Windows Not Starting Up (black Screen)
Dec 24, 2012
My computer was working fine yesterday. I didn't shut it down, but hibernated it. And went to sleep before it was fully hibernated. When i woke up, it was still on and the desktop was black. I tried to restart, But the desktop is still black saying "no analog input". But the processor is still running with beep sound and lights on. I tried changing the cable, unplugging everything and pressing on the power button for few seconds but no use.
View 5 Replies
ADVERTISEMENT
Mar 27, 2011
Regardless of what I choose, it goes to the "Starting Windows" screen, and shows the Win7 animation, then it shows a black screen with just a mouse cursor I can move around, but nothing after that. Normally it shows the Win7 login screen. Ctrl + Alt + Del does nothing.I've tried powering off the tower entirely and unplugging and then powering back on, but I always get the same Safe Mode prompt, and the same black screen.
View 7 Replies
View Related
Dec 8, 2012
what could be wrong with my computer i hit the power button and it start and it says start windows normally but when i click on it after is says windows is starting it goes to a black screen with the cursor i can move the cursor but nothing else. it goes to the black screen before it will let me even log on to my computer
View 1 Replies
View Related
Dec 14, 2012
A few days ago my home built windows 7 computer did an automatic download. After the download installed itself I tried to turn on my computer. I got a black screen on my monitor. Was this download a virus?
View 1 Replies
View Related
Apr 28, 2011
i am trying to install windows 7 ultimate, it's all legit.It worked fine during installation,but when it got to ( Completeing Installation )After the restart.it wouldnt load past windows 'starting windows'then it freezes on a black screen.it loaded in safe mode but got an error 'Installation Cannot complete in safe mode please restart and run windows normally.' but nothing happends normally.
View 2 Replies
View Related
May 1, 2009
This has been having about 3 times now. I'll install everything on 7, restart it, and I cant get back into Windows. I just did a system restore because I couldnt get back in
Is there anything I can do to prevent this in the future?
Btw, what happens is I get past "Windows is starting up" then its a black screen with a mouse cursor, and it stays there.
View 4 Replies
View Related
May 15, 2011
I'm having a black screen with a mouse cursor after the starting windows page. I was doing a scan using spybotsd, and I believe it might have accidentally deleted an important file which was mistaken as a virus.
I could not start any program after that, or click any folder as it prompted something about not recognizing the path. So I restarted my laptop, and this problem occurred. Safe mode has the same problem also. I tried the start up repair and windows memory diagnostic from the system recovery options and both showed no error. I do not have a system restore point and I do not have a windows 7 repair DVD. reformat my computer? Do not want to lose my data...
I'm currently running on a windows 7 ultimate OS(64-bit).
View 7 Replies
View Related
Feb 10, 2013
It just happened out of the blue. I just got the computer in november.I cant reboot it wont go passed this screen. It dont have a cd rom or anything like that?
View 2 Replies
View Related
Jul 12, 2012
Currently I am running a Windows 7 machine, with a 22 Widescreen LG monitor as my main and a 19 Normal Aspect NEC as my second monitor to the right. I'm also running an nVidia GTX 570. With 285.79 drivers, all is well. However, when I try to upgrade, and I've tried to upgrade to all drivers since, anytime I start up a DX10 or DX11 game (mostly BF3) my main screen offsets approximately 3 inches to the left pushing the game off to the left about 3 inches and leaving a black bar about 3 inches on the right side. This can be fixed by screwing around with the resolution settings and eventually all is fine, but I shouldn't have to screw around with anything.
Other games such as Dragon Age 2 and Battlefield Bad Company 2 actually require me to change my resolution from 1680 x 1050 to 1440 x 900 (I run my screen in 1680 x 1050)
View 6 Replies
View Related
Jan 19, 2013
Then I asked a computer guy on STEAM and he said to try a fresh install of windows, but I already have windows 7 Home premium from the (irl)store.After trying to update the BIOS I've only failed, I've failed and failed.This happens on DiRT Showdown too, and Call OF duty Blackops 2.
