I have an ACER extensa 5630Z. It's been running all day, and I looked over and it had restarted and got stuck at a blank screen with a blink cursur, Every reboot will show the Acer splash screen, then straight to the blank screen with the blinking cursor. Any ideas what I can do to fix this? I've hit F2 and can get into the bios, but other than that I don't know what to do..
View 3 RepliesAcer Aspire 4810TZ will not load past acer splash screen. It says F2 for setup at the bottom of the screen but, i press (keyboard works fine) but, it just keeps loading. So basically i have no access to anything from splash screen.I have removed battery, power cord - restarted without and both etc.I have not reset CMOS but, everything seems to power up and there is no other external device connected.I have reseated the RAM and additionally tried to boot without them, i noticed that trying to boot without RAM the motherboard didn't make any sounds.
View 4 Replies View RelatedI have been using my Windows 7 x64 system for about 5 months without a problem. I booted it yesterday, and an autoupdate occurred as soon as Windows 7 started up. It looked like this autoupdate made changes to /COMPONENTS. As soon as it finished, the system rebooted, and got stuck on the eVGA P55 splash screen. It was stuck there for about 10 minutes, so I manually shut down the computer. Every time I turn it on now, I get stuck on the eVGA P55 splash screen. I can not get into safe mode or anything. Any suggestions on how to go about fixing this? Did some stupid Windows autoupdate crash my new computer? I am turning those off if that is what happened.
View 9 Replies View RelatedWIndows 7 premium home version on a lenovo laptop freezing at splash screen. I can boot into safe mode just fine. Whereby I have to run a system restore back to an older date but the issue still comes back up and this seems to be especially true when trying to wake it from sleep mode.
View 2 Replies View RelatedWell i just got my new DVD-Drive today, so i burned a copy of the windows 7 ISO x64. i have backed up all my files and inserted the disc. when i reboot my computer it makes it past the windows is starting up screen. but then when i can see my mouse cursor with the little circle spinning, the circle stops and the screen stays at the blue screen, no pop up boxs to install or anything else i can do...
A74MX-K Foxconn MB
AMD Athlon x2 2.6ghz 5000+
HIS Radeon HD 4650
2 X 1GB Kingston RAM
300GB WD HDD
I'm not sure of the system specs of the computer in question.I bought it cheap off of a friend and he's doesn't remember the specs and I can't get into it to check them.When I start up the computer it loads with a new loadup screen (did not happen till after the problems started). The screen says Asus Motherboard A8N-SLI Deluxe. It then goes to a screen that shows PCI device listing.I'm not sure what it all is for.At the bottom it says "A disk read error has occurred" "Press Ctrl+Alt+Del to restart.Occasionally it skips this screen and instead goes to the windows 7 Splash screen, but regardless of which it goes to I can't do anything else except restart the computer.When I press F8, F10 or F11 it goes to either RAID Utility or Setup Utility and then I can't get any further with it without restarting and the aforementioned problems continue. I'm fairly certain it's a virus, my computer was showing signs of a virus in the days leading up to this problem but as Malwarebytes failed to show any problems with the computer when I scanned it I ignored the problems. I'm also aware that all I may be able to do is wipe the harddrive, and I'm fine with that.
View 7 Replies View RelatedWhen I start up the computer it loads with a new loadup screen (did not happen till after the problems started). The screen says Asus Motherboard A8N-SLI Deluxe. It then goes to a screen that shows PCI device listing . I'm not sure what it all is for. At the bottom it says "A disk read error has occurred" "Press Ctrl+Alt+Del to restart. Occasionally it skips this screen and instead goes to the windows 7 Splash screen, but regardless of which it goes to I can't do anything else except restart the computer.When I press F8, F10 or F11 it goes to either RAID Utility or Setup Utility and then I can't get any further with it without restarting and the aforementioned problems continue.my computer was showing signs of a virus in the days leading up to this problem but as Malwarebytes failed to show any problems with the computer when I scanned it I ignored the problems. I'm also aware that all I may be able to do is wipe the harddrive, and I'm fine with that.
