I wanted to dual boot Win 7 64 with my vista 32 but after the install completes and the computer reboots it hangs on the Win 7 boot logo and then just stays there until i turn off the power button. It's kinda like the problem when you have a USB plugged in and the boot logo hangs except there's nothing plugged into the comp. Reinstalled again the the same result. When I look at the win 7 drive from vista it looks like all the files are all there but it just keeps hanging on that logo =(. What should I do?
Also when i try and boot into safemode it hangs on "Classpnp.sys"
I've looked elsewhere and seen that people solved this problem by updating bios but I have the latest version of mine =(
I am trying to dual boot Windows 7 Home Premium and Ubuntu 10.04 on my laptop (Toshiba Portege M400). I had Ubuntu 10.04 installed previously but I decided to wipe my hard drive before installing Windows 7. I used GParted to delete all my partition and setup two new ones. I formated the first partition as NFTS for Windows. After that, I proceeded to installing Windows. The first time I tried it, I was successful although I did need to reformat that NFTS partition I had made because it said that the partition table type (GUID) was not compatible. Windows 7 installed fine after that. However, when I try to install Ubuntu, it sees the whole disk as blank. I tried resolving this issue with GParted but that too saw the drive as if it were blank even though Windows 7 was installed. After that, I booted up the GParted Live CD once again and changed the partition table to MS-DOS. My Windows 7 boots up and goes through all the tasks before the first boot up. When it restarts for the first time, it fails to boot; it simply stays on the glowing Windows logo. I've tried formatting the entire disk through the Windows 7 disk and partitioning from there several times and I still get the same results.
Well it had been awhile since I reloaded windows and found out about win8 so I decided to try the new windows 8 release preview. After it installing it, It would go past the windows loading screen and leave a blank screen. Disappointed I went to load windows 7. Installed fine, but after the first restart it will not go past the windows logo screen.
When I say I'm reloading windows I am not formating my harddrive. I'm running a single harddrive setup and have 500gig of entertainment and miscellaneous I have not way to backup. I do the write over partition thing where it throws everything in a windows.old folder. I'm considering getting a solid state just to load windows to. Formatting the current drive is not an option.
I can boot to safe mode, but being this is a new install there is nothing I did to undo.
Last night, my computer spontaneously rebooted. When it got to the 'Starting Windows' screen, the animated windows logo never appeared. I rebooted. Tried running System Recovery. This time, the screen is "Windows is loading files..." The progress bar fills up and then freezes.
Tried booting into safe mode. Again, the "Windows is loading files" progress bar fills up and then freezes. Tried to reinstall Windows. Boots from DVD, then the "Windows is loading files" progress bar fills up and then freezes yet again. Have been running Memtest86+ for the last ~9 hours, no issues.
I recently built a computer, and tried to install Windows 7 OEM on it, but it gets stuck at the screen where it says starting windows and the logo appears. The logo gets smaller and larger. I've been told it might be something with the RAM, but tested it out and that's not the problem.
I had the same problem that others have had with the new nVidia driver causing a BSOD but mine seem to be a little worse off. After uninstalling the nVidia driver the default windows drivers caused my computer to just black screen after boot. I would see the windows 7 load screen but never the login screen (just black w/ no mouse). So I decided to fresh install by formatting and installing.
After fresh install the same problem happens upon first true boot I see the black screen only. After about 10-30 seconds the BSOD will appear saying it is there due to video card driver timeout. I dont know what i should try next since I am on my 3rd fresh install with the same problem. I installed XP again and all is fine with the most up to date video driver as well.
I just formatted my C-Drive and installed a fresh copy of windows 7 ultimate on it. After restart, I got the following screen - See image attached. Now Windows can't boot at all. I tried using a system repair disk but it doesn't work. I doubt if it is a hardware problem, since I can access the boot menu and its options, but as I said, running the repair disk fails, I keep on getting that screen when it restarts.