-Gigabyte
-AMD FX(tm)-8120 Eight-Core Processor
-CPU speed: 3.1Ghz
-Ram: 8.2gb
-OS: Microsoft Windows 7 Home Premium Edition Service Pack 1 (build 7601), 64-bit
-Video Card: AMD Radeon HD 7800 Series
View 5 Replies
View Related
May 12, 2012
My wife did something on her PC (she doesn't know exactly for sure what & can't explain it completely me), and now she can't boot up her PC. She says it had something to do with changing the security settings for a program she uses a lot so it wouldn't keep asking her if she wanted to launch it, and that's when it told her to restart the PC, then it wouldn't boot up anymore.When you reboot, the screen eventually goes to a black screen saying "Windows failed to start. A software or hardware error may be the cause" or something to that effect. It offers me the option to "Launch Startup Repair" or "Start Windows Normally".If I Launch Startup Repair, nothing much happens --- it says it's adding files, then it looks like Windows is about to boot up, then it goes to a black screen for a long time & nothing happens.
If I choose Start Windows Normally, it simply reboots & eventually brings me back to the same screen again.I've tried using rebooting and selecting ESC to get to the boot menu, then installing the Win 7 installation disc & selecting the DVD drive, then I select thelanguage, then I click Repair, but it sits there forever with nothing happening.I also tried an outside boot disc I found on the web & it doesn't launch.
View 9 Replies
View Related
Sep 2, 2012
My son has a Toshiba Satelite P205 that he just upgraded from Windows XP Home Premium to Windows 7 32-bit. After the upgrade completed the computer booted fine. The within 20 minutes he got the BSOD and the system rebooted. Now he can't get Windows to fully start. We've tried all of the options from F8 with no success. We have the Toshiba System Recovery Disk but it won't launch. (The Boot sequence has been changed to boot from CD/DVD and then the Hard Drive.)The Memory Diagnostic from the Windows 7 disk ran fine with no errors. I'm thinking I might need to re-format/wipe the drive to start fresh but don't know where to obtain a boot CD(no floppy drive on this laptop). Does anyone recommend a software that I can purchase to clear everything without destroying the CD/DVD accessibility so I can then use the System Recovery Disk to put it back to the original factory Settings?
View 1 Replies
View Related
Nov 12, 2011
I have an Acer aspire 5732Z. I turn my laptop on and it shows the starting windows screen then just goes to a black screen with a cursor. I tried to do systems restore but it said that I did not have a system restore point. I cannot start in any safe mode. I have all my pictures, uni work etc., and I am terrified I've lost it all. I've only had the laptop a year.
View 1 Replies
View Related
May 25, 2011
I have recently bought a computer and I have found that when I turn it on it runs normally until after the "Resuming Windows" screen, where everything turns off and the screen goes black. It had been running well for the last few days, so this came out of nowhere.I have searched this problem and I come up with a bunch of different solutions but no one agrees. The most common reason (apparently) is my version of Windows 7 Home Premium (x64) and I need to install something or other. But I can't even get to the desktop, and no one really explains it simply. [code]
View 3 Replies
View Related
Mar 24, 2012
Recently, my computer starts up windows and after the loading screen it just sits at a black screen forever with a cursor and it doesn't even make it to the log in screen. I have tried safe mode with the same results. What I've Done So FarTried to Repair Startup with Windows DVD Tried to use sfc /scannow at boot (Says pending changes and needs to restart) Tried logging into my Ubuntu partition and virus scanning (None found) Tried copying Reg Files from Regback into config while I was in Linux Tried to Repair Install (But I can't log into Windows ) Tried to bootrec /fixmbr /fixbot /RebuildBcd (Which destroyed my dual boot linux grub, but I was desperate. And still nothing) Interestingly though, after I do /RebuildBcd command it says something like "Found Windows Installations: 0" Tried to System Restore (Gave me an Error, wouldn't you know) At this point I'm not to confident that this can be fixed. If anyone has any ideas I'm willing to try. Or if you have any snazzy suggestions on how I could fix it using another computer, I have a different Windows Pro x64 computer that I can put the HD in if there's someway I can save my data/fix it/repair install from there. I just don't know how.
