Windows 7 Will Not Boot Past Microsoft Logo
May 4, 2012
I can't access system recovery or most of the advance boot options. I have tried using repair cds and install cds but the computer refuses to boot from cd drive my laptop is an hp model g61. I don't really know what other specs you need I have noticed it always stops when loading a certain driver atipcie.sys. The full error I get is: "Stop: c0000135 the program can't start because %hs is missing from your computer try reinstalling the program to fix the problem". I'm not even sure what that program is.
View 7 Replies
ADVERTISEMENT
Feb 23, 2012
Alright I am running Windows 7 ultimate x64 on my newly built computer. My computer can successfully boot past the bios and get to the logo screen. Then I get to the Windows logo which is a hit or miss. Sometimes it will boot successfully and I will have no problems whatsoever and I can enjoy my computer without worrying about anything. Then sometimes it will get hung on the logo and it will just stop responding. I don't know if this is an issue with my HDD or maybe my power supply. I think that this may be a problem with my power supply because I notice that my keyboard LED turns of when it hangs like that. The only question then is "why is this not a consistent problem that I can isolate?"
Here are my specs:
Case: Coolermaster HAF 922
CPU: Core i7 3930k (3.2 ghz stock; will OC to 4)
Motherboard: x79 Asrock Extreme 4 (x5 sata 6.0 Gb, x2 usb 3.0 ports, PCI-e 3.0 support, and quad-channel memory)
RAM: 8 gigs (2x4 gig's) of 1600 DDR3
GPU: x1 Radeon 6870
PSU: 600 Watts
HDD: 500 gig's 7200 RPM (Seagate baracuda)
Cooling: closed loop liquid cooling, Tuniq TX-2 High Performance Thermal Compound, and the standard fans on the case
Optical drive: LG 12x Blu-Ray reader and DVD combo drive
Monitor: 22" LED 1920x1080 -- ASUS VS228H-P (21.5 viewable)
View 8 Replies
View Related
Dec 29, 2012
Windows 7 won't boot past logo. Will not repair when selected. Running in safe mode stops at Loaded:windowssystem32driversdisk.sys. Have tried to reload windows 7 and it says files are loading then comes back to the same point and locks at the windows logo.
View 2 Replies
View Related
Oct 21, 2012
I'm having incredibly annoying issues with my windows starting up on my asus g73sw laptop. It wouldn't go past the windows logo screen. I thought my hard drive was probably shot, so I replaced it with a brand new solid state drive, fresh windows install. Worked perfect for one day, then the same problem. Tried completely fresh installs twice since then and never transferred any files at all in case they were corrupted. The computer will load now, but not before sitting on the windows logo screen for 5 minutes or more. I have checked the BIOS to make sure the solid state drive is boot option number 1.
View 2 Replies
View Related
Dec 30, 2010
I just installed a new SSD and put a few programs on it. I boot windows XP from my current HDD. I also have a copy of windows 7 that has only been used once, so I was going to use another one of the installs from the disc for my computer. I wanted to put windows 7 on the new SSD, while leaving xp on the old HDD. I would then just make the SSD have boot priority, without having to worry about formatting the old HDD etc.
Well, when I put windows 7 in, and choose to boot from disc, it'll show the black screen where the loading bar goes to completion, then switches to a black screen where the colored balls form the windows logo, and finally the screen turns blue with some slight designs in the back (I believe it's the default windows 7 wallpaper). The mouse icon shows up, but that's it.
I can hear the disc stop spinning, and no additional windows pop up allowing me to complete installation and everything. I've reset all BIOS settings to default. I've tried making the SSD have boot priority over the HDD but it still freezes at the same spot. Everything I've done cause it to freeze at the same spot, actually. I've triple checked that all of my hardware is compatible with windows 7.