View 3 Replies View RelatedWhen I get to the splash screen it just blinks. It won't boot. I've tried going into the safe mode by pressing F8 at the previous screen. I've tried booting from a start disk. It won't go into the advanced boot options, and booting from a disk made no difference. This has happened before but I was able to get in through safe mode. Once I get in I can do a system restore and it will work for a while. How can I get in to my machine?
View 3 Replies View RelatedI have a Dell Alienware Aurora ALX, Windows 7 64 bit system. A dell tech came to my house and replaced dead video card. No problems now. But i noticed when i boot up, it bypasses the Bios boot screen and goes directly to windows to login my password. It used to have an Alienware wallpaper background and you were able to see where it says hit f2 etc for boot setup. I no longer see that. I checked msconfig and the no gui is not checked off. i checked it and then re-checked it, no luck.
View 6 Replies View RelatedMy laptop boots to the splash screen and then hangs. I tried loading Safemode and it hangs at the screen indicating the list of drivers it is loading.
View 3 Replies View RelatedMy problem is that windows 7 wont get past the loading screen when its loading the OS. I have noticed that it will work when i have only 2GB(one stick) in but when i try to put all 8GB(4 sticks) in, it wont work. This same thing happened when i was trying to install windows 7 from a fresh install.
View 9 Replies View RelatedI had to do a "Windows repair" boot on a Windows 7 X-86 Windows 7 Pro machine. Now when I boot it up I get the boring "Vista" like blank screen with the Microsoft Bar instead of the nice "Windows 7 Windows starting " with the spinning Windows 7 cube.
View 5 Replies View RelatedI can't get into the BIOS options to see what's wrong or to boot from a flash drive or CD, either. It just sits at the startup screen with the HP logo and says something to the effect of "Press the ESC key for startu options". Pressing ESC, however, does nothing (none of the F keys help either, I tried that).Anyway, here's how I messed things up. I was trying to install openSuse to my Windows 7 computer. First I went into my start menu and searched partitions, so I could change those. When I was first installing openSuse told me it was going to format all of my partitions, so I backed out to change those manually. I shrank my largest partition, which has the Windows operating system on it by the maximum it allowed (16,142 MB or something like that. It was a little under 16 gigs).
After doing that openSuse told me it was going to install to sda6, I believe, and when I checked the memory of the partitions it seemed to match up. When I went to install it after making the changes, it didn't say that it would format my partitions. I figured that this meant I was good and everything would install fine, and it definitely appeared to. I didn't change any settings or anything, but instead just installed everything as default from my flash drive using the 4.7 GB DVD download for a 32 bit PC (mine is a 64 bit, but I wasn't paying attention).
Ok, so iv put this computer together, installed windows 7 Ultimate 32bit and i got it up and running perfect for like a day.
The next morning i switched it on and was working good for couple of hours then it seemed like the whole computer started to slow down and i got a blue screen error. so i rebooted and tried to start windows but, it then says windows is loading files then goes to the logo loading and after that it just goes to a black screen!? iv tried everything to get it back running safe mode, low res mode, repair, boot from disk etc but nothing.
So i thought i would try and put the HD in another computer and wipe it to re-install windows but when i put it in another comp it does the same thing.. does the logo loading and then to black screen
Iv found that when i remove the HD from my PC and boot from the windows 7 disk then it gets to the windows 7 installation bit so do you think it could be a problem with the HD?
I just reformatted my computer everything running fine until I accidentally in installed a Microsoft thing I don't remember the name... After uninstalling it quickly went to blue screen of death and now when I try to boot the oc it goes to the loading windows then blue screen of death and restarts. I've tried putting a disk in to reformat but it won't load the disk, it just shows the blue background you get while installing windows.
View 1 Replies View Relatedmy gateway 5260 stopped booting past the splash screen or loading screen in all instances...startup repair, loading windows normally and safe mode. It did this gradually first loading into safe mode and startup repair and now nothing boots up... i have changed my RAM... tried a recovery disk... tried himen's boot cd and trinity rescue kit 3.4...... tried windows defender scan.. no viruses... no RAM errors.
View 5 Replies View Relatedhaving problems with my PC rebooting since restarting to finish the installation of the latest Windows Update. Loads only to the Dell BIOS screen and then reboots again. I can hit F2 or F12, but not sure what to do when I do. I thought that running in Safe Mode and uninstalling the last update would be the way to go, but not sure how to get into Safe Mode.
View 4 Replies View RelatedI just wanted to throw this out there. The animation when windows is loading is the best loading screen for any OS I've seen. Anyone else have any thoughts on that part of the boot process?
View 2 Replies View RelatedCPU: Intel i5 2500kGPU: MSI GTX 560ti Twin Frozr IIMOBO: MSI p67a-gd65PSU: CoolerMaster gx 650OS: Windows 7 Home Premium - OEMAs the title states, Windows 7 will not load for me after the splash screen. Before this happened, I was having problems with my graphics drivers repeatedly crashing. I updated to the latest NVIDIA drivers and upon restarting the computer the screen had a shade of pink. I started to do a restore and when the computer rebooted, the screen went black after the splash screen with nothing but the mouse pointer.I went in to my UEFI click bios and ran a memory test which said the memory was fine. I tested a Visiontek Radeon 5750 which returned the same result, a black screen after the splash screen.The only thing that I can conclude is that there is problem with the operating system. I may however, be very wrong.Does this sound like an operating system error? If it is, I can get Windows 7 professional upgrade for $65 because I am a student. If this is not an operating system error
View 4 Replies View RelatedOkay so lately I've noticed that my PC isn't displaying the BIOS splash screen anymore and skips straight to the Windows login screen.It didn't really bother me until today when I wanted to boot into Ubuntu and I couldn't select which OS I wanted to use.I'm pretty sure the problem isn't the BIOS itself since I unplugged all the peripherals except the speakers, removed all the RAM and the BIOS did beep repeatedly. And given enough time, I can boot into windows (and only windows ).Apparently people have had this problem before and all the solutions I've read such as "Press 'del' to go into your BIOS!" really doesn't help since I can't see anything in my BIOS menu.The only solution that made sense to me was that my CMOS battery could be dying. I haven't changed my rig since I built it in 2009. The only significant event that happened recently might be that Windows updated itself.
-PC doesn't display BIOS splash screen
-Can't see messages displayed by system
-When windows does bootup, everything runs just fine
-Haven't changed rig for ~3 years
So basically over the weekend I shut my computer down because I was not going to be home. On sunday I go to turn my computer on and it hangs at the windows logo splash screen after POST. So I grab my laptop and start researching. I am able to get into safe mode with out any trouble only when I start windows normally do I run into problems. So here is what i have tried and with no success. Start up repair w/ and w/out disc, system restore, I have reinstalled windows 3 times, with 2 different versions, pro and ultimate and on first reboot I have the same problem. I flashed my bios about a year ago and have had minor issues since then that were all fixed by using krndbg and windows symbols server as a reference...
View 5 Replies View Relatedim having a problem with win 7 booting it get stuck on splash screen and when im trying to repair in the recovery mode it tells me that not all problems could be fixed and gives me these details: [code] i can boot with safe mode most of the times, some times it gives me blue screen and restart ,but if i unplug and then plug the power cable it works in safe mode.
View 4 Replies View RelatedI was trying to install windows 7 on another volume in my windows xp machine. I don't know if I was supposed to change in BIOS to the new volume or not, but I didn't. During the installation process when windows 7 rebooted the first time, it hangs at the mainboard splash screen. I'm on another machine right now, so I borrowed this data from a recent post:
System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU E4600 @ 2.40GHz, x86 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 2046 Mb
Graphics Card: NVIDIA GeForce 8800 GT, 512 Mb
Hard Drives: C: Total - 28003 MB, Free - 11849 MB; D: Total - 29996 MB, Free - 8332 MB; E: Total - 180464 MB, Free - 84723 MB; F: Total - 38154 MB, Free - 15970 MB;
Motherboard: Foxconn, 45CMX/45GMX/45CMX-K, , UYRL81513187
Antivirus: AVG Anti-Virus Free Edition 2011
The computer now also has two new Hard Drives:
I: Total - 200000 MB, Free, (appx) 190000 MB
J: Total - 800000 MB; Free - 800000 MB
It's on HDD "I" that I was installing windows 7.
I have a 2 month old Lenovo with Windows 7 Home Premuim. When the Windows Splash screen comes up, the PC Freezes. After about an hour i can login with no issues, but the event viewer shows many errors. the error is:
windows event id 7001 The Computer Browser service depends on the Server service which failed to start because of the following error: The dependency service or group failed to start.
I can also boot into Safe Mode just fine immediately after the freeze.
today after installing a windows update, my computer took forever to shut down. (5 minutes)after trying to start it back up, my motherboard splash screen hangs there for a good 10 minutes, then starts up.but after the splash screen goes away, a window shows up saying that overclocking has failed (even though i didnt overclock it)
View 6 Replies View RelatedI'm loading a new system and encountering a problem I haven't seen before. I have a Gigabyte Z77MXD3H motherboard with an Intel i5 3570 proc. When I boot to the Windows 7 install disk I get the BIOS splash screen, then the monitor goes so dim I can't read any text during the boot process but I can tell there is text on the screen. The monitor's menu also appears so dark its unusable. After some time the text mode finishes and the Windows install menu pops up and everything returns to normal. I can find loads of posts about black screens after windows boots, but not before.
View 1 Replies View Relatedproblem: windows will not boot past the "starting windows" screen. The processor gets really hot as if its trying to do something but it never makes it to the desktop.When I launch startup repair, the automatic startup repair tool always fails to fix the problem (surprise)When I view the problem details, I get this:[CODE]
View 1 Replies View RelatedI cloned a hard drive that had an image all set up with all kinds of programs and settings. Now that I put that cloned hard drive in a new computer (any) even the same exact harddware of an older computer, it gets BSOD and auto restarts. Tried startup recovery and no fixes found or worked.
View 3 Replies View RelatedBrand new Dell Precision M4700. You can restart or shutdown the laptop at numerous times and on occassion the laptop gets stuck at the splash screen (where the windows come together), and will sit there for hours on end. Sometimes a single hard reset will allow it to boot, and be on it's merry way. System runs great once it boots into Windows.I'm not running any external drives on it. I've encountered issue on and off docking station, or running on power and or battery.M4700 with core i7, 16 GB Ram, Quadro K2000M, 256 GB Seagate OEM SSD.I checked hard drive with HDTune, and it checked out okay, except for 1 communication error, so to be on the safe side, I had the drive replaced. Still did it.Did a repair installation of Windows 7, still doing it. There's nothing different installed on this machine that isn't the exact same as the M4600s at the office.Is there a log that can be looked at, and or turned on to see what's causing it to hang at the splash screen? A few times it will go past the splash screen, but never displays the welcome screen (displays just a black screen).
View 9 Replies View RelatedI regularly clean and reinstall windows on my computer, but this time it won't work. I am trying to upgrade my system from 32 bit to 64 bit, and when I try to boot (from DVD or flash drive) it gets to the windows splash page but never gives the option to install. It's just the mouse on a blue background.
I've done everything I can think of, even downloaded a pirated version to see if it would make a difference!
We just got a new HP Pavilion p6-2220t with Windows 7 Home Premium 64bit. The setup started out fine, booted/rebooted several times - no problems. Then the updates started coming in and after one of them (have not been able to determine which one) the HP splash screen does not come up any more, it starts to boot, then the Windows Boot Manager comes up and we need to select "Windows 7", (no other OS installed) a simple "enter" does the trick and everything boots up and runs like it's supposed to. I have tried to set the boot time to less than 30 seconds, but the screen just sits there until I press enter. I have run bootrec /fixmbr several times, no change. I have gone through all the diagnostics offered, even run sfc /scannow, everything comes up ok. - If I press ESC when I am on the Boot Manager screen it starts to boot but then gets stuck in a loop which does not stop. I have to shut down with the power button. So I don't press ESC again, but those two actions might be related. -- It bugs me when things aren't running the way they are supposed to, so I kept reading, searching. I thought it might be a software conflict so I reformatted and started from scratch - same results
View 2 Replies View Related