System Repair And Safe Mode Won't Work
Dec 17, 2010
my laptop starts up as the "windows did not shut down properly" screen where I can start windows normal to do repair. When I start windows normally it sends me to the repair screen. And when I select system repair it just freezes at a light blue and geen screen and the only thing showing is my cursor. Ive tried to run the system in safe mode but it freezes at classpnp.sys, and eventually sends me back to the repair screen that is frozen. I don't believe I have my windows 7 installation disk for my laptop so that is out of the equation.
My brother was using my computer and said it was updating when this happened so Im not sure what caused all this.
View 9 Replies
ADVERTISEMENT
Mar 9, 2012
The other day i found some ram and decided to try and see if it worked in my Dell desktop computer, when i turned it on it said i couldnt mix different types so i took it out and turned it off, i diddnt even go on it.Today i turned it on and it got to the windows 7 logo and it restarted and said windows failed to start, launch startup repair or start normally. I clicked startup repair but it woulnt work, i tried restoring to an earlier date but that wouldnt work either. I tried safe mode but when it gets to loading it restarts and just goes round in circles.
View 6 Replies
View Related
Mar 8, 2012
I am having the following system configuration
XPS L401X Base
Genuine Windows(R) 7 Home Premium 64bit (English)
Intel(R) Core(TM) i7-740QM Processor
6GB 1333MHz DDR3 SDRAM (1 x 2GB + 1 x 4GB)
640GB 7200RPM Hard Drive
Lately whenever i try to start my computer it pass the Dell Bios and then directly goes to the screen which states
Repair your system or Start windows normally When i chose repair system , it start downloading windows files and then launch the windows , but hung up at the sky blue login window with only movable cusor . When i choose to start windows normally it gives me BSOD momentarly ( hard to see the message) and then restarts again . i tried with the advanced boot up options like
repair my computer , all safe modes , restore to last good configuration but it does the same and hangs at windows loging sky blue window .I Tried to run the Dell PSA+ Diagnostic and it returns with 2000-0146 error . As per the Dell online solutions for this type of error ,I tried to reinstall the Hard disk but the problem still exist.
View 3 Replies
View Related
Jan 1, 2013
I have recently installed windows ultimate x64 on my computer.i have an asus p6t deluxe v2 mobo, i7-960 cpu and a wd velociraptor hdd. The install went ok, I even managed to restart my computer a few times after but after windows updates installed it won't boot. I tried to boot into safe mode, restore from the installer, and repair, none worked. After startup repair it says: "a patch is preventing the system from starting" and I get a 0x1f error code.(Preventing windows from downloading any updates didn't work either)
View 9 Replies
View Related
Feb 13, 2011
So I was using a program called TuneUp Utilities, and I used this function called the Disk Doctor to check for errors in my computer.While it was checking for errors, my computer shut down automatically and when I started it up again a black screen appears giving me the option to either load Startup Repair or Start Windows Normally. When I start Windows Normally, everything goes fine until I see the cursor. Nothing happens and then the computer restarts on it's own. I've even tried disabling restart on system failure but when I did that the computer just stayed at a dark screen until I restarted it.When I load Startup Repair, it searches for problems for like 5 minutes and then says it can't be automatically fixed. It says to remove all USB cables and everything (which I did but had no effect) and lets me have advanced recovery options.When I load advanced recovery options, all that appears is Startup Repair again.When I press F8 and do a Safe Mode, it starts up normally but once I see the mouse cursor the computer restarts.
View 5 Replies
View Related
Jul 17, 2012
i just crashed som1 64 bit lennovo laptop while i opperate a 32 bit pc dont have any windows system with me,it wont start on safe mode,and system repair has failed many times.the laptop was running on low battry and it shut itself,when i tryed to reboot it,it automaticly went to system repair which failed
View 2 Replies
View Related
Dec 2, 2012
when I go to safe mode and hit repair computer they say I have to use a dvd and hit repair. my dvd does not have repair on it I have trouble with startup I do not know how to use the dvd if it has no repair listed
View 9 Replies
View Related
Nov 25, 2012
i recently ran into a problem with starting up my computer. I have the blue screen of death. I've tried safe mode. It won't work. I would click safe mode it would load and then go back to the blue screen. I have a lenovo laptop and I'm not trying to pay 150-200 for it!
View 3 Replies
View Related
Mar 10, 2012
every time i turn on my computer, I first get a message from AMI - "SATA 1:S.M.A.R.T. Status BAD". When I press F1 to continue, it progresses normally, until recently when i got "windows is loading files" then "startup repair" instead. Startup Repair searches, then finds a hard disk problem which it cant fix, and I can choose to reboot or try "advanced options"I've already tried safe mode, same thing happens.I've looked around, still not sure how to proceed - what caused this and can it be fixed without replacing my hardware?