Edit: I finished the chkdsk and there were no bad sectors, though it did give me a message "Failed to transfer logged messages to the event log with status 50."I did a Windows Defender Offline scan with no viruses and I'm currently scanning with Kaspersky Rescue disk. I don't believe it is a virus, I think it's a corruptregistry at this point. I had just cleaned my registry with CCleaner before the shutdown that led to this >.<
View 9 Replies
View Related
Nov 16, 2009
i recently just installed a clean install of windows 7(instead of a upgrade from my vista.i got the free upgrade),now everything works fine expect when after the windows 7 splash occurs there is about a 10 second delay were the screen is just black with a cursor.
View 9 Replies
View Related
Jan 12, 2012
I've got a: Presario CQ62 notebook pc with a AMD Athlon(tm) II P320 Dual Core processor, and I can't get past the start up screen with the "starting windows" animation. It will show part of the animation then simply hang. I have a very bad battery but am keeping the computer plugged in. When I attempt a system recovery it says: "A disk read error occurred press ctrl+alt+del to restart" I've tried this many times and I get the same message each time. Beyond that I have no idea what to try.
View 2 Replies
View Related
Aug 13, 2012
I seem to have a odd issue with my laptop. Sometimes when i boot into windows there would be a blank screen with a mouse cursor after the starting windows screen. I would have to wait for approximately 5 minutes for it to show up my logon screen. I've been having this issue since the start of the year and have attempted to solve it but they have been unsuccessful. Things i've tried:Reformat Windows (Did it 4 times)Purchasing a SSDReduced the start-up items(barely any)?
View 14 Replies
View Related
Sep 26, 2009
Is there a way to change the background image that displays during boot before it gets to the login screen?
View 5 Replies
View Related
Sep 11, 2012
Doing a Normal startup, or booting from the Windows 7 cd it will get so far as the Starting Windows screen, the Microsoft copy-write shows up briefly greyed out some, and just sits there. In Safe Mode, it loads everything seemingly, lastly avgidsha.sys, then sits on Please wait...I have narrowed it down to hot the HDD or memory. I've put another HDD with Windows 7 on it, getting the same results. The MemTest 86+ cd actually loads and runs, came up 100% with no errors. Other suggestions that I have found use bootable CDs that want to start Windows first.The Windows 7 CD, Windows Defender Offline, Windows Recovery disk all get stuck at the same place as the HDD, the Starting Windows screen
View 8 Replies
View Related
Nov 15, 2009
I am running a Linux OS right now and am trying to install windows 7.
I turn on he computer and run off the disc. It let's
me load off the cd but can't get past the starting windows screen. Above the
starting windows is a spot of color but no other graphic.
What do I do from here?
View 5 Replies
View Related
Jan 18, 2010
I have installed WIN 7 64 and it has developed a problem..It wont boot to the desk top. It will post and go to the starting Windows screen and stops there..It wont go to safe mode.Is there a way to make a boot disk to get it to start or any kind of a diagnostic disk that a dummy can do?
View 7 Replies
View Related
Jul 20, 2012
When ever I turn my computer on it is always stuck on the Starting Windows screen and when I try and do it in safe mode it works but was I am signed in all that shows up is a black screen with Safe Mode in each corner. I have also tried start up repair but it says it can not find a problem or it will just continually search for a problem (waited 4 hours then I just turned it off)
View 7 Replies
View Related
Dec 4, 2012
I made a new PC and powered it up, first I received an error 'CPU FAN ERROR' then I went into bios and deactivated fan control. From their onwards I have been encountering blue screen during starting windows. The copy of windows 7 is pirated.. just to mention.
View 2 Replies
View Related
Jan 9, 2012
My Asus G73-JH laptop is currently freezing at the Windows Starting screen. I've read a lot of other forum posts that feature the same problem, BUT there is artifacting (bunch of colored dots) on the top of this screen that goes across the "Starting Windows" screen in a sort of horizontal line. Sometimes it just goes straight to the "Windows has failed to startup" screen. None of the System Recovery Options from the Startup Tool seem to help fix the problem, they've all been tried. Trying to boot in safe mode doesn't work either, as after it starts to load the files, the artifacting appears on the top again after about the third file and it freezes.
