Computer Going Into Startup Repair On Boot?
Apr 17, 2012
On boot it is taking him to the windows 7 startup repair which fails with StartUpRepairOflline AutoFailover CorruptFile
I have suggested the following, all which have failed to make a difference:
bootrec.exe with /fixmbr /fixboot and /RebuildBcd
Run chkdsk
Startup repair
System Restore - two dates tried
The pc is about a month or so old, and I'm thinking it could be a hardware issue, hard drive?
Two things I am going to try when I get there is a WD Diagnostics on the Hard drive, and the sfc
View 7 Replies
ADVERTISEMENT
Jul 28, 2011
When I start up my computer, It shows the DELL logo. Then, it shows a grey bar that spans the screen saying "Windows is loading files..." Next a green bar that says: "Microsoft Corporation" Startup repair automatically starts. It runs for a little while and then it says:
"Startup Repair cannot repair cannot repair this computer automatically
->Send information about this problem (recommended)
->Dont Send
[V] View problem details"
The problem details are:
"Problem signature: Problem Event Name: StartupRepairOffline
Problem Signature 01: 6.1.7600.16385
Problem Signature 02: 6.1.7600.16385
Problem Signature 03: unknown
Problem Signature 04: 21200906
Problem Signature 05: AutoFailover
Problem Signature 06: 14
Problem Signature 07: CorruptFile
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033"
If I click advanced View advanced options for system recovery and support, I get a list of things to do.System Restore and System Image Recovery have no restore points. The Windows Memory Diagnostic comes up with nothing. I do have access to the Command Prompt.
View 5 Replies
View Related
Apr 7, 2011
I have a toshiba laptop that runs windows 7 32bit home premium and it is not booting properly. When I turn it on t will show the microsoft logo and says "starting windows" but never gets past that point. I have tried all the fixes to no avail including, safe mode (will not boot into safe mode..starts to load but stops at drivers/atipcie.sys and sits there for a minute or two and goes to the repair startup recommended screen. I have tried startup repair and done it many times because I have read it can take several times (it says "startup repair cannot repair this computer automatically") I have tried the windows repair disc using system restore but it says no restore points found, even though i know they are on my computer. All of my school files are on this computer and while I have some of there backed up on a external hard drive there are some more recent files that are not. What can I try without a clean install to try and repair this?
View 2 Replies
View Related
May 27, 2012
Today, my HP pavilion dv7 laptop thats running on Windows 7 64 bit will not start. It was acting a little slow and then it completely froze and shut down. When i turned it on again it when to the starting windows screen and the windows logo never came and it went right into a startup repair.
View 6 Replies
View Related
Feb 19, 2012
Basically the issue is that my computer won't boot. I have had it for just over a year and have never had any issues with it. It's protected and isn't used for anything dodgy, my brother uses it for SWTOR and I use it mostly for uni work and a bit of gaming here and there. Anyway out of nowhere it failed to start. Its done this once before and last time I just told it start Windows normally and everything was fine. This time not so much.
It loads up Startup Repair even if I select start Windows normally as it fails to do so and restarts itself automatically. I left it to detect errors but when I checked it a few hours later it still said searching so I cancelled and left it. I tried again yesterday and have left it on for approximately 25 hours to no avail, it still says searching! I have a lot of stuff I haven't backed up so I want to save it. Also note that there are no pieces of hardware plugged into the machine at all, only the mouse, keyboard and monitor.
Basic Info :-
Acer
Windows 7 x64
8 GB Ram
500GB HDD
NVIDIA G Force 950
View 3 Replies
View Related
Dec 14, 2012
windows 7 startup repair on every boot but after startup repair hibernate works. How to fix?
View 1 Replies
View Related
May 11, 2011
I am pretty sure that a virus cause this, right before my computer shut down on it's own my anti virus popped up and said that a Trojan was found but I didn't have to do anything. Then the computer shut down and when it restartrd started to load files and then go into startup repair, only it couldn't fix it. I tried a restore, but again it said that the startup files wern't there. I just quickly scanned the diagnostic details and noticed something that said "boot critical file C:CI.dll is corrupt".
