problem: windows will not boot past the "starting windows" screen. The processor gets really hot as if its trying to do something but it never makes it to the desktop.When I launch startup repair, the automatic startup repair tool always fails to fix the problem (surprise)When I view the problem details, I get this:[CODE]
View 1 RepliesI've got a: Presario CQ62 notebook pc with a AMD Athlon(tm) II P320 Dual Core processor, and I can't get past the start up screen with the "starting windows" animation. It will show part of the animation then simply hang. I have a very bad battery but am keeping the computer plugged in. When I attempt a system recovery it says: "A disk read error occurred press ctrl+alt+del to restart" I've tried this many times and I get the same message each time. Beyond that I have no idea what to try.
View 2 Replies View RelatedI am running a Linux OS right now and am trying to install windows 7.
I turn on he computer and run off the disc. It let's
me load off the cd but can't get past the starting windows screen. Above the
starting windows is a spot of color but no other graphic.
What do I do from here?
Upon start-up, two options are given: "Start Windows Normally" or "Launch Startup Repair (recommended)".If the Start Windows Normally option is chosen, then the starting windows screen comes up and stays. If I launch the startup repair option, then I still can not get the problem fixed.From the Startup Repair Screen however, I can launch command prompt and restore options,a restore is not really an option because I have not set up a restore point in a while.
View 4 Replies View RelatedWhile watching a live feed on the internet, it stopped responding, so i held down the power button on my laptop to turn it off with the aim of restarting it. Unfortunatley now it won't restart and freezes no the 'starting windows' page. I have tried safe mode with networking, restaring at last known good configuration, booting from cd and repairing but nothing has worked.
View 9 Replies View Relatedi am trying to install windows 7 ultimate, it's all legit.It worked fine during installation,but when it got to ( Completeing Installation )After the restart.it wouldnt load past windows 'starting windows'then it freezes on a black screen.it loaded in safe mode but got an error 'Installation Cannot complete in safe mode please restart and run windows normally.' but nothing happends normally.
View 2 Replies View RelatedI am trying to fix a friends labtop. I have been on the internet trying to find an answer but nothing works from answers on internet. When you turn the computer on it shows, Windows Error Recovery. Either Launch Startup Repair or Start Windows Normally. I use Launch Startup Repair and the screen goes blank after a couple of minutes the mouse comes up and can be moved but the screen stays blank. I have pushed buttons nothing has happened, it stays here, so I have to turn it off. It starts all over again. So I try Starting Windows Normally, it will just stay at the Starting Windows logo. It will stay here forever. The windows logo will fade with the color but it will stay here. I will then turn it off and try booting in Safemode. It starts with the drivers loading but then it freezes on Loaded:windowssystem32DRIVERSAtiPcie.sys. This is for all three of safemode options. I have tried all the other boots in the options and none of them work. They all will just freeze on starting windows or go to blank screen. So I tried to boot to Windows 7 CD. I put it in and nothing comes up. There is no Click on keys to boot from cd, but the cd does make noise like it is doing something. It will just be on a blank screen. I have also reset the bios to factory.
View 6 Replies View RelatedThis has been having about 3 times now. I'll install everything on 7, restart it, and I cant get back into Windows. I just did a system restore because I couldnt get back in
Is there anything I can do to prevent this in the future?
Btw, what happens is I get past "Windows is starting up" then its a black screen with a mouse cursor, and it stays there.
I have an said laptop and it won't start at all anymore, I turn it on and I get the said logo screen then it goes to "starting windows" screen and freezes with like a fuzzy blue line on top of the screen. I used my recovery CD and tried all 3 reformatting options and nothing works, after all 3 it just restarted my laptop and it continued to have the same problem again
View 11 Replies View RelatedAs stated in the title, my computer hangs at the "Starting Windows" screen.I'm using an iMac 9.1, with a bootcamp partition on Windows 7. (I can't access my Mac OS X partition at all).I don't have a Windows 7 Installation disk or any peripheral disks.I left my computer on all night and when. I woke up the next morning only to find out my computer just had a BSOD. I force shut down my computer then it just hung at the "starting windows' screen. Im assuming its a driver problem, since I can log in using safe mode. Also startup repair doesnt work, it just gives my a black screen.
View 3 Replies View RelatedUsing Win 7 x64, Intel i7 965, Asus Rampage 2, 32gb memory, 2 Intel ssd running RAID 0, 2 Seagate 500gb drives RAID 1. Had the Seagate hard drives fail, but were under warranty and they replaced them. Do NOT have them on-line at present time. Have tried to re-install system (had upgrade DVD for Win 7), but was not able to get the system to recognize the DVD because I can't get to OS. Am unable to get the system to do anything. Have checked BIOS to make sure drives are RAID. Since hardware comes up and ssd's come up,and graphics seems to be ok, am unable to figure out problem.
