Pc Get Past "Windows Is Starting Up" Then It's A Black Screen
May 1, 2009
This has been having about 3 times now. I'll install everything on 7, restart it, and I cant get back into Windows. I just did a system restore because I couldnt get back in
Is there anything I can do to prevent this in the future?
Btw, what happens is I get past "Windows is starting up" then its a black screen with a mouse cursor, and it stays there.
i am trying to install windows 7 ultimate, it's all legit.It worked fine during installation,but when it got to ( Completeing Installation )After the restart.it wouldnt load past windows 'starting windows'then it freezes on a black screen.it loaded in safe mode but got an error 'Installation Cannot complete in safe mode please restart and run windows normally.' but nothing happends normally.
I've got a: Presario CQ62 notebook pc with a AMD Athlon(tm) II P320 Dual Core processor, and I can't get past the start up screen with the "starting windows" animation. It will show part of the animation then simply hang. I have a very bad battery but am keeping the computer plugged in. When I attempt a system recovery it says: "A disk read error occurred press ctrl+alt+del to restart" I've tried this many times and I get the same message each time. Beyond that I have no idea what to try.
Upon start-up, two options are given: "Start Windows Normally" or "Launch Startup Repair (recommended)".If the Start Windows Normally option is chosen, then the starting windows screen comes up and stays. If I launch the startup repair option, then I still can not get the problem fixed.From the Startup Repair Screen however, I can launch command prompt and restore options,a restore is not really an option because I have not set up a restore point in a while.
While watching a live feed on the internet, it stopped responding, so i held down the power button on my laptop to turn it off with the aim of restarting it. Unfortunatley now it won't restart and freezes no the 'starting windows' page. I have tried safe mode with networking, restaring at last known good configuration, booting from cd and repairing but nothing has worked.
i still cant get past the black trying to reboot windows installation cd but says no boot disk is detected and keyboard is not responding so i cant do anything its hp slimline desktop running windows 7
I'm having some serious troubles with my main PC, my gaming PC, and it's really messing things up for me. I was just parusing around like usual on my computer, it runs Windows 7, and I allowed it to download the usual updates and restart itself. When it shut down and began restarting, I notice that it loads up the logo, briefly flashes what I think is called a Bios Post page, and then goes to a page that is nothing but a blinking "__" sign. It does nothing here, won't continue, and I can't enter or do anything. It just endlessly blinks, before disappearing and the computer screen shows nothing but black.
My computer was working fine yesterday. I didn't shut it down, but hibernated it. And went to sleep before it was fully hibernated. When i woke up, it was still on and the desktop was black. I tried to restart, But the desktop is still black saying "no analog input". But the processor is still running with beep sound and lights on. I tried changing the cable, unplugging everything and pressing on the power button for few seconds but no use.
Regardless of what I choose, it goes to the "Starting Windows" screen, and shows the Win7 animation, then it shows a black screen with just a mouse cursor I can move around, but nothing after that. Normally it shows the Win7 login screen. Ctrl + Alt + Del does nothing.I've tried powering off the tower entirely and unplugging and then powering back on, but I always get the same Safe Mode prompt, and the same black screen.
I have an said laptop and it won't start at all anymore, I turn it on and I get the said logo screen then it goes to "starting windows" screen and freezes with like a fuzzy blue line on top of the screen. I used my recovery CD and tried all 3 reformatting options and nothing works, after all 3 it just restarted my laptop and it continued to have the same problem again
As stated in the title, my computer hangs at the "Starting Windows" screen.I'm using an iMac 9.1, with a bootcamp partition on Windows 7. (I can't access my Mac OS X partition at all).I don't have a Windows 7 Installation disk or any peripheral disks.I left my computer on all night and when. I woke up the next morning only to find out my computer just had a BSOD. I force shut down my computer then it just hung at the "starting windows' screen. Im assuming its a driver problem, since I can log in using safe mode. Also startup repair doesnt work, it just gives my a black screen.
