Stuck On Starting Windows - Repair Shows System Volume On Disk Corrupted
Oct 19, 2011
I have had Win 7 installed for a while now).
Here is a summary of my problem:
1) My computer recently got stuck on the "Starting Windows Screen." So I manually held the power button to reboot.
2) On reboot, it said there was a need to run a startup repair, which I did. Everything checked fine, except for the last one which said "System Volume on Disk is Corrupted," which it claimed to have successfully fixed.
3) After rebooting from repair, the system gets stuck on "Starting Windows Screen" for a good 10-15 minutes, after which it runs a registry check. After it completes that I get hopeful -- but the screen then gets stuck on an all black screen with just the mouse cursor and nothing more.
4) Additional note: Attempting to start the computer on "safe mode" leads safe mode startup to become stalled on "DRIVERSCLASSPNP.SYS"
5) The lastest attempt to repair yielded this message: "Startup repair cannot repair this computer automatically.
Problem event Name: Startup Repair Offline
Problem signature 01: 6.1.7600.16385
02: 6.1.7600.16385
03: uknown
04: 21201099
05: AutoFailover
06: 2
07: Corrupt Volume
OS Version: 6.1.7600.2.0.0.256.1
Locale Id: 1033
I bought a new laptop yesterday and today decided to create a system repair disk. I inserted a blank DVD RW and started the process the progress bar went to about 60-70% (estimate, does not give actual progress %) in half an hour and has now been at that exact same point for the last 5 hours. I have had no errors and the window still says "creating disk..." and it still sounds as though the DVD drive is still writing onto the dvd. I Wouldn't think it would take this long to create especially with no progress.
I have had the generic.win virus on my computer for a while now due to my anti virus program not being able to remove it. It has been causing internet browsing issues specifically with google and other search engines. However I believe that the virus has corrupted my "Windows repair tool" that is required to reformat my system. I start my computer and hold F8 to bring up the menu and select the repair computer option and it brings me to the menu where I can either "start windows normally" or run system repair tool.
When I try to run the system repair tool I know it is supposed to bring me to a menu to select language and what not and ultimately restore my computer. Unfortunately it just returns to the normal boot up and repair option over and over upon selecting the option. I just want a virus free computer. My system is a dell inspirion running 64 bit windows 7. I have backed up all the files.
My computer was installing the latest updates for windows 7 professional 64 bit and the battery died during the shut down process, and now when I start the computer it will allow me to log in but when it hits the desktop it freezes up completely. I have tried using the system restore but somehow my restore points cant be found anywhere and when I tried using the system repair option on the installation cd it says it cant because the problem is unfixable. The error it says it has is in the boot sector and it says the error code is 0x45d, but when I ran it a second time it didn't say that. I really don't want to deal with pulling off all of my personal files and then installing a fresh copy of windows because that would be too much of a hassle, but if i have to i will.
It started when I needed to take the computer back to factory default with a fresh install. It was going back to Acer to have the charger point fixed (charger socket had become loose but still charged when it was held in). I used the control panel interface to reinstall windows, all was going well until the laptop power died, I restarted the laptop and the screen displayed:
"Setup is starting Services" a pop up box then appeared with "The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click "OK" to restart the computer and then restart installation."
I have searched around the net and found a few guides but most require a repair disc or Installation disk. I have neither. Is there any way of starting the install again? For example from Command Prompt?
Created it with no problems, apparently at least. My BIOS is set to boot from CD drive, so why won't my machine boot from the system repair disk? There were no errors when disk was created. My machine just boots to windows.
Anyone else experience this with Win 7 Professional?
yesterday I was enjoying a match of league of legends on my computer and it completely froze up on me. I had no option but to give it the hard shutoff, so I held down the power button. Upon starting my computer back up, I was brought into system repair. It tried to repair and then said it could not be repaired, and so I restarted it. It then said it went into repairing once again and said it may take up to an hour. A minute later it said the errors were fixed, and restarted the system for me. It then continued to do that and has been doing that every time I restart it.I tried logging in to safe mode but it just brought me into system repair.I tried to restore to an earlier point but the restore failed.I tried using a Windows 7 Reinstall disk and had odd results. The first time it said a file was missing during the expanding files. The Second time it got to completing install and then said the disk was missing files to complete and to contact the disk manufacturer. I'm currently running it one more time to see if I can get it to work.All I have plugged in is the mouse, the keyboard, and the monitor.