View 9 Replies View RelatedWIndows 7 premium home version on a lenovo laptop freezing at splash screen. I can boot into safe mode just fine. Whereby I have to run a system restore back to an older date but the issue still comes back up and this seems to be especially true when trying to wake it from sleep mode.
View 2 Replies View RelatedMy problem is that windows 7 wont get past the loading screen when its loading the OS. I have noticed that it will work when i have only 2GB(one stick) in but when i try to put all 8GB(4 sticks) in, it wont work. This same thing happened when i was trying to install windows 7 from a fresh install.
View 9 Replies View RelatedI have an ACER extensa 5630Z. It's been running all day, and I looked over and it had restarted and got stuck at a blank screen with a blink cursur, Every reboot will show the Acer splash screen, then straight to the blank screen with the blinking cursor. Any ideas what I can do to fix this? I've hit F2 and can get into the bios, but other than that I don't know what to do..
View 3 Replies View Relatedi was simply surfing through espn and Internet when i realized that my laptop (gateway nv79) was running quite slowly and then after a while it completely froze. i couldn't do anything, nothing i did would work . so unfourtunantly i had to hard shutdown it. and here's what happened after i rebooted it, it comes up with two options
1. start startup repair(recommended)
2. start windows normally
-i go to "start windows normally" and it goes to boot up normally, but then after the windows 7 logo appears it just stays there and nothing happens
-i go launch startup repair and it says loading files, but then it goes to a black screen with the logo � micosoft corporation and nothing happens
-i tried f8 advanced boot but it doesnt do anything
-i tried safe mode with networking, it says loading files and please waitt but even after 10 mins it just stays the same
-i dont have win 7 cd
I'm using a dell inspiron 1440 laptop, recently replaced my internal hard drive with a new solid state drive. It was working fine until today when I tried to boot my laptop up, and it gave me a BSOD before reaching the "Starting Windows" screen. Subsequent attempts at selecting the Startup repair and start windows normally options only gave me "failed to repair", and the windows logo getting stuck respectively. Safe mode cannot be started. However, when I tried to launch startup repair from my win 7 installation disk, I found that my HDD is not detected by my laptop. Subsequently, my laptop has also told me to reseat my hard drive. I reseated it a few times, but it did not solve the problem. Diagnostics ran on my laptop did not identify any problems.
View 3 Replies View RelatedI have been using my Windows 7 x64 system for about 5 months without a problem. I booted it yesterday, and an autoupdate occurred as soon as Windows 7 started up. It looked like this autoupdate made changes to /COMPONENTS. As soon as it finished, the system rebooted, and got stuck on the eVGA P55 splash screen. It was stuck there for about 10 minutes, so I manually shut down the computer. Every time I turn it on now, I get stuck on the eVGA P55 splash screen. I can not get into safe mode or anything. Any suggestions on how to go about fixing this? Did some stupid Windows autoupdate crash my new computer? I am turning those off if that is what happened.
View 9 Replies View RelatedMy laptop recently hang, so I just hard started it. On switching it on, it does not get beyond the Windows 7 logo.
View 1 Replies View RelatedBefore doing anything what i did was to write zeros on the HDD because i wanted to format completely the hard drive and get rid of any virus infecting the HDD.The problem is not on my DVD, i have used it in the past to fix/format many computers and also tried running the setup from another CD of windows 7 and also a Windows XP one but it freeze on the same point.It looks like this.So if it is not a DVD problem, what could cause it, how do i fix it.The Computer has no OS installed since i wrote zeros on the HDD (FULL DATA ERASE) When i try to do this clean install thing it just freezes on this point after loading the necessary setup files.I tried changing the BOOT SEQUENCE to 1-> CD, 2-> HDD, 3-> Other Removable Devices.I tried disabling the FLOPPY DISK from the Boot Sequence and CMOS (seen this in another thread).I tried other DVD's, not working,
View 2 Replies View RelatedI can't get into the BIOS options to see what's wrong or to boot from a flash drive or CD, either. It just sits at the startup screen with the HP logo and says something to the effect of "Press the ESC key for startu options". Pressing ESC, however, does nothing (none of the F keys help either, I tried that).Anyway, here's how I messed things up. I was trying to install openSuse to my Windows 7 computer. First I went into my start menu and searched partitions, so I could change those. When I was first installing openSuse told me it was going to format all of my partitions, so I backed out to change those manually. I shrank my largest partition, which has the Windows operating system on it by the maximum it allowed (16,142 MB or something like that. It was a little under 16 gigs).
