New SSD, Stuck At Startup Motherboard Screen?

Feb 9, 2013

I recently got my first SSD after me original HD crashed and lost the windows files. So I decided to get windows 7 for it, I tried installing it from a USB and read the thread about it but with no luck. So I decided to go with my original windows xp cd and then upgrade to windows 7. I started up the comp and had it boot from cd, formatted the new SSD and installed the windows xp files. My comp then rebooted as normal for this and now it stays at the Asus motherboard screen for about 35-40 sec before going to a black screen with the blinking _ at top left and restarts just to do it all over again. I can hit Tab and if gives me the info, detects the Cd-rom, SSD and my usb keyboard. I have the option to hit alt+f2 to load the flash drive, but there is none saved in bios. I hit Del to run setup and everything is detected. WhenI fit f8 to try and boot from the SSD (to let windows continue to install) it goes to the black screen _ flashing or restarts immediately.

View 9 Replies


ADVERTISEMENT

Stuck On Startup Screen?

Jun 10, 2011

I have a Lenovo Thinkpad T400 with Windows 7 32 bit.When I got home today and wanted to turn my laptop on, I couldn't get past the startup screen, displaying the thinkpad welcome message. I have tried pressing the ThinkVantage button, and all the f buttons, esc, delete, nothing works.I have also tried inserting my Windows disc into the disc drive but that does nothing either.

View 3 Replies View Related

Compaq Presario Stuck On Red Startup Screen?

Aug 22, 2011

I could not get my laptop to start today. I took out the battery to rest it. I can get it to turn on with the battery out when I plug it in but I am stuck on a red screen that has the compaq logo. In the bottom left it says Press the ESC key for Startup Menu. Nothing happens when I press ESC, I am just stuck on this screen.

View 1 Replies View Related

Stuck On Startup Repair Screen, Keeps Looping?

Jul 9, 2012

My granddaughter has a laptop with Windows 7 pre-installed. I went to turn it on after charging it and the Startup Repair window comes up. I can't get any System Repair options except for Startup Repair which can not repair the computer automatically. This is the problem details listed:

StartupRepairOffline
6.1.7600.16385
6.1.7600.16385
unknown
21200831
autofailover
20
NoRootCause
6.1.7600.2.0.256.1

I don't have much information on this laptop since we are on vacation. The only thing my daughter told me was that Windows was preinstalled. The laptop is ASUS.

View 9 Replies View Related

Computer Getting Stuck At Startup Screen - Repair Unsuccessful

Jun 2, 2011

Recently my desktop has started having issues. I purchased it new in january and within this last month when I start it, it gets stuck in the startup screen. When I try to do startup repair it always is unsuccessful. When I view the details it lists this "problem signature 07: Bad patch" I have tried doing a system restore to every point it lists and it says "the instruction at 0xfba8ca53 referenced memory at 0x06e2f90f. The memory could not be read. Click ok to terminate". When I try to enter safe mode it doesn't work either.

View 2 Replies View Related

Laptop Stuck On Windows Logo Screen In Startup

Jan 1, 2013

i recently install new updates on my laptop , after downloading and installing and asking me to restart my computer ,i did choose to restart now . After booting up again it is now stuck on windows 7 logo screen on startup. I tried booting up on safe mode and last known good config. but it didn't work. Also tried to use windows installation disk but it doesn't work either it just keep loading on "setup is starting" also tried "repair my computer" option but it just show me just a plain black screen

i had a Toshiba satellite laptop l745d with a6 vision AMD graphic card,windows 7 ultimate x64 os , 4gb of ram quadcore

View 8 Replies View Related

Stuck On Startup Repair Screen Saying Repairing Hard Drive

Dec 9, 2012

Before I start this happened after updating the motherboard BIOS from version 1.4 to 1.7, I went to 1.6 after just in case the latest BIOS had a bug

I've been stuck on the startup repair for almost 5 hours saying that it's repairing my hard drive or whatever (i forget exactly what it said), I first booted linux to check the SMART data on the HDD (i now know that I can do it with HBCD too) it came back all fine. I am now running Hirens Boot CD and DRevitalise to scan and repair bad sectors.

