Computer Does Startup Repair If Not Shutdown Properly
Dec 1, 2011
Anyway, anytime my Sony Vaio computer isn't shut down properly, or the screen times out due to inactivity, it will show a screen that says "windows is loading files" and then proceeds to do a start up repair in which it will try to restore my device to a previous setting (or something like that). When i first got this computer, as with my previous HP, I could close the lid..no harm no foul. After having this one for a month it started doing this out of nowhere.
I have a Dell Inspiron and a while ago I shut down my PC and the next morning I was faced with options to repair my computer. It hung on the screen for ages before it actually came up with startup repair and supposedly fixed the problem. A few days later, everything got very slow and started to freeze a lot and before long, booting the computer got very slow as well as it hung for about ten minutes on a black screen after the 'welcome' screen before finally starting up. I decided to reinstall the operating system (I did NOT reformat the C drive), so I borrowed my Grandma's external hard drive and copied my files. After reinstalling using a Dell Windows 7 64-bit Home Premium Re-Installation DVD, I copied and deleted the files off the external hard drive onto my PC (I didn't know it would create a Windows.old folder) and started installing programs. Then I left it overnight to install quite a big program. This morning, somehow it had turned off. I turned it on and it gave me the safe mode options and a 'start windows normally' option. I chose the latter and after typing my password it hung on the welcome screen again. I left it for ages and it just went back to the user login screen again. I pressed the red button in the corner to shut it down but it just hung once again on an empty screen so I did a hard shutdown (held down the power button). I turned it on again...startup repair. It gave me the option for system restore, which I did (then realising when it finished that I hadn't made a backup). I booted it, and again it wouldn't start properly. At this time, safe mode booted fine. After trying various things (even using a compressed air can to get rid of dust) and a few hard shutdowns, suddenly every option from the advanced boot menu took me to startup repair except 'Repair your Computer' which gave the normal options for repair (although now it only gives me 2, Startup Repair and DataSafe Restore and Emergency Backup. Now when I do startup repair, some times it says it has fixed the problem, and sometimes it says it cannot be fixed automatically and gives me information on the problem (a few things it said were: 'StartupRepairOffline', 'AutoFailover' and 'CorruptRegistry').
I can't reinstall my computer because then I would lose my precious files.
Is there some way I can save my files and reinstall or even just save my files somehow or am I screwed?
I am pretty sure that a virus cause this, right before my computer shut down on it's own my anti virus popped up and said that a Trojan was found but I didn't have to do anything. Then the computer shut down and when it restartrd started to load files and then go into startup repair, only it couldn't fix it. I tried a restore, but again it said that the startup files wern't there. I just quickly scanned the diagnostic details and noticed something that said "boot critical file C:CI.dll is corrupt".
I cannot get my computer to restart. It tries to restart but keeps saying that startup repair cannot repair computer automatically. I try to do a system restore but it won't let me do that either
On start up a black and white gateway screen flashes followed by a startup Repair window.This gives me a pop up that says Startup Repair cannot repair this computer automatically.There is the option of sending the information to microsoft or viewing problem details.When looking at the details, Problem Signature:Problem Event Name:StartupRepairOfflineProblem Signature 01:6.1.7600.16385Problem Signature 02:6.1.7600.16385Problem Signature 03:unknownProblem Signature 04: 21200290Problem Signature 05:AutoFailoverProblem Signature 06:11Problem Signature 07: CorruptFileOS Version:6.1.7601.2.1.0.256.1Locale ID:1033Underneath the pop up box, The startup Repair window says WIndows cannot repair this computer automaticallywith the option of viewing diagmostic repair details or viewing advanced options for system recovery and support Under the advanced options, I have tried the startup repair, the system restore, the command promptchkdsk/f/rNone of which have worked Prior to this the notebook was working fine last night, I did not install anythingI ran the Farbar Recovery Scan ToolMod Edit: Removed FRST data, this is a malware tool not permitted in this forum and you have made no indication that this is a malware situation ~ Hamluis.
Start up repair cannot repair this computer automatically , I am getting this all of the time now when starting the PC ,i am sure it started when a new video card got put in but not sure?
I have no idea what was the last thing done on this computer (it is my wifes), but I do know that every now and then there has been a disc failure, checking disc startup, but it has always had a positive outcome.[CODE]
i use ubuntu OS and windows7 professional on an HP dv5 notebook, last week i made a mistake in that i removed the battery while the machine was on as i was using windows7. the time i tried to restart it again it recommended startup repair which ran but 'could not repair it automatically' i tried the f8 options but to no avail. when i run scan and memory diagnostics all are successful but the system can still boot. am able to view my data on windows through ubuntu but ubuntu can't execute windows programs. what should i do to restore windows without loosing data?
my computer keeps going to startup repair. I have tried to start in safe mode, last known configuration,start normally. i have also tried to change the bios and boot from a disc but nothings working so please I need help urgently!