Yesterday I installed Windows 7 on my brother's PC. He had been using Vista previously. Upon booting to the installer, the "Starting Windows" screen would appear with the animated windows logo. This screen took 20 minutes of waiting to get past, so for ages I thought it wasn't going to work at all. Eventually I left it on long enough to get through to the first stage of installation. Everything went ok during install, I formatted the single partition on the HDD and told Win7 to install there. The next two times the install had to restart the computer, the huge delay on getting past the "Starting Windows" screen remained (keep in mind this is before/during the install). Vista had no such issues with boot times. And now that Windows 7 is installed, the boot issues remain, even after installing all available windows updates, updating graphics/mobo/sound/mouse/keyboard drivers, etc. I have checked the Event Log as I have read that you can diagnose possible boot problems in there, but there doesn't appear to be any Boot Events logged, all I see in the Diagnostics-Performance log are Shutdown events.
I have tried many things to fix it, such as removing various RAM modules, enabling/disabling various BIOS settings relating to USB/IDE (I don't use any IDE devices but thought I'd try)/RAID etc (also don't have my single HDD in RAID).
I was having trouble migrating my OS to a new ssd and received the "Bootmgr is corrupt system can not boot" screen repeatedly after restoring from system image, kept happening so I just decided on a fresh install. Install went well and was fully functional (eg drivers and devices) yet when restarting after installing microsoft office, I got the "Bootmgr is corrupt system cannot boot" appeared and now cannot get the pc past this point no matter how many reboots.
Right before a fresh install of Windows 7, I go into the BIOS and set the boot priority to boot from the CD first. So at what point during, or after, the installation do I go back into the BIOS and set the boot priority to boot from the Hard Drive?
I have installed windows 7 ultimate yesterday on my new SSD. it worked fine after i installed it.. today I started my PC and i noticed my windows is stuck at the Loading Screen.. Already did some research with no luck. I already tried to do Restore Point didn't work.
Ok so after years of running XP, I finally got an external HDD to back all my crap on and Windows 7 Ultimate. I backed up all my stuff, ran the win7 DVD through start up, reformated my hard drive, installed windows 7.
It installed fine, rebooted a couple of times through the install, finishes, and logs me to the desktop. Its all working fine, I can use the net etc. I shut it down to restart it, and it doesn't start back up. It gets to the bios window where it decides to start off the dvd or hdd, just prior to where it should normally change to the 'windows is loading' screen, and just sits there, blinking and doing nothing.
I've done three installs, I took out the hard drive, reformated it with another computer, made sure it had a ntfs file system, everything, it's working fine. But every single time I install windows 7, It logs me into the desktop for the first time, I can do everything fine, but then if I Shutdown or restart, it hangs on the screen prior to windows loading. I can't even choose a boot option.
I've seen some ideas on other forums, pulling the power out, resetting the bios/cmos, changing boot sequence, unplugging all non-essential hardware.. nothing. It's like as soon as I install windows 7 my hard drive isn't there anymore.