Using Win 7 x64, Intel i7 965, Asus Rampage 2, 32gb memory, 2 Intel ssd running RAID 0, 2 Seagate 500gb drives RAID 1. Had the Seagate hard drives fail, but were under warranty and they replaced them. Do NOT have them on-line at present time. Have tried to re-install system (had upgrade DVD for Win 7), but was not able to get the system to recognize the DVD because I can't get to OS. Am unable to get the system to do anything. Have checked BIOS to make sure drives are RAID. Since hardware comes up and ssd's come up,and graphics seems to be ok, am unable to figure out problem.
what could be wrong with my computer i hit the power button and it start and it says start windows normally but when i click on it after is says windows is starting it goes to a black screen with the cursor i can move the cursor but nothing else. it goes to the black screen before it will let me even log on to my computer
A few days ago my home built windows 7 computer did an automatic download. After the download installed itself I tried to turn on my computer. I got a black screen on my monitor. Was this download a virus?
i was simply surfing through espn and Internet when i realized that my laptop (gateway nv79) was running quite slowly and then after a while it completely froze. i couldn't do anything, nothing i did would work . so unfourtunantly i had to hard shutdown it. and here's what happened after i rebooted it, it comes up with two options
1. start startup repair(recommended) 2. start windows normally
-i go to "start windows normally" and it goes to boot up normally, but then after the windows 7 logo appears it just stays there and nothing happens
-i go launch startup repair and it says loading files, but then it goes to a black screen with the logo � micosoft corporation and nothing happens
-i tried f8 advanced boot but it doesnt do anything
-i tried safe mode with networking, it says loading files and please waitt but even after 10 mins it just stays the same
problem: windows will not boot past the "starting windows" screen. The processor gets really hot as if its trying to do something but it never makes it to the desktop.When I launch startup repair, the automatic startup repair tool always fails to fix the problem (surprise)When I view the problem details, I get this:[CODE]
I'm using a dell inspiron 1440 laptop, recently replaced my internal hard drive with a new solid state drive. It was working fine until today when I tried to boot my laptop up, and it gave me a BSOD before reaching the "Starting Windows" screen. Subsequent attempts at selecting the Startup repair and start windows normally options only gave me "failed to repair", and the windows logo getting stuck respectively. Safe mode cannot be started. However, when I tried to launch startup repair from my win 7 installation disk, I found that my HDD is not detected by my laptop. Subsequently, my laptop has also told me to reseat my hard drive. I reseated it a few times, but it did not solve the problem. Diagnostics ran on my laptop did not identify any problems.
I have a laptop with Windows 7. I was playing games on it today and suddenly browser closed. Then everything else closed and logged out and my laptop completely shut down. When I tried to turn it on again, a blank black screen with a flashing underscore "_" comes up and none of my keys work. The F8 key does nothing. I have turned it off and on many times.
I'm having a black screen with a mouse cursor after the starting windows page. I was doing a scan using spybotsd, and I believe it might have accidentally deleted an important file which was mistaken as a virus.
I could not start any program after that, or click any folder as it prompted something about not recognizing the path. So I restarted my laptop, and this problem occurred. Safe mode has the same problem also. I tried the start up repair and windows memory diagnostic from the system recovery options and both showed no error. I do not have a system restore point and I do not have a windows 7 repair DVD. reformat my computer? Do not want to lose my data...
I'm currently running on a windows 7 ultimate OS(64-bit).
It just happened out of the blue. I just got the computer in november.I cant reboot it wont go passed this screen. It dont have a cd rom or anything like that?
I am trying to fix a friends labtop. I have been on the internet trying to find an answer but nothing works from answers on internet. When you turn the computer on it shows, Windows Error Recovery. Either Launch Startup Repair or Start Windows Normally. I use Launch Startup Repair and the screen goes blank after a couple of minutes the mouse comes up and can be moved but the screen stays blank. I have pushed buttons nothing has happened, it stays here, so I have to turn it off. It starts all over again. So I try Starting Windows Normally, it will just stay at the Starting Windows logo. It will stay here forever. The windows logo will fade with the color but it will stay here. I will then turn it off and try booting in Safemode. It starts with the drivers loading but then it freezes on Loaded:windowssystem32DRIVERSAtiPcie.sys. This is for all three of safemode options. I have tried all the other boots in the options and none of them work. They all will just freeze on starting windows or go to blank screen. So I tried to boot to Windows 7 CD. I put it in and nothing comes up. There is no Click on keys to boot from cd, but the cd does make noise like it is doing something. It will just be on a blank screen. I have also reset the bios to factory.
sung laptop (rv510) and when i load it up it won't load past the windows 7 screen dose anyone else have the same problem as me if you do and have fingered out how to fix this
So one day I shut down my laptop (Sony Vaio, E series, VPCEB15FG, Windows 7 home premium 64-bit). The following day when I tried to turn it back on it refused to go beyond the welcome screen.. And it just kept restarting. So I started it in safe mode with networking and that seems to be working fine..