View 8 Replies
View Related
Oct 5, 2012
I cannot get my computer to restart. It tries to restart but keeps saying that startup repair cannot repair computer automatically. I try to do a system restore but it won't let me do that either
View 1 Replies
View Related
Mar 24, 2012
On start up a black and white gateway screen flashes followed by a startup Repair window.This gives me a pop up that says Startup Repair cannot repair this computer automatically.There is the option of sending the information to microsoft or viewing problem details.When looking at the details, Problem Signature:Problem Event Name:StartupRepairOfflineProblem Signature 01:6.1.7600.16385Problem Signature 02:6.1.7600.16385Problem Signature 03:unknownProblem Signature 04: 21200290Problem Signature 05:AutoFailoverProblem Signature 06:11Problem Signature 07: CorruptFileOS Version:6.1.7601.2.1.0.256.1Locale ID:1033Underneath the pop up box, The startup Repair window says WIndows cannot repair this computer automaticallywith the option of viewing diagmostic repair details or viewing advanced options for system recovery and support Under the advanced options, I have tried the startup repair, the system restore, the command promptchkdsk/f/rNone of which have worked Prior to this the notebook was working fine last night, I did not install anythingI ran the Farbar Recovery Scan ToolMod Edit: Removed FRST data, this is a malware tool not permitted in this forum and you have made no indication that this is a malware situation ~ Hamluis.
View 7 Replies
View Related
Jul 31, 2010
Start up repair cannot repair this computer automatically , I am getting this all of the time now when starting the PC ,i am sure it started when a new video card got put in but not sure?
View 2 Replies
View Related
Mar 10, 2011
I have no idea what was the last thing done on this computer (it is my wifes), but I do know that every now and then there has been a disc failure, checking disc startup, but it has always had a positive outcome.[CODE]
View 4 Replies
View Related
Jul 24, 2012
i use ubuntu OS and windows7 professional on an HP dv5 notebook, last week i made a mistake in that i removed the battery while the machine was on as i was using windows7. the time i tried to restart it again it recommended startup repair which ran but 'could not repair it automatically' i tried the f8 options but to no avail. when i run scan and memory diagnostics all are successful but the system can still boot. am able to view my data on windows through ubuntu but ubuntu can't execute windows programs. what should i do to restore windows without loosing data?
View 5 Replies
View Related
Aug 8, 2012
Hardware Information (This is from memory and may not be completely accurate):The computer model is emachines The processor is a dual core Intel Pentium The graphics card is NVIDIA (Can't remember the model.)4GB of RAM installed Software Information (Also from memory, but this is likely to be more accurate than the hardware.): Windows 7 Home Premium 64bit Antivirus software is Comodo Internet Security - Also the firewall (product information).I often used Advanced System Care for optimization.-product information.after searching the internet for ways to fix my problem for the past three days, I'm at a complete loss. I was told by a professional that my registry was likely corrupted and that my best bet would be to re-install Windows entirely. I was hoping it wouldn't come to that, but was prepared nonetheless.So I inserted the installation disk, and wouldn't you know it, the installer wouldn't recognize my hard drive (BIOS recognizes it though). Searching for reasons why this was happening only turned up people saying to make sure it was recognized by BIOS, which I considered a no brainier. When it still didn't work for people in certain threads, they were told to try wiping their hard drives. I've done it. Windows still doesn't want to notice my hard drive.After that, I decided to try and install Windows to an external hard drive. I know this isn't how Windows was designed, and I knew it wasn't how Windows was meant to be used, but I was (to my knowledge) out of other options (Also, the external hard drive has 1 TB of space on it, so I wasn't concerned about speed loss). So, I searched for ways to do that, and I came across PWboot. The first half of the installation worked, the second half did not. I began getting an error that read (bootmgr is missing press ctrlalt+delete to reboot.) Which I did. But that didn't fix anything. So I tried the entire process again, and it didn't work.The "Repair your computer" feature in the windows install disk turned up nothing as well. I can't "Factory Reset" because it can't detect any installation of windows, the startup repair function can't "repair this computer automatically", and none of the other options will even open (with the exception of the command prompt, but most of the commands aren't valid for some reason.)