View 6 Replies
View Related
Jan 16, 2011
Call from sister, as follows:10 month old Advent- O/S Windows 7- NO new programmes installed/downloadedUsing Norton 360Turned it on 2 days ago, Windows logo appears, then screen freezes, goes blue and the following details:D3_D10 1.DLL are missingDWM.exeShe can get in via Safe Mode, managed to get into Task Manager and Norton was constantly runningAs I am a couple of hours away I suggested the following:[CODE]Also use Norton uninstall tool (know that an ordinary uninstall doesnt always work)Download from Microsoft the "Directx end user run time" programmeIs there another way of going back further on SR, to when all was working??Check her recent updates from microsoft and delete them (not sure how, but will investigate how to if needs be)
View 5 Replies
View Related
Jun 14, 2012
I am used to having the "old" Microsoft Word logo from XP. Lost it when I had to reconfigure my computer. How can I get it back?
View 2 Replies
View Related
Dec 29, 2011
WIndows 7 premium home version on a lenovo laptop freezing at splash screen. I can boot into safe mode just fine. Whereby I have to run a system restore back to an older date but the issue still comes back up and this seems to be especially true when trying to wake it from sleep mode.
View 2 Replies
View Related
Jan 20, 2012
From the 2 options given I chose "Start Windows Normally"....After pressing Enter it will not go beyond the black screen where it says "Starting Windows" and inmediately reboots to the "Windows Error Recovery" again.I then chose the other option which is "Launch Startup Repair", entered the Disk, wait for it to load system files but it reboots to the Disk loading the files again like an eternal loop.Tried the F8 Advance booting options, chose "boot in safe mode with command prompt", it starts loading but then it reboots itself again!!I don t know what is going on, this is very strange, yesterday I worked all day in the computer..My system specs are these:>XFX Nforce 750i SLI>Intel Core 2 Quad Q9400 @ 2666 MHz>3x2gb Corsair CM2X2048-6400C5 DIMM DDR2 PC2-6400U DDR2-800 (5-5-5-18 3-22-6-3)>ATI Radeon HD 4300/4500 Series>WD Caviar Blue 500gb
View 9 Replies
View Related
May 7, 2012
I am running an Advent desktop PC and its stats are as follows; Intel Core i5-2310 CPU @ 2.90GHz 8GB RAM Win 7 64 bit.The problem I am having is when ever i boot up the computer it shows the Advent logo-screen where I can access the boot menu etc but then it goes to a black screen with a cursor/underscore flashing in the top left... This screen stays for quite a while and I am not sure if it stops because of a key I have pressed or just because it has run its course but after it disappears the computer goes back to the logo-screen for a moment and proceeds to boot up as normal except slightly slower than usual.It is a relatively new computer and it has no problems running at all once the boot up is complete it is fast and as friendly as ever.
View 4 Replies
View Related
Jan 9, 2012
I have just bought a laptop with OEM Windows 7 in it. There are some minor annoyances in it. When I switch on the laptop, a logo of the institute from which the laptop's seller got the laptop (the engineering institute presents a laptop to every student), appears then booting process continues as it should.
I wish to remove this logo. Also, CD/DVD Drive isn't visible in Computer.
View 5 Replies
View Related
Mar 9, 2010
As the title says, I want to change the boot logo in windows 7. How I do that ?
View 6 Replies
View Related
Jan 16, 2013
I have a machine running windows 7 64bit and previously i had a 500gb hdd in the machine, i purchased a tv monitor of a friend who had upgraded his, but once i connected this through dvi i have the issue stated no signal past the windows logo upon boot. my friend came around to my house one night and solved this issue, he did something within the task manager and something else and by magic it worked, i think he said something about conflict of drivers i'm not too sure we are going back a few years. So i KNOW that my monitor works because it has been working for 3 years at least.Now my hdd failed so i recently upgraded for a nice new ssd super quick as we all know, i did a fresh install of windows and now i am having this same issue with my monitor not displaying and unfortunately for me this time i have not got a friend so close by to come and fix this again.so what i do know is that there is a fix somewhere within windows and that i do not have any faulty hardware or monitor, but i am stuck.