View 2 Replies
View Related
Jan 24, 2012
Have an Advent laptop here, BSODing when booting with the error message above.Cannot run in safe mode and any start up repair attempts have failed.I have run disk checks both in the Windows start up tool and in Linux and they both say no problems but when I try a system restore it says there is one. Here is the .dmp file and the laptops specs.I also ran sfc /scannow but everytime I do I get a message saying there is a repari waiting for me to restart the laptop and that's all I ever get.[code]
View 9 Replies
View Related
Dec 7, 2012
Earlier today I tripped over a headphone cord and it flung my computer off my desk. I have an HP omni PC. It's the kind that had the computer and the monitor built together. I picked it back up off the floor. The power cord came out on impact. I set everything back up and was relived to hear it turn on. I selected start windows normally (win 7 64 bit) and it sat at starting windows forever. I eventually manually shutdown the computer. I powered back on and I got an option to start windows normally or use startup repair.
I thought it would be a good idea to go into startup repair. It just sat at the light blue screen with the large white mouse sitting there. Nothing happened. Nothing appeared on screen. I turned off the computer again and am just leaving it there for now. I am worried that the hard drive may have been disconnected from the fall and that's why windows won't start. Or maybe the hard drive was damaged. I tried doing a safe mode boot but it redirected me to startup repair.
View 17 Replies
View Related
May 28, 2011
I recently got a virus 2 days ago. It disable my possibilities from accessing any program or internet. I made a mistake by downloading a windows something ware to boot up security. It then crash...so I went to task manager didnt work, which i then went to search and entered msconfig. I then chose safe mode in minimal services. It then says loading files. U see a black screen with thite letters of the files being loaded. Then u see ur mouse cursor, and then it boots up again and same process. So I tried launch startup repair, it launches a repair, but it says it startup cannot repair this computer automactically. I then result into going to tapping f8..it goes to the screen of advanced options. Problem is if i try safe mode it will crash. I dont have a backup, and i dont want to lose my movies of over 700 gigs.
View 5 Replies
View Related
Apr 27, 2012
prob 1; defrag wont work in safe mode ( my a v and defender does )the laptop now takes 8-15 mins to (FULL) shut down EVEN IN SAFE MODE..laptop 14 months old, not heavily used. had mobo and battry already warrented 10 months in ...
View 9 Replies
View Related
Nov 10, 2012
my mouse will only work in safe mode.
View 1 Replies
View Related
Nov 10, 2012
my mouse will only work in safe mode.how to fix this?
View 2 Replies
View Related
Jul 8, 2012
When Windows looks like it is starting, the "Windows is loading files..." message comes up. It then goes into Startup Repair, which either can't detect problem or "Startup Repair cannot repair this computer automatically". I have tried pressing F8 for the safe mode menu, but none of the options there work either as selecting any of them just ends up in Startup Repair again. Sadly I have no system restore point or system image to reload. I have run the Windows Memory Diagnostic, which found no problems. I know that reloading Windows is almost certain to fix this problem, but I have a handful of files that I really, really don't want to lose by doing this. Is there any way that I can save my files?
View 3 Replies
View Related
Dec 20, 2011
I have a virus and trying to get my laptop to work in safe mode, to fix it. But my Laptop monitor is broken so I use an external monitor but now I can't get that to work.
View 4 Replies
View Related
Feb 13, 2013
One day i was on my computer and it crashed and since then every time i try and open up my computer normally it will reach the point where my user has to log in and cut out just before. Can still hear windows just my screen says "no connection with pc". Ive tried other wires/monitors and stuff and nothings worked.I have a Nvidia graphics card and ive tried completely removing my nvida files and reinstalling the drivers from the website. When i uninstalled the graphics driver it allowed me back onto windows normally except when i reinstalled the driver (on the normal version of windows not saftey) after the restart it went back to the same problems.
View 15 Replies
View Related
Nov 18, 2012
I have an acer aspire laptop. Last night firefox stopped responding and from that message the whole thing, completely froze. Tried safe mode networking and it worked, but normal mode would not work at all. Tried a few hours later and restarted it then froze again once restarted in normal mode and hasn't worked since... yet safe mode works fine. Can anybody help? Please! The only way I could shut it down was to take the battery out. I turned it on, entered my password and when it loaded froze immediatley. I tried again, again the only way of shutting down was to take the battery out, and when turned on I was greeted by a black screen and nothing else. [code]
View 3 Replies
View Related
Aug 23, 2011
really have never seen anything quite like this. When I boot up my PC and it gets to the desktop, a program window pops up and the mouse and keyboard will not work.Therefore, I cannot clear the program from the desktop or go anywhere to run scans or the like to see if the problem is virus related. When I go into safe mode, it does the same thing. I tried restoring to last known configuration with no System Restore shows no restore points. I can't do anything including get you information on my PC. I am running Windows 7 32 bit on a HP/Compaq DC 7600 C/PD 950. I am running Avast Anti-Virus Suite Pro. Regardless once on the desktop, I can not go anywhere. What the heck? Right now I am working on my laptop.
View 6 Replies
View Related
Jun 5, 2012
My computer runs like grease lightning in safe mode, and my internet speeds are marvellous also, but alas when not in safe mode I have on quite a few occasions lately had my Windows freeze, my Windows Live Mail also freeze. I will define freeze, everything just does not work, my browser Firefox/Google, none of my loaded programs.