System Specs:

i5 3570k @ stock
MSI Z77 GD55 BIOS Version 1.6
8GB Kingston HyperX 1600mhz
Running HD4000 graphics
500GB Blue WD HDD

I do have a DxDiag on the desktop of the pc in question which I could get if needed (to tired to do now)

Edit: Reinstalling is not an option I will consider unless there is nothing else that I can do.

Edit: Turns out there is a tool from WD for HDD testing, am running that now instead if the last one.

View 6 Replies View Related

Windows 7 Boot Up Stuck At Starting Screen - Startup Repair Offline

Dec 10, 2010

Windows wont boot up I get stuck on the "starting windows screen" Startup Repair cannot repair this computer automatically:

Problem signature:
�Problem Event Name: StartupRepair Offline
�Problem Signature 01: 6.1.7600.16385
�Problem Signature 02: 6.1.7600.16385
�Problem Signature 03: unknown
�Problem Signature 04: 21200718
�Problem Signature 05: AutoFailover
�Problem Signature 06: 10
�Problem Signature 07: BadDriver
�OS Version: 6.1.7600.2.0.0.256.1
�Locale ID: 1033

View 1 Replies View Related

Windows 7 Computer Stuck At Startup Screen When Run Windows 7?

Jul 21, 2012

When i do system repair it comes up with a cmd saying im missing files or something i will post pics if needed.I tried running a program that SIW2 gave to me with the cd and idk what to do.

View 2 Replies View Related

Windows 7 Won't Startup Properly - Stuck In Startup Repair Loop

Feb 18, 2012

I have a Dell Inspiron and a while ago I shut down my PC and the next morning I was faced with options to repair my computer. It hung on the screen for ages before it actually came up with startup repair and supposedly fixed the problem. A few days later, everything got very slow and started to freeze a lot and before long, booting the computer got very slow as well as it hung for about ten minutes on a black screen after the 'welcome' screen before finally starting up. I decided to reinstall the operating system (I did NOT reformat the C drive), so I borrowed my Grandma's external hard drive and copied my files. After reinstalling using a Dell Windows 7 64-bit Home Premium Re-Installation DVD, I copied and deleted the files off the external hard drive onto my PC (I didn't know it would create a Windows.old folder) and started installing programs. Then I left it overnight to install quite a big program. This morning, somehow it had turned off. I turned it on and it gave me the safe mode options and a 'start windows normally' option. I chose the latter and after typing my password it hung on the welcome screen again. I left it for ages and it just went back to the user login screen again. I pressed the red button in the corner to shut it down but it just hung once again on an empty screen so I did a hard shutdown (held down the power button). I turned it on again...startup repair. It gave me the option for system restore, which I did (then realising when it finished that I hadn't made a backup). I booted it, and again it wouldn't start properly. At this time, safe mode booted fine. After trying various things (even using a compressed air can to get rid of dust) and a few hard shutdowns, suddenly every option from the advanced boot menu took me to startup repair except 'Repair your Computer' which gave the normal options for repair (although now it only gives me 2, Startup Repair and DataSafe Restore and Emergency Backup. Now when I do startup repair, some times it says it has fixed the problem, and sometimes it says it cannot be fixed automatically and gives me information on the problem (a few things it said were: 'StartupRepairOffline', 'AutoFailover' and 'CorruptRegistry').

I can't reinstall my computer because then I would lose my precious files.

Is there some way I can save my files and reinstall or even just save my files somehow or am I screwed?

View 1 Replies View Related

It Is Stuck When Try To Startup

Nov 2, 2012

problem with the starup

View 1 Replies View Related

Stuck In Selective Startup?

Sep 4, 2012

I got a new laptop recently (Windows 7 Home Premius SP1), and but there were several dozen updates that wouldn't install. After looking around online a bit, I eventually decided to go to msconfig and change the startup to only boot with windows programs, which solved that particular problem.Now however I can't change it back to normal startup.If I change it back and click apply, then when I go back in the setting is as before. If I just click "okay" and restart with new settings, then it does a selective startup anyway and reverts the settings.

View 8 Replies View Related

Stuck In Startup Repair?

