HP G62 - 144DX Won't Boot Past HP Screen?
May 16, 2012
I can't get into the BIOS options to see what's wrong or to boot from a flash drive or CD, either. It just sits at the startup screen with the HP logo and says something to the effect of "Press the ESC key for startu options". Pressing ESC, however, does nothing (none of the F keys help either, I tried that).Anyway, here's how I messed things up. I was trying to install openSuse to my Windows 7 computer. First I went into my start menu and searched partitions, so I could change those. When I was first installing openSuse told me it was going to format all of my partitions, so I backed out to change those manually. I shrank my largest partition, which has the Windows operating system on it by the maximum it allowed (16,142 MB or something like that. It was a little under 16 gigs).
After doing that openSuse told me it was going to install to sda6, I believe, and when I checked the memory of the partitions it seemed to match up. When I went to install it after making the changes, it didn't say that it would format my partitions. I figured that this meant I was good and everything would install fine, and it definitely appeared to. I didn't change any settings or anything, but instead just installed everything as default from my flash drive using the 4.7 GB DVD download for a 32 bit PC (mine is a 64 bit, but I wasn't paying attention).
View 9 Replies
ADVERTISEMENT
Nov 15, 2009
Ok, so iv put this computer together, installed windows 7 Ultimate 32bit and i got it up and running perfect for like a day.
The next morning i switched it on and was working good for couple of hours then it seemed like the whole computer started to slow down and i got a blue screen error. so i rebooted and tried to start windows but, it then says windows is loading files then goes to the logo loading and after that it just goes to a black screen!? iv tried everything to get it back running safe mode, low res mode, repair, boot from disk etc but nothing.
So i thought i would try and put the HD in another computer and wipe it to re-install windows but when i put it in another comp it does the same thing.. does the logo loading and then to black screen
Iv found that when i remove the HD from my PC and boot from the windows 7 disk then it gets to the windows 7 installation bit so do you think it could be a problem with the HD?
View 2 Replies
View Related
Aug 29, 2012
I just reformatted my computer everything running fine until I accidentally in installed a Microsoft thing I don't remember the name... After uninstalling it quickly went to blue screen of death and now when I try to boot the oc it goes to the loading windows then blue screen of death and restarts. I've tried putting a disk in to reformat but it won't load the disk, it just shows the blue background you get while installing windows.
View 1 Replies
View Related
Sep 16, 2009
My problem is that windows 7 wont get past the loading screen when its loading the OS. I have noticed that it will work when i have only 2GB(one stick) in but when i try to put all 8GB(4 sticks) in, it wont work. This same thing happened when i was trying to install windows 7 from a fresh install.
View 9 Replies
View Related
Jan 18, 2013
my gateway 5260 stopped booting past the splash screen or loading screen in all instances...startup repair, loading windows normally and safe mode. It did this gradually first loading into safe mode and startup repair and now nothing boots up... i have changed my RAM... tried a recovery disk... tried himen's boot cd and trinity rescue kit 3.4...... tried windows defender scan.. no viruses... no RAM errors.
View 5 Replies
View Related
Jun 12, 2011
I have an ACER extensa 5630Z. It's been running all day, and I looked over and it had restarted and got stuck at a blank screen with a blink cursur, Every reboot will show the Acer splash screen, then straight to the blank screen with the blinking cursor. Any ideas what I can do to fix this? I've hit F2 and can get into the bios, but other than that I don't know what to do..
View 3 Replies
View Related
Oct 6, 2011
having problems with my PC rebooting since restarting to finish the installation of the latest Windows Update. Loads only to the Dell BIOS screen and then reboots again. I can hit F2 or F12, but not sure what to do when I do. I thought that running in Safe Mode and uninstalling the last update would be the way to go, but not sure how to get into Safe Mode.
View 4 Replies
View Related
Jul 18, 2010
I have been using my Windows 7 x64 system for about 5 months without a problem. I booted it yesterday, and an autoupdate occurred as soon as Windows 7 started up. It looked like this autoupdate made changes to /COMPONENTS. As soon as it finished, the system rebooted, and got stuck on the eVGA P55 splash screen. It was stuck there for about 10 minutes, so I manually shut down the computer. Every time I turn it on now, I get stuck on the eVGA P55 splash screen. I can not get into safe mode or anything. Any suggestions on how to go about fixing this? Did some stupid Windows autoupdate crash my new computer? I am turning those off if that is what happened.