I own a Samsung QX410 and while I was browsing the Internet it crashed and would not start normally without crashing. So I've tried running Repair my system, even Repair my computer from my windows disk. But every time I do that it comes to a blue splash screen (with the bird, leaf, etc.) and it would not do anything. No options would come up and it would just sit there.
i recently bought a new hard drive to put my os on, and i stupidly changed my old hard drive type from basic to dymainic, and its not letting me reformat it or convert it back to basic. When i try it says "Windows cannot format the system volume on this disk."
I got a new computer on friday and have set it up today. I installed my windows 7 home premium 64bit and it downloaded,i then went on to put in my xfx AMD graphics card software disk and the download stopped half way through so i started it again and it got right to the last step where it has to re-start the computer. When it started up again insted of loading windows homepage it loaded the system repair screen, it searched and searched but said it had found no problem, so i clicked on the recovery tool restart option that then re-started the computer and the process started again and went straight back onto the system repair screen again. Is there anything i can do to stop it?
Last night I closed my laptop without shutting it down. I woke up this morning and turned it on and it went to the system repair screen and ran through that. It says there are problems but they are not automatically repairable. I then tried to do the system restore to an earlier point in time and had one option for a couple days ago. I ran through that but it says there is an error and when I expand to see the error one of the things listed is no OS installed. I have windows 7 64bit. Why it would say I don't have an OS installed but it is running through the system start up repair as well as listing a date that I could restore it back to. I have not tried installing the hard drive into a new computer yet.
getting a USB mouse or keyboard to work while using a Windows 7 system repair disk. My USB mouse seems to mostly be the problem. The keyboard works most of the time, so why doesn't the USB mouse work
I have a toshiba with a windows 7 64bit, and it's been acting really slow recently and freezing up on me so I thought there might be viruses that I needed to get rid of, so I restarted my computer so I could go in safe mode with networking to check if there really were. When I restarted my computer I momentarily forgot to press the f8 key and the windows starting screen with the logo showed up. Without thinking I turned off my computer since I didn't want to restart again (it took forever for the computer to do). Once I turned the laptop on again I ended up going to system repair. For some reason this did nothing to my computer. I left it on for hours and hours until I finally decided I wasn't going to get any results. I once again restarted the laptop but this time when I went to system repair I cancelled it and when into more options and tried doing a system restore which also didn't work and said a bunch of my files couldn't be read. When I looked back at the system repair log it said "system volume on disk is corrupt." I googled it trying to find something to help me, and every place said to run sfc scan, which I did on command prompt, which always gave me the reply "there's a system repair pending which requires reboot to complete" and since my computer can't reboot properly no matter what this is what it'll say. Is there some way to run this scan or another way to fix my computer without having to lose all my data? I have some really important files on here. I've also tried running chkdsk /r /f in command prompt which it wouldn't let me do and said it can't lock the current drive because the type of file sytem is NTFS.
the tip to run SFC -- I'm not sure where the 'command prompt' is now in Windows 7.
What I did was search for sfc, right click, then run as administrator.
It appears something is running, but no window opened to ask or tell me anything. I checked Task Mgr and Resource Monitor and can't find anything resembling SFC, but there is activity even tho' I'm not doing anything else. The hard drive light is also flickering about once per second. What should I expect? Do I just wait patiently? How can I confirm SFC is running and fixing any errors?
I'm writing about my brother's Samsung R780 laptop (running Windows 7 64 bit), which recently stopped working. When he starts the computer, he gets the following error: "Windows Error Recovery." Searching around online led us to create a system repair disk on my laptop (which also runs Windows 7). When we boot with the disk in the drive, a prompt asking for our language (which is greyed out so we can't change it) and our keyboard (which we can change) appears. Without changing the keyboard option, we press 'next' and then it freezes. We've also tried the 'repair your computer' option in the Advanced Boot Options, but it also freezes.
I did a search in the Windows 7 forum for system repair disc and got no hits so here I am asking.I have only Windows 7 32-bit installed here so I don't have a 64-bit system with which to create a system repair disk. I do have a Windows 7 Ultimate setup disk. How can I make a Windows 7 64-bit repair disk?
