Restore & Repair Don't Work?
Aug 31, 2012
my Windows 7 64-bit computer acted oddly (after it accidentally got unplugged while on, tho not sure that's what did it). now when i boot i get as far as the windows 7 logo starts to show, then i get that it can't boot.
i changed nothing that i know of. repair says it can't. restore, which only lists points from 3 days ago, doesn't work. i did a memory test. it was fine. am i doomed to do a clean re-install of Windows 7?
btw, if i get that Windows 7 logo, and also a stage where it says it is loading files, that means it is reading from my hard drive, right?
View 5 Replies
ADVERTISEMENT
Aug 31, 2012
my Windows 7 64-bit computer acted oddly (after it accidentally got unplugged while on, tho not sure that's what did it). now when i boot i get as far as the windows 7 logo starts to show, then i get that it can't boot. i changed nothing that i know of.
repair from my bootable Windows 7 disk says it can't. restore, which only lists points from 3 days ago, doesn't work. i did a memory test. it was fine.
am i doomed to do a clean re-install of Windows 7?
btw, if i get that Windows 7 logo, and also a stage where it says it is loading files, that means it is reading from my hard drive, right?
View 1 Replies
View Related
Jan 1, 2013
I have never had the need t use this disk till now but as I am getting problems starting up I tried System Restore and it didn't work (I have tried 2 restore points).Can I use the repair disk that I created on my HP desktop to mend the system or to restore it to an earlier time ? When I open the repair disk on the computer it just shows a couple of folders (boot ,sources as well as a file called bootmgr but I can't see a hrep file to let me know what I can do...
View 1 Replies
View Related
Jan 1, 2013
I have recently installed windows ultimate x64 on my computer.i have an asus p6t deluxe v2 mobo, i7-960 cpu and a wd velociraptor hdd. The install went ok, I even managed to restart my computer a few times after but after windows updates installed it won't boot. I tried to boot into safe mode, restore from the installer, and repair, none worked. After startup repair it says: "a patch is preventing the system from starting" and I get a 0x1f error code.(Preventing windows from downloading any updates didn't work either)
View 9 Replies
View Related
Mar 8, 2012
I am having the following system configuration
XPS L401X Base
Genuine Windows(R) 7 Home Premium 64bit (English)
Intel(R) Core(TM) i7-740QM Processor
6GB 1333MHz DDR3 SDRAM (1 x 2GB + 1 x 4GB)
640GB 7200RPM Hard Drive
Lately whenever i try to start my computer it pass the Dell Bios and then directly goes to the screen which states
Repair your system or Start windows normally When i chose repair system , it start downloading windows files and then launch the windows , but hung up at the sky blue login window with only movable cusor . When i choose to start windows normally it gives me BSOD momentarly ( hard to see the message) and then restarts again . i tried with the advanced boot up options like
repair my computer , all safe modes , restore to last good configuration but it does the same and hangs at windows loging sky blue window .I Tried to run the Dell PSA+ Diagnostic and it returns with 2000-0146 error . As per the Dell online solutions for this type of error ,I tried to reinstall the Hard disk but the problem still exist.
View 3 Replies
View Related
May 9, 2011
Win 7 no boot to windows or safe mode Startup cannot repair or System Restore Drive has changed fron C to D, PC was showing black screen 2 options Start windows normally or Launch Start up repair 1 beepthen launches startup repair.checkingsystem, then cannot repair and send info about this problem.
View 5 Replies
View Related
Dec 15, 2012
Started laptop (Lenovo) opened fine, but no connectivity to internet. Desk top PC close by, has internet.Tried to RestoreLaptop did not, shut down after 30 minutes. Tried System Repair, did nothing for 45 minutes. Shut down, restarted, did not open.
View 1 Replies
View Related
Sep 28, 2012
Problem: This morning I had a brief 1 second power outage while I was using my computer which forced it to shutdown. It just stood there shutting down for about 15 minutes when i decided to click force shutdown. After restarting, computer ran checkdisk and startuip repair because windows was not loading.
