When Windows looks like it is starting, the "Windows is loading files..." message comes up. It then goes into Startup Repair, which either can't detect problem or "Startup Repair cannot repair this computer automatically". I have tried pressing F8 for the safe mode menu, but none of the options there work either as selecting any of them just ends up in Startup Repair again. Sadly I have no system restore point or system image to reload. I have run the Windows Memory Diagnostic, which found no problems. I know that reloading Windows is almost certain to fix this problem, but I have a handful of files that I really, really don't want to lose by doing this. Is there any way that I can save my files?
i recently ran into a problem with starting up my computer. I have the blue screen of death. I've tried safe mode. It won't work. I would click safe mode it would load and then go back to the blue screen. I have a lenovo laptop and I'm not trying to pay 150-200 for it!
My computer runs like grease lightning in safe mode, and my internet speeds are marvellous also, but alas when not in safe mode I have on quite a few occasions lately had my Windows freeze, my Windows Live Mail also freeze. I will define freeze, everything just does not work, my browser Firefox/Google, none of my loaded programs.
I have to leave the computer for about 10 minutes, and then it is perfect all day!, so I am guessing a program is causing the dilemma, but which one? I have about 60 applications running and I haven't loaded a new one in about 6 months. Is there a program I can purchase/download that would seek out the rogue program if indeed it is a rogue program.
I have recently installed windows ultimate x64 on my computer.i have an asus p6t deluxe v2 mobo, i7-960 cpu and a wd velociraptor hdd. The install went ok, I even managed to restart my computer a few times after but after windows updates installed it won't boot. I tried to boot into safe mode, restore from the installer, and repair, none worked. After startup repair it says: "a patch is preventing the system from starting" and I get a 0x1f error code.(Preventing windows from downloading any updates didn't work either)
prob 1; defrag wont work in safe mode ( my a v and defender does )the laptop now takes 8-15 mins to (FULL) shut down EVEN IN SAFE MODE..laptop 14 months old, not heavily used. had mobo and battry already warrented 10 months in ...
this has been occurring ever since my computer was diagnosed with a trojan. i removed it, and ever since then no .EXE files will open. I will click on any .EXE file, the revolving circle signifying loading will show for a second, and then it won't load at all - the program is not present in the task manager. the weird thing is, there is no difference in safe mode. no .EXE file will run in any variation of safe mode. this prevents me from running ANYTHING apart from the command prompt, viewing folders, and notepad. i cannot load the internet, a virus scanner, NOTHING. it is difficult to fix something when one is literally unable to access anything. i have attempted the 'repair my computer' option when i press f8, but it says it can't be repaired automatically. i downloaded a registry fix from a different computer, but it reads the message "Could not import exefix.reg: Not all data was successfully written to the registry. Some keys are open by the system or other processes". I cannot load a registry fix, virus scanner, or the internet. i STILL cannot open .EXE files in any variation of safe mode. i do not have the windows 7 disc so i cannot reformat. additionally, the trojan appears to have erased all my system restore points, so i cannot restore to any previous time.
my laptop starts up as the "windows did not shut down properly" screen where I can start windows normal to do repair. When I start windows normally it sends me to the repair screen. And when I select system repair it just freezes at a light blue and geen screen and the only thing showing is my cursor. Ive tried to run the system in safe mode but it freezes at classpnp.sys, and eventually sends me back to the repair screen that is frozen. I don't believe I have my windows 7 installation disk for my laptop so that is out of the equation.
My brother was using my computer and said it was updating when this happened so Im not sure what caused all this.
I have a virus and trying to get my laptop to work in safe mode, to fix it. But my Laptop monitor is broken so I use an external monitor but now I can't get that to work.
One day i was on my computer and it crashed and since then every time i try and open up my computer normally it will reach the point where my user has to log in and cut out just before. Can still hear windows just my screen says "no connection with pc". Ive tried other wires/monitors and stuff and nothings worked.I have a Nvidia graphics card and ive tried completely removing my nvida files and reinstalling the drivers from the website. When i uninstalled the graphics driver it allowed me back onto windows normally except when i reinstalled the driver (on the normal version of windows not saftey) after the restart it went back to the same problems.
