Using The Repair Disk When System Restore Doesn't Work
Jan 1, 2013
I have never had the need t use this disk till now but as I am getting problems starting up I tried System Restore and it didn't work (I have tried 2 restore points).Can I use the repair disk that I created on my HP desktop to mend the system or to restore it to an earlier time ? When I open the repair disk on the computer it just shows a couple of folders (boot ,sources as well as a file called bootmgr but I can't see a hrep file to let me know what I can do...
View 1 Replies
ADVERTISEMENT
Mar 8, 2012
I am having the following system configuration
XPS L401X Base
Genuine Windows(R) 7 Home Premium 64bit (English)
Intel(R) Core(TM) i7-740QM Processor
6GB 1333MHz DDR3 SDRAM (1 x 2GB + 1 x 4GB)
640GB 7200RPM Hard Drive
Lately whenever i try to start my computer it pass the Dell Bios and then directly goes to the screen which states
Repair your system or Start windows normally When i chose repair system , it start downloading windows files and then launch the windows , but hung up at the sky blue login window with only movable cusor . When i choose to start windows normally it gives me BSOD momentarly ( hard to see the message) and then restarts again . i tried with the advanced boot up options like
repair my computer , all safe modes , restore to last good configuration but it does the same and hangs at windows loging sky blue window .I Tried to run the Dell PSA+ Diagnostic and it returns with 2000-0146 error . As per the Dell online solutions for this type of error ,I tried to reinstall the Hard disk but the problem still exist.
View 3 Replies
View Related
Dec 7, 2012
all the icons on my screen have gone white and i cant click anything not even the start button. when i bring up the task manager all it is is a white box. i can login in fine but that is it. when i try torestore nothing happens, i dont have any restore points so i dont want to do a complete restore if i can avoid it. i have tried running chkdsk in safe mode but nothing has worked. i have also run avg rescue cd form a usb and it identified a trojan but i deleted it, still no effect. i have also tried using the recovery cd i got with my samsung laptop but can only use the startup check tool. this comes back with no issues but i cant use any of the other options.
View 2 Replies
View Related
Aug 9, 2012
I'm running Windows 7 Home Premium 64bit. When I try to do a System Restore, it seems to run to completion, reboots the system and then issues the following message:
"System Restore did not complete successfully. Your computer's system files and settings were not changed."
Same result in Safe mode. Same result with AV disabled. (Kaspersky Internet Security 12)
View 6 Replies
View Related
Jan 1, 2013
I have recently installed windows ultimate x64 on my computer.i have an asus p6t deluxe v2 mobo, i7-960 cpu and a wd velociraptor hdd. The install went ok, I even managed to restart my computer a few times after but after windows updates installed it won't boot. I tried to boot into safe mode, restore from the installer, and repair, none worked. After startup repair it says: "a patch is preventing the system from starting" and I get a 0x1f error code.(Preventing windows from downloading any updates didn't work either)
View 9 Replies
View Related
Jan 12, 2013
My laptop crashed the other day after a Windows update. To make a long story short it would not boot up. I tried several things to no avail. System restore disc did not work. At this point I thought the hard drive was fried. Finally I stuck the the Windows 7 companion disk and got the system to boot I can tell all my files are there somewhere due to amount of memory taking up on the hard drive. Anyways my main problem it is now asking for the product key although I have 29 days which unfortunately I cannot find. Laptop in question is a Lenovo G550. Where do I go from here? Do I have to purchase a new key? I've been using the laptop since and it seems to be working properly as far as i can tell.
View 5 Replies
View Related
Apr 16, 2012
I ran norton power eraser (had a virus) and it id'd a number of bad things so I said fix it and now windows wont start up. comp says to run startup repair but that doesnt work and I dont know what to do from here
View 3 Replies
View Related
Nov 4, 2009
Created it with no problems, apparently at least. My BIOS is set to boot from CD drive, so why won't my machine boot from the system repair disk? There were no errors when disk was created. My machine just boots to windows.
Anyone else experience this with Win 7 Professional?