My computer closed down when i started it i got the message start up repair cannot repair this computer automatically. My details are Acer 3812 win 7 no windows start up disc or original windows 7 microsoft disc. Im told best get a new computer as it won't reboot.
When I start up my computer, It shows the DELL logo. Then, it shows a grey bar that spans the screen saying "Windows is loading files..." Next a green bar that says: "Microsoft Corporation" Startup repair automatically starts. It runs for a little while and then it says:
"Startup Repair cannot repair cannot repair this computer automatically ->Send information about this problem (recommended) ->Dont Send [V] View problem details"
The problem details are:
"Problem signature: Problem Event Name: StartupRepairOffline Problem Signature 01: 6.1.7600.16385 Problem Signature 02: 6.1.7600.16385 Problem Signature 03: unknown Problem Signature 04: 21200906 Problem Signature 05: AutoFailover Problem Signature 06: 14 Problem Signature 07: CorruptFile OS Version: 6.1.7600.2.0.0.256.1 Locale ID: 1033"
If I click advanced View advanced options for system recovery and support, I get a list of things to do.System Restore and System Image Recovery have no restore points. The Windows Memory Diagnostic comes up with nothing. I do have access to the Command Prompt.
I'm not sure if this is the right place to post this, but recently on my girlfriends computer we installed a webcam and everything kinda froze. Upon restarting the computer it comes up with the screen saying a device failed and may need a startup repair. Also gives the option to start windows normally. The problem is the keyboard is not recognized to choose an option. It counts down and goes to the screen to start the startup repair, but again no mouse or keyboard. I have tried accessing the BIOS but considering the keyboard is not working i cannot do that either. I'm not sure what all is in it as I got it from a friend when he built a new one. It is a custom computer, not from a typical manufacturer. It has worked perfectly up until trying to install the webcam. I have tried using every USB port and also tried using a ps/2 converter to no avail. I'm not sure what to do anymore, and I'm afraid of messing with it too much or hard-booting it too much.
Okay, so I woke up my computer from sleep mode yesterday, and it worked perfectly fine for all of five minutes before everything except my cursor froze. I waited for it to unfreeze or give me a "not responding" message for about twenty minutes, but when it didn't, I manually shut it down by pressing the power button, since I couldn't get to the start menu. But when I turned it back on, an error message appeared. I don't remember exactly what it said, but it gave me the option to either: "Launch startup repair (reccomended)" or "Start Windows normally". So I chose to launch the startup repair since it said that it would fix anything that had caused my computer to stop working, but it's been "searching for problems" for about five hours now! The blue bar just keeps scrolling past, but other than that, nothing's happening. Does anyone know how to fix this? Or should I call someone to check it out? Will I lose my files? I tried to "Start Windows normally" as well, but nothing happened at all... Oh, and it's an Acer laptop with Windows 7 on it
every time i turn on my laptop, a startup repair window pops up and then when it's done solving the problems it shuts down. when i try opening it again the startup window appears.
Recently my desktop has started having issues. I purchased it new in january and within this last month when I start it, it gets stuck in the startup screen. When I try to do startup repair it always is unsuccessful. When I view the details it lists this "problem signature 07: Bad patch" I have tried doing a system restore to every point it lists and it says "the instruction at 0xfba8ca53 referenced memory at 0x06e2f90f. The memory could not be read. Click ok to terminate". When I try to enter safe mode it doesn't work either.
I have a toshiba laptop that runs windows 7 32bit home premium and it is not booting properly. When I turn it on t will show the microsoft logo and says "starting windows" but never gets past that point. I have tried all the fixes to no avail including, safe mode (will not boot into safe mode..starts to load but stops at drivers/atipcie.sys and sits there for a minute or two and goes to the repair startup recommended screen. I have tried startup repair and done it many times because I have read it can take several times (it says "startup repair cannot repair this computer automatically") I have tried the windows repair disc using system restore but it says no restore points found, even though i know they are on my computer. All of my school files are on this computer and while I have some of there backed up on a external hard drive there are some more recent files that are not. What can I try without a clean install to try and repair this?
Today, my HP pavilion dv7 laptop thats running on Windows 7 64 bit will not start. It was acting a little slow and then it completely froze and shut down. When i turned it on again it when to the starting windows screen and the windows logo never came and it went right into a startup repair.