The other day i found some ram and decided to try and see if it worked in my Dell desktop computer, when i turned it on it said i couldnt mix different types so i took it out and turned it off, i diddnt even go on it.Today i turned it on and it got to the windows 7 logo and it restarted and said windows failed to start, launch startup repair or start normally. I clicked startup repair but it woulnt work, i tried restoring to an earlier date but that wouldnt work either. I tried safe mode but when it gets to loading it restarts and just goes round in circles.
I have an acer aspire laptop. Last night firefox stopped responding and from that message the whole thing, completely froze. Tried safe mode networking and it worked, but normal mode would not work at all. Tried a few hours later and restarted it then froze again once restarted in normal mode and hasn't worked since... yet safe mode works fine. Can anybody help? Please! The only way I could shut it down was to take the battery out. I turned it on, entered my password and when it loaded froze immediatley. I tried again, again the only way of shutting down was to take the battery out, and when turned on I was greeted by a black screen and nothing else. [code]
So I was using a program called TuneUp Utilities, and I used this function called the Disk Doctor to check for errors in my computer.While it was checking for errors, my computer shut down automatically and when I started it up again a black screen appears giving me the option to either load Startup Repair or Start Windows Normally. When I start Windows Normally, everything goes fine until I see the cursor. Nothing happens and then the computer restarts on it's own. I've even tried disabling restart on system failure but when I did that the computer just stayed at a dark screen until I restarted it.When I load Startup Repair, it searches for problems for like 5 minutes and then says it can't be automatically fixed. It says to remove all USB cables and everything (which I did but had no effect) and lets me have advanced recovery options.When I load advanced recovery options, all that appears is Startup Repair again.When I press F8 and do a Safe Mode, it starts up normally but once I see the mouse cursor the computer restarts.
really have never seen anything quite like this. When I boot up my PC and it gets to the desktop, a program window pops up and the mouse and keyboard will not work.Therefore, I cannot clear the program from the desktop or go anywhere to run scans or the like to see if the problem is virus related. When I go into safe mode, it does the same thing. I tried restoring to last known configuration with no System Restore shows no restore points. I can't do anything including get you information on my PC. I am running Windows 7 32 bit on a HP/Compaq DC 7600 C/PD 950. I am running Avast Anti-Virus Suite Pro. Regardless once on the desktop, I can not go anywhere. What the heck? Right now I am working on my laptop.
After attempting to start my Laptop in Safe Mode, it loaded drivers normally only to crash a few seconds later. A prompt message appears but is impossible to read because Windows immediately reboots upon showing the prompt.
XPS L401X Base Genuine Windows(R) 7 Home Premium 64bit (English) Intel(R) Core(TM) i7-740QM Processor 6GB 1333MHz DDR3 SDRAM (1 x 2GB + 1 x 4GB) 640GB 7200RPM Hard Drive
Lately whenever i try to start my computer it pass the Dell Bios and then directly goes to the screen which states Repair your system or Start windows normally When i chose repair system , it start downloading windows files and then launch the windows , but hung up at the sky blue login window with only movable cusor . When i choose to start windows normally it gives me BSOD momentarly ( hard to see the message) and then restarts again . i tried with the advanced boot up options like repair my computer , all safe modes , restore to last good configuration but it does the same and hangs at windows loging sky blue window .I Tried to run the Dell PSA+ Diagnostic and it returns with 2000-0146 error . As per the Dell online solutions for this type of error ,I tried to reinstall the Hard disk but the problem still exist.