View 9 Replies
View Related
Aug 31, 2012
my Windows 7 64-bit computer acted oddly (after it accidentally got unplugged while on, tho not sure that's what did it). now when i boot i get as far as the windows 7 logo starts to show, then i get that it can't boot.
i changed nothing that i know of. repair says it can't. restore, which only lists points from 3 days ago, doesn't work. i did a memory test. it was fine. am i doomed to do a clean re-install of Windows 7?
btw, if i get that Windows 7 logo, and also a stage where it says it is loading files, that means it is reading from my hard drive, right?
View 5 Replies
View Related
Aug 31, 2012
my Windows 7 64-bit computer acted oddly (after it accidentally got unplugged while on, tho not sure that's what did it). now when i boot i get as far as the windows 7 logo starts to show, then i get that it can't boot. i changed nothing that i know of.
repair from my bootable Windows 7 disk says it can't. restore, which only lists points from 3 days ago, doesn't work. i did a memory test. it was fine.
am i doomed to do a clean re-install of Windows 7?
btw, if i get that Windows 7 logo, and also a stage where it says it is loading files, that means it is reading from my hard drive, right?
View 1 Replies
View Related
Jan 22, 2011
Windows won't start. I get a a black screen saying some hardware or software has changed and the only options are to press enter to continue, or escape to exit. I tried booting my Win 7 64 bit recovery disc (aka system repair disc) but in the second screen where it tells you to select an operating system, it is blank! I attempted to add hard disk drivers but i couldn't figure out how. So i pressed next and got to the screen with various options. I selected "Startup Repair" but that won't work. It says that "startup repair cannot repair this computer automatically".
View 5 Replies
View Related
Sep 21, 2012
I've had an ongoing war with my PC for four days now. I have Windows 7 and it refuses to start up. Originally I tried starting up normal, it gave me two choices: system repair or start as normal. If I chose normal it would show the windows logo then reset. If I chose repair it would turn black for several minutes, then go to a blue screen for several minutes and wouldn't move past that. So i tried to boot from CD. I have the option of installing windows or repair. I chose repair, once again it goes to the blue screen and nothing happens (and I've left it on this blue screen a good 15 min mind you.) Finally I submitted and decided to just re-install windows. it goes to the starting setup... and sits there indefinably.
View 5 Replies
View Related
Nov 5, 2011
I think I must have lost Windows Installer using Revo uUninstaller and messed up the registry somehow. I'm a bit afraid to use the Win 7 repair disk 32 bit I created; I might mess things up further. I've tried to download a 32 bit installer update to no avail; it says it's not compatible with my version of Windows (Professional, SP1). Anyhow, does the Win 7 repair disk have a fix for the lost Win 7 installer? If so, I might give it a try if you can provide some guidance in doing so. I have everything backed up in Carbonite, Seagate external drive, Acronis True Image, memory sticks, etc.
View 3 Replies
View Related
Feb 15, 2013
Living is south FL can be a bitch when the rains come as there often is a ton of accompanying lightening that plays havoc with the electrical system, even though I have surge protectors inside and outside the house. We just had some very heavy rains with lightening and my computer shut down several times, but I could restart it each time...except for the last time when Windows wouldn't startup. At that point, Start Up Repair came into play. Although I routinely backup on an external drive, of course I never did it this month-DUH!Results from SUR were error free (error code=0x0) on all the parameters tested, however there were the following error codes reported:"Unspecified change to the system configuration might have caused the problem." Failed: 0x1fRepair Action: System FilesFailed: x490There were more options to select for a recovery task, but I didn't try them as they didn't seem to be as salient as the two above.
View 6 Replies
View Related
Aug 25, 2011
My Windows 7 System Restore doesn't restore. It allows me to set them and tells me they've been done. But on the couple of occasions when I've wanted to use one, no joy. Yes I know I could possibly do it in 'Safe Mode' but that isn't an answer as to why I can't do it in regular mode?
View 2 Replies
View Related
Aug 17, 2012
I am running windows 7. when i try and restore to a different time it fails.Whats up? Yes it is turned on with lots of disc space.