Issues; I ran chkdsk a couple times, lots of bad sectors./index files repairing recovering, but it ends up hanging at stage 4 at a certain spot. I left it running at that spot for over 5 hours and just stood there(I went to sleep and woke up at same spot). I booted with windows 7 cd and tried startup repair, the first 3 times it said it couldnt repair. It only showed 2 restore points available and both gave error messages saying they couldnt load. I ran a checkdsk /r again and was fixing a lot of stuff and hung at same spot again. Tried another startup repair, this time it said it worked but still the same problem, windows isnt loading. However, I am able to get to the login screen now after waiting about 10 minutes at the windows logo however my kieyboard/mouse functionaility seems to be gone so i cant even type my password to login at that point. I ran a diagnostic in the boot menu, when checking the harddrive it gave me an error. Ive tried booting to every option available, safe mode, safe mode with networking, safe mode with command prompt etc, nothing works. It brings me to logon screen after a long time but keyboard./mouse dont work at that point. Now, like i said i dont want to reformat my computer and lose all my files. My keyboard/mouse work with the windows 7 bootup cd doing those menus but not when it gets to logon screen booting the normal way. I was thinking of buying an external drive and installing windows on there and booting from there but im not sure if my computer would recognize it since it wont recognize my keyboard and mouse at login screen.
View 4 Replies
View Related
Nov 5, 2011
I think I must have lost Windows Installer using Revo uUninstaller and messed up the registry somehow. I'm a bit afraid to use the Win 7 repair disk 32 bit I created; I might mess things up further. I've tried to download a 32 bit installer update to no avail; it says it's not compatible with my version of Windows (Professional, SP1). Anyhow, does the Win 7 repair disk have a fix for the lost Win 7 installer? If so, I might give it a try if you can provide some guidance in doing so. I have everything backed up in Carbonite, Seagate external drive, Acronis True Image, memory sticks, etc.
View 3 Replies
View Related
Feb 11, 2013
I've had prolonged problems with my computer; blue screen crashes around 5-10 times a day, everyday for past 2 years. Anyway my problem today is that finally it will not start up. I get the start repair (recommend) or start windows normally. The latter of the two just fails and restart the computer. When clicking repair it say it cannot repair automatically, I have also gone into advanced boot settings and tried safe mode which also failed and restarted the computer the same goes with trying last good configuration which also does the same. I have also tried repair disc and back up disc I have but I don't if it some I'm doing wrong but they are not loading.
View 33 Replies
View Related
Aug 6, 2012
I was being an idiot and messed with Msconfig memory. Restarted and gave me bsod. After that I ran Startup repair system restore failed.I checked the memory box I think it was 0, not sure. if you need additional information let me know.
-What I did Messed with memory in Msconfig
-What I have access to in Startup Repair Cmd
-What I tried System restore Startup Repair
View 1 Replies
View Related
Jan 15, 2012
I recently downloaded a damaged file, which caused my computer (not this one) to be unable to start up normally. The computer now boots up in Startup repair, which is unable to repair my computer "automatically" and when I then click "View advanced options for system recovery and support" and go to the "System restore" tab and choose a Date and time for the restoration, it tells me that "There is not enough free space to restore the disk". I seem to have no options to try and sort out the missing space on the harddisk, which should be unnecessary because I am pretty sure there is still alot of disk space on the C.
View 1 Replies
View Related
Feb 16, 2012
i got a hp pavillion running windows 7 i was installing the windows update and pressed restart now, after this the force restart thing came up but i pressed cancel and it didnt like this, after 2 minutes of program errors it restarted and went straight into startup repair. running it on normal mode doesnt work and safe mode is not available. when it runs startip repair it wont fix anything and tells me to restore, i can get to the windows restore part and have restore points but they do not work and an error is shown, x8000xffff if i remember correctly.
View 2 Replies
View Related
Mar 23, 2012
My wife was fiddling on Facebook and her PC crashed. It boots to a repair message, but fails each time with an error about a corrupt registry. I have tried all the "F8" options, but it keeps going to the same repair screen, which fails each time.It has two HDDs, so I am busy (DOS) copying files from the C: drive to the D: drive, but I would rather repair than reinstall.
View 10 Replies
View Related
Jan 26, 2012
Last night I closed my laptop without shutting it down. I woke up this morning and turned it on and it went to the system repair screen and ran through that. It says there are problems but they are not automatically repairable. I then tried to do the system restore to an earlier point in time and had one option for a couple days ago. I ran through that but it says there is an error and when I expand to see the error one of the things listed is no OS installed. I have windows 7 64bit. Why it would say I don't have an OS installed but it is running through the system start up repair as well as listing a date that I could restore it back to. I have not tried installing the hard drive into a new computer yet.
View 9 Replies
View Related
Nov 20, 2012
I have a few friends that would like me to fix some virus/malware issues. Most are Win 7 users(a few running XP), but don't have any of their installation media or driver disks or anything. I've had a few personal instances where I used Norton or a similar program to scan for viruses before, and when it did so it removed some of the boot files, or some other system critical file. I don't want that to happen here, cause I don't want to give them back useless machines.