Aug 7, 2011

I have a Sony Vaio laptop which is only a few months old. Here is the problem: i was trying to uninstall the trial version of office 2010 (after failing to activate it properly) and after going into control panel and clicking on "uninstall" to remove the office 2010 software, the computer automatically shut down and restarted and went into startup repair. after running this a couple of times, it said it was unable to fix the problems and asked to send the report to microsoft. then it just shut off by itself. i turned it back on and chose to "start windows normally." even then it went into startup repair and was again unable to fix the problems. then it just became stuck with a blank screen so i had to force power off. now i am not sure what to do. i don't want to keep restarting it only to go into startup repair and burn something out by turning it on and off so frequently.

View 8 Replies View Related

Stuck In Startup Repair?

Jul 12, 2012

I left the computer on for the evening and returned to it this morning only to find the Startup Repair Tool. I have attempt a number of different reboot attempts to no avail. Using F8 during start-up is not being recognized so I cannot boot up in Safe ModeHere is the Startup Up Repair Tools Readout:[CODE]

View 1 Replies View Related

Windows 7 Stuck In Startup Repair?

Feb 22, 2012

I am having a problem with windows 7, when i start the computer it says loading files and then goes directly to startup repair. I cant even get into the computer in safe mode or anything else by pressing f8 when istartup. It just keeps on this startup repair loop.Its states startup repair checking for problems, it attempts repairs but then it says it cant repair this computer automatically. I have tried system restore, sytem image recovery and tried to restore the computer to its factory state. when i try that i get a error 0x4001001300001002. I didnt get any recovery disks when i bought the computer either.

View 12 Replies View Related

Laptop Stuck In Startup Repair And Can't?

Apr 30, 2012

I have a Dell Inspiron N4010 running Windows 7. Last night I was printing off PDF files and listening to a CD when the song that was playing got stuck and the print job I'd just ordered stalled. Then a horrible, loud, relentless sort of whirring noise came out of the speakers and wouldn't stop and the computer was completely unresponsive. This has happened before, last December, and I did what I did then...I just forcibly shut it down. When I started it back up, I could choose between starting normally or running Startup Repair, which was recommended. I swear I chose to start normally, but I can't be totally sure. I walked out of the room to do a couple things and when I went back I saw Startup Repair running and it said it could take over an hour. I had to leave for work in 20 minutes, so I decided to just leave it on. 9 hours later, when I got home, it was STILL going. I tried to cancel, and was informed that the current operation could not be canceled. I forced a shut down again (maybe not the brightest thing but I couldn't think of anything else) and even disconnected the battery. Then I started it up...got the same choice and chose to start Windows...and Startup Repair started again. I managed to cancel and shut down with the OFF button again. Restarted and chose Windows...same thing. Restarted and chose Setup Repair, same result. I cannot do or open anything. I don't know if putting the startup discs in it would even register...and I'm not sure I even have any, as Windows 7 came pre-installed. I haven't backed up my hard drive in a loooong time and I can't afford a new machine.

View 8 Replies View Related

Windows 7 Stuck In Startup Loop

May 3, 2012

I was using EASUS partitioning tool to repartition my hard disc a few days ago as my C: drive was running out of space. I merged the C: drive (which is my system drive) with my D: drive (which contains a lot of data as well). All seems to be going well, but after the usual reconfiguration and restart, my windows 7 is stuck in the startup repair screen. Windows is trying to repair my startup without success, which is resulting in a loop. Fortunately i am able to go into safe mode and save my data.

View 5 Replies View Related

Random BSOD Sometime Get Stuck At Startup

Jun 25, 2012

I've experienced some issue with my PC recently and formatting it didn't help. Please find attached the required files. The BSOD are essentially random, and sometimes when I power up the PC, it just doesn't startupt, staying stuck in the BIOS or something. I have an Acer predator, Windows 7 64 bits (OEM)

View 9 Replies View Related

Windows 7 Startup Stuck For 5 Minutes?

Dec 14, 2012

Ok, so last night, I was so tired, Instead of shutting down my PC thru Start -> Shutdown, I just used the power button from the Chassis, When i started my PC this morning, It was stuck at the windows logo for about 5minutes before actualy starting....I tried using the windows startup repair(Forgot the exact name) But its not repairing....Are there any software that check if theres something wrong with my windows 7 ,Because Im worried that if i restart my PC , It will get stuck in the Windows 7 logo permanently

View 1 Replies View Related

Stuck On Startup Repair Before Login To Windows 7?

