Windows 7 64bits Got Stuck After The Starting Screen?
Jan 6, 2012
a week ago my windows 7 ultimate crashed in the starting screen showing the dam blue screen and warning me that windows couldn't start. I went to the self repair tool.It tool like 4 hours to fix the issue. Then it said, that windows will start normally after that. What a lie. After the starting screen I got the black screen, just with the mouse. I tried everything I know, scanning the disk surface with other computer, I used the windows 7 installation CD. And that told me it couldn't find any issue starting windows. What can I try now? This happens evenwhen I boot normally or in any safe mode.
Doing a Normal startup, or booting from the Windows 7 cd it will get so far as the Starting Windows screen, the Microsoft copy-write shows up briefly greyed out some, and just sits there. In Safe Mode, it loads everything seemingly, lastly avgidsha.sys, then sits on Please wait...I have narrowed it down to hot the HDD or memory. I've put another HDD with Windows 7 on it, getting the same results. The MemTest 86+ cd actually loads and runs, came up 100% with no errors. Other suggestions that I have found use bootable CDs that want to start Windows first.The Windows 7 CD, Windows Defender Offline, Windows Recovery disk all get stuck at the same place as the HDD, the Starting Windows screen
When ever I turn my computer on it is always stuck on the Starting Windows screen and when I try and do it in safe mode it works but was I am signed in all that shows up is a black screen with Safe Mode in each corner. I have also tried start up repair but it says it can not find a problem or it will just continually search for a problem (waited 4 hours then I just turned it off)
I recently purchased a Dell XPS 15 (l521x) that came with Windows 8. The system boots from the hard drive through UEFI by default, so I think the hard drive is already GPT. I am attempting to install Windows 7 from a UEFI bootable USB. The system goes through the 'copying files' phase and then goes to the Starting Windows screen. As the colored dots of the Windows logo are circling, the system freezes. Can someone help me fix this problem? The following are the steps I took in order to install Windows 7:
- Formatted a brand new 4GB USB drive to FAT32 - Downloaded Windows 7 ISO (I have a key) - Extracted ISO files to USB - Made adjustments so that USB is UEFI bootable (efi/boot/bootx64.efi) - In BIOS, set SATA Operation to AHCI and disabled Secure Boot - Select USB drive from UEFI boot menu
I just finished building my first computer in 8-9 years or so. I was quite excited that my computer booted first time I turned it on but my excitement was soon overwhelmed with defeat. Let me start by linking my computers specs. [URL] I downloaded windows 7 from my schools msdn website I have the key and everything. I then burned it to a dvd. After booting from my dvd drive the loading bar continues and finishes. The 4 colorful balls float around then come together and my computer gets stuck.
Now It's very important to note that I was able to get past this screen after restarting my computer 4 times and I was successfully able to load continue on to installing windows only to get stuck in the same screen while booting from my ssd. Then I thought this issue could've been caused by using my SSD. So I unplugged it and repeated the same process using my seagate HD same thing happened. When I try starting it in safe mode the computer continues on to loading windows but I get prompted to restart it in normal mode so that the installation can continue.
I dropped my laptop this weekend. But it still worked for a few minutes before it froze. So I powered it off and tried to turn it back on. It turns back on just fine, but will continuously load the "Starting Windows" screen. I tried doing diagnostics and repairs, nothing. When I load it in safe mode, it loads up until the ClassPNP.sys, and then freezes.
I recently built a computer, and tried to install Windows 7 OEM on it, but it gets stuck at the screen where it says starting windows and the logo appears. The logo gets smaller and larger. I've been told it might be something with the RAM, but tested it out and that's not the problem.
my laptop will not load up. I can get it to the screen where it says repair computer, safe mode and all that. (advance boot options) but anytime I click any off them it goes to a screen where it says I need to put in the windows installer disk. I do not have any disk but I downloaded the repair disc from my other laptop. I put the disk in the computer and restart it and it just goes back to same screen. It does not automatic rebot, or ask me to rebot from disk.
I recently upgraded my computers power supply and graphics card to brand new ones. When I oot my computer up, it is now stuck on "windows is starting" screen. When I try to boot in any of the safe modes, I load up to atipcie.sys then my computer freezes and never continues to load the rest of safe mode. When I click repair computer, I get stuck at the Blue windows screen, and as soon as it starts up a cmd box pops up then quickly closes before I could even read it. I also tried loading last working configuration but no luck. Even when I load boot recovery mode, a cmd box comes up quick then closes and continues to be stuck.