View 3 Replies
View Related
Sep 6, 2010
I am trying to dual boot Windows 7 Home Premium and Ubuntu 10.04 on my laptop (Toshiba Portege M400). I had Ubuntu 10.04 installed previously but I decided to wipe my hard drive before installing Windows 7. I used GParted to delete all my partition and setup two new ones. I formated the first partition as NFTS for Windows. After that, I proceeded to installing Windows. The first time I tried it, I was successful although I did need to reformat that NFTS partition I had made because it said that the partition table type (GUID) was not compatible. Windows 7 installed fine after that. However, when I try to install Ubuntu, it sees the whole disk as blank. I tried resolving this issue with GParted but that too saw the drive as if it were blank even though Windows 7 was installed. After that, I booted up the GParted Live CD once again and changed the partition table to MS-DOS. My Windows 7 boots up and goes through all the tasks before the first boot up. When it restarts for the first time, it fails to boot; it simply stays on the glowing Windows logo. I've tried formatting the entire disk through the Windows 7 disk and partitioning from there several times and I still get the same results.
View 3 Replies
View Related
Aug 6, 2012
In the chaos of moving to a new house yesterday, a box my friend was moving ripped and a bottle of beer smashed onto my open and powered on laptop, scattering both liquid and glass everywhere. We immediately powered down and removed the battery, and placed the laptop upside down and mopped up the excess liquid from the outside as much as possible, and set it to dry upside down on a towel.My laptop is a Lenovo U330, I had my brother install Windows 7 on it for me last year, but he kept the disks so I don't have any of them.Several hours & some blowdrying later, we attempted to start up the laptop (I would have preferred to wait longer, but I needed to know if mine would work in case I needed to borrow my friend's for the week). The laptop will load the lenovo startup screen, and then flash the windows loadings screen (with the option to press f2 or f12) for a few seconds before recommending that I run startup repair. Which if I select it, will freeze after a few seconds. Usually my laptop's pretty noisy, but while the battery light flashes as if there is activity going on, there's no noise coming from it at all.
View 7 Replies
View Related
Oct 8, 2012
trying to solve a problem on a dell inspiron n5010 running windows 7 when you switch it on it goes to the black boot up screen and you are given these options Launch startup repair(recomended) start windows normally
if i select start windows normally it goes to the windows start up logo but eventually freezes then crash to a blue screen than goes off immediatley before i can read the info on screen if i select the launch start up repair it goes to a blue screen with some small pics of leaves on and stays there and does nothing
Startup Repair Infinite Loop Recovery i have read this but i dont even get the grey option boxes just that blue screen background
View 7 Replies
View Related
Oct 23, 2011
I installed a raid combo card with sata and ide and also hooked up two ide drives
now boot never finishes even if i boot with a backup drive or from a win pe dvd i have set bios back to defaults and still will not boot
View 2 Replies
View Related
Mar 25, 2011
have done a few internet searches on this one, but the things to try that i have come across have not worked in reinstating the nice animated windows logo on start up of windows 7. I appear to have lost it after doing a windows system restore and am now left with the very dull green progress bar which is low res and boring!!
As i say i have tried the bcdedit and bcdboot commands that are listed on many sites as resolving this issue.
View 9 Replies
View Related
Sep 16, 2009
My problem is that windows 7 wont get past the loading screen when its loading the OS. I have noticed that it will work when i have only 2GB(one stick) in but when i try to put all 8GB(4 sticks) in, it wont work. This same thing happened when i was trying to install windows 7 from a fresh install.
View 9 Replies
View Related
Apr 27, 2012
Laptop couldnt bootup, windows 7 logo would spin halfway before entering system recovery.
System repair, memory diagnostic all did not help. Tried to enter safe mode, but it keeps reverting back to system recovery screen after I hold f8/f5.
Problem Signature 01: startup repair offline.