Jan 27, 2012

Everytime I start my computer it goes into startup repair searching for problems. I tried going to F8 into safe mode but it goes bac to searching for problems in statup repair. Is there any way I can bypass it from going to startup repair page and go into windows.

View 3 Replies View Related

Wireless Stuck On Startup And System Breaks Down?

May 21, 2012

I use HP Probook 4530s and while Windows starts,wireless connection stuck on searching network and system stop working.Can't do anything,if I click on something cursor becomes busy and nothing happens.System has become completely unusable.When I start Windows in save mode, I get a notice "Turn on Windows Security Center service (important)".But when I click on it error message is: "Windows Security Center service can't be started".I reinstalled Windows but the problems remain the same

View 5 Replies View Related

Statup Stuck On Startup Repair Loop

Apr 19, 2012

my problem is rather odd (or at least I haven't seen it before). Whenever I boot up the netbook it goes right into startup repair, without the option to cancel it, even if I try to start windows in safe mode (or any other startup options for that matter), the system launches the startup repair.The repair itself runs fine (doesn't freeze or antyhing like that), however it is never able to fix the issue ("Startup Repair is unable to repair this computer automatically").

The problem details read as follows:

Problem signature:
Problem event name: StartupRepairOffline
Problem signature01: 0.0.0.0
Problem signature02: 6.1.7600.16385
Problem signature03: unknown
Problem signature04: 6

[code]....

View 9 Replies View Related

Laptop Stuck At Startup After Clean Install

Oct 10, 2009

Whilst my sister and family were away this weekend I offered to install Windows 7 Home Premium (x86) on her Toshiba Equium L40-10U laptop.

It was previously running Windows Vista Home Premium, however as it was infested with all kinds of nasties I figured I would kill two birds with one stone.

Anyway, I downloaded the ISO from Technet and burnt it to DVD, updated the BIOS on the laptop (worked fine) and proceeded to install Windows 7 (fresh, not upgrade, completely wiped and started from scratch).

Everything went fine, went through setup and logged on, Windows Update kicked in, perfect.

Had a play around and the machine was running like a dream, so I started installing stuff. As I didn't require ANY extra drivers I installed the RTM version of Microsoft Security Essentials first. I then moved on to Spybot - Search & Destroy etc.

When I restarted the machine it started to boot and got to the Starting Windows screen, however the Windows animation didn't appear, I waited, and waited, and nothing. Restarted again and it went to the Startup Repair option, did that, found nothing, restarted, and again it was stuck at the Starting Windows screen.

I rebooted and tried for Safe Mode, which very weirdly failed, it said loading and again just sat there.

Failing that I figured either bad install and/or bad burn. Re-dwonloaded ISO, burnt new DVD, reinstalled. Did the same again.

I decided I would give it a quick clean just to be safe, so I gave it a blast with some compressed air. Tried again, installed fine, Windows Update fine, first restart and it was dead again.

I have since tried installing without letting Windows Update connect, no joy, I then ran CrystalDisk to check the HD and that reported as all fine.

I'm going to leave it running Memtest overnight/overmorning and see what that says, whilst I download Windows Vista in the hope that if all else fails I can revert to that.

So, can anyone shed any light on this or offer me any help?

View 7 Replies View Related

Fresh Install Of Windows 7- Gets Stuck In Startup Repair?

Jun 7, 2012

I did a fresh install of windows 7 home premium on a brand new HDD, and after doing windows update, it won't boot to the desktop

View 12 Replies View Related

Stuck On Startup Recovery Loop / Can Backup My Files

Mar 1, 2012

I have a pc that is setup with a 60 gb SSD for Windows and a 2TB RAID 0 for the rest of the stuff. Last night I decided to partition some of the RAID to install Windows 8 Consumer Preview and see what the fuss was about.I partitioned it just fine, and everything was going smoothly, until I decided to use the windows tool to make my pendrive bootable with the Win8 ISO.In the middle of the process, I was doing something else (unistalling firefox to be more exact) and suddenly a blue screen comes up!Now my PC is stuck on the famous startup recovery loop, and I cant find a way to make it boot.