View 3 Replies
View Related
Nov 20, 2012
I have a few friends that would like me to fix some virus/malware issues. Most are Win 7 users(a few running XP), but don't have any of their installation media or driver disks or anything. I've had a few personal instances where I used Norton or a similar program to scan for viruses before, and when it did so it removed some of the boot files, or some other system critical file. I don't want that to happen here, cause I don't want to give them back useless machines.
Can I just create a "Repair Disk(DVD)" in Windows? Will that take care of an issue like the one I described above? Should I use an external to create images of each, one at a time, run the scans and then use the image if anything goes wrong? And if something does go wrong, how would I restore from the image? I've never done that before, and I'm eager to learn.
View 3 Replies
View Related
Jan 2, 2013
Today I booted up my computer and got a screen saying something went seriously wrong with my computer and that I should repair it from an installation disk. I load up windows onto a USB, boot it and click the repair option. It's been about half an hour and nothing has shown up. Is it still loading or perhaps something is very wrong with my PC?
View 2 Replies
View Related
May 9, 2011
Win 7 no boot to windows or safe mode Startup cannot repair or System Restore Drive has changed fron C to D, PC was showing black screen 2 options Start windows normally or Launch Start up repair 1 beepthen launches startup repair.checkingsystem, then cannot repair and send info about this problem.
View 5 Replies
View Related
May 8, 2011
The other day I was trying to figure out what coral paintshop pro meant by security key, so I googled it. Something popped up and asked me if I wanted to download, and I wanted to say no, but my laptop's mouse is too sensitive at times, so I accidentally clicked yes. My computer automatically shut down right after that. Every time I turn it on now, it goes straight into System Repair and it doesn't work, it says it cannot repair. I've tried System Restore, but since that doesn't get rid of the documents that have been downloaded, it isn't helping either. My computer won't even let me enter any form of Safe Mode, it just goes straight back to System Repair.
View 3 Replies
View Related
Dec 28, 2011
I am trying to restore my computer because it launches into system recovery. After I get to the recovery options I tried to do system restore but it tells me there isn't enough space on the disk.
View 6 Replies
View Related
Jun 19, 2012
I have a Dell XPS Studio MT 435 with a two HDD RAID0 system. It has three partitions:
1) C: System,
2) D: Recovery
3) Unnnamed.
It shipped with Vista Home and I upgrade to Win 7 Home. HDD1 was causing errors...the RAID0 was dying. I was getting many BSODs.I bought Acronis True Image Home 2012.I was NOT able to clone the entire disk as an image because of the BSODs.I was able to backup (sector by sector) the C: and D: partitions. I did not backup the unnamed partition.I was also able to have Win 7 backup save off the C: partition.I then replaced to the two hard drives (WD 640 GB) with two new hard drives (Seagate Momentus XT 750 GB) and reestablished the RAID0 with these new drives.First I used the Win 7 recovery CD and its backup to restore the C: partition. The restore was successful but it wouldn't boot. There was no MBR. Windows didn't ask about nor put a MBR back on the system.Next I used Acronis recovery CD and its backup to restore the C: partition.It did ask about a MBR, which I said to do. The restore was successful and when complete, it booted up to the Win 7 login.I logged in and checked things out.Everything seemed fine, my stuff was back. Until I tried Windows Update.If failed saying that the service isn't running.I checked, the server was running so its a false error report.
I found Fix It for Windows Update and it did stuff but no good. Windows Update still fails.I then got a clue that it won't run unless Windows thinks the software is genuine. So I ran the MS validation site. It reported that I was missing files and to fix that I needed to install Windows from a genuine DVD. Which I have.I ran the installer (in custom mode, it wouldn't install in express mode as the DVD was older version). The installation almost completed and I get a dialog box saying the Win 7 was not compatible with my hardware.I don't know what to try next. Of course I have compatable hardware, it was running on the old drives and running on the new drives with a broken Windows Update.I feel that I'm so close to being fully back up and I don't want to give in and start from scratch by install Windows on a wiped disk and then loading all the programs and data file one by one back onto the system.