Problem signature 02: 6.1.7600.16385
Problem signature 3: 6.1.7600.16385
Problem signature 4: 21200685
Problem signatire 5 : Autofailover
Problem signature 6: 3
Problem signature 7: bad driver
View 5 Replies
View Related
Aug 26, 2012
i'm building an htpc with xbmc on my windows 7 so i'm trying to customize the boot process. I changed successfully the boot logo (win 7 one) and the boot logon screen. The problem is that my tv supports only 1280x720 res and not the 1024x768 that needs the new windows 7 boot logo, so it automatically starts with the old windows vista boot logo.Can i customize that too in win 7? If i can how can i do it? It's the same of windows vista?
View 3 Replies
View Related
Dec 13, 2012
Last night, my computer spontaneously rebooted. When it got to the 'Starting Windows' screen, the animated windows logo never appeared. I rebooted. Tried running System Recovery. This time, the screen is "Windows is loading files..." The progress bar fills up and then freezes.
Tried booting into safe mode. Again, the "Windows is loading files" progress bar fills up and then freezes. Tried to reinstall Windows. Boots from DVD, then the "Windows is loading files" progress bar fills up and then freezes yet again. Have been running Memtest86+ for the last ~9 hours, no issues.
Specs: MSI 790FX-GD70 | AMD Phenom II X4 945 | 4x2GB G.Skill Ripjaws DDR3-1333 | 1x80GB Intel SSD (OS) | 2x1TB Samsung Spinpoint F3 7200RPM HDD (other) | 1x2TB WD Elements external HDD (backup) | XFX RadeonHD 6870 1GB GDDR5
View 7 Replies
View Related
Dec 24, 2012
I got new HP Slimline desktop and i change the OS to Win 7 Ultimate 32bit.But since i installed new Win the OS seems to boot normally (you can hear logon session sound), but the image of win boot remains freeze in the display.Even, you can shutdown the system pressing once the power button, hear the sound, wait few seconds and pc turn off.
View 2 Replies
View Related
Jun 12, 2011
I have an ACER extensa 5630Z. It's been running all day, and I looked over and it had restarted and got stuck at a blank screen with a blink cursur, Every reboot will show the Acer splash screen, then straight to the blank screen with the blinking cursor. Any ideas what I can do to fix this? I've hit F2 and can get into the bios, but other than that I don't know what to do..
View 3 Replies
View Related
Feb 10, 2013
I've been scouring the internet trying to fix a boot issue with my Dell XPS 420. It worked fine last week but on Saturday started to blue screen. I installed a new HD and installed a fresh copy of Win7 64-bit. I reinstalled my ATI video drivers but nothing else (e.g. I had to update a load of codecs for Win7 on the other install). I tried booting again from the original hard drive and everything came back with no errors. I left the PC up overnight, and now I get the same blue screen with various errors. So I disconnected from that hard drive and tried to boot from the fresh install, now it blue screens there as well. So I hit F8 and tried to boot in Safemode with Networking. Hangs at the casspnp.sys file. Then tried to boot from the DVD and repair but the repair only gets so far and yet another blue screen.I have 8gb of RAM onboard, and I have an ATI 2400 video card installed that is jacked into a Panasonic plasma display. Other than that, I've not customized anything else. I've ruled out the RAM as I swapped it out. Could be the DVD as it was having what appeared to be I/O issues. However, it seems to work fine with I press F12 and boot from the DVD. I have this PC connected to a Port Authority KVM. I've reset the KVM as well. I also have a USB hub in the mix as well. I reseated my RAM, the DVD cables.
View 14 Replies
View Related
Aug 8, 2011
I have an HP desktop with an Asus MB #M2N68-AM SE2.Sometimes it boots normally but lately it may be as long as 10 to 15 minutes to get past the Windows l7 flashing logo.