Can I just create a "Repair Disk(DVD)" in Windows? Will that take care of an issue like the one I described above? Should I use an external to create images of each, one at a time, run the scans and then use the image if anything goes wrong? And if something does go wrong, how would I restore from the image? I've never done that before, and I'm eager to learn.
View 3 Replies
View Related
Apr 16, 2012
I ran norton power eraser (had a virus) and it id'd a number of bad things so I said fix it and now windows wont start up. comp says to run startup repair but that doesnt work and I dont know what to do from here
View 3 Replies
View Related
Oct 21, 2012
My Sony vaio just turned off last week and wont boot up. It turns on an flashes Sony vaio but that's all. I made a recovery disk and I can get into bios so I tried booting from internal disk and tried startup repair got nothing, tried system restore for every restore point and none will finish. Took each piece of ram out an tried starting it up to see if bad ram was the problem and it starts the same way. I also tried the restore from previous image but I have no image. So I don't know what else to try. Windows 7
View 15 Replies
View Related
Jan 4, 2013
A few days ago, I went to turn on my computer and it just gave me a black screen after the "Starting Windows" screen. I attempted to use System Repair, which failed. It said there was an unspecified error possibly caused by a change in system configuration. I have not changed anything on my computer, for the record, between the last time it worked and now. My husband said it downloaded updates, which would explain why it was off in the first place instead of just being on stand-by. Anyway, I then tried System Restore, which also failed. I can get it to start in Safe Mode with Networking, but it seems that everything I try to run to figure out what the problem is, is saying it can't find the problem. I enabled bootlogging and found this...
Did not load driver @nettun.inf,%isatap.displayname%;Microsoft ISATAP Adapter
Did not load driver @nettun.inf,%isatap.displayname%;Microsoft ISATAP Adapter
Did not load driver @nettun.inf,%teredo.displayname%;Microsoft Teredo Tunneling Adapter
Did not load driver @hal.inf,%acpi_amd64.devicedesc%;ACPI x64-based PC
Did not load driver @battery.inf,%*compbatt.devicedesc%;Microsoft Composite Battery
Did not load driver @netavpna.inf,%mp-agilevpn-dispname%;WAN Miniport (IKEv2)
[code]....
View 3 Replies
View Related
Dec 17, 2010
my laptop starts up as the "windows did not shut down properly" screen where I can start windows normal to do repair. When I start windows normally it sends me to the repair screen. And when I select system repair it just freezes at a light blue and geen screen and the only thing showing is my cursor. Ive tried to run the system in safe mode but it freezes at classpnp.sys, and eventually sends me back to the repair screen that is frozen. I don't believe I have my windows 7 installation disk for my laptop so that is out of the equation.
My brother was using my computer and said it was updating when this happened so Im not sure what caused all this.
View 9 Replies
View Related
Mar 9, 2012
The other day i found some ram and decided to try and see if it worked in my Dell desktop computer, when i turned it on it said i couldnt mix different types so i took it out and turned it off, i diddnt even go on it.Today i turned it on and it got to the windows 7 logo and it restarted and said windows failed to start, launch startup repair or start normally. I clicked startup repair but it woulnt work, i tried restoring to an earlier date but that wouldnt work either. I tried safe mode but when it gets to loading it restarts and just goes round in circles.
View 6 Replies
View Related
Feb 13, 2011
So I was using a program called TuneUp Utilities, and I used this function called the Disk Doctor to check for errors in my computer.While it was checking for errors, my computer shut down automatically and when I started it up again a black screen appears giving me the option to either load Startup Repair or Start Windows Normally. When I start Windows Normally, everything goes fine until I see the cursor. Nothing happens and then the computer restarts on it's own. I've even tried disabling restart on system failure but when I did that the computer just stayed at a dark screen until I restarted it.When I load Startup Repair, it searches for problems for like 5 minutes and then says it can't be automatically fixed. It says to remove all USB cables and everything (which I did but had no effect) and lets me have advanced recovery options.When I load advanced recovery options, all that appears is Startup Repair again.When I press F8 and do a Safe Mode, it starts up normally but once I see the mouse cursor the computer restarts.
View 5 Replies
View Related
May 27, 2012
Today, my HP pavilion dv7 laptop thats running on Windows 7 64 bit will not start. It was acting a little slow and then it completely froze and shut down. When i turned it on again it when to the starting windows screen and the windows logo never came and it went right into a startup repair.
View 6 Replies
View Related
Jan 22, 2011
Windows won't start. I get a a black screen saying some hardware or software has changed and the only options are to press enter to continue, or escape to exit. I tried booting my Win 7 64 bit recovery disc (aka system repair disc) but in the second screen where it tells you to select an operating system, it is blank! I attempted to add hard disk drivers but i couldn't figure out how. So i pressed next and got to the screen with various options. I selected "Startup Repair" but that won't work. It says that "startup repair cannot repair this computer automatically".