Specs: Abit AX78 - Latest BIOS version AMD 9950 quad core 2.6 4GB DDR2-800 ATi HD 5870 Western Digital 500GB
I tried to flash drive on another computer it worked fine, but on my desktop it will not..If i turn my dektop on without the flash drive it comes up and says Reboot and Select proper boot device or insert boot media in selected boot device and press a key.If i insert the flash drive it freezes..If i start the computer with the flash drive in, it wont even get to the screen it freezes at the screen that tells me to press f12 for this, esc for that etc etc.This person has the same problem..And I cant boot from my origonal Hard drive because I believe its gone bad, If i start it with that hard drive it says Reboot and select proper boot device, its like it doesnt even recognize it, which im guessing means its gone bad.. But it wont freeze with that hard drive, but I also cant do anything
The problem is this. I got a new GPU for my moms computer. She installed it, it worked fine. She played her game for a bit then went to restart the computer and now it wont work. It'll get stuck at the windows logo where it will pulsate but nothing else after (it just keeps doing that).The only other thing we can besides starting windows normally is doing Windows Start Up Repair. We don't get the option to start in safe mode ( I think. We we supposed to hit F8 while on the windows logo to do that?). When we run Start Up Repair, it goes to Windows with some kind of progress bar that just keeps going and going (it's not really a progress bar, more just to show that it's loading something I guess).When we try booting Windows from the disc, we get the same two options "Start Windows Normally" and "Start Windows Repair" or or something like that.The only things we have not tried yet are:*Letting Start Up Repair go for 15+ minutes (we went for 15 minutes but decided to try other things to fix the issue)Taking out the new card and putting in the old card *Going in to Bios and press F5 to set everything to default Resetting Bios (idk how to do this processes but I've reada bit and I can find a guide)We tried press F8, but that just takes us to the boot menu with a list of devices to boot from. If we try to boot from the device with windows on it, it just gives us the options to start Windows normally or run repair.For some reason, we just cannot reinstall windows. We set bios to boot from disc, we even try manually booting from disc via the boot menu, but no go. So booting from disc and repairing or something similar is apparently not an option. What could it be?I am thinking that it is an issue with the hard drive. I don't know. Any thoughts or opinions?I feel really bad at this point. I wanted to help out and I caused this headache Edit: I forgot to mention, I live several hours from her, so I cannot do anything manually myself. Any instructions or tips or whatnot I will have to give over skype
I'm not 100% sure if this is even the right place to post this, so sorry if it's in the wrong forum. I have a Asus N53S laptop runnin windows 7 32 bit and I am having some trouble with it. This will probably be a large post so bear with me, the first problem I started having was blue screens on startup. I was able to fix the computer by running Startup repair a few times (tool about 3-4 hours) after that it worked for a day but the next day when I turned on the computer it froze and the music that was playing turned into a loud droning noise. After that I ran the startup repair again it did not work so I did a system restore, it seemed to fix the problem but sadly on startup I started getting blue screens again and this time neither startup repair nor system restore would work (I get a message saying there was a unexpected error: the system cannot find the file specified. (0x80070002) please close system restore and try again) I re open system restore 5 times and I get the same message.I restart my computer , spam f8 and choose the use last known good configuration. After I restore everything to factory settings and finish installing my steam games and other files I Ty restarting the computer to see if it fixed the problem. It seemed to have worked however that night there was a particularly large windows update (90 or so a one time) I clicked shutdown and let it finish the updates while I went to sleep. The next morning I wake up and turn on the computer it finishes syncing the updates then stays at the starting windows screen ( the logo would not show up just those words and a black screen. After it sat like that for 10 minutes or so I hold the power button and try again ,this time it did the same thing but only for a few seconds and it ran startup repair itself , startup repair could not fix the problem.
i recently install new updates on my laptop , after downloading and installing and asking me to restart my computer ,i did choose to restart now . After booting up again it is now stuck on windows 7 logo screen on startup. I tried booting up on safe mode and last known good config. but it didn't work. Also tried to use windows installation disk but it doesn't work either it just keep loading on "setup is starting" also tried "repair my computer" option but it just show me just a plain black screen
i had a Toshiba satellite laptop l745d with a6 vision AMD graphic card,windows 7 ultimate x64 os , 4gb of ram quadcore
I have just installed (and reinstalled) Windows 7 Pro (32 bit) on my system, and get no boot animation... the number 7 morphing from the Windows logo.Instead I get the text Starting Windows and a small red dot in the centre of the screen!Windows does boot correctly and there seem to be no related issues, so I am not overly worried, though it is certainly od
I am running an Advent desktop PC and its stats are as follows; Intel Core i5-2310 CPU @ 2.90GHz 8GB RAM Win 7 64 bit.The problem I am having is when ever i boot up the computer it shows the Advent logo-screen where I can access the boot menu etc but then it goes to a black screen with a cursor/underscore flashing in the top left... This screen stays for quite a while and I am not sure if it stops because of a key I have pressed or just because it has run its course but after it disappears the computer goes back to the logo-screen for a moment and proceeds to boot up as normal except slightly slower than usual.It is a relatively new computer and it has no problems running at all once the boot up is complete it is fast and as friendly as ever.