View 5 Replies
View Related
Sep 24, 2012
I plugged in a new hard drive planning to upgrade by cloning, then suddenly my computer restarts and it continuously cycles... I disabled the restart on automatic failure to see the bsod and it says: [code] I don't have the windows recovery disk.I can remove the hard drive and plug it into my laptop but I have no idea what to do from there..
View 7 Replies
View Related
Oct 7, 2011
I have a new toshiba laptop that the O/S failed to load after shutting down. It hangs at the bootup level when showing the windows logo.
View 1 Replies
View Related
Jul 18, 2010
I have been using my Windows 7 x64 system for about 5 months without a problem. I booted it yesterday, and an autoupdate occurred as soon as Windows 7 started up. It looked like this autoupdate made changes to /COMPONENTS. As soon as it finished, the system rebooted, and got stuck on the eVGA P55 splash screen. It was stuck there for about 10 minutes, so I manually shut down the computer. Every time I turn it on now, I get stuck on the eVGA P55 splash screen. I can not get into safe mode or anything. Any suggestions on how to go about fixing this? Did some stupid Windows autoupdate crash my new computer? I am turning those off if that is what happened.
View 9 Replies
View Related
Sep 24, 2012
I need help and suggestions on what to do with this black screen crisis. Mine is a little different that others. so sorry if this is a repeated thread. ive looked everywhere, and no one has the issue when they have dual boot.I have dual boot on my laptop with windows 7 ultimate 32 bit and windows 7 home premium 64 bit. the home premium came pre installed on the laptop and the ultimate version i installed later dual boot (i needed some capabilities that home premium doesn't have).I cannot see anything on my screen after windows logo while booting up my laptop bcz of the black screen after the windows logo. When i boot into WINDOWS 7 HOME PREMIUM. i hear windows logon screen notification noise but see nothing! oddly enough even my built in webcam logs me in with VeriFace software with my face, passwordless! ALSO my laptop boots fine with windows 7 ultimate and i can see everything, and it works great! i need the other version to WORK cause my life is in that other version of windows. i cannot factory restore!!!
What i have tried: the keyboard is also unresponsive, bcz i held down a bunch of keys to see if it makes the beep noise. I closed the laptop lid to see if it goes into hibernation and waited 3 mins to see if it still does, so that when i open it i can see everything (it has worked before). nothing. i rebooted a bunch of times even with a second screen attached, tried to guess switch into projector mode with my function key and switch screen/projector button. i have also done a power cycle. i think the registry is screwed, or maybe the graphics card drivers are ruined. have not done a registry repair through the other windows version (doing that next). i have defragged both partitions for both of the windows 7 versions through the one that works.What may have caused it: the last time i used home premium, i rebooted so that i can use the ultimate version (for the extra capabilities). i was not watching and it booted up in home premium, and the built in cam is so fast that i merely looked at the laptop and it logged me in. i was being unpatient, bcz you have to wait for the lenovo programs to load before you can restart. so i forced shut down (very bad idea) by holding the power button and booted up in ultimate finally while watching.
View 1 Replies
View Related
May 9, 2009
I have this weird issue since i installed Comodo Firewall 3.9
I start the computer, the bios logo loads up, it takes 1.5 mins (like 10 sec before) till it continues to the windows boot manager, from there on everything works fine.
So far ive updated my bios, loaded the defaults without any success.
I also disabled my bios "quick boot" feature, and it seems that it lags for 1.5mins at the point where it checks that everything is ok, it says something like: CPU: amd athlon 64...xxxx, thats where it takes 1.5mins, then continues to test memory etc but that took too long for me, and i ran a memtest 2 days ago without any problems.
I wondered if it could be in any way possible that the firewall i installed is causing the problem, as far as i know its not officially Windows 7 compatible.
Some specs that might be useful:
ASUS Crosshair (Newest bios)
AMD Athlon 64 X2 5200+
ASUS ATI EAH4850
2GB of DDR2 memory
Ask if you need any other information.
View 5 Replies
View Related