View 5 Replies
View Related
Sep 21, 2012
I've had an ongoing war with my PC for four days now. I have Windows 7 and it refuses to start up. Originally I tried starting up normal, it gave me two choices: system repair or start as normal. If I chose normal it would show the windows logo then reset. If I chose repair it would turn black for several minutes, then go to a blue screen for several minutes and wouldn't move past that. So i tried to boot from CD. I have the option of installing windows or repair. I chose repair, once again it goes to the blue screen and nothing happens (and I've left it on this blue screen a good 15 min mind you.) Finally I submitted and decided to just re-install windows. it goes to the starting setup... and sits there indefinably.
View 5 Replies
View Related
Jul 28, 2011
I can't get system restore to work all the way.I keep getting error messages. The first error message said this:"System Restore did not complete successfully. Your computer's system files and settings were not changed.System Restore failed while mounting the registry from the restore point. An unspecified error occurred during System Restore. (0x800703f1)".A different error message was saying that Restore didn't work because it failed to extract this file: C:Program Files (x86)AdobeAdobe Premiere Elements 7.0x0407.ini So, I booted into safe mode and I deleted every single Adobe Premiere Elements file on my pc. Then I tried to do system restore again, this time from safe mode - but restore still didn't work. I keep getting the same error message. I have tried all the other restore points, with no success.Also, if this info helps - last week I installed a new internal 2TB Hard Drive onto my computer - it's the "K:" drive. A few days later I was getting ready to create a regular Restore Point, like I do every few weeks. But that's when I noticed that "System Restore" now shows two drives "C:" and "K:", and "K:" was greyed-out. So, I clicked the "Configure" button to configure the "K:" drive.
So, I wasn't sure that if the act of configuring the "K:" drive might have caused this whole - not being able to Restore issue. For example, by adding a new hard drive and then "Configuring" the drive, so that System Restore can work/talk with the new drive - did that somehow give System Restore a split-personality disorder? [code]
View 14 Replies
View Related
Dec 7, 2012
all the icons on my screen have gone white and i cant click anything not even the start button. when i bring up the task manager all it is is a white box. i can login in fine but that is it. when i try torestore nothing happens, i dont have any restore points so i dont want to do a complete restore if i can avoid it. i have tried running chkdsk in safe mode but nothing has worked. i have also run avg rescue cd form a usb and it identified a trojan but i deleted it, still no effect. i have also tried using the recovery cd i got with my samsung laptop but can only use the startup check tool. this comes back with no issues but i cant use any of the other options.
View 2 Replies
View Related
Jul 2, 2009
When I can afford it, I'm getting another gateway with Windows 7.
I have a gateway laptop m-6881 w/ vista 32bit HP sp2. (8/2008)
I also have a gateway tower S500 XP Pro 32bit SP3 ( 3/2003)
The laptop has 3 restore DVD's with the OS on it (sp1) - also other programs and drivers.
The tower has 4 restore CD's with the OS on it - including 2driver cd's, 2programs cd's.
Can I use the restore CD from the XP or/and vista machine on my Windows 7 machine as a dual boot as long as I wipe the HDD of the XP machine and toss it? ( since all are gateways )
I no longer want to use my XP,win2000 or win98 rigs anymore.
I'm going to wipe the HDD and give them away.
This may not make sense but I can't get my fingers to type what I'm trying to say
{Dell laptop win98 and a Dell win2000 tower - I don't even boot them up anymore}
View 9 Replies
View Related
Apr 18, 2011
I have a Compaq Laptop It run on Windows Vista Home Premium 32bit. It is having this problem that the wireless internet won't connect, I have done system restore so many times and every time it still won't work, sometime it will.
View 3 Replies
View Related
Aug 17, 2012
I am running windows 7. when i try and restore to a different time it fails.Whats up? Yes it is turned on with lots of disc space.
View 3 Replies
View Related
Apr 20, 2011
I have just installed a 3TB external drive for backup purposes and was testing the image restore feature. If I use the external drive on the usb 3.0 port when entering F8/System Repair/Repair from image, the drive is not detected at all, when I plug it into the 2.0 port it is detected. Within windows itself the drive operates fine on the 3.0 hub. I am guessing its some kind of USB 3.0 driver issue within system repair but wondered if there is a work around. Not sure I want to sit and wait for a restore over 2.0 when it could be using 3.0!
View 9 Replies
View Related