View 9 Replies
View Related
Jun 4, 2012
I've been having trouble trying to get my computer to boot; I'd noticed a drop in performance (still unsure why) so decided to boot up in safe mode and poke around - it was not my original intention to install AC 5.3.0 but somehow it happened. I ran the 'deep-care' utility and everything was working fine, my computer rebooted and performed a disk check: there weren't any errors that I can remember apart from [something along the lines of] 60 reparse files. Following this my computer restarted and Windows failed to load, restarting to show me startup repair - this isn't the first time this has happened, a similar thing occurred following previous attempts at boosting speed, though before I was able to get Windows up and running using an Ubuntu installation disk... still don't understand why - no need to say that it didn't work this time. Startup repair refuses to work and my system restore points have vanished; I would try doing a repair install if I had a copy of the disk. I built the computer myself a few months back, borrowing a Windows 7 installation disk from a friend (who has now conveniently lost said disk), startup repair does tell me something about 'Problem Signatures'. [code]
View 2 Replies
View Related
Dec 26, 2012
Recently my computer has been randomly just giving me the BSOD. Normally this problem was resolved by a simple restart but tonight about an hour before I posted this, the blue screen sent me back to startup but instead of giving me the usual "Security mode" and Regular Startup. It gave me Startup Repair and normal startup. After clicking normal startup just to see if it would correct itself like normal,my pc instantly BSOD'd, bringing me back to my two options. I've been sitting here staring at the startup repair screen for about an hour now.
View 2 Replies
View Related
Feb 11, 2013
I have a pavillion dv6- laptop that's stopped being able to boot up windows? It only goes to the screen with the option of starting windows normally (which brings me back to the same screen) or going to startup repair. When I go to repair it says Got some important data in c drive can't install new windows all data will wipe up what to do now?
View 3 Replies
View Related
May 24, 2009
I used windows update and updated my nividia 9600 drivers and now for the past couple days I have been unable to reach my desktop. It boots to startup repair and does a short scan then finally says it was unable to help will either shut down, restart or scan again. I've DL'd a vista repair to restore but it doesn't have any restore points and I was able to get onto a DE language linux version of my computer but haven't been able to fix it there, partly cus i cant read most of what im seeing.
View 9 Replies
View Related
Dec 26, 2011
I get into startup repair everytime i boot my pc which is never successful. I am definitely goin to explain it in detail but dis is basic problem nd plz dont mind typing coz m typing fast on iphone which may cause errors in typing!Yesterday,i used my pc for 7-8 hrs continuosly which is not big deal but due to it i can't figure out my action which caused problem. I kept it on for downloading at night nd when in morning i got boot screen which comes when pc is directly turned off. I did Start Windows Normally nd i got usual windows 7 loading animation for a secong nd den it started startup repair after that everytime i boot it takes me to startup repair resulting in continuos failure. I hv googled nd found many threads but none matched my exact one. Startup infinity loop didn't work. Below r given few conclusions nd obstacles-1.) i can't get into advanced boot options using F8. But i can get into recovery menu using install dvd nd view advanced options frm startup repair.
2.) System restore din't work. I mean its not successful in restoring.3.) bootrec.exe didnt work4.) imp point to be noted is my last update was on 23 dec while pc worked fine on 24 th & 25th dec means dont knw wat happened 25th night that caused this problem on 26th morning.5.) sfc/scannow says "a startup repair is left to be completed." it says to complete that first then use sfc/scannow.6.) chkdsk results in last line saying failed to transfer log......7.) i also get a report like many others about that problem signature.8.) repair install not possible coz windows can't start only.9.)i hv made a backup using cmd but is there any way without clean install?
