut down & now will not boot Windows 7. Just goes to black screen w/blinking cursor then goes to 'startup repair' (which I'm postiive this is a virus of somekind) & will not allow me to do anything. Just repeats itself. I downloaded Windows 7 repair to a CD-R, chgd BIOS settings to CD/DVD to boot first, saved changes, and will NOT pull/boot up from disc. I've tried 2diff repair discs, both do not work. 'F8' does not do anything for me, not able to get to 'safe mode'. Computer is only 2yrs old.
View 9 Replies
ADVERTISEMENT
Dec 14, 2012
windows 7 startup repair on every boot but after startup repair hibernate works. How to fix?
View 1 Replies
View Related
Nov 16, 2011
I couldn't find Windows 7 Repair Disc / Repair System / rewrite MBR for x64?
View 1 Replies
View Related
May 11, 2011
I am pretty sure that a virus cause this, right before my computer shut down on it's own my anti virus popped up and said that a Trojan was found but I didn't have to do anything. Then the computer shut down and when it restartrd started to load files and then go into startup repair, only it couldn't fix it. I tried a restore, but again it said that the startup files wern't there. I just quickly scanned the diagnostic details and noticed something that said "boot critical file C:CI.dll is corrupt".
View 8 Replies
View Related
Jan 15, 2013
I just created a system repair disc by clicking "Create a system repair disc" on my computer. The disc was successfully created, then I went to boot it up in VirtualBox and I get a Toshiba error: F3-F100-0003. How could this be? I don't think VirtualBox or the repair disc would have anything to do with Toshiba. I created this disc with a factory preinstallation of Windows 7 on a Toshiba laptop. Did Toshiba put a custom disc image on the computer which will be burned to the disc? Does VirtualBox use the host computers BIOS? (maybe not possible because there was a Windows 7 cursor in front of the error box) Does Microsoft use Toshiba technology in their repair discs?
View 3 Replies
View Related
Jun 4, 2012
I've been having trouble trying to get my computer to boot; I'd noticed a drop in performance (still unsure why) so decided to boot up in safe mode and poke around - it was not my original intention to install AC 5.3.0 but somehow it happened. I ran the 'deep-care' utility and everything was working fine, my computer rebooted and performed a disk check: there weren't any errors that I can remember apart from [something along the lines of] 60 reparse files. Following this my computer restarted and Windows failed to load, restarting to show me startup repair - this isn't the first time this has happened, a similar thing occurred following previous attempts at boosting speed, though before I was able to get Windows up and running using an Ubuntu installation disk... still don't understand why - no need to say that it didn't work this time. Startup repair refuses to work and my system restore points have vanished; I would try doing a repair install if I had a copy of the disk. I built the computer myself a few months back, borrowing a Windows 7 installation disk from a friend (who has now conveniently lost said disk), startup repair does tell me something about 'Problem Signatures'. [code]
View 2 Replies
View Related
Mar 16, 2011
So yesterday I added another hard drive to my computer. I now have 2 SATA hard drives running in my machine. I used the disk managment, and the 2nd hard drive is working as it should.
However, when I shut down my computer and turned it back on, Windows will boot to the Startup Repair screen every time. I checked the BIOS and made sure the boot order was correct, and even took the 2nd hard drive off the boot order in order to make sure it wasn't causing any issues. It's pretty annoying, because every time I start up, I have to wait for the whole repair process before it will load normally. Each time it always says that there are no repairs that could be made.
I also am not able to put my computer in sleep mode any longer. I believe my BIOS setting is set to S1, and before I never had any problems. I would put my comp to sleep and everything would be fine. After the 2nd hard drive, my monitor will turn off and it sounds like 1 of the hard drives turns off, but the CPU and fan are still running and it does not completely go to sleep.