When I was booting one day last week I got a nasty BSOD when Windows was trying to load. Then on the next reboot Windows 7 said it couldn't load and needed to do the recovery OS option from the Windows 7 repair on the CD. Well, before trying that I did a cold reboot and it got back into the OS fine so I didn't think much of it. Now, I noticed Ghost shows the C: drive status as "Unavailable" and it can't back it up anymore. It does give me an option to restore from one of my old backups. I'm thinking the MBR got hosed up somehow or something like that. But I'm skeptical to run an MBR repair since I have that 100MB partition on my SSD where my OS resides.
Ghost Shot> This was about a week ago my Windows 7 started acting up right before the big patch Tuesday. I've been running it for over a year now and it's been solid. When I first set it up I installed it on my SSD (Intel 510 120GB) drive. One of the qualms I had with the install is Windows created a separate boot sector on the disk drive where it stored my boot files. This is known the the "system reserved" operating system files 100MB partition. Apparently the way to avoid this is to use a third party partition tool before doing the windows install. That way it will keep the Boot sector files on the same partition which is how I would of liked it for doing restores from Ghost 15,etc. Anyway, ghost was backing up my system C: drive before last week. I have yet to even try and use Ghost to see if it would successfully restore my OS but I've been using it to backup my C: drive anyways. Prior to last week it could backup my C: drive fine. I might try a Ghost restore point from a few weeks back before this happened but not sure yet[CODE]
I'm trying to created a posready 7 embedded image, and I want to be able to supply a system repair disc and system image with it, should the disk hardware fail for the end user.
The procedure seemed straightforward, and I'm running it straight after a fresh posready install to test it. I have 2 USB DVD drives attached, one to write the image to, and one because it needs the installation media as part of the creation process. from control panel, backup and restore, click Create a System Repair Disc Choose the dvd writer to use to create the disc and insert a blank disc, I choose E: in my case which has a blank DVD-R "Insert Windows Installation Disc", OK I put the Posready7 install DVD in the other DVD drive F: , click continue... System Repair Disc could not be created, The system could not find the path specified (0x8070003) I have tried inserting instead a Windows 7 Professional DVD at step 3, have tried with a single DVD writer, swapping discs, have tried on a couple of different posready7 installs, one with the 100MB system reserved partition and one without.
I've googled the error code and got lots of results suggesting corrupt user profiles etc, but these are new installs.
I am running Windows 7 RC on my Samsung NC10 netbook. I would like to create a system restore disk to allow me to restire system images, etc. However being a netbook the NC10 doesn't have a CD/DVD drive and while I can use an external one, it would be much easier to have the repair disk on a Flash Pen Drive.
Can anyone help me to create a repair disk on my pen drive?
I created a backup and image (Win 7 Pro) on an external (USB attached) HDD and then created a Windows 7 System Repair Disk. I then booted from the repair disk and the attached external drive is not visible.
The external drive is attached via through a hub, does it need to be attached directly? Is their a generic USB Mass Storage Device driver that I can load?
I was hoping that by creating the repair disk that all necessary drivers would have been loaded to the disk, but apparently not.
My laptop is 6 months old - sony vaio. Do I require to create System Repair Disc? I have taken back up in external hard drive. Also have created windows 7 backup in three separate DVDs.
I have never had the need t use this disk till now but as I am getting problems starting up I tried System Restore and it didn't work (I have tried 2 restore points).Can I use the repair disk that I created on my HP desktop to mend the system or to restore it to an earlier time ? When I open the repair disk on the computer it just shows a couple of folders (boot ,sources as well as a file called bootmgr but I can't see a hrep file to let me know what I can do...
I made a few months back a backup of my machine(windows 7 64bit edition). The size was like 25gb's so I saved it on my external hard-drive(I bought a case and put a hard drive(Seagate I think) in it). I know want to use this to restore my computer. So I made a system repair disk and loaded it up. However it cannot find my external hard-drive. I have "WindowsImageBackup " in my root directory of my external drive. Yet it still does not see it. I would install some drivers but I have no clue what drives I need as when I plug it into my computer and I am in windows 7 it finds my drive. What do I need to make window 7 recognize my image?
in my hardisk with G: size 465gb xp shows that 74.86 gb is remaining space......while space used is 0 , there are no hidden files, nothing in the disk K: size 186gb same as above and remaining is 35 gb according to windows xp i: size 196gb .in this only 9 gb is used and xp shows that 10gb is remaining//
i remember, last week everything was ok and all of sudden this problem has occurred. all other drives are ok only these three are way over their own heads.
my system is
Intel Core i5-2300 cpu@2.8ghz 2.79ghz,3.48 GB of RAM and windows is 32 bit/