View 4 Replies
View Related
Apr 27, 2011
My OS is Windows 7 Ultimate x64 and its boot by vhd.
One day, it failed to go to Windows and stuck at Startup Repair. I think it was caused by invalid driver.
But anyway, my concern is the Startup repair is unable to repair a Windows that is installed in a vhd. Then what should I gonna to do?
View 1 Replies
View Related
Mar 16, 2011
So yesterday I added another hard drive to my computer. I now have 2 SATA hard drives running in my machine. I used the disk managment, and the 2nd hard drive is working as it should.
However, when I shut down my computer and turned it back on, Windows will boot to the Startup Repair screen every time. I checked the BIOS and made sure the boot order was correct, and even took the 2nd hard drive off the boot order in order to make sure it wasn't causing any issues. It's pretty annoying, because every time I start up, I have to wait for the whole repair process before it will load normally. Each time it always says that there are no repairs that could be made.
I also am not able to put my computer in sleep mode any longer. I believe my BIOS setting is set to S1, and before I never had any problems. I would put my comp to sleep and everything would be fine. After the 2nd hard drive, my monitor will turn off and it sounds like 1 of the hard drives turns off, but the CPU and fan are still running and it does not completely go to sleep.
View 4 Replies
View Related
Oct 21, 2012
I've got two hard drives with Windows 7 on it. One of them, the operating system crashed entirely, on the other, it's a perfect copy of how the other hard drive was at factory settings (drivers and all). Now, you're probably wondering, hey, why not use the other hard drive? Thing is, I'm trying to save / keep all the programs on the first hard drive in order to save myself the hassle from 1) pretending I'll find / looking for the disks that I know I don't have and 2) the time it'd take to install them.the machine was *not* giving me anything except sending me over to start up repair, stating that it couldn't fix the problem. I used the other hard drive to boot into Windows, and was hoping to do a repair option on the other hard drive. Unfortunately, I don't think that's entirely possible. I used Hirens Boot CD to check out the System32 / Syswow64 folders, and there was hardly anything in there. So, naturally, started copying off certain sub folders from one to the other. Now, I can get it to attempt to boot / it sees the partition / I go to safe mode, and it hits Classpnp.sys for a split second, then startup repair. Startup repair let's me see that there is one root cause, but, after doing its thing, says that it didn't detect an issue with the startup.
1x Sony Vaio laptop 2x Hard drives (one with a factory restored image on it, another one that won't boot into the OS)The hard drive that I need to boot from / one that has my programs goes to Startup Repair after hitting Classpnp.sys in Safe Mode Startup repair has one thing fail (StartupRepairOffline issue), but says it didn't detect a problem / everything booted fine afterwards Attempted to rebuild the BCD (after successful fixmbr / fixboot), but it states it sees 0 installations of windows. However, I have a Windows 7 retail disk that sees the installation folder.
View 4 Replies
View Related
Jan 31, 2010
my computer keeps going to startup repair. I have tried to start in safe mode, last known configuration,start normally. i have also tried to change the bios and boot from a disc but nothings working so please I need help urgently!
View 3 Replies
View Related
Jul 21, 2012
I have searched on this forum and Google to see if others are having the same issue. After updating Windows last week, my computer has been in a consistent state of decline. Today, I powered the CPU down and it will not start-up again. I have attempted to use the windows repair disc, but am now told that startup repair cannot fix my problem.
View 4 Replies
View Related
Sep 25, 2012
My computer closed down when i started it i got the message start up repair cannot repair this computer automatically. My details are Acer 3812 win 7 no windows start up disc or original windows 7 microsoft disc. Im told best get a new computer as it won't reboot.
View 8 Replies
View Related
Nov 8, 2012
my computer keeps going back to startup repair...