View 4 Replies
View Related
Oct 21, 2012
I've got two hard drives with Windows 7 on it. One of them, the operating system crashed entirely, on the other, it's a perfect copy of how the other hard drive was at factory settings (drivers and all). Now, you're probably wondering, hey, why not use the other hard drive? Thing is, I'm trying to save / keep all the programs on the first hard drive in order to save myself the hassle from 1) pretending I'll find / looking for the disks that I know I don't have and 2) the time it'd take to install them.the machine was *not* giving me anything except sending me over to start up repair, stating that it couldn't fix the problem. I used the other hard drive to boot into Windows, and was hoping to do a repair option on the other hard drive. Unfortunately, I don't think that's entirely possible. I used Hirens Boot CD to check out the System32 / Syswow64 folders, and there was hardly anything in there. So, naturally, started copying off certain sub folders from one to the other. Now, I can get it to attempt to boot / it sees the partition / I go to safe mode, and it hits Classpnp.sys for a split second, then startup repair. Startup repair let's me see that there is one root cause, but, after doing its thing, says that it didn't detect an issue with the startup.
1x Sony Vaio laptop 2x Hard drives (one with a factory restored image on it, another one that won't boot into the OS)The hard drive that I need to boot from / one that has my programs goes to Startup Repair after hitting Classpnp.sys in Safe Mode Startup repair has one thing fail (StartupRepairOffline issue), but says it didn't detect a problem / everything booted fine afterwards Attempted to rebuild the BCD (after successful fixmbr / fixboot), but it states it sees 0 installations of windows. However, I have a Windows 7 retail disk that sees the installation folder.
View 4 Replies
View Related
Jun 29, 2012
I am having a nightmare with my Dell Latitude E4300 laptop. At the moment it runs a continuous loop of start up repair and will not allow me to even attempt to get into Windows 7 until this has been done. When it runs the test it stops, giving the error message no OS files found on disk. Everytime I restart this process just continues.It is a work laptop, so I do not have and windows recovery disks.To make matters even worse, before the startup repair loop the laptop wouldnt even let me into the Windows system, even in safe mode. After attempting to get into safe mode it would stop at the driver classpnp.sys. Further tests would also show up the error message 2000 0146.I am not technical at all, so am hoping this is going to make sense to someone who can explain it in very simple lanuage.Just to reconfirm, I do not have any windows recovery disks - and cannot access safe mode at all.
View 2 Replies
View Related
Jul 21, 2012
I have searched on this forum and Google to see if others are having the same issue. After updating Windows last week, my computer has been in a consistent state of decline. Today, I powered the CPU down and it will not start-up again. I have attempted to use the windows repair disc, but am now told that startup repair cannot fix my problem.
View 4 Replies
View Related
Nov 27, 2010
with my custom built desktop. My custom built has been acting up like mad only a month after creation. It worked perfectly at first, but then I suddenly found that half of my services were disabled randomly. As well, my computer kept connecting with limited access to my household wireless connection, quite simply meaning I couldn't connect to the internet.Eventually, after throwing all the solutions I could find on the net at it (sfc/scannow, system restore, enabling the systems manually through and elevated control panel and even upgrade installs (with the original OEM system builders disc), I gave up and did a complete reinstall, wiping everything on my hard drive and starting again.Unlike the upgrade install I attempted, this actually worked and my computer worked perfectly...until I updated windows. After downloading the 53 updates windows update thought I needed, when I booted up my computer the next time, the internet stopped working again, with half of my services stopped (including Diagnostics Repair).Now every time I boot up my computer, I come to a Startup Repair screen that fails every time.Here is the message I get: Startup Repair cannot repair this computer automaticallyProblem signature:Problem Event Name:StartupRepairOfflineProblem Signature 01:6.1.7600.16385Problem Signature 02: 6.1.7600.16385Problem Signature 03: unknownProblem Signature 04: 21200686Problem Signature 05: AutoFailoverProblem Signature 06: 3
View 9 Replies
View Related
Apr 7, 2011
I have a toshiba laptop that runs windows 7 32bit home premium and it is not booting properly. When I turn it on t will show the microsoft logo and says "starting windows" but never gets past that point. I have tried all the fixes to no avail including, safe mode (will not boot into safe mode..starts to load but stops at drivers/atipcie.sys and sits there for a minute or two and goes to the repair startup recommended screen. I have tried startup repair and done it many times because I have read it can take several times (it says "startup repair cannot repair this computer automatically") I have tried the windows repair disc using system restore but it says no restore points found, even though i know they are on my computer. All of my school files are on this computer and while I have some of there backed up on a external hard drive there are some more recent files that are not. What can I try without a clean install to try and repair this?