i recently built a computer and got everything working . Now my problem is that after i shut down my computer for example at night and turn it on in the morning it will always get stuck in the windows 7 logo. I have to turn off the pc and turn it back on once or twice for it to boot correctly. Is there any way to fix this problem? I have windows 7 ultimate 64 bit and i have re-installed it twice already but still get this problem. This only happens when i leave the computer off for a long period of time.
I have this weird issue since i installed Comodo Firewall 3.9
I start the computer, the bios logo loads up, it takes 1.5 mins (like 10 sec before) till it continues to the windows boot manager, from there on everything works fine.
So far ive updated my bios, loaded the defaults without any success.
I also disabled my bios "quick boot" feature, and it seems that it lags for 1.5mins at the point where it checks that everything is ok, it says something like: CPU: amd athlon 64...xxxx, thats where it takes 1.5mins, then continues to test memory etc but that took too long for me, and i ran a memtest 2 days ago without any problems.
I wondered if it could be in any way possible that the firewall i installed is causing the problem, as far as i know its not officially Windows 7 compatible.
I had this problem 3 days ago...i ran the startup recovery and it worked fine.. the next day i tried turning on my laptop and the same blank screen after the logo...so i thought ill run the startup recovery but now it says cant fix it automatically..
I have just bought a laptop with OEM Windows 7 in it. There are some minor annoyances in it. When I switch on the laptop, a logo of the institute from which the laptop's seller got the laptop (the engineering institute presents a laptop to every student), appears then booting process continues as it should.
I wish to remove this logo. Also, CD/DVD Drive isn't visible in Computer.
I have a machine running windows 7 64bit and previously i had a 500gb hdd in the machine, i purchased a tv monitor of a friend who had upgraded his, but once i connected this through dvi i have the issue stated no signal past the windows logo upon boot. my friend came around to my house one night and solved this issue, he did something within the task manager and something else and by magic it worked, i think he said something about conflict of drivers i'm not too sure we are going back a few years. So i KNOW that my monitor works because it has been working for 3 years at least.Now my hdd failed so i recently upgraded for a nice new ssd super quick as we all know, i did a fresh install of windows and now i am having this same issue with my monitor not displaying and unfortunately for me this time i have not got a friend so close by to come and fix this again.so what i do know is that there is a fix somewhere within windows and that i do not have any faulty hardware or monitor, but i am stuck.
My computer worked great yesterday. I closed the lid as usual to end use and save screens. Turned computer on today and only HP logo shows. Left bottom corner says press escape for start up menu.
I can't access system recovery or most of the advance boot options. I have tried using repair cds and install cds but the computer refuses to boot from cd drive my laptop is an hp model g61. I don't really know what other specs you need I have noticed it always stops when loading a certain driver atipcie.sys. The full error I get is: "Stop: c0000135 the program can't start because %hs is missing from your computer try reinstalling the program to fix the problem". I'm not even sure what that program is.
trying to solve a problem on a dell inspiron n5010 running windows 7 when you switch it on it goes to the black boot up screen and you are given these options Launch startup repair(recomended) start windows normally
if i select start windows normally it goes to the windows start up logo but eventually freezes then crash to a blue screen than goes off immediatley before i can read the info on screen if i select the launch start up repair it goes to a blue screen with some small pics of leaves on and stays there and does nothing
Startup Repair Infinite Loop Recovery i have read this but i dont even get the grey option boxes just that blue screen background
I installed a raid combo card with sata and ide and also hooked up two ide drives now boot never finishes even if i boot with a backup drive or from a win pe dvd i have set bios back to defaults and still will not boot