View 9 Replies
View Related
Dec 29, 2011
WIndows 7 premium home version on a lenovo laptop freezing at splash screen. I can boot into safe mode just fine. Whereby I have to run a system restore back to an older date but the issue still comes back up and this seems to be especially true when trying to wake it from sleep mode.
View 2 Replies
View Related
Jan 25, 2011
problem: windows will not boot past the "starting windows" screen. The processor gets really hot as if its trying to do something but it never makes it to the desktop.When I launch startup repair, the automatic startup repair tool always fails to fix the problem (surprise)When I view the problem details, I get this:[CODE]
View 1 Replies
View Related
Jan 20, 2010
I've been going on through this forum the past two days trying to figure out why my computer stays stuck on the welcome screen once I type in my password. I've done everything that has been in my power to do, from Disabling and uninstalling my nVidia graphics card driver to running a diagnostic with Avast! but nothing seems to work.I don't have a Windows 7 CD to repair the computer because I got a college student discount and downloaded it online. I also can SOMETIMES get into Safe Mode (when it happens is random, sometimes I get a black screen with my cursor present), but Safe mode with Networking has the same problem of not getting past that welcome screen.
My computer isn't frozen, as the mouse and the spinning circle are active. I'm not entirely sure what to do. The last time I used my computer was the morning of two days ago to watch stuff on Hulu with Firefox and play music with iTunes. I've had Windows 7 installed for maybe 3ish months now and have never encountered this problem.Note: I've also had that problem with iTunes and the Logitech G15 Keyboard where iTunes keeps forcing itself to the top, if that matters- - - - - Specs ModelASUS M50Vm-A1 Operating SystemWindows Vista Home emiumCPU TypeIntel Core 2 Duo P8400 2.26G Memory Size4GB DDR2Hard Disk160GB SATA 5400RPM Optical DriveDVD Super MultiGraphics CardNVIDIA GeForce 9600M GSVideo Memory1024MB
View 7 Replies
View Related
Oct 27, 2012
sung laptop (rv510) and when i load it up it won't load past the windows 7 screen dose anyone else have the same problem as me if you do and have fingered out how to fix this
View 5 Replies
View Related
Feb 16, 2012
Yesterday I was playing, surfin on my PC. Now when i tried to start windows it would not come pass the loading screen to my desktop. It will just restart the PC over and over again. I have tried to repair windows with my install CD but it cannot repair the problem. I have checked my boot device priority and it is in place. no strange configts or anything.
[code]...
View 1 Replies
View Related
Feb 25, 2011
I am having issues with my computer. I turned it on and logged in, and then the screen stays on welcome for a long time if not forever. I have tried to wait it out a few times and after 15-20mins it just turns black with a white mouse I can move around.
I have a Dell notebook and am not computer savy at all. I posted on another forum and was wondering what you guys think. They were very nice but it has been days now and I am lost on how to do this next step. Getting a second opinion, hope I don't offend them....
[URL]
You might have to scroll to read the entire thing, it is about two pages..
View 5 Replies
View Related
Mar 1, 2012
So one day I shut down my laptop (Sony Vaio, E series, VPCEB15FG, Windows 7 home premium 64-bit). The following day when I tried to turn it back on it refused to go beyond the welcome screen.. And it just kept restarting. So I started it in safe mode with networking and that seems to be working fine..
View 9 Replies
View Related
Jan 10, 2013
yesterday I found my computer wouldn't let me log in. I left it thinking that the computer would work after a few hours. anyway, next day came and i turned on my computer. After waiting for it to start, it went to the log in page. I couldn't type my password into the login page. But the blinking thing, (where you can type) id blinkying...however I can't even move my mouse cursor. Like its literally frozen. I restarted the computer, then pressed F8 continually. There came a series of options so that I could possibly get my compute to start working again.
- repair your computer Then a 'system recovery option' window opens up. There's 'system repair' <I did this, and it said that there was no problems> 'System restore', 'windows complete PC restore', 'windows memory diagnostic tool', 'command prompt', and TOSHIBA recovery wizard'. Yes it's a Toshiba laptop.
- safe mode
- safe mode with networking
- safe mode with command prompt
- enable boot logging
- enable low resolution video
- last known good configuration
- directory services restore mode
- debugging mode
- disable automatic restart on system failure
- disable driver signature enforcement
- start windows normally
I've done safe mode, last known good configuration and start windows normally.