I am not trying to install Windows 7, it came on my computer and has been working fine for over a year now. I restarted my computer a few days ago (after it had been working just fine) and now it will not load past the "Setup is Starting Services" screen. I keep getting the error message "Install Windos: The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click 'OK' to restart the computer, then restart the installation." I cannot figure out why it is mentioning anything about installing windows when it came on the computer and has been working until now. I have hit "ok" and it does nothing but come back to the same stuck point. I do not have a disk for this computer as it never came with one. It is a Toshiba Satellite L455D.
win 7 stuck on starting windows screen after starting every time so i have to restart the sys tem severel times.i don't know pls give the solution.i'm using win7 ultimate
currently using home premium 32bit but got pro upgrade 64 bit so had to do the custom install from booting with the disk I choose the language, keyboard layout etc, choose custom install, pick the hard drive and it goes to the installing screen.
When part 2 of the install screen is almost done it said installation will continue after the computer restarts. After it restarts, it just stays on the "starting windows" screen and the windows logo never shows. It wa son there for hours. I restarted by pressing the restart button and it continued back on the step 2 and them same thing, restart and then continue later but now the screen is just stuck on the "starting windows" screen.
First time building a PC, trying to install Windows on my Crucial M4 via USB (don't have a disk drive...) and I get stuck on the "setup is starting" screen. If I try to boot with my older HDD that has Windows installed on it, I get a BSOD with error 7B.
My 2 year old $400 Acer laptop that has win 7 32 bit home edition locked up while surfing last night and I cannot get it to open.I tried safe mode it hangs up on the starting windows screen. I hit F8 and tried the launch start up repair function to no avail.When the laptop locked up the screen went off white like someone was trying to IM me and nothing opened. I pulled the battery out to shut the laptop down since I didn't like the look of what was happening and none of the buttons or other prompts would work.I have a current version of McAffe and was using Firefox.
if I try to boot it normally it gets blue screen and dies. The same thing happends if I use fail safe. (crashed at crcdisk)So I thought idd reinstall it. However when i boot up from my windows cd, I only get the 2 possibilities to "setup and recovery". No matter which of those I choose it goes to "loading files" and then to "starting windows".I've reinstalled quite a few computers, with xp and windows 7, and I've never had any trouble doing so. So i thought idd try to take out the hdd manually, but I realised I dont have the cables to connect it to my other pc, and clean the hdd that way.
The power in southern california today and when it came back on my computer wouldnt boot all the way to windows. I have tried booting fromt he cd but it does the same thing and just stays at the splash screen. I have tried recovery mode and it sticks at the windows is loading files bar. Safe mode doesnt work either as it sticks at one file and stays there the entire time.
I had just put this build together and occasionally when I boot up the computer, it would freeze at "Starting Windows" screen and will not go anywhere else until I hard shutdown the computer and boot it back up and hope it doesn't get stuck again.I reinstalled Windows 7 thinking it's the new SSD I bought but the problem still occurs, I also ran CHKDSK again and no errors have shown up.I haven't ran a memory test program yet to check my RAM but I don't think that is the issue since I do not get BSOD of any kind.I also have another problem that rarely occurs and only happens when watching you tube videos, the screen completely friezes and artifacts show up as if the video card is broken but I never have such problems while playing video games such as BF3 and Starcraft II.Anyhow, I have searched Tomshardware and the web but still cannot find a solution to this and I hope you guys can help me find what the problem is.I'm beginning to question my RAM, Motherboard, or SSD at this moment.
My laptop decided not to start up today. It shut down last night normally, today it keeps getting stuck on "starting window". I tried safe mode, but it gets stuck at starting windows. I tried starting from disk, it says loading files then it goes start to the starting windows and gets stuck. I tried pressing f8 but there is no repair computer option. Did my ssd die?
my computer crash while rebooting it and every time i try to turn it on it always say "setup is starting services" and it will say to restart it and i did restart it but it always go back to the setup starting services and just ask my to turn it off again. what should i do?
Firstly my laptop (which is a Dell Inspiron N5030 running Windows 7 64 bit) starting showing up with a black screen when it was trying to come out of hibernation, it gave the status as 0xc0000242 and saying there was a fatal error with the hiberfil.sys and that it would have to restart. This continued for a while with the laptop closing all the applications that I had open when I hibernated, sometimes it would come out of hibernation without any problems at all. Then my laptop started to become very slow and particularly when loading up windows after being shutdown, restarted or hibernated. It was staying on the "starting windows" screen for about 5 minutes before actually starting up. I did a system restore on the laptop but no luck. I did a CHKDSK error check on the laptop but had no luck. I did a start up recovery but once again no luck.
Yesterday I decided to back up all my data onto an external harddrive and reinstall windows 7 completely as I have had the laptop over a year now and it was getting pretty full of junk anyway. I thought the problem had go away but it has had all of the above problems today no aswell, it is CHKDSK checking at the moment and has found several unreadable segments.
I am trying to install Windows 7 through USB in my Dell studio 1555 Laptop. Every time it gets stuck at "setup is starting".I have already disabled all other boot options except USB. There is no floppy drive option.I have gone through more or less every post related to this problem , but the common solution that is to remove all the USB, Firewire etc. attachments. It does not work in my case as I am installing from USB.
