Computer Getting Stuck At Startup Screen - Repair Unsuccessful
Jun 2, 2011
Recently my desktop has started having issues. I purchased it new in january and within this last month when I start it, it gets stuck in the startup screen. When I try to do startup repair it always is unsuccessful. When I view the details it lists this "problem signature 07: Bad patch" I have tried doing a system restore to every point it lists and it says "the instruction at 0xfba8ca53 referenced memory at 0x06e2f90f. The memory could not be read. Click ok to terminate". When I try to enter safe mode it doesn't work either.
My granddaughter has a laptop with Windows 7 pre-installed. I went to turn it on after charging it and the Startup Repair window comes up. I can't get any System Repair options except for Startup Repair which can not repair the computer automatically. This is the problem details listed:
I don't have much information on this laptop since we are on vacation. The only thing my daughter told me was that Windows was preinstalled. The laptop is ASUS.
Before I start this happened after updating the motherboard BIOS from version 1.4 to 1.7, I went to 1.6 after just in case the latest BIOS had a bug
I've been stuck on the startup repair for almost 5 hours saying that it's repairing my hard drive or whatever (i forget exactly what it said), I first booted linux to check the SMART data on the HDD (i now know that I can do it with HBCD too) it came back all fine. I am now running Hirens Boot CD and DRevitalise to scan and repair bad sectors.
Okay, so I woke up my computer from sleep mode yesterday, and it worked perfectly fine for all of five minutes before everything except my cursor froze. I waited for it to unfreeze or give me a "not responding" message for about twenty minutes, but when it didn't, I manually shut it down by pressing the power button, since I couldn't get to the start menu. But when I turned it back on, an error message appeared. I don't remember exactly what it said, but it gave me the option to either: "Launch startup repair (reccomended)" or "Start Windows normally". So I chose to launch the startup repair since it said that it would fix anything that had caused my computer to stop working, but it's been "searching for problems" for about five hours now! The blue bar just keeps scrolling past, but other than that, nothing's happening. Does anyone know how to fix this? Or should I call someone to check it out? Will I lose my files? I tried to "Start Windows normally" as well, but nothing happened at all... Oh, and it's an Acer laptop with Windows 7 on it
I have a Dell Inspiron and a while ago I shut down my PC and the next morning I was faced with options to repair my computer. It hung on the screen for ages before it actually came up with startup repair and supposedly fixed the problem. A few days later, everything got very slow and started to freeze a lot and before long, booting the computer got very slow as well as it hung for about ten minutes on a black screen after the 'welcome' screen before finally starting up. I decided to reinstall the operating system (I did NOT reformat the C drive), so I borrowed my Grandma's external hard drive and copied my files. After reinstalling using a Dell Windows 7 64-bit Home Premium Re-Installation DVD, I copied and deleted the files off the external hard drive onto my PC (I didn't know it would create a Windows.old folder) and started installing programs. Then I left it overnight to install quite a big program. This morning, somehow it had turned off. I turned it on and it gave me the safe mode options and a 'start windows normally' option. I chose the latter and after typing my password it hung on the welcome screen again. I left it for ages and it just went back to the user login screen again. I pressed the red button in the corner to shut it down but it just hung once again on an empty screen so I did a hard shutdown (held down the power button). I turned it on again...startup repair. It gave me the option for system restore, which I did (then realising when it finished that I hadn't made a backup). I booted it, and again it wouldn't start properly. At this time, safe mode booted fine. After trying various things (even using a compressed air can to get rid of dust) and a few hard shutdowns, suddenly every option from the advanced boot menu took me to startup repair except 'Repair your Computer' which gave the normal options for repair (although now it only gives me 2, Startup Repair and DataSafe Restore and Emergency Backup. Now when I do startup repair, some times it says it has fixed the problem, and sometimes it says it cannot be fixed automatically and gives me information on the problem (a few things it said were: 'StartupRepairOffline', 'AutoFailover' and 'CorruptRegistry').
I can't reinstall my computer because then I would lose my precious files.
Is there some way I can save my files and reinstall or even just save my files somehow or am I screwed?
I have a Sony Vaio laptop which is only a few months old. Here is the problem: i was trying to uninstall the trial version of office 2010 (after failing to activate it properly) and after going into control panel and clicking on "uninstall" to remove the office 2010 software, the computer automatically shut down and restarted and went into startup repair. after running this a couple of times, it said it was unable to fix the problems and asked to send the report to microsoft. then it just shut off by itself. i turned it back on and chose to "start windows normally." even then it went into startup repair and was again unable to fix the problems. then it just became stuck with a blank screen so i had to force power off. now i am not sure what to do. i don't want to keep restarting it only to go into startup repair and burn something out by turning it on and off so frequently.