the computer I am concerned with is running Windows 7 with IE8, Microsoft Security Essentials and Malwarebytes Anti-Malware. I am currently in Safe Mode with Networking without issue.The owner of the computer says that something happened earlier today while he was online that sounds like some false antivirus popup, but he's unsure. Here are the symptoms in normal mode. Every application, from moving through them to opening and closing them, runs exceptionally slow - one to three minutes to open, at least a minute to open internet pages. I noticed that, when in IE, as the pages are loading the IE page disappears and reappears. I am not very familiar with Windows 7 so I don't know if it is related. The computer seems to be getting slower as the day goes on. CPU usage is very high.So far, I have disabled many startup items that were unnecessary. I ran CCleaner and cleaned up. MBAM was run in both normal and safe mode, full scans, and found nothing. This is also posted in Viruses and Malware, but I'm unsure where it should live.
window 7 working on safe mode and unable to choose the another restoration point and it is not loading in normal mode -after installed third party software worked on that for few hours, then after switched off and later it switched on then after this problem started, automatic repair done, nothing is notified
I am using acer laptop,intel Pentium processor,windows7 professional os,my problem is windows is not starting normally and is running safe-mode.when entering normal mode it is displaying "welcome" after entering password "Please wait",it takes a long time to starting window and i'm waiting more than 24 hours but its not starting window normally...but it starting safe mode.
Windows 7 x64 does not boot into Safe Mode or Safe Mode with command prompt. Normal mode boots perfectly. Are there any suggestions on how to resolve this? I've tried startup repair and attempted fix boot, etc. No affect. The unit is free of infection. I also tried using SFC, but it said everything was fine.
I have a Laptop HP pavilion Dv4 my graphics card is AMD M880G with ATI Mobility Radeon HD 4200, my processor is AMD Turion(tm) II dual core mobile M500. The thing is i was playing Tropico 4 and i paused it then it began to mix pixels i couldn't see nothing, then i restarted and this is what happens:I cant see nothing, all is mixed up. on safe mode runs well.I played driver san francisco, fallout new vegas before and any of this happened.
i bought my hp pavilion dv6 laptop in 2010 and the warranty went out on 2011, i turn on my laptop and i only get the quick web. Every time i try to start window it tells me it cant. i can not even get on safe mode. it asks me to repair my computer but every time i click on that i get a blank blue screen (baby blue color). i have tried to go on safe mode it wont let me, i tried to go on safe mode command prompt and it still wont let me,
I own an HP G-62-347 Notebook, Windows 7 64 bit, Microsoft Security Essentials, Windows Firewall, no other real time AV, no other Firewalls, Windows Defender disabled as Microsoft instrucs for MSE, 3 GB Raam, 313 GB HDD, AMD Dual Core P-380 processor.My Laptop began freezing 8-10 minutes after bootup logon. No matter what I was doing, Media, Excell, Word, it would freeze up and hang. Sometimes CTL_ALT_DLT would unfreeze it, even before the task manager appeared, but it will take 3-4 minutes with an o[ague screen and the progress "circle" moving then unfreeze, sork 1-2 minutes, freeze, etc. Then all clicks on something to activate would result in loooong (long) delays, 15 to 45 seconds, then the new screen or window or peogram would open, sometimes frozen up.This did not happen in safe mode.I have (on suggestions) removed all things from my start up or programs that other's have suggested, Google Update files, and three or four others that others had issues with that I found on the net. I have also removed programs that I had installed around then.
I have also run, in Safe Mode, MSE, MS Safety Scanner, MS malicious file remover, ESET online Scanner, my laptop is clean.I have used mscong to disable all non-microsoft items to see if that helped. It did not. Same issues.I have used startup repair, and after scanning received a message that there was a problem, but that it could not fix it, did I want to send a report to Microsoft, I checked yes and it sent me to System Restore, ran it for about a week ago which was when I had downloaded some software, and the problem still existed, which sent me back to System Repair, ran it, same error message, reported again.I used a Repair Disk to get back on the laptop a coulple of times when needed, but ultimately, the problem surfaced still.I have used ReImage Plus to rebuild all my defective Windows Files and a lot of my 3rd party defective files. And, I also did a Win 7 repair install.I am pretty convinced something is being loaded somewhere, but can't find where or who or what.Am I on the right track? Have I missed something? Am I wrong? I do not really want to do a clean re-install of Windows 7, for if I do I am reformatting everything to clean any and everything.... sort of NUKE it... but would rather find the culprit (for education purposes). And, I dislike installing and updating and setting up everything again more than I hate "boiled okra!"Anyone and Everyone that has had to do with this or similar sounding issue, please reply. I have two weeks invested, and would like to "graduate" resolving this and getting the learning experience of WHY?