After doing that openSuse told me it was going to install to sda6, I believe, and when I checked the memory of the partitions it seemed to match up. When I went to install it after making the changes, it didn't say that it would format my partitions. I figured that this meant I was good and everything would install fine, and it definitely appeared to. I didn't change any settings or anything, but instead just installed everything as default from my flash drive using the 4.7 GB DVD download for a 32 bit PC (mine is a 64 bit, but I wasn't paying attention).
Ok, so iv put this computer together, installed windows 7 Ultimate 32bit and i got it up and running perfect for like a day.
The next morning i switched it on and was working good for couple of hours then it seemed like the whole computer started to slow down and i got a blue screen error. so i rebooted and tried to start windows but, it then says windows is loading files then goes to the logo loading and after that it just goes to a black screen!? iv tried everything to get it back running safe mode, low res mode, repair, boot from disk etc but nothing.
So i thought i would try and put the HD in another computer and wipe it to re-install windows but when i put it in another comp it does the same thing.. does the logo loading and then to black screen
Iv found that when i remove the HD from my PC and boot from the windows 7 disk then it gets to the windows 7 installation bit so do you think it could be a problem with the HD?
I just reformatted my computer everything running fine until I accidentally in installed a Microsoft thing I don't remember the name... After uninstalling it quickly went to blue screen of death and now when I try to boot the oc it goes to the loading windows then blue screen of death and restarts. I've tried putting a disk in to reformat but it won't load the disk, it just shows the blue background you get while installing windows.
View 1 Replies View RelatedWindows wont boot up I get stuck on the "starting windows screen" Startup Repair cannot repair this computer automatically:
Problem signature:
�Problem Event Name: StartupRepair Offline
�Problem Signature 01: 6.1.7600.16385
�Problem Signature 02: 6.1.7600.16385
�Problem Signature 03: unknown
�Problem Signature 04: 21200718
�Problem Signature 05: AutoFailover
�Problem Signature 06: 10
�Problem Signature 07: BadDriver
�OS Version: 6.1.7600.2.0.0.256.1
�Locale ID: 1033
my gateway 5260 stopped booting past the splash screen or loading screen in all instances...startup repair, loading windows normally and safe mode. It did this gradually first loading into safe mode and startup repair and now nothing boots up... i have changed my RAM... tried a recovery disk... tried himen's boot cd and trinity rescue kit 3.4...... tried windows defender scan.. no viruses... no RAM errors.
View 5 Replies View Relatedhaving problems with my PC rebooting since restarting to finish the installation of the latest Windows Update. Loads only to the Dell BIOS screen and then reboots again. I can hit F2 or F12, but not sure what to do when I do. I thought that running in Safe Mode and uninstalling the last update would be the way to go, but not sure how to get into Safe Mode.
View 4 Replies View RelatedI turned on my computer today and it stayed frozen at the starting windows screen for. Long time, but it would not move on. Then it jumped back and started booting the computer again but hung at the same spot. I tried starting my computer in safe mode, but it won't boot into safe mode either. I can not do any of the system recovery options. Also by BIOS has a password on it and I have no clue what it is, So I can't not access my BIOS.
View 2 Replies View RelatedFirst time I've ever booted windows 7, it started up in literally 15 - 20 seconds. Now it takes about 2 minutes and stalls at the "starting windows" screen for about 1 minute. I'm not sure why this is happening.
View 12 Replies View Relatedhow do i get my acer aspire to boot, on screen msg is setup is starting servives and then theres abox comes on screen and says windows could not complete installation, to install windows on this computer, restart installation, and thats as far as it goes
View 2 Replies View Relatedsung laptop (rv510) and when i load it up it won't load past the windows 7 screen dose anyone else have the same problem as me if you do and have fingered out how to fix this
View 5 Replies View RelatedSo one day I shut down my laptop (Sony Vaio, E series, VPCEB15FG, Windows 7 home premium 64-bit). The following day when I tried to turn it back on it refused to go beyond the welcome screen.. And it just kept restarting. So I started it in safe mode with networking and that seems to be working fine..
View 9 Replies View RelatedFrom the 2 options given I chose "Start Windows Normally"....After pressing Enter it will not go beyond the black screen where it says "Starting Windows" and inmediately reboots to the "Windows Error Recovery" again.I then chose the other option which is "Launch Startup Repair", entered the Disk, wait for it to load system files but it reboots to the Disk loading the files again like an eternal loop.Tried the F8 Advance booting options, chose "boot in safe mode with command prompt", it starts loading but then it reboots itself again!!I don t know what is going on, this is very strange, yesterday I worked all day in the computer..My system specs are these:>XFX Nforce 750i SLI>Intel Core 2 Quad Q9400 @ 2666 MHz>3x2gb Corsair CM2X2048-6400C5 DIMM DDR2 PC2-6400U DDR2-800 (5-5-5-18 3-22-6-3)>ATI Radeon HD 4300/4500 Series>WD Caviar Blue 500gb
View 9 Replies View Related