Windows 7 Safe Mode Boot Redirecting To Startup Repair
Dec 7, 2012
Earlier today I tripped over a headphone cord and it flung my computer off my desk. I have an HP omni PC. It's the kind that had the computer and the monitor built together. I picked it back up off the floor. The power cord came out on impact. I set everything back up and was relived to hear it turn on. I selected start windows normally (win 7 64 bit) and it sat at starting windows forever. I eventually manually shutdown the computer. I powered back on and I got an option to start windows normally or use startup repair.
I thought it would be a good idea to go into startup repair. It just sat at the light blue screen with the large white mouse sitting there. Nothing happened. Nothing appeared on screen. I turned off the computer again and am just leaving it there for now. I am worried that the hard drive may have been disconnected from the fall and that's why windows won't start. Or maybe the hard drive was damaged. I tried doing a safe mode boot but it redirected me to startup repair.
View 17 Replies
ADVERTISEMENT
May 28, 2011
I recently got a virus 2 days ago. It disable my possibilities from accessing any program or internet. I made a mistake by downloading a windows something ware to boot up security. It then crash...so I went to task manager didnt work, which i then went to search and entered msconfig. I then chose safe mode in minimal services. It then says loading files. U see a black screen with thite letters of the files being loaded. Then u see ur mouse cursor, and then it boots up again and same process. So I tried launch startup repair, it launches a repair, but it says it startup cannot repair this computer automactically. I then result into going to tapping f8..it goes to the screen of advanced options. Problem is if i try safe mode it will crash. I dont have a backup, and i dont want to lose my movies of over 700 gigs.
View 5 Replies
View Related
Mar 10, 2012
every time i turn on my computer, I first get a message from AMI - "SATA 1:S.M.A.R.T. Status BAD". When I press F1 to continue, it progresses normally, until recently when i got "windows is loading files" then "startup repair" instead. Startup Repair searches, then finds a hard disk problem which it cant fix, and I can choose to reboot or try "advanced options"I've already tried safe mode, same thing happens.I've looked around, still not sure how to proceed - what caused this and can it be fixed without replacing my hardware?
View 2 Replies
View Related
Feb 13, 2011
So I was using a program called TuneUp Utilities, and I used this function called the Disk Doctor to check for errors in my computer.While it was checking for errors, my computer shut down automatically and when I started it up again a black screen appears giving me the option to either load Startup Repair or Start Windows Normally. When I start Windows Normally, everything goes fine until I see the cursor. Nothing happens and then the computer restarts on it's own. I've even tried disabling restart on system failure but when I did that the computer just stayed at a dark screen until I restarted it.When I load Startup Repair, it searches for problems for like 5 minutes and then says it can't be automatically fixed. It says to remove all USB cables and everything (which I did but had no effect) and lets me have advanced recovery options.When I load advanced recovery options, all that appears is Startup Repair again.When I press F8 and do a Safe Mode, it starts up normally but once I see the mouse cursor the computer restarts.
View 5 Replies
View Related
Jan 1, 2013
I have recently installed windows ultimate x64 on my computer.i have an asus p6t deluxe v2 mobo, i7-960 cpu and a wd velociraptor hdd. The install went ok, I even managed to restart my computer a few times after but after windows updates installed it won't boot. I tried to boot into safe mode, restore from the installer, and repair, none worked. After startup repair it says: "a patch is preventing the system from starting" and I get a 0x1f error code.(Preventing windows from downloading any updates didn't work either)
View 9 Replies
View Related
Dec 14, 2012
windows 7 startup repair on every boot but after startup repair hibernate works. How to fix?
View 1 Replies
View Related
Dec 2, 2012
when I go to safe mode and hit repair computer they say I have to use a dvd and hit repair. my dvd does not have repair on it I have trouble with startup I do not know how to use the dvd if it has no repair listed
View 9 Replies
View Related
Jun 3, 2012
After attempting to start my Laptop in Safe Mode, it loaded drivers normally only to crash a few seconds later. A prompt message appears but is impossible to read because Windows immediately reboots upon showing the prompt.
View 1 Replies
View Related
Oct 29, 2011
Just out of the blue my laptop won't load up, just after I downloaded AVAST and service pack 1 my laptop has been playing up..It freezes just at the windows logo and when trying to load safe mode it freezes at the driver atipcie.sys and then goes to a black screen where the cursor is just there and nothing else.
View 3 Replies
View Related
Oct 29, 2011
Just out of the blue my laptop won't load up, just after I downloaded AVAST and i think the sertvice pack, my laptop has been playing up..
It freezes just at the windows logo and when trying to load safe mode it freezes at the driver atipcie.sys and then proceeds to go to a black screen with my cursor just in the screen
View 2 Replies
View Related
Dec 8, 2011
I have a Windows 7 installation that I seem to be in an 'endless loop' on. First off, if I just let the system reboot, it comes to the windows 7 splash screen and then reboots again. This will happen endlessly if I let it.If I hit F8 during boot up, I do get the Windows 7 menu. I have tried using the 'repair' options, but they don't succeed in solving the problem. I have tried going into Safe Mode and that also reboots after getting to the 'CLASSPNP.sys' driver (at least that's what it displays on the screen).
So I thought I would just 're-install' Win 7. I boot from my Win 7 DVD, and my options are 'upgrade' or 'clean install'. If I do 'upgrade', the DVD tells me that I need to start Windows first and then run Upgrade. Of course, I CANNOT do that since Windows 7 won't start! I'm afraid to do CLEAN INSTALL as I don't want to lose all the files
View 1 Replies
View Related
Sep 18, 2012
I can only run Windows 7 Home Premium (different computer than the one I'm posting from) in safe mode. When I try to use the Diagnostic Tool, it says that it is saving the files but then it doesn't finish up with giving me the folder on my desktop. How I can get the files to show so that I can attach them to this thread?