View 2 Replies
View Related
Sep 21, 2012
I've had an ongoing war with my PC for four days now. I have Windows 7 and it refuses to start up. Originally I tried starting up normal, it gave me two choices: system repair or start as normal. If I chose normal it would show the windows logo then reset. If I chose repair it would turn black for several minutes, then go to a blue screen for several minutes and wouldn't move past that. So i tried to boot from CD. I have the option of installing windows or repair. I chose repair, once again it goes to the blue screen and nothing happens (and I've left it on this blue screen a good 15 min mind you.) Finally I submitted and decided to just re-install windows. it goes to the starting setup... and sits there indefinably.
View 5 Replies
View Related
Dec 2, 2012
I tried turning on my computer today and it gets stuck at the "Starting Windows" logo. It just hangs there indefinitely (usually only takes a couple seconds) and doesn't load. I then tried startup repair, and that just takes me to a black screen. After that, I tried putting in my Windows 7 boot disc to do a clean install, told the BIOS to boot to CD/DVD drive. It tells me to press a key, I do. I get "Windows is loading files" and then it goes back to "Starting Windows" forever, yet again. This happened so suddenly, it was working fine just hours before this.
View 3 Replies
View Related
Dec 13, 2012
After rebooting my system, it recommended that i do a start up repair. After the repair completed i recieved the black screen right before choosing USER, so i tried 3x more to repair which each completed but same outcome till the point it just says cant repair automatically . Then i tried to system restore which failed also , but the catch is my system boots fine from Safe Mode.. what to do from Safe Mode to return my boot up back to normal?
View 4 Replies
View Related
Dec 7, 2012
Earlier today I tripped over a headphone cord and it flung my computer off my desk. I have an HP omni PC. It's the kind that had the computer and the monitor built together. I picked it back up off the floor. The power cord came out on impact. I set everything back up and was relived to hear it turn on. I selected start windows normally (win 7 64 bit) and it sat at starting windows forever. I eventually manually shutdown the computer. I powered back on and I got an option to start windows normally or use startup repair.
I thought it would be a good idea to go into startup repair. It just sat at the light blue screen with the large white mouse sitting there. Nothing happened. Nothing appeared on screen. I turned off the computer again and am just leaving it there for now. I am worried that the hard drive may have been disconnected from the fall and that's why windows won't start. Or maybe the hard drive was damaged. I tried doing a safe mode boot but it redirected me to startup repair.
View 17 Replies
View Related
May 23, 2012
I have a Sony Vaio VGN-NW270F 15" laptop with Windows 7 (64 bit) Home Premium. 320 gb. Oh i'm also out of warranty.Computer always freezes at the point where it says "starting windows" and stays frozen. I even left it for alone for 24 hrs and it stayed on that screen.
Things I've tried:
1. I used safe mode to repair windows = just restarted in normal mode and froze at "windows is starting"
2. Used safe mode to restore to earlier point = could not to restore message
3. Created repair disc from another Vaio win 64 = froze at "windows is starting"
4. Used registry clean and malware bytes in safe mode = malware bytes found nothing & reg clean did nothing
5. Fresh install of windows 7 = windows bar loaded then froze at "windows is starting"
6. Reformatted hard drive & performed fresh install = windows bar loaded 7 froze at same point
7. Bought new Western digital 320 gb SATA Hard drive & tried install of win 7= same results
View 1 Replies
View Related
Jan 22, 2012
So, I'm not exactly sure what I did. I was clearing up some space on my computer after using the Norton Removal Tool to get rid of this Norton trial popup that came up everytime I booted my computer. Now, after it told me to restart, it seems to be stuck in an endless boot cycle that resets itself after showing the Windows logo. I've since tried running startup repair, which freezes as it shows the progress bar for 'Windows is loading files'. Safe mode will not work, either. It just sends it back into the boot cycle. Not sure what to do at this point. My computer came pre-installed with Windows 7 Home Premium 64bit, so I don't have any startup discs.