I have been getting BSOD errors whenever booting into regular mode. Safe mode is fine (I have tweaked the registry so I have sound in safe mode) My system specs are in my profile, but used Winaudit for full specs. The winaudit report in formatted text is too big for an attachment. I have 2 attachments to this post, including zipped up minidumps. Could my registry tweak for sound have something to do with this? Perfmon /report was run, but it says:
An error occured while attempting to generate the report. The system cannot find the path specified.
My laptop hangs up/ freeze in normal mode. Now I can only open it on safe mode. I was only copy pasting some files couple days ago when it happened. I have to hold the power button to turn it off. I already tried system restore and reformatted it twice. I'm using HP Pavilion dm4-1160us, windows 7 64-bit.
I can't boot my computer in normal mode or safe mode. When I try to do so, after the "starting windows" page the only things that come up are my mouse, a black screen/background, and a "logonui.exe-bad image- Authui.dll isn't designed to run on windows" error/message (not the exact message). I can't use a system restore (it can't find a restore point), the image recovery tool finds no image to restore from, system repair either doesn't find a problem or can't fix the problem, and basically nothing else works (none of the advanced boot options or other various buttons and tools do anything noticeable). I've even tried to use sfc in command prompt, but whenever I do any sfc things at all (/scannow, verifyonly, verifyfile, etc.) it says there is a system repair pending that requires a reboot. I've restarted 7-8 times and the exact same message keeps coming up. I'm looking for any general help I can get right now, [I can post my computer specifics in an hour when I have time](posted a few). I have an HP pavilion dv6-6135dx wiht Windows 7 x64.Processor: AMD a8-3500m APU, raedon graphics bios vender/version: insyde, f. 20.I'm having trouble getting more info because my computer is still crashing occasionally and I don't really know what else is relevant; if you need more, I might need directions on how to get it. Especially if it involves command prompt.I should also add that it has been crashing more often than I think is normal ever since I got it, but recently it BSODed 3-4 times a day. I have antivirus and also ran a full malwarebytes scan yesterday, and it only found one little issue which was resolved.
So I am having trouble with my computer since last night it started to give me the blue screen of death every 10-15 minutes with all kinds of different reasons. I cleaned my pc, searched for viruses as much as I could, and I have restored to a different point in time twice. I have tried the windows memory diagnostic twice. No issues. I have tried the files check before start up, no issues were detected.Pfn_list_curruptan attempt was made to write read only memorysomething on the lines of service_system_exeption? Not sure about the last word to be honest I caught it while my computer restarted on its own. Memory_ managment Bad_pool_errorI am not sure what to do I have done all I can by myself. I will be doing a complete restore to manufacture settings after I get something to back up my files. In the meantime maybe I can figure out if it is a hardware issue or if there is something else currupt.
I seem to be having quite the problem on a computer of mine. After recently installing the directx sdk I am unable to logon through normal or safe mode. When I try to boot up normally, I log in but then the monitors go black but everything else seems to run. Pressing ctrl alt delete works and brings up the screen again but if I try to select task manager for example the screen goes black again. When I boot up through safe mode the computer restarts seconds after loading the windows logon screen.
I have Windows 7 on Laptop. My mouse stopped responding in the Windows normal mode but functions fine in the Safe mode. I restarted the laptop several times but the problem remains.
I have a HP Probook 4430s and under device configurations in the F12 options, what does "Numblock on at boot" mean and what does it do. I'm still having troubles booting up.I can start up in safe mode and w/networking and have been trying to figure out how why it dosn't want to work right. When I'm in safe mode everything works fine but when i shut down and try to power back up i can only do it in one of the safe modes, also it takes a really long time to even do that.So I was just wondering what Numblock on at boot ment and what it does.