I left the computer on for the evening and returned to it this morning only to find the Startup Repair Tool. I have attempt a number of different reboot attempts to no avail. Using F8 during start-up is not being recognized so I cannot boot up in Safe ModeHere is the Startup Up Repair Tools Readout:[CODE]
I am having a problem with windows 7, when i start the computer it says loading files and then goes directly to startup repair. I cant even get into the computer in safe mode or anything else by pressing f8 when istartup. It just keeps on this startup repair loop.Its states startup repair checking for problems, it attempts repairs but then it says it cant repair this computer automatically. I have tried system restore, sytem image recovery and tried to restore the computer to its factory state. when i try that i get a error 0x4001001300001002. I didnt get any recovery disks when i bought the computer either.
I have a Dell Inspiron N4010 running Windows 7. Last night I was printing off PDF files and listening to a CD when the song that was playing got stuck and the print job I'd just ordered stalled. Then a horrible, loud, relentless sort of whirring noise came out of the speakers and wouldn't stop and the computer was completely unresponsive. This has happened before, last December, and I did what I did then...I just forcibly shut it down. When I started it back up, I could choose between starting normally or running Startup Repair, which was recommended. I swear I chose to start normally, but I can't be totally sure. I walked out of the room to do a couple things and when I went back I saw Startup Repair running and it said it could take over an hour. I had to leave for work in 20 minutes, so I decided to just leave it on. 9 hours later, when I got home, it was STILL going. I tried to cancel, and was informed that the current operation could not be canceled. I forced a shut down again (maybe not the brightest thing but I couldn't think of anything else) and even disconnected the battery. Then I started it up...got the same choice and chose to start Windows...and Startup Repair started again. I managed to cancel and shut down with the OFF button again. Restarted and chose Windows...same thing. Restarted and chose Setup Repair, same result. I cannot do or open anything. I don't know if putting the startup discs in it would even register...and I'm not sure I even have any, as Windows 7 came pre-installed. I haven't backed up my hard drive in a loooong time and I can't afford a new machine.
Everytime I start my computer it goes into startup repair searching for problems. I tried going to F8 into safe mode but it goes bac to searching for problems in statup repair. Is there any way I can bypass it from going to startup repair page and go into windows.
my problem is rather odd (or at least I haven't seen it before). Whenever I boot up the netbook it goes right into startup repair, without the option to cancel it, even if I try to start windows in safe mode (or any other startup options for that matter), the system launches the startup repair.The repair itself runs fine (doesn't freeze or antyhing like that), however it is never able to fix the issue ("Startup Repair is unable to repair this computer automatically").
The problem details read as follows:
Problem signature: Problem event name: StartupRepairOffline Problem signature01: 0.0.0.0 Problem signature02: 6.1.7600.16385 Problem signature03: unknown Problem signature04: 6
So, I'm not exactly sure what I did. I was clearing up some space on my computer after using the Norton Removal Tool to get rid of this Norton trial popup that came up everytime I booted my computer. Now, after it told me to restart, it seems to be stuck in an endless boot cycle that resets itself after showing the Windows logo. I've since tried running startup repair, which freezes as it shows the progress bar for 'Windows is loading files'. Safe mode will not work, either. It just sends it back into the boot cycle. Not sure what to do at this point. My computer came pre-installed with Windows 7 Home Premium 64bit, so I don't have any startup discs.
I am pretty sure that a virus cause this, right before my computer shut down on it's own my anti virus popped up and said that a Trojan was found but I didn't have to do anything. Then the computer shut down and when it restartrd started to load files and then go into startup repair, only it couldn't fix it. I tried a restore, but again it said that the startup files wern't there. I just quickly scanned the diagnostic details and noticed something that said "boot critical file C:CI.dll is corrupt".
When i do system repair it comes up with a cmd saying im missing files or something i will post pics if needed.I tried running a program that SIW2 gave to me with the cd and idk what to do.
I cannot get my computer to restart. It tries to restart but keeps saying that startup repair cannot repair computer automatically. I try to do a system restore but it won't let me do that either
On start up a black and white gateway screen flashes followed by a startup Repair window.This gives me a pop up that says Startup Repair cannot repair this computer automatically.There is the option of sending the information to microsoft or viewing problem details.When looking at the details, Problem Signature:Problem Event Name:StartupRepairOfflineProblem Signature 01:6.1.7600.16385Problem Signature 02:6.1.7600.16385Problem Signature 03:unknownProblem Signature 04: 21200290Problem Signature 05:AutoFailoverProblem Signature 06:11Problem Signature 07: CorruptFileOS Version:6.1.7601.2.1.0.256.1Locale ID:1033Underneath the pop up box, The startup Repair window says WIndows cannot repair this computer automaticallywith the option of viewing diagmostic repair details or viewing advanced options for system recovery and support Under the advanced options, I have tried the startup repair, the system restore, the command promptchkdsk/f/rNone of which have worked Prior to this the notebook was working fine last night, I did not install anythingI ran the Farbar Recovery Scan ToolMod Edit: Removed FRST data, this is a malware tool not permitted in this forum and you have made no indication that this is a malware situation ~ Hamluis.