View 9 Replies
View Related
Oct 29, 2012
i still cant get past the black trying to reboot windows installation cd but says no boot disk is detected and keyboard is not responding so i cant do anything its hp slimline desktop running windows 7
View 1 Replies
View Related
Jan 20, 2012
From the 2 options given I chose "Start Windows Normally"....After pressing Enter it will not go beyond the black screen where it says "Starting Windows" and inmediately reboots to the "Windows Error Recovery" again.I then chose the other option which is "Launch Startup Repair", entered the Disk, wait for it to load system files but it reboots to the Disk loading the files again like an eternal loop.Tried the F8 Advance booting options, chose "boot in safe mode with command prompt", it starts loading but then it reboots itself again!!I don t know what is going on, this is very strange, yesterday I worked all day in the computer..My system specs are these:>XFX Nforce 750i SLI>Intel Core 2 Quad Q9400 @ 2666 MHz>3x2gb Corsair CM2X2048-6400C5 DIMM DDR2 PC2-6400U DDR2-800 (5-5-5-18 3-22-6-3)>ATI Radeon HD 4300/4500 Series>WD Caviar Blue 500gb
View 9 Replies
View Related
Nov 11, 2011
I'm having some serious troubles with my main PC, my gaming PC, and it's really messing things up for me. I was just parusing around like usual on my computer, it runs Windows 7, and I allowed it to download the usual updates and restart itself. When it shut down and began restarting, I notice that it loads up the logo, briefly flashes what I think is called a Bios Post page, and then goes to a page that is nothing but a blinking "__" sign. It does nothing here, won't continue, and I can't enter or do anything. It just endlessly blinks, before disappearing and the computer screen shows nothing but black.
View 3 Replies
View Related
Jan 12, 2012
I've got a: Presario CQ62 notebook pc with a AMD Athlon(tm) II P320 Dual Core processor, and I can't get past the start up screen with the "starting windows" animation. It will show part of the animation then simply hang. I have a very bad battery but am keeping the computer plugged in. When I attempt a system recovery it says: "A disk read error occurred press ctrl+alt+del to restart" I've tried this many times and I get the same message each time. Beyond that I have no idea what to try.
View 2 Replies
View Related
Mar 15, 2011
I am, at this point, completely baffled how I can even interact with my computer. And frankly whether this should be in this part of the forum.The problem is with this machine. . My understanding of the situation is that I google'd "Winrar", and carelessly downloaded a malware-ridden version of the software from a fake site.
View 3 Replies
View Related
Oct 9, 2011
My mother's Toshiba laptop is less than a year old, and has been acting up lately. She doesn't download anything on it apart from windows updates, but she does have it set up to use a proxy server (through a legitimate service) so that she can watch her beloved BBC here in the U.S., which is mainly all she does on the computer. It suddenly started freezing/sticking on the blue welcome screen with the spinning circle when she tries to boot.(Sometimes it acts like it's doing something, sometimes it freezes. I left it for upwards of half on hour to see if it would finally get to the desktop, but it didn't.) I've tried starting it in safe mode with and without networking, to no avail. At one point, through logging in/waiting/closing the laptop/opening it again and such, I was able to "change user" and login, which did get me to the desktop. However, I wasn't able to do anything before it froze completely.Ctrl/Alt/Delete didn't help.
View 2 Replies
View Related
Sep 27, 2012
I use Windows 7 64-bit and it wont get past the start-up screen. I would like to retrieve some personal files from my hard drive before i reinstall windows, is there any way i can do this without removing my hard drive and as a last resort could you guys link to some good videos/guides that are in detail about removing your hard drive and inserting it into another computer.
View 8 Replies
View Related
Oct 9, 2012
Windows 7 machine working fine from 20 april 2011 - 5 October 2012 I found an old cd and stuck it in the machine to see what was on it. Turns out a few scanned hi-res images and a fujiimage viewer.exe file. I thought i'd open the image viewer and see what it was. Double clicked and away we went. I moved the mouse to navigate to the start of the image viewer and the computer froze (blue circle thinking icon) I waited 5 mins and then ctrl + alt + del to get to task manager. Pulled that up - image viewer not responding - so attempted to close the program from task manager. Poof windows lost all my desktop icons and went to the loading screen background not my desk top background. I waited another 5 mins and then hit th re-start button.So comp goes back to loadup - gets to the bit where windows is loading and the flag comes up all nice and shiny. Freezes. Reset. your computer falied to load. Options to check and repair or star windows normally. Start win normally, get to flag screen. freezes. back to your comp failed to load. go to repair. wait 1+ hours. windows cant repair. reboot. your comp failed to load (im getting sick of typing it let alone looking at the bloody thing). Start win safe mode. starts gets to log on. loads desktop. looks ok. restart. gets to logon. slowly ( i mean over 5 mins to get to desktop). gets to desktop. hit Ie falis to load. firefox fails to load. desktop greys out. try to shut down. takes 2 mins to get past logging off sign. then hangs on win shutting down sign. I reset again I knew bios battery was on it's way out so I changed that, also f8 at startup and chose load from last known good configuration. over 40 mins to get to desk top. after 2 mins of trying to click on the desktop icons greys out. cant pull up task manager.