View 3 Replies
View Related
Dec 17, 2010
my laptop starts up as the "windows did not shut down properly" screen where I can start windows normal to do repair. When I start windows normally it sends me to the repair screen. And when I select system repair it just freezes at a light blue and geen screen and the only thing showing is my cursor. Ive tried to run the system in safe mode but it freezes at classpnp.sys, and eventually sends me back to the repair screen that is frozen. I don't believe I have my windows 7 installation disk for my laptop so that is out of the equation.
My brother was using my computer and said it was updating when this happened so Im not sure what caused all this.
View 9 Replies
View Related
Mar 9, 2012
The other day i found some ram and decided to try and see if it worked in my Dell desktop computer, when i turned it on it said i couldnt mix different types so i took it out and turned it off, i diddnt even go on it.Today i turned it on and it got to the windows 7 logo and it restarted and said windows failed to start, launch startup repair or start normally. I clicked startup repair but it woulnt work, i tried restoring to an earlier date but that wouldnt work either. I tried safe mode but when it gets to loading it restarts and just goes round in circles.
View 6 Replies
View Related
Jan 24, 2012
Have an Advent laptop here, BSODing when booting with the error message above.Cannot run in safe mode and any start up repair attempts have failed.I have run disk checks both in the Windows start up tool and in Linux and they both say no problems but when I try a system restore it says there is one. Here is the .dmp file and the laptops specs.I also ran sfc /scannow but everytime I do I get a message saying there is a repari waiting for me to restart the laptop and that's all I ever get.[code]
View 9 Replies
View Related
Sep 14, 2012
have a HP Pavilion dv7, uses Windows 7, last night start menu error box pops up, cannot load start menu or desktop, cannot system restore or any suggested ideas, figured I'd go to safe mode .. nothing, completely ignores F8 key tapping or holding.
View 1 Replies
View Related
Jun 24, 2011
After installing windows 7 update plus one optional hardware update 2 days ago, windows wont start, repair itself, or safe boot. What should I do?
View 4 Replies
View Related
Aug 6, 2011
I'm having some trouble starting Windows. First I was having trouble with booting into safe mode so I done some Googling and I found this page and tried it [URL] now not only can I not start my PC in safemode but not in normal mode either, with checking the option for safe mode in msconfig it now keeps trying to start my PC in safe mode over and over again. I also cannot start my PC with the last known configuration.
I tried repair my PC with my DVD but that cannot fix it. There is no system restore point or recovery saved.
View 5 Replies
View Related
Sep 17, 2011
My HP laptop has been running slow and crashing for a few days. I downloaded and ran malwarebytes but it didn't find anything. My AVG 2011 stopped working yesterday and now tonight the laptop won't even start up in safe mode. Its launching straight into windows, then into system repair, which fails.
View 1 Replies
View Related
Jul 16, 2012
my computer was running fine then yesterday i suddenly got shut down and anytime i turned it back on i would get a BSOD after a few seconds unless i went to safe mode its a page_fault_in_nonpaged_area 0x00000050.the only thing different is i downloaded borderlands from steam, played for about 8 hours, then got the packs running, then 10 mins later it shut itself down on its own currently system restore only had 2 options for 8am when i downloaded borderlands, 1 said critical system update adn the other was direct x 9 im not good with computer hardware so if u need any more info tell me, but heres some system stuff System Info Processor: Intel(R) Core(TM) i7 CPU 960 @ 3.20GHz
[code]...
View 9 Replies
View Related
Feb 2, 2011
My Toshiba laptop has been overheating lately. Looked online and saw that this is a common problem with Toshibas. As I currently live in Indonesia (from Tennessee originally) I dont know where to buy the spray cleaner things (yes, thats what I call them...lol i dont know the technical name or brand name.) So when it overheats I usually let it cool down for a bit then restart and just try and keep the bottom elevated so it can cool consistently.
Tonight it overheated and when I went to restart, it restarted normally until it got to the main screen. Things looked ok, but when I moved the mouse it moved for just a second and then everything froze. Not just the mouse, I tried hitting tab,etc to make things move but nothing would happen. Not even the trusty ctl-alt-del magic would happen. I restarted into safe mode and things are ok.
View 8 Replies
View Related
Jul 17, 2012
i just crashed som1 64 bit lennovo laptop while i opperate a 32 bit pc dont have any windows system with me,it wont start on safe mode,and system repair has failed many times.the laptop was running on low battry and it shut itself,when i tryed to reboot it,it automaticly went to system repair which failed
View 2 Replies
View Related
Oct 28, 2012
computer freezes after startup, safe mode works? Moved to Virus & Other Malware
View 2 Replies
View Related
Oct 5, 2012
I can't boot my computer in normal mode or safe mode. When I try to do so, after the "starting windows" page the only things that come up are my mouse, a black screen/background, and a "logonui.exe-bad image- Authui.dll isn't designed to run on windows" error/message (not the exact message). I can't use a system restore (it can't find a restore point), the image recovery tool finds no image to restore from, system repair either doesn't find a problem or can't fix the problem, and basically nothing else works (none of the advanced boot options or other various buttons and tools do anything noticeable). I've even tried to use sfc in command prompt, but whenever I do any sfc things at all (/scannow, verifyonly, verifyfile, etc.) it says there is