Start up repair cannot repair this computer automatically , I am getting this all of the time now when starting the PC ,i am sure it started when a new video card got put in but not sure?
I have no idea what was the last thing done on this computer (it is my wifes), but I do know that every now and then there has been a disc failure, checking disc startup, but it has always had a positive outcome.[CODE]
i use ubuntu OS and windows7 professional on an HP dv5 notebook, last week i made a mistake in that i removed the battery while the machine was on as i was using windows7. the time i tried to restart it again it recommended startup repair which ran but 'could not repair it automatically' i tried the f8 options but to no avail. when i run scan and memory diagnostics all are successful but the system can still boot. am able to view my data on windows through ubuntu but ubuntu can't execute windows programs. what should i do to restore windows without loosing data?
My laptop is stuck in the system repair screen and just stays there. Here's the background. His laptop was dog slow when he came home from college. The only way to boot it was in safe mode. I suspected a virus and ran multiple AV checks recommended on the Windows 7 support forum. No virus was found. Checkdisk and sfc/ scannow from cmd also failed to complete. Based on additional Forum info, I then tried to repair using the restore disks I made when I bought the Dell laptop. It worked fine until starting the repair and then hung at 1%. Eventually I turned off the power. Next I tried doing a custom Win 7 installation from a new disk (a fresh copy of Windows 7). It still tries to repair from the fresh Windows DVD and hangs on the system repair screen. I have powered off and tried to get back to safe mode unsuccessfully. How do I get out of this loop? BTW, it has not blue-screened at all.
As of about 3 days ago my Dell Inspiron N7010 (Windows 7 Home Prem 64bit) fails to boot up. It gets to the initial Windows screen before the login screen and freezes, then sends me into Startup Repair. [code] I've tried running the diagnostics and get no error codes. I've tried restore points, memory diagnostics.. pretty much everything except factory image, with no success. I have a lot of government programs installed on this laptop, so.
I have a Lenovo Thinkpad T400 with Windows 7 32 bit.When I got home today and wanted to turn my laptop on, I couldn't get past the startup screen, displaying the thinkpad welcome message. I have tried pressing the ThinkVantage button, and all the f buttons, esc, delete, nothing works.I have also tried inserting my Windows disc into the disc drive but that does nothing either.
I recently got my first SSD after me original HD crashed and lost the windows files. So I decided to get windows 7 for it, I tried installing it from a USB and read the thread about it but with no luck. So I decided to go with my original windows xp cd and then upgrade to windows 7. I started up the comp and had it boot from cd, formatted the new SSD and installed the windows xp files. My comp then rebooted as normal for this and now it stays at the Asus motherboard screen for about 35-40 sec before going to a black screen with the blinking _ at top left and restarts just to do it all over again. I can hit Tab and if gives me the info, detects the Cd-rom, SSD and my usb keyboard. I have the option to hit alt+f2 to load the flash drive, but there is none saved in bios. I hit Del to run setup and everything is detected. WhenI fit f8 to try and boot from the SSD (to let windows continue to install) it goes to the black screen _ flashing or restarts immediately.
I could not get my laptop to start today. I took out the battery to rest it. I can get it to turn on with the battery out when I plug it in but I am stuck on a red screen that has the compaq logo. In the bottom left it says Press the ESC key for Startup Menu. Nothing happens when I press ESC, I am just stuck on this screen.
my computer keeps going to startup repair. I have tried to start in safe mode, last known configuration,start normally. i have also tried to change the bios and boot from a disc but nothings working so please I need help urgently!
i recently install new updates on my laptop , after downloading and installing and asking me to restart my computer ,i did choose to restart now . After booting up again it is now stuck on windows 7 logo screen on startup. I tried booting up on safe mode and last known good config. but it didn't work. Also tried to use windows installation disk but it doesn't work either it just keep loading on "setup is starting" also tried "repair my computer" option but it just show me just a plain black screen
i had a Toshiba satellite laptop l745d with a6 vision AMD graphic card,windows 7 ultimate x64 os , 4gb of ram quadcore
Ok windows stucks on welcome, it will not boot so i am doing a startup repait but its stuckIt asked meif i want to do system recovery and i clicked no cancel , (only repair) but the blue bar that moves while its repairing it doesnt move its frozen and it says attempting repairs... nothing moves