Basically the issue is that my computer won't boot. I have had it for just over a year and have never had any issues with it. It's protected and isn't used for anything dodgy, my brother uses it for SWTOR and I use it mostly for uni work and a bit of gaming here and there. Anyway out of nowhere it failed to start. Its done this once before and last time I just told it start Windows normally and everything was fine. This time not so much.
It loads up Startup Repair even if I select start Windows normally as it fails to do so and restarts itself automatically. I left it to detect errors but when I checked it a few hours later it still said searching so I cancelled and left it. I tried again yesterday and have left it on for approximately 25 hours to no avail, it still says searching! I have a lot of stuff I haven't backed up so I want to save it. Also note that there are no pieces of hardware plugged into the machine at all, only the mouse, keyboard and monitor.
Basic Info :- Acer Windows 7 x64 8 GB Ram 500GB HDD NVIDIA G Force 950
Windows 7 home premium Dell Studio XPS 1645 I7 1.73 GHZ 6 GB DDR3 500 GB Toshiba
I have had this computer for just over a year and it has ran like a top. I was surfing the internet last night when it just shuts off (no slow down no blue screen) and boots into startup repair. It would not repair, just sat in there forever and would not boot into safe mode or anything. It just kept booting into startup repair for hours.
So I hit esc when it booted to startup repair, I go to the dell backup and restore, save my work documents and pics and let it boot to factory fresh windows install from the dell created partition. Windows reinstalls and loads fine, boots in and begins to update successfully and then reboots back into repair. This happens everytime it reboots. After sometime it will boot into windows fine. If I restart I am back into startup repair for half an hour or more.
yesterday i was watching a show on my computer (sony vaio) and it kept freezing and lagging and wouldn't restart so i manually restarted it. when i tried to turn it on it would say "starting up windows" but it would take to long and it would restart again with error repair. when i would load error repair it would say it's loading files but only a background screen would show and no files.
I recently got a virus 2 days ago. It disable my possibilities from accessing any program or internet. I made a mistake by downloading a windows something ware to boot up security. It then crash...so I went to task manager didnt work, which i then went to search and entered msconfig. I then chose safe mode in minimal services. It then says loading files. U see a black screen with thite letters of the files being loaded. Then u see ur mouse cursor, and then it boots up again and same process. So I tried launch startup repair, it launches a repair, but it says it startup cannot repair this computer automactically. I then result into going to tapping f8..it goes to the screen of advanced options. Problem is if i try safe mode it will crash. I dont have a backup, and i dont want to lose my movies of over 700 gigs.
I'm having problems with windows starting upon my PC, however, it only occurs intermittently, but seems more frequent now. When booting, the windows spiral begins then stops, and it reboots to the screen to choose startup repair or start windows normally. If I do startup repair, it doesn't find anything to repair, and reboot usually works fine. If I choose Start Windows Normally, 75% of the time if works fine. When the computer runs, it's fine and everything seems to run normally, I don't get blue screens or other issues. I'm not sure where to find any recorded errors to get more specifics.
System: Win 7 professional (upgraded from Home) 64bit Gigabyte GA-H67MA-UD2H-B3 motherboard Intel Core i5-2500 3.3GHz processor 8GB Ram (2x4gb) Seagate 1TB hard drive (system drive) 3TB hard drive (data drive)
i shutdown my pc properly via the shutdown button in start menu... but when i check my reliability monitor it says windows was not shutdown properly. it doesnt happen everytime i shutdown but seems to happen randomly every now and then.
I seem to be getting this message and the prompt to boot into safe mode everytime I startup or reboot. Everything seems to be shutting down normally. This wouldn't be a big deal except for the fact that it seems to be loading an old system restore point whenever it does this. I don't know for sure if these 2 issues are connected. I first started getting the "Windows didn't shutdown properly" prompt after I had to do a reset of my computer during a total lock. I can't say for sure if the system restore point issue began when I first saw this as I don't shutdown my computer very often.
Ever since I bought my new computer and installed Windows 7 64 bit Pro I have noticed that sometimes when I start my computer the startup locks up or crashes, requiring me to restart or it takes me to the system repair screen and running this process does nothing.
Windows 7 ultimate 64 bit..THe problem is that my Laptop doesnt shut down properly..When i shut down the laptop screen shown only logoff . finally have to manually turn it off .This only happens like every other time.All drivers are up to date, all Windows Updates are done. System specs:
emachines by acer D725 laptop intel dual core emachines mother board RAM 2GB DDR2 Hard Disk 250GB Windows 7 ultimate 64bit