I just received my new ASUS HD7850-DC-2GD5 video card. I installed it, booted up Windows, and installed the drivers from the included CD. Then I rebooted Windows. However, my system hangs at the 'Starting Windows' screen. Actually, it seems that only the video hangs--because if I type in my password and hit enter, as if I could see the welcome screen, I hear the 'correct' sound that normally plays when I log in. I just can't *see* what's going on.
I reset the system and booted into safe mode, where I entered Device Manager and uninstalled the HD7850 display adapter. Then I rebooted Windows, and again I'm able to operate normally -- but without the AMD Radeon drivers. I've tried downloading the latest drivers from the AMD website, but installing those leads to the same problem. I get stuck at the 'Starting Windows' screen.
This has me totally perplexed... I bought an ASUS-branded card specifically to try and avoid drama, as I also have an ASUS mobo (the P8Z68-VPRO/GEN3). My CPU is an i7 2700k, not currently overclocked at all. My PSU is an XFX PRO850W XXX Edition Semi-Modular 88Plus 850 Watt PSU, which should be up to the task, right?
I have a gateway desktop with the windows 7 it is stuck on Saying setup is starting services, I do not have my origional windows 7 setup disk.What do I need to do to get my computer up and running again.
I refuse to believe my 500g Sata Hard drive that has over 400gs of file and information, is all now magically a paper weight. No Physical damage has happened to the Drive at all. This is the Issue:Originally Half of the Drive was Encrypted with True Crypt and the other Half was the System Drive((C drive 50g)) and a "general" Drive/ ((175gigs)). The Problem started when some odd way it seems My Encrypted drive become corrupted to the point it would no longer easily mount. It would take 4~5Min's to mount as opposed to the normal 4~5 seconds.What happens when it did mount, The Drive was not working correctly. I couldn't access my files on that drive at all. Not only that, While it seemed like it did Mount the True Crypt Drive, my entire CPU became Non responsive. I couldn't do anything. I was unable to click on anything on the desktop, bring up task manager or even ctrl+alt+del to log off or anything. It was like it was frozen but I was only able to move the mouse...I waited a while((15~20Min's)) and went to restart the CPU by holding the power button.
Now When ever I try to load or boot from that Hard drive...Nothing Happens....It hangs at the "starting Windows" screen. I have windows 7-64bit ultimate. I tried to load from the Win 7 disk, and it hangs at a blank Screen. When I tried to use the repair feature of the Win Xp service pack 2((Remember windows XP *_*??))It hangs at analyzing the Hard drive "47850 asapii at 0 at 0 something something"..When I try to use the advance options of the Windows 7 boot, Safe mode of all types hangs at lading the drivers, Last Known good Configuration hangs at starting windows. Its Like part of the HDD doesn't want to load for anything in the world . And When I have mentioned Hangs I mean it sits there for 1~2 hours and nothing has changed.
I have ideas in my head But I don't even Know if they are possible. Oh Oh..at when I try to Load the HDD by having a back up 40g hard drive be the main booter it STILL hangs at the starting windows screen. I know its sometimes suggested to try it HDD in another CPU but if its not the main Boot Drive is that the same thing? Really don't have any Mobos that have Sata Slots for me to try that out on.I'm praying a simple chkdsk would Solve everything But there's no way I can Issue that Command. My Question(s) are:s there a Way to force the CPU to do a chkdsk command pre boot?Is there a way to have the HDD disabled at start up and enable it during the back up drives desktop((Via check for hardware changes or the "Manage" feature by right clicking computer from the start menu
Here is a summary of my problem: 1) My computer recently got stuck on the "Starting Windows Screen." So I manually held the power button to reboot. 2) On reboot, it said there was a need to run a startup repair, which I did. Everything checked fine, except for the last one which said "System Volume on Disk is Corrupted," which it claimed to have successfully fixed. 3) After rebooting from repair, the system gets stuck on "Starting Windows Screen" for a good 10-15 minutes, after which it runs a registry check. After it completes that I get hopeful -- but the screen then gets stuck on an all black screen with just the mouse cursor and nothing more. 4) Additional note: Attempting to start the computer on "safe mode" leads safe mode startup to become stalled on "DRIVERSCLASSPNP.SYS" 5) The lastest attempt to repair yielded this message: "Startup repair cannot repair this computer automatically.
Problem event Name: Startup Repair Offline Problem signature 01: 6.1.7600.16385 02: 6.1.7600.16385 03: uknown 04: 21201099 05: AutoFailover 06: 2 07: Corrupt Volume OS Version: 6.1.7600.2.0.0.256.1 Locale Id: 1033
I turned on my computer and i got a black screen saying "windows error recovery" I clicked on "start windows normally" and the logo starts to load. Then a black screen comes up saying "setup is starting services" and a pop-up titled "Install Windows" reads: The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install windows, click "ok" restart computer and then restart the installation. I press ok, and the computer restarts normally but then it stays stuck at the setup is starting services screen, with the Install windows pop-up.