View 1 Replies
View Related
Sep 24, 2012
How can I get the Windows 7 Control Panel Backup & Restore link to work? When I click on it it does nothing
View 3 Replies
View Related
Dec 15, 2012
I can't perform a factory restore on my C670 laptop. Every option I've looked up fails and goes back to a blank black screen.
View 1 Replies
View Related
Aug 6, 2012
I was being an idiot and messed with Msconfig memory. Restarted and gave me bsod. After that I ran Startup repair system restore failed.I checked the memory box I think it was 0, not sure. if you need additional information let me know.
-What I did Messed with memory in Msconfig
-What I have access to in Startup Repair Cmd
-What I tried System restore Startup Repair
View 1 Replies
View Related
Jan 15, 2012
I recently downloaded a damaged file, which caused my computer (not this one) to be unable to start up normally. The computer now boots up in Startup repair, which is unable to repair my computer "automatically" and when I then click "View advanced options for system recovery and support" and go to the "System restore" tab and choose a Date and time for the restoration, it tells me that "There is not enough free space to restore the disk". I seem to have no options to try and sort out the missing space on the harddisk, which should be unnecessary because I am pretty sure there is still alot of disk space on the C.
View 1 Replies
View Related
Feb 16, 2012
i got a hp pavillion running windows 7 i was installing the windows update and pressed restart now, after this the force restart thing came up but i pressed cancel and it didnt like this, after 2 minutes of program errors it restarted and went straight into startup repair. running it on normal mode doesnt work and safe mode is not available. when it runs startip repair it wont fix anything and tells me to restore, i can get to the windows restore part and have restore points but they do not work and an error is shown, x8000xffff if i remember correctly.
View 2 Replies
View Related
Jan 26, 2012
Last night I closed my laptop without shutting it down. I woke up this morning and turned it on and it went to the system repair screen and ran through that. It says there are problems but they are not automatically repairable. I then tried to do the system restore to an earlier point in time and had one option for a couple days ago. I ran through that but it says there is an error and when I expand to see the error one of the things listed is no OS installed. I have windows 7 64bit. Why it would say I don't have an OS installed but it is running through the system start up repair as well as listing a date that I could restore it back to. I have not tried installing the hard drive into a new computer yet.
View 9 Replies
View Related
Mar 17, 2011
HP G72; Pentium P6100 @ 2.00 GHz; 300 GB HDD; 6 GB RAM; Windows 7 Home Premium 64-bit. Three months old. Had a problem with the network connection and tried to run System Restore first thing. It said it didn't complete successfully. Tried a different restore point. Still didn't complete successfully. Isn't that a bad thing? What could have made a new computer lose its System Restore capability? Is there something I can do about it? Have since resolved the network problem so that isn't an issue anymore. However, I'd like to know System Restore is there for me in case something bad happens.
View 4 Replies
View Related
Aug 17, 2009
I tried upgrading a Home Premium Installation with a Professional Technet Disk and found that it deferred to an Any Time Upgrade that had to be purchased separately (with an Anytime Upgrade Key). Has anyone found a way to upgrade with a Full Version Disk?
View 4 Replies
View Related
Oct 2, 2012
Using preinstalled Win 7 Home Premium 64bit on an HP 6813w Pavilion. The original hard drive, a Hitachi HDS721010CLA332 1Tb crashed.1) System Recovery discs was made along with a System Recovery with System Image disc.2) A more current System Image was made on an external hard drive.The Hitachi was replaced with the same model. Checked bios to make sure it was installed correctly.Under System Recovery, Image Restore, Select a System Image Backup there is nothing in the table to choose from as far as a source (disc drive or external drive).A) System Recovery (3 discs) has the HP preinstall file folder on the 3rd disc but is not read by the System Recovery program.B) Under System Restore, Image Restore, Advanced, it asks for a network or driver to be installed. That opens up the directory of C: which is the external hard drive. Under WindowsImageBackup the computer name is identified followed by three entries:[CODE]It seems to me the Recovery and System Restore discs are not functional. Am not a technical person but I have taken this as far as I know how at this point.Printed out all the instructions from HP and Microsoft to follow step by step but the failed discs will not allow me to move forward.
View 2 Replies
View Related