I have not made ANY major changes to anything on the system for over two months prior. Because of the artifacting seen, I imagine the video card is fried or malfunctioning. I called Asus and all they suggested to me so far was to reformat, because apparently they think its a driver issue, but I'd like to consider myself fairly tech savvy and believe that there has got to be a better solution that does not involve reformatting the hard drive, as I had a lot of important data that had been stored and not backed up the previous night before the unexpected freezing. The only things I seem to have access to is BIOS and the Startup Tool. I have a System Recovery Disc too, and am curious if there is a solution to this problem (I am not well versed in BIOS), and (assuming the video card is shot) if there would be a way I can access by data and possibly back it up before reformatting so I can persuade Asus support that my card is in fact shot so I can send it in for a replacement!
View 1 Replies
View Related
Jun 11, 2012
Upon start-up, two options are given: "Start Windows Normally" or "Launch Startup Repair (recommended)".If the Start Windows Normally option is chosen, then the starting windows screen comes up and stays. If I launch the startup repair option, then I still can not get the problem fixed.From the Startup Repair Screen however, I can launch command prompt and restore options,a restore is not really an option because I have not set up a restore point in a while.
View 4 Replies
View Related
Jul 7, 2012
While watching a live feed on the internet, it stopped responding, so i held down the power button on my laptop to turn it off with the aim of restarting it. Unfortunatley now it won't restart and freezes no the 'starting windows' page. I have tried safe mode with networking, restaring at last known good configuration, booting from cd and repairing but nothing has worked.
View 9 Replies
View Related
Dec 26, 2012
I recently purchased a Dell XPS 15 (l521x) that came with Windows 8. The system boots from the hard drive through UEFI by default, so I think the hard drive is already GPT. I am attempting to install Windows 7 from a UEFI bootable USB. The system goes through the 'copying files' phase and then goes to the Starting Windows screen. As the colored dots of the Windows logo are circling, the system freezes. Can someone help me fix this problem? The following are the steps I took in order to install Windows 7:
- Formatted a brand new 4GB USB drive to FAT32
- Downloaded Windows 7 ISO (I have a key)
- Extracted ISO files to USB
- Made adjustments so that USB is UEFI bootable (efi/boot/bootx64.efi)
- In BIOS, set SATA Operation to AHCI and disabled Secure Boot
- Select USB drive from UEFI boot menu
View 9 Replies
View Related
Oct 23, 2009
i created a partition and formatted it of 70gb to install windows 7 in it. Im obviously using the clean install method, everything goes fine. It expands the files, it installs them,copies them, etc. When my system is booting up, it shows me the screen of windows below saying "windows is starting up", the problem is that windows never starts up, i left it for a night, and it didnt start up, it just stayed there. Im trying to install windows 7 64bit, any help would be greatly appreciated.
View 9 Replies
View Related
Nov 17, 2009
When I run the Windows 7 Home Premium OEM disc I get past "loading files" and then freeze on "starting windows". I see 4 little colored balls in the center of the screen (guessing the start of the MSFT logo) and then everything freezes.
Here's what I've got:
Monitor: Samsung T260HD 25.5in Rose/Black LCD w/ATSC
HDD: 2 x Seagate 1.5TB Serial ATA HD 7200/32MB/SATA-3G
Memory: Corsair Dominator 6144MB PC12800 DDR3 1600MHz (3x2)
DVD: LG 22X DVDRW SATA
Motherboard: ASUS P6TD Deluxe Intel X58 Socket LGA1366 MB
Power Supply: Corsair 950w 80 Plus Power Supply
GPU: 5850 is backordered, so am using an old Nvidia 6600 GT to attempt to install Windows - connected to monitor with DVI cable
OS: Windows 7 Home Premium OEM
I've done lots of research and tried:
1. Using a PS2 keyboard/mouse
2. Disabling USB in bios
3. Disabling just about everything else in bios
4. Tried w/ 2MB, 4MB and 6MB ram
Any help or suggestions would be greatly appreciated.
View 33 Replies
View Related
Jan 6, 2012
a week ago my windows 7 ultimate crashed in the starting screen showing the dam blue screen and warning me that windows couldn't start. I went to the self repair tool.It tool like 4 hours to fix the issue. Then it said, that windows will start normally after that. What a lie. After the starting screen I got the black screen, just with the mouse. I tried everything I know, scanning the disk surface with other computer, I used the windows 7 installation CD. And that told me it couldn't find any issue starting windows. What can I try now? This happens evenwhen I boot normally or in any safe mode.
View 3 Replies
View Related