My mother's Toshiba laptop is less than a year old, and has been acting up lately. She doesn't download anything on it apart from windows updates, but she does have it set up to use a proxy server (through a legitimate service) so that she can watch her beloved BBC here in the U.S., which is mainly all she does on the computer. It suddenly started freezing/sticking on the blue welcome screen with the spinning circle when she tries to boot.(Sometimes it acts like it's doing something, sometimes it freezes. I left it for upwards of half on hour to see if it would finally get to the desktop, but it didn't.) I've tried starting it in safe mode with and without networking, to no avail. At one point, through logging in/waiting/closing the laptop/opening it again and such, I was able to "change user" and login, which did get me to the desktop. However, I wasn't able to do anything before it froze completely.Ctrl/Alt/Delete didn't help.
I use Windows 7 64-bit and it wont get past the start-up screen. I would like to retrieve some personal files from my hard drive before i reinstall windows, is there any way i can do this without removing my hard drive and as a last resort could you guys link to some good videos/guides that are in detail about removing your hard drive and inserting it into another computer.
Windows 7 machine working fine from 20 april 2011 - 5 October 2012 I found an old cd and stuck it in the machine to see what was on it. Turns out a few scanned hi-res images and a fujiimage viewer.exe file. I thought i'd open the image viewer and see what it was. Double clicked and away we went. I moved the mouse to navigate to the start of the image viewer and the computer froze (blue circle thinking icon) I waited 5 mins and then ctrl + alt + del to get to task manager. Pulled that up - image viewer not responding - so attempted to close the program from task manager. Poof windows lost all my desktop icons and went to the loading screen background not my desk top background. I waited another 5 mins and then hit th re-start button.So comp goes back to loadup - gets to the bit where windows is loading and the flag comes up all nice and shiny. Freezes. Reset. your computer falied to load. Options to check and repair or star windows normally. Start win normally, get to flag screen. freezes. back to your comp failed to load. go to repair. wait 1+ hours. windows cant repair. reboot. your comp failed to load (im getting sick of typing it let alone looking at the bloody thing). Start win safe mode. starts gets to log on. loads desktop. looks ok. restart. gets to logon. slowly ( i mean over 5 mins to get to desktop). gets to desktop. hit Ie falis to load. firefox fails to load. desktop greys out. try to shut down. takes 2 mins to get past logging off sign. then hangs on win shutting down sign. I reset again I knew bios battery was on it's way out so I changed that, also f8 at startup and chose load from last known good configuration. over 40 mins to get to desk top. after 2 mins of trying to click on the desktop icons greys out. cant pull up task manager.
i would like some info or pointers on what i can do to get this laptop working, i have rebooted it in safe mode and it attempts to start up, it get to the point where the windows 7 blue log on screen shows up but does not have the login or user account part but the theme shows up
From day one after a fresh install on my then new machine i've noticed this. The welcome screen hangs for about 1 minute if i use a solid color for the desktop instead of a background. I fixed it about a year ago by using a background instead of a solid colo. I however hate backgrounds and much prefer black. So i made a solid black jpg and used that. Well, long story short, i think that background makes it take forever sometimes when opening a picture in windows photo viewer ! Fix one issue, the fix causes a new one. Welcome to the world of MS windows !!! I removed the background and pics then opened up immediately. So i seem to have a choice of either quick startup and slow jpg's or visa versa.
PS: the startup issue is obviously a bug in Windows 7, and i know this because I've had it happen on 2 other PC's.
My problem is that windows 7 wont get past the loading screen when its loading the OS. I have noticed that it will work when i have only 2GB(one stick) in but when i try to put all 8GB(4 sticks) in, it wont work. This same thing happened when i was trying to install windows 7 from a fresh install.