I have to leave the computer for about 10 minutes, and then it is perfect all day!, so I am guessing a program is causing the dilemma, but which one? I have about 60 applications running and I haven't loaded a new one in about 6 months. Is there a program I can purchase/download that would seek out the rogue program if indeed it is a rogue program.
View 9 Replies
View Related
Jan 13, 2013
I'm currently using a windows 7 computer and am having trouble accessing system restore. As I start up the computer normally, I make it past the login screen to the main screen, and it freezes after a few seconds each time. Going on safe mode instead, I went to system restore only to find that is was turned off as well my network connections
View 2 Replies
View Related
Oct 15, 2012
I am attemptin to make a backup image of my hard drive. The new Image will be complied on an external hard. The drive has a 1TB Capacity with 450 Gigs free. I am receiving an error code during the image compilation stating that there is a problem with the I/O device. I ran chkdsk and found no problems. I also switched USB ports just to rule that out. I have used this same external hard drive to image a different laptop with no issues last week. My next approach would be to try this in safe mode. When I am in safe mode, I cannot find the location of the software which windows uses to create the image. I typed the location into the address bar and it pulled up a link in the address bar which took me back to the control panel. Can anyone tell me if this is possible to do in safe mode and if not, what my next step would be. Windows error: The Operation failed due to a device error encountered with either the source or destination. If the source or destination volume is on a disk, run CHKDSK/R on the source or destination volume and then retry the operation. (0x8078012D) Additional Information: The request could not be performed because of an I/O device error (0x8007045D)?
View 2 Replies
View Related
Jul 23, 2012
My system is stuck in a boot loop while booting in safe mode,I was updating the drivers on my video card. I used driver cleaner pro to remove my old drivers. I then used msconfig to boot in safe mode with the minimal option selected. When the computer reboots I get to the screen to type in my password for 5 seconds an the computer reboots itself.
View 5 Replies
View Related
Sep 21, 2012
After a power outage, my windows 7 will not boot without going into safe mode.How can I restore my system to boot automatically without going into safe mode.
View 1 Replies
View Related
Apr 13, 2011
I ran the disk cleanup and it freed up several GB of space on my C drive (I have a Dell laptop with a C drive with about 62 GB of space and a D drive with 426 GB.I let it run overnight because it said it was going to take 6 hours (no idea how long it actually took).
It had either shut down or hibernated, so I turned it back on the next morning. Windows booted up, but has not been working--I can't use the shortcuts, and even if I click on something from the start menu it won't run. (Firefox, for example, or other programs). It gives me an error message about the data not being found with an I/O error.I am able to use the internet and some programs in Safe Mode, which is what I'm doing now.I can't use my audio system in Safe Mode.I have the upgrade CD for Windows 7--they sent it after I had bought the computer. Do I need to reinstall Windows 7?Can I do it from the update CD?Do I need to back up all of my files (photos, etc) before I reinstall it?
View 1 Replies
View Related
Oct 26, 2012
I ran a complete system recovery and now start up freezes. Seems mouse etc work perfectly fine in safe mode.
View 3 Replies
View Related
Jan 1, 2013
I have never had the need t use this disk till now but as I am getting problems starting up I tried System Restore and it didn't work (I have tried 2 restore points).Can I use the repair disk that I created on my HP desktop to mend the system or to restore it to an earlier time ? When I open the repair disk on the computer it just shows a couple of folders (boot ,sources as well as a file called bootmgr but I can't see a hrep file to let me know what I can do...
View 1 Replies
View Related
Jun 3, 2012
After attempting to start my Laptop in Safe Mode, it loaded drivers normally only to crash a few seconds later. A prompt message appears but is impossible to read because Windows immediately reboots upon showing the prompt.
View 1 Replies
View Related
Oct 27, 2011
I am familiar with System Restore, selecting earlier times, and the often-available option of undoing a System Restore. But I found out (too late) that according to Microsoft, System Restore done in Safe Mode is not able to be undone.I lost 1,000's of photos doing the system restore, now the only restore point option visible is what I believe to be the new one after I did the restore. Prior to me doing the System Restore, there were a number of times from me to choose from, I just chose one that was 10 days ago. Is there any software, method, or hack that I can use or do to recover the thousands of photos that were on my desktop and that were in folders on my desktop? It's a 1 TB HD?
View 1 Replies
View Related
Feb 14, 2013
On this recent windows update, 2/14/13, my computer froze on the "Preparing to configure windows" screen for several hours. I rebooted normally and the screen went to "configuring updates" and stuck at 67% for about an hour. I got frustrated with it and rebooted to safe mode to see if I could do a system restore and when I did it said there was no restore point back up! So I rebooted normally and now it is still just sitting on the "Preparing to Configure Windows" screen with the circle spinning. I am using Windows 7 Ultimate on a Dell Dimension 2400.
View 1 Replies
View Related