- Manual CHKDSK
- That tutorial on this forum where you mess around with the prompt wnidow
- restarting 1 billion times
- booting up from the windows DVD and trying to repair the hard drive

And as you can imagine nothing happened and I am still stuck with my har drive being unbootable.Now I cant help thinking that this was due to my pen drive being in the middle of that process in some way, but I have since removed it, burned it and buried in a forest, and still my problem persists.Since I havent found another solution online, I think now that the only way for me to get my PC back running is by reformatting my SSD (while hopefully keeping all my RAID files intact) and reinstalling windows. BBUUUTT!!! I have 100s of hours worth of Skyrim in that drive, and if I loose that I will seriously freak out! While I dont play it a lot anymore, when the expansions come, Dovahkin will rise again!Can I copy my files from my messed up SSD to somewhere else, before formatting it and starting a new life?

View 3 Replies View Related

Windows 7 Stuck In Endless Boot Cycle Startup Repair Freezes

Jan 22, 2012

So, I'm not exactly sure what I did. I was clearing up some space on my computer after using the Norton Removal Tool to get rid of this Norton trial popup that came up everytime I booted my computer. Now, after it told me to restart, it seems to be stuck in an endless boot cycle that resets itself after showing the Windows logo. I've since tried running startup repair, which freezes as it shows the progress bar for 'Windows is loading files'. Safe mode will not work, either. It just sends it back into the boot cycle. Not sure what to do at this point. My computer came pre-installed with Windows 7 Home Premium 64bit, so I don't have any startup discs.

View 3 Replies View Related

Black Screen After Installing New Motherboard

Feb 20, 2011

recently I installed a new motherboard and since it did not support RAID I had to install the OS onto one of the HD's. After creating a username and password the computer restarted again and after posting went straight to a black screen with a blinking white underscore in the top left. I tried booting from the CD again but when it says "press any key to boot from cd" nothing happens when i push any key on my keyboard. Any suggestions?

View 8 Replies View Related

How To Determine If Its Really Motherboard Failing Without A Screen

Jan 14, 2012

I've just assembled a pc using different parts from old computers. For some reason my pc will turn on, but my screen just stays black. I've tried several graphic cards, nothing. How do I determine if its really the motherboard failing without a screen ?

View 3 Replies View Related

Initial Windows Screen Before Login Screen And Freezes / Then Sends Into Startup Repair

Mar 28, 2012

As of about 3 days ago my Dell Inspiron N7010 (Windows 7 Home Prem 64bit) fails to boot up. It gets to the initial Windows screen before the login screen and freezes, then sends me into Startup Repair. [code] I've tried running the diagnostics and get no error codes. I've tried restore points, memory diagnostics.. pretty much everything except factory image, with no success. I have a lot of government programs installed on this laptop, so.

View 9 Replies View Related

Black Screen On Startup / Showing Cursor / Doesn't Go To Log In Screen

Dec 5, 2011

I'm using I have a DELL4500S desktop, on startup it will not go to the login screen, the screen is just black with the cursor showing. I've tried restarting the computer, unplugging everything and restarting it. Nothing is working. When it first starts a pop up shows and says "This Application has failed to start because SAMLIB.dll was not found. Re-installing the application may fix the problem."I'm not sure what it's talking about and what to re install and I can't reinstall whatever it is because I can't get to the start menu.

View 3 Replies View Related

Startup Delay After Login Screen - Blank Screen With Cursor?

Dec 31, 2010

Everything shows up fine until the welcome screen after that it normally used to fade to the desktop but now it goes blank. The screen in Black with only the mouse pointer. Its not hung, i can move the mouse pointer. Then after a minute or so it advances to the desktop. Everything on the desktop loads up in less than 5s. The PC runs fine, it is really fast as there are only a few programs, but only boots slow. My total boot time is about 3-5 min. I think it should be like in a minute or so.I have not tweaked much with the system but have installed a few programs like MS office, Nero, Acrobat and Photoshop. These are the only heavy programs in the PC right now. The only games on the PC are AC1 and AC2. I have uninstalled my graphic driver and reinstalled. I already minimized the programs in the msconfig>startup to the minimum. I have run ccleaner, spybot s&d, Antimalware and i also have a trial copy of Kaspersky AV (upgrading later to 1-year license). there are no peripherals attached during boot except the USB keyboard and mouse. A printer is attached too but is most of the time turned off.

View 11 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved