Laptop Stuck On Windows Logo Screen In Startup
Jan 1, 2013
i recently install new updates on my laptop , after downloading and installing and asking me to restart my computer ,i did choose to restart now . After booting up again it is now stuck on windows 7 logo screen on startup. I tried booting up on safe mode and last known good config. but it didn't work. Also tried to use windows installation disk but it doesn't work either it just keep loading on "setup is starting" also tried "repair my computer" option but it just show me just a plain black screen
i had a Toshiba satellite laptop l745d with a6 vision AMD graphic card,windows 7 ultimate x64 os , 4gb of ram quadcore
View 8 Replies
ADVERTISEMENT
Mar 6, 2011
I recently built a computer, and tried to install Windows 7 OEM on it, but it gets stuck at the screen where it says starting windows and the logo appears. The logo gets smaller and larger. I've been told it might be something with the RAM, but tested it out and that's not the problem.
View 2 Replies
View Related
Dec 3, 2011
I tried to flash drive on another computer it worked fine, but on my desktop it will not..If i turn my dektop on without the flash drive it comes up and says Reboot and Select proper boot device or insert boot media in selected boot device and press a key.If i insert the flash drive it freezes..If i start the computer with the flash drive in, it wont even get to the screen it freezes at the screen that tells me to press f12 for this, esc for that etc etc.This person has the same problem..And I cant boot from my origonal Hard drive because I believe its gone bad, If i start it with that hard drive it says Reboot and select proper boot device, its like it doesnt even recognize it, which im guessing means its gone bad.. But it wont freeze with that hard drive, but I also cant do anything
View 14 Replies
View Related
Jul 15, 2012
Well it had been awhile since I reloaded windows and found out about win8 so I decided to try the new windows 8 release preview. After it installing it, It would go past the windows loading screen and leave a blank screen. Disappointed I went to load windows 7. Installed fine, but after the first restart it will not go past the windows logo screen.
When I say I'm reloading windows I am not formating my harddrive. I'm running a single harddrive setup and have 500gig of entertainment and miscellaneous I have not way to backup. I do the write over partition thing where it throws everything in a windows.old folder. I'm considering getting a solid state just to load windows to. Formatting the current drive is not an option.
I can boot to safe mode, but being this is a new install there is nothing I did to undo.
View 2 Replies
View Related
Jun 17, 2012
My computer specs:[CODE]I installed windows 7 ultimate 64bit on the hard drive with a different computer. But when I connect it to this, it freezes and stalls at the windows 7 loading/logo screen, and restarts.It is frusrating because i cannot use the computer
View 5 Replies
View Related
Dec 10, 2010
Windows wont boot up I get stuck on the "starting windows screen" Startup Repair cannot repair this computer automatically:
Problem signature:
�Problem Event Name: StartupRepair Offline
�Problem Signature 01: 6.1.7600.16385
�Problem Signature 02: 6.1.7600.16385
�Problem Signature 03: unknown
�Problem Signature 04: 21200718
�Problem Signature 05: AutoFailover
�Problem Signature 06: 10
�Problem Signature 07: BadDriver
�OS Version: 6.1.7600.2.0.0.256.1
�Locale ID: 1033
View 1 Replies
View Related
Jun 10, 2011
I have a Lenovo Thinkpad T400 with Windows 7 32 bit.When I got home today and wanted to turn my laptop on, I couldn't get past the startup screen, displaying the thinkpad welcome message. I have tried pressing the ThinkVantage button, and all the f buttons, esc, delete, nothing works.I have also tried inserting my Windows disc into the disc drive but that does nothing either.
View 3 Replies
View Related
Feb 9, 2013
I recently got my first SSD after me original HD crashed and lost the windows files. So I decided to get windows 7 for it, I tried installing it from a USB and read the thread about it but with no luck. So I decided to go with my original windows xp cd and then upgrade to windows 7. I started up the comp and had it boot from cd, formatted the new SSD and installed the windows xp files. My comp then rebooted as normal for this and now it stays at the Asus motherboard screen for about 35-40 sec before going to a black screen with the blinking _ at top left and restarts just to do it all over again. I can hit Tab and if gives me the info, detects the Cd-rom, SSD and my usb keyboard. I have the option to hit alt+f2 to load the flash drive, but there is none saved in bios. I hit Del to run setup and everything is detected. WhenI fit f8 to try and boot from the SSD (to let windows continue to install) it goes to the black screen _ flashing or restarts immediately.
View 9 Replies
View Related
Aug 22, 2011
I could not get my laptop to start today. I took out the battery to rest it. I can get it to turn on with the battery out when I plug it in but I am stuck on a red screen that has the compaq logo. In the bottom left it says Press the ESC key for Startup Menu. Nothing happens when I press ESC, I am just stuck on this screen.
View 1 Replies
View Related
Jul 9, 2012
My granddaughter has a laptop with Windows 7 pre-installed. I went to turn it on after charging it and the Startup Repair window comes up. I can't get any System Repair options except for Startup Repair which can not repair the computer automatically. This is the problem details listed:
StartupRepairOffline
6.1.7600.16385
6.1.7600.16385
unknown
21200831
autofailover
20
NoRootCause
6.1.7600.2.0.256.1
I don't have much information on this laptop since we are on vacation. The only thing my daughter told me was that Windows was preinstalled. The laptop is ASUS.
View 9 Replies
View Related
Apr 30, 2012
I have a Dell Inspiron N4010 running Windows 7. Last night I was printing off PDF files and listening to a CD when the song that was playing got stuck and the print job I'd just ordered stalled. Then a horrible, loud, relentless sort of whirring noise came out of the speakers and wouldn't stop and the computer was completely unresponsive. This has happened before, last December, and I did what I did then...I just forcibly shut it down. When I started it back up, I could choose between starting normally or running Startup Repair, which was recommended. I swear I chose to start normally, but I can't be totally sure. I walked out of the room to do a couple things and when I went back I saw Startup Repair running and it said it could take over an hour. I had to leave for work in 20 minutes, so I decided to just leave it on. 9 hours later, when I got home, it was STILL going. I tried to cancel, and was informed that the current operation could not be canceled. I forced a shut down again (maybe not the brightest thing but I couldn't think of anything else) and even disconnected the battery. Then I started it up...got the same choice and chose to start Windows...and Startup Repair started again. I managed to cancel and shut down with the OFF button again. Restarted and chose Windows...same thing. Restarted and chose Setup Repair, same result. I cannot do or open anything. I don't know if putting the startup discs in it would even register...and I'm not sure I even have any, as Windows 7 came pre-installed. I haven't backed up my hard drive in a loooong time and I can't afford a new machine.
View 8 Replies
View Related
Jun 2, 2011
Recently my desktop has started having issues. I purchased it new in january and within this last month when I start it, it gets stuck in the startup screen. When I try to do startup repair it always is unsuccessful. When I view the details it lists this "problem signature 07: Bad patch" I have tried doing a system restore to every point it lists and it says "the instruction at 0xfba8ca53 referenced memory at 0x06e2f90f. The memory could not be read. Click ok to terminate". When I try to enter safe mode it doesn't work either.
View 2 Replies
View Related
Oct 10, 2009
Whilst my sister and family were away this weekend I offered to install Windows 7 Home Premium (x86) on her Toshiba Equium L40-10U laptop.
It was previously running Windows Vista Home Premium, however as it was infested with all kinds of nasties I figured I would kill two birds with one stone.
Anyway, I downloaded the ISO from Technet and burnt it to DVD, updated the BIOS on the laptop (worked fine) and proceeded to install Windows 7 (fresh, not upgrade, completely wiped and started from scratch).
Everything went fine, went through setup and logged on, Windows Update kicked in, perfect.
Had a play around and the machine was running like a dream, so I started installing stuff. As I didn't require ANY extra drivers I installed the RTM version of Microsoft Security Essentials first. I then moved on to Spybot - Search & Destroy etc.
When I restarted the machine it started to boot and got to the Starting Windows screen, however the Windows animation didn't appear, I waited, and waited, and nothing. Restarted again and it went to the Startup Repair option, did that, found nothing, restarted, and again it was stuck at the Starting Windows screen.
I rebooted and tried for Safe Mode, which very weirdly failed, it said loading and again just sat there.
Failing that I figured either bad install and/or bad burn. Re-dwonloaded ISO, burnt new DVD, reinstalled. Did the same again.
I decided I would give it a quick clean just to be safe, so I gave it a blast with some compressed air. Tried again, installed fine, Windows Update fine, first restart and it was dead again.
I have since tried installing without letting Windows Update connect, no joy, I then ran CrystalDisk to check the HD and that reported as all fine.
I'm going to leave it running Memtest overnight/overmorning and see what that says, whilst I download Windows Vista in the hope that if all else fails I can revert to that.
So, can anyone shed any light on this or offer me any help?
View 7 Replies
View Related
Dec 16, 2012
Today when I turned it on it happened... I tried restarting and run repair mode, checked all the fixes and that but still failing... What to do?
View 1 Replies
View Related
Jan 12, 2013
I have installed windows 7 ultimate yesterday on my new SSD. it worked fine after i installed it.. today I started my PC and i noticed my windows is stuck at the Loading Screen.. Already did some research with no luck. I already tried to do Restore Point didn't work.
View 5 Replies
View Related
Dec 9, 2012
Before I start this happened after updating the motherboard BIOS from version 1.4 to 1.7, I went to 1.6 after just in case the latest BIOS had a bug
I've been stuck on the startup repair for almost 5 hours saying that it's repairing my hard drive or whatever (i forget exactly what it said), I first booted linux to check the SMART data on the HDD (i now know that I can do it with HBCD too) it came back all fine. I am now running Hirens Boot CD and DRevitalise to scan and repair bad sectors.
System Specs:
i5 3570k @ stock
MSI Z77 GD55 BIOS Version 1.6
8GB Kingston HyperX 1600mhz
Running HD4000 graphics
500GB Blue WD HDD
I do have a DxDiag on the desktop of the pc in question which I could get if needed (to tired to do now)
Edit: Reinstalling is not an option I will consider unless there is nothing else that I can do.
Edit: Turns out there is a tool from WD for HDD testing, am running that now instead if the last one.
View 6 Replies
View Related
Sep 6, 2010
I am trying to dual boot Windows 7 Home Premium and Ubuntu 10.04 on my laptop (Toshiba Portege M400). I had Ubuntu 10.04 installed previously but I decided to wipe my hard drive before installing Windows 7. I used GParted to delete all my partition and setup two new ones. I formated the first partition as NFTS for Windows. After that, I proceeded to installing Windows. The first time I tried it, I was successful although I did need to reformat that NFTS partition I had made because it said that the partition table type (GUID) was not compatible. Windows 7 installed fine after that. However, when I try to install Ubuntu, it sees the whole disk as blank. I tried resolving this issue with GParted but that too saw the drive as if it were blank even though Windows 7 was installed. After that, I booted up the GParted Live CD once again and changed the partition table to MS-DOS. My Windows 7 boots up and goes through all the tasks before the first boot up. When it restarts for the first time, it fails to boot; it simply stays on the glowing Windows logo. I've tried formatting the entire disk through the Windows 7 disk and partitioning from there several times and I still get the same results.
View 3 Replies
View Related
Dec 8, 2012
The problem is this. I got a new GPU for my moms computer. She installed it, it worked fine. She played her game for a bit then went to restart the computer and now it wont work. It'll get stuck at the windows logo where it will pulsate but nothing else after (it just keeps doing that).The only other thing we can besides starting windows normally is doing Windows Start Up Repair. We don't get the option to start in safe mode ( I think. We we supposed to hit F8 while on the windows logo to do that?). When we run Start Up Repair, it goes to Windows with some kind of progress bar that just keeps going and going (it's not really a progress bar, more just to show that it's loading something I guess).When we try booting Windows from the disc, we get the same two options "Start Windows Normally" and "Start Windows Repair" or or something like that.The only things we have not tried yet are:*Letting Start Up Repair go for 15+ minutes (we went for 15 minutes but decided to try other things to fix the issue)Taking out the new card and putting in the old card *Going in to Bios and press F5 to set everything to default Resetting Bios (idk how to do this processes but I've reada bit and I can find a guide)We tried press F8, but that just takes us to the boot menu with a list of devices to boot from. If we try to boot from the device with windows on it, it just gives us the options to start Windows normally or run repair.For some reason, we just cannot reinstall windows. We set bios to boot from disc, we even try manually booting from disc via the boot menu, but no go. So booting from disc and repairing or something similar is apparently not an option. What could it be?I am thinking that it is an issue with the hard drive. I don't know. Any thoughts or opinions?I feel really bad at this point. I wanted to help out and I caused this headache Edit: I forgot to mention, I live several hours from her, so I cannot do anything manually myself. Any instructions or tips or whatnot I will have to give over skype
View 4 Replies
View Related
Jun 28, 2012
i have a desktop computer i used it to install Windows 7 ultimate x86 and i have a laptop i used it to install Windows 7 ultimate x64 the desktop and laptop both support x64 systems, i cloned both computers with Norton ghost and when i restore the cloned image to it's own computer it works with no problem but when i try to restore the image from my laptop to my desktop computer or the image from my desktop to my laptop windows boot but freeze at the animated windows 7 logo screen? i tried to generalize the system with sysprep but i failed cause my computer want start after i used sysprep?
View 9 Replies
View Related
Nov 17, 2012
I'm not 100% sure if this is even the right place to post this, so sorry if it's in the wrong forum. I have a Asus N53S laptop runnin windows 7 32 bit and I am having some trouble with it. This will probably be a large post so bear with me, the first problem I started having was blue screens on startup. I was able to fix the computer by running Startup repair a few times (tool about 3-4 hours) after that it worked for a day but the next day when I turned on the computer it froze and the music that was playing turned into a loud droning noise. After that I ran the startup repair again it did not work so I did a system restore, it seemed to fix the problem but sadly on startup I started getting blue screens again and this time neither startup repair nor system restore would work (I get a message saying there was a unexpected error: the system cannot find the file specified. (0x80070002) please close system restore and try again) I re open system restore 5 times and I get the same message.I restart my computer , spam f8 and choose the use last known good configuration. After I restore everything to factory settings and finish installing my steam games and other files I Ty restarting the computer to see if it fixed the problem. It seemed to have worked however that night there was a particularly large windows update (90 or so a one time) I clicked shutdown and let it finish the updates while I went to sleep. The next morning I wake up and turn on the computer it finishes syncing the updates then stays at the starting windows screen ( the logo would not show up just those words and a black screen. After it sat like that for 10 minutes or so I hold the power button and try again ,this time it did the same thing but only for a few seconds and it ran startup repair itself , startup repair could not fix the problem.
View 1 Replies
View Related
Jul 21, 2012
When i do system repair it comes up with a cmd saying im missing files or something i will post pics if needed.I tried running a program that SIW2 gave to me with the cd and idk what to do.
View 2 Replies
View Related
Feb 8, 2012
I have a Levona G570 laptop. Windows is getting stuck on the welcome screen and also when I try booting in safe mode all I get is the safe mode in all 4 corners with a black screen, i can see the cursor also.
I tried doing a startup repair and the first couple times I tried would just keep going for over 5-6 hours, finally it did it again and gave me this error message along with it saying something along the lines of "Windows cannot automattically fix this"
Problem Signature
Problem Event Name" Startup Repair Offline
Problem Signature 01: 6.1.7600.16385
Problem Sig. 02: 6.1.7600.16385
Problem Sig. 03: Unknown
Problem Sig. 04: -1
Problem Sig. 05: System Disk
Problem Sig. 06: 1
Problem Sig. 07: No OS Installed
OS version: 6.1.7601.2.1.0.256.1
Local ID: 1033
Computer was working fine yesterday, shut it down then this happened out of nowhere? Laptop did not come with any Install Disc at all.
View 1 Replies
View Related
Dec 13, 2012
Last night, my computer spontaneously rebooted. When it got to the 'Starting Windows' screen, the animated windows logo never appeared. I rebooted. Tried running System Recovery. This time, the screen is "Windows is loading files..." The progress bar fills up and then freezes.
Tried booting into safe mode. Again, the "Windows is loading files" progress bar fills up and then freezes. Tried to reinstall Windows. Boots from DVD, then the "Windows is loading files" progress bar fills up and then freezes yet again. Have been running Memtest86+ for the last ~9 hours, no issues.
Specs: MSI 790FX-GD70 | AMD Phenom II X4 945 | 4x2GB G.Skill Ripjaws DDR3-1333 | 1x80GB Intel SSD (OS) | 2x1TB Samsung Spinpoint F3 7200RPM HDD (other) | 1x2TB WD Elements external HDD (backup) | XFX RadeonHD 6870 1GB GDDR5
View 7 Replies
View Related
Feb 13, 2013
I dropped my laptop this weekend. But it still worked for a few minutes before it froze. So I powered it off and tried to turn it back on. It turns back on just fine, but will continuously load the "Starting Windows" screen. I tried doing diagnostics and repairs, nothing. When I load it in safe mode, it loads up until the ClassPNP.sys, and then freezes.
View 7 Replies
View Related
Jan 29, 2012
I bought a hp laptop about a year ago and have been having a problem for the last couple days. I have windows 7 and when I go to start the laptop up it shows the HP screen then goes to the windows screen like its loading but then goes back to the hp logo and is stuck. I ran a HDD test and memory test those came back good. I tried to go into safe mode it acts like it loading then shows a blank screen. I try to do a system recovery and system restore the screen stays blank. I also took the battery out and press the power button down but that hasn't work. It's no longer under warrenty.
View 3 Replies
View Related
Feb 18, 2012
I have a Dell Inspiron and a while ago I shut down my PC and the next morning I was faced with options to repair my computer. It hung on the screen for ages before it actually came up with startup repair and supposedly fixed the problem. A few days later, everything got very slow and started to freeze a lot and before long, booting the computer got very slow as well as it hung for about ten minutes on a black screen after the 'welcome' screen before finally starting up. I decided to reinstall the operating system (I did NOT reformat the C drive), so I borrowed my Grandma's external hard drive and copied my files. After reinstalling using a Dell Windows 7 64-bit Home Premium Re-Installation DVD, I copied and deleted the files off the external hard drive onto my PC (I didn't know it would create a Windows.old folder) and started installing programs. Then I left it overnight to install quite a big program. This morning, somehow it had turned off. I turned it on and it gave me the safe mode options and a 'start windows normally' option. I chose the latter and after typing my password it hung on the welcome screen again. I left it for ages and it just went back to the user login screen again. I pressed the red button in the corner to shut it down but it just hung once again on an empty screen so I did a hard shutdown (held down the power button). I turned it on again...startup repair. It gave me the option for system restore, which I did (then realising when it finished that I hadn't made a backup). I booted it, and again it wouldn't start properly. At this time, safe mode booted fine. After trying various things (even using a compressed air can to get rid of dust) and a few hard shutdowns, suddenly every option from the advanced boot menu took me to startup repair except 'Repair your Computer' which gave the normal options for repair (although now it only gives me 2, Startup Repair and DataSafe Restore and Emergency Backup. Now when I do startup repair, some times it says it has fixed the problem, and sometimes it says it cannot be fixed automatically and gives me information on the problem (a few things it said were: 'StartupRepairOffline', 'AutoFailover' and 'CorruptRegistry').
I can't reinstall my computer because then I would lose my precious files.
Is there some way I can save my files and reinstall or even just save my files somehow or am I screwed?
View 1 Replies
View Related
Mar 2, 2011
I was wondering if there is any way to change the windows 7 start up logo. Right now when I boot up windows 7 it shows the vista like start up. Is there any way to change it to the new windows 7 startup logo?
I upgraded to windows 7 ultimate 32 bit
Dual boot windows xp home edition and windows 7 ultimate
I have a dell dimension 2400 with onboard graphics (Intel 82845G)
60.5 mb graphics memory
View 4 Replies
View Related
Sep 19, 2009
I wanted to dual boot Win 7 64 with my vista 32 but after the install completes and the computer reboots it hangs on the Win 7 boot logo and then just stays there until i turn off the power button. It's kinda like the problem when you have a USB plugged in and the boot logo hangs except there's nothing plugged into the comp. Reinstalled again the the same result. When I look at the win 7 drive from vista it looks like all the files are all there but it just keeps hanging on that logo =(. What should I do?
Also when i try and boot into safemode it hangs on "Classpnp.sys"
I've looked elsewhere and seen that people solved this problem by updating bios but I have the latest version of mine =(
I've tried EVERY boot option in F8 to no avail.
View 1 Replies
View Related
Jun 20, 2012
I have a 64 bit home premium and am trying to shave a few seconds off the startup time. I want to disable the animated logo at startup so I started msconfig>boot tab> checked the "no gui boot" box but the animation is still there!
View 7 Replies
View Related
Nov 12, 2011
I've had my computer for about 2 months now. Running windows 7 premium and recently when I boot up my computer, after it displays the bios menu, it skips the windows logo screen and goes straight to the welcome screen. I haven't noticed any issues other then this however I did notice strange noises when I booted up and first noticed the logo was missing. I've checked the menus and different options to turn off the logo but there all set to display it. I ran the system file checker and that came back clean as well.
Could it be a gpu issue or a motherboard issue? I did install skyrim recently and it reinstalled directx11 and made a new microsoft c++ file. I am thinking that could be it too. other then that im pretty much out of ideas. there was a few other programs I installed too. evga precision, fraps, nvidia system tools, nvidia system monitor. I restored my system to a point before installing these programs so it cant be those but it hought id add em to the list anyway just to be safe. I didn't however restore to before getting the new C++ file
View 2 Replies
View Related
Feb 8, 2013
I installed a new SSD disk the other day, enabled AHCI and changed boot order so that the SSD was first and then booted with my Windows 7 DVD where I deleted the previous Windows installation that was on my regular HDD so that it became an unformatted drive. Then I installed Windows onto the SSD.
Now, sometimes when I boot my computer it reboots on the Windows logo only to go to recommend Startup Repair, but it works when I choose to boot normally this second time. Don't tell me I have to reinstall Windows just because I didn't unplug my two other (unformatted) drives when installing on the SSD?
View 9 Replies
View Related