View 4 Replies
View Related
Feb 3, 2012
I have a Toshiba Satellite C655-S5132 that just shut down & now will not boot Windows 7. Just goes to black screen w/blinking cursor then goes to 'startup repair' (which I'm postiive this is a virus of somekind) & will not allow me to do anything. Just repeats itself. I downloaded Windows 7 repair to a CD-R, chgd BIOS settings to CD/DVD to boot first, saved changes, and will NOT pull/boot up from disc. I've tried 2diff repair discs, both do not work. 'F8' does not do anything for me, not able to get to 'safe mode'. Computer is only 2yrs old.
View 9 Replies
View Related
Nov 27, 2010
with my custom built desktop. My custom built has been acting up like mad only a month after creation. It worked perfectly at first, but then I suddenly found that half of my services were disabled randomly. As well, my computer kept connecting with limited access to my household wireless connection, quite simply meaning I couldn't connect to the internet.Eventually, after throwing all the solutions I could find on the net at it (sfc/scannow, system restore, enabling the systems manually through and elevated control panel and even upgrade installs (with the original OEM system builders disc), I gave up and did a complete reinstall, wiping everything on my hard drive and starting again.Unlike the upgrade install I attempted, this actually worked and my computer worked perfectly...until I updated windows. After downloading the 53 updates windows update thought I needed, when I booted up my computer the next time, the internet stopped working again, with half of my services stopped (including Diagnostics Repair).Now every time I boot up my computer, I come to a Startup Repair screen that fails every time.Here is the message I get: Startup Repair cannot repair this computer automaticallyProblem signature:Problem Event Name:StartupRepairOfflineProblem Signature 01:6.1.7600.16385Problem Signature 02: 6.1.7600.16385Problem Signature 03: unknownProblem Signature 04: 21200686Problem Signature 05: AutoFailoverProblem Signature 06: 3
View 9 Replies
View Related
Dec 20, 2011
1 year back I upgraded vista to windows 7 Home premium.3 days back I had problem - my starting windows page was hanged and was not proceeding forward, also All types of safe mode was getting stuck on classpnp.sys.After reading many forums I booted with USB (mounted with windows 7) and used command prompt and deleted all "pcmcia" realted files from C drive. Now using F8 function I can't use any option (all option safe mode, low resolution, startup repair,etc won't work, even changes in Bios setting won't work). Also now while booting my PC with USB, after starting windows page, black screen appears with white arrow and it won't go further this black screen so now I can't even use command prompt & Installation option
View 9 Replies
View Related
Sep 21, 2012
I've had an ongoing war with my PC for four days now. I have Windows 7 and it refuses to start up. Originally I tried starting up normal, it gave me two choices: system repair or start as normal. If I chose normal it would show the windows logo then reset. If I chose repair it would turn black for several minutes, then go to a blue screen for several minutes and wouldn't move past that. So i tried to boot from CD. I have the option of installing windows or repair. I chose repair, once again it goes to the blue screen and nothing happens (and I've left it on this blue screen a good 15 min mind you.) Finally I submitted and decided to just re-install windows. it goes to the starting setup... and sits there indefinably.
View 5 Replies
View Related
Dec 2, 2012
I tried turning on my computer today and it gets stuck at the "Starting Windows" logo. It just hangs there indefinitely (usually only takes a couple seconds) and doesn't load. I then tried startup repair, and that just takes me to a black screen. After that, I tried putting in my Windows 7 boot disc to do a clean install, told the BIOS to boot to CD/DVD drive. It tells me to press a key, I do. I get "Windows is loading files" and then it goes back to "Starting Windows" forever, yet again. This happened so suddenly, it was working fine just hours before this.
View 3 Replies
View Related
Dec 1, 2011
Anyway, anytime my Sony Vaio computer isn't shut down properly, or the screen times out due to inactivity, it will show a screen that says "windows is loading files" and then proceeds to do a start up repair in which it will try to restore my device to a previous setting (or something like that). When i first got this computer, as with my previous HP, I could close the lid..no harm no foul. After having this one for a month it started doing this out of nowhere.
View 4 Replies
View Related