View 3 Replies
View Related
Dec 10, 2010
Windows wont boot up I get stuck on the "starting windows screen" Startup Repair cannot repair this computer automatically:
Problem signature:
�Problem Event Name: StartupRepair Offline
�Problem Signature 01: 6.1.7600.16385
�Problem Signature 02: 6.1.7600.16385
�Problem Signature 03: unknown
�Problem Signature 04: 21200718
�Problem Signature 05: AutoFailover
�Problem Signature 06: 10
�Problem Signature 07: BadDriver
�OS Version: 6.1.7600.2.0.0.256.1
�Locale ID: 1033
View 1 Replies
View Related
Oct 5, 2012
I cannot get my computer to restart. It tries to restart but keeps saying that startup repair cannot repair computer automatically. I try to do a system restore but it won't let me do that either
View 1 Replies
View Related
Mar 24, 2012
On start up a black and white gateway screen flashes followed by a startup Repair window.This gives me a pop up that says Startup Repair cannot repair this computer automatically.There is the option of sending the information to microsoft or viewing problem details.When looking at the details, Problem Signature:Problem Event Name:StartupRepairOfflineProblem Signature 01:6.1.7600.16385Problem Signature 02:6.1.7600.16385Problem Signature 03:unknownProblem Signature 04: 21200290Problem Signature 05:AutoFailoverProblem Signature 06:11Problem Signature 07: CorruptFileOS Version:6.1.7601.2.1.0.256.1Locale ID:1033Underneath the pop up box, The startup Repair window says WIndows cannot repair this computer automaticallywith the option of viewing diagmostic repair details or viewing advanced options for system recovery and support Under the advanced options, I have tried the startup repair, the system restore, the command promptchkdsk/f/rNone of which have worked Prior to this the notebook was working fine last night, I did not install anythingI ran the Farbar Recovery Scan ToolMod Edit: Removed FRST data, this is a malware tool not permitted in this forum and you have made no indication that this is a malware situation ~ Hamluis.
View 7 Replies
View Related
Jul 31, 2010
Start up repair cannot repair this computer automatically , I am getting this all of the time now when starting the PC ,i am sure it started when a new video card got put in but not sure?
View 2 Replies
View Related
Mar 10, 2011
I have no idea what was the last thing done on this computer (it is my wifes), but I do know that every now and then there has been a disc failure, checking disc startup, but it has always had a positive outcome.[CODE]
View 4 Replies
View Related
Jul 24, 2012
i use ubuntu OS and windows7 professional on an HP dv5 notebook, last week i made a mistake in that i removed the battery while the machine was on as i was using windows7. the time i tried to restart it again it recommended startup repair which ran but 'could not repair it automatically' i tried the f8 options but to no avail. when i run scan and memory diagnostics all are successful but the system can still boot. am able to view my data on windows through ubuntu but ubuntu can't execute windows programs. what should i do to restore windows without loosing data?
View 5 Replies
View Related
Aug 8, 2012
Hardware Information (This is from memory and may not be completely accurate):The computer model is emachines The processor is a dual core Intel Pentium The graphics card is NVIDIA (Can't remember the model.)4GB of RAM installed Software Information (Also from memory, but this is likely to be more accurate than the hardware.): Windows 7 Home Premium 64bit Antivirus software is Comodo Internet Security - Also the firewall (product information).I often used Advanced System Care for optimization.-product information.after searching the internet for ways to fix my problem for the past three days, I'm at a complete loss. I was told by a professional that my registry was likely corrupted and that my best bet would be to re-install Windows entirely. I was hoping it wouldn't come to that, but was prepared nonetheless.So I inserted the installation disk, and wouldn't you know it, the installer wouldn't recognize my hard drive (BIOS recognizes it though). Searching for reasons why this was happening only turned up people saying to make sure it was recognized by BIOS, which I considered a no brainier. When it still didn't work for people in certain threads, they were told to try wiping their hard drives. I've done it. Windows still doesn't want to notice my hard drive.After that, I decided to try and install Windows to an external hard drive. I know this isn't how Windows was designed, and I knew it wasn't how Windows was meant to be used, but I was (to my knowledge) out of other options (Also, the external hard drive has 1 TB of space on it, so I wasn't concerned about speed loss). So, I searched for ways to do that, and I came across PWboot. The first half of the installation worked, the second half did not. I began getting an error that read (bootmgr is missing press ctrlalt+delete to reboot.) Which I did. But that didn't fix anything. So I tried the entire process again, and it didn't work.The "Repair your computer" feature in the windows install disk turned up nothing as well. I can't "Factory Reset" because it can't detect any installation of windows, the startup repair function can't "repair this computer automatically", and none of the other options will even open (with the exception of the command prompt, but most of the commands aren't valid for some reason.)
View 9 Replies
View Related
Nov 5, 2009
Is there a way (or tutorial) to create a repair disc for a multi boot Windows 7/Vista on a USB flash drive? In other words would like to be able to use a USB flash drive in an emergency to boot into a multi boot computer using Windows 7/Vista.
I see where there is a way to create a Vista/XP multi boot USB repair disc but not one for Windows 7/Vista multi boot. Evidently the boot files for Vista/XP are different from the boot files for Windows 7/Vista. I have a 4GB flash drive that I would like to use.
View 3 Replies
View Related
Dec 30, 2012
I have a hp G71-449WM Notebook running Windows7 premium 64bit. I can't boot computer the repair disc I have doesn't seem to work. I have no installation disc to fall back on and I can not seem to get it to boot in safe mode. Right now its asking me to find the needed driver in the driver folders. Unless it's called something else I do not see a bootmgr driver. Right now its asking me to connect to the network which would be cool but i don't know what folder they where asking me to type in.
View 3 Replies
View Related
Dec 13, 2012
After rebooting my system, it recommended that i do a start up repair. After the repair completed i recieved the black screen right before choosing USER , so i tried 3x more to repair which each completed but same outcome till the point it just says cant repair automatically . Then i tried to system restore which failed also , but the catch is my system boots fine from Safe Mode..what to do from Safe Mode to return my boot up back to normal?
View 2 Replies
View Related
Apr 17, 2012
On boot it is taking him to the windows 7 startup repair which fails with StartUpRepairOflline AutoFailover CorruptFile
I have suggested the following, all which have failed to make a difference:
bootrec.exe with /fixmbr /fixboot and /RebuildBcd
Run chkdsk
Startup repair
System Restore - two dates tried
The pc is about a month or so old, and I'm thinking it could be a hardware issue, hard drive?
Two things I am going to try when I get there is a WD Diagnostics on the Hard drive, and the sfc
View 7 Replies
View Related
Dec 26, 2012
Recently my computer has been randomly just giving me the BSOD. Normally this problem was resolved by a simple restart but tonight about an hour before I posted this, the blue screen sent me back to startup but instead of giving me the usual "Security mode" and Regular Startup. It gave me Startup Repair and normal startup. After clicking normal startup just to see if it would correct itself like normal,my pc instantly BSOD'd, bringing me back to my two options. I've been sitting here staring at the startup repair screen for about an hour now.
View 2 Replies
View Related
Feb 11, 2013
I have a pavillion dv6- laptop that's stopped being able to boot up windows? It only goes to the screen with the option of starting windows normally (which brings me back to the same screen) or going to startup repair. When I go to repair it says Got some important data in c drive can't install new windows all data will wipe up what to do now?
View 3 Replies
View Related