View 9 Replies
View Related
Jul 12, 2012
I own an Asus F3E series, about 4,5 years old.Yesterday, as I was browsing the web, windows 7 crashed and I restarted the system only to find out that I couldn't get past the logon screen.After several tries which lasted several hours I decided to try system restore using the hidden partition. After I managed to Install vista (at first the installation kept failing on the first restart), I tried logging on.Sometimes it would get past the logon screen BUT after that I only saw a blue screen (not to be confused with bsod). After waiting for some minutes the system restarts.Safe mode won't work. It will crash on loading and will randomly restart or a bsod will come up. So, I can't access my pc in any way.
View 4 Replies
View Related
Nov 15, 2009
I am running a Linux OS right now and am trying to install windows 7.
I turn on he computer and run off the disc. It let's
me load off the cd but can't get past the starting windows screen. Above the
starting windows is a spot of color but no other graphic.
What do I do from here?
View 5 Replies
View Related
Nov 13, 2009
I just bought windows 7 for my desktop. It will load past the "windows is loading files.." page. then it will load to the "starting windows" page with the flag, then it loads to the normally welcome screen for windows 7 but nothing comes up.. its just the welcome screen background.
Anyone with info on this please reply.
View 3 Replies
View Related
Mar 28, 2012
When I boot up my laptop it tells me it was shut down improperly so I picked the recommended option . Then it seems to get past the dell logo with the loading bar under it, then the screen changes to where you have the option to choose a user but ere is not option or anything on the screen but the back round anything I can do to fix this.
View 1 Replies
View Related
Dec 4, 2012
So my computer, one year of age, started to stop loading at the windows loading screen. Last week, O was on my computer browsing the net and listening to music when I click on a button in iTunes and the computer crashes. I restart the computer but when it gets to the starting windows loading screen, it loads for a little bit like normal, but then the screen flashes black and the monitor says it loses signal and stays disconnected. The computer stays running even when the screen says there is no signal.
So I think for a bit and decide to just reload windows because my computer was starting to get cluttered anyway. So I reinstall windows without a problem and the computer runs fine for the weekend and Monday. But this morning it started to do this all over again.
I ran the windows repair disk and it told me that there is a device plugged in that should be unplugged and restart. But I had nothing plugged in so I tried unplugging almost everything short of the power cable and monitor, but still no luck.
View 3 Replies
View Related
Aug 6, 2012
In the chaos of moving to a new house yesterday, a box my friend was moving ripped and a bottle of beer smashed onto my open and powered on laptop, scattering both liquid and glass everywhere. We immediately powered down and removed the battery, and placed the laptop upside down and mopped up the excess liquid from the outside as much as possible, and set it to dry upside down on a towel.My laptop is a Lenovo U330, I had my brother install Windows 7 on it for me last year, but he kept the disks so I don't have any of them.Several hours & some blowdrying later, we attempted to start up the laptop (I would have preferred to wait longer, but I needed to know if mine would work in case I needed to borrow my friend's for the week). The laptop will load the lenovo startup screen, and then flash the windows loadings screen (with the option to press f2 or f12) for a few seconds before recommending that I run startup repair. Which if I select it, will freeze after a few seconds. Usually my laptop's pretty noisy, but while the battery light flashes as if there is activity going on, there's no noise coming from it at all.
View 7 Replies
View Related
Dec 19, 2012
I have windows 7 on my laptop and I attempted to update my OS to windows 8, which was mounted to a blank DVD, in hopes of wiping everything due to continuous blue screens of death and automatic restarts. It looked like the installation was going to go through until the system restarted and the windows Boot Manager screen came up. It says the digital signature for this file couldn't be verified. When I boot up windows 7, system ecovery tools appear. Startup repair doesn't do any good. I can't restore because of no restore points. How can I revert back to get my laptop working again? I don't have a windows 7 boot disc
View 9 Replies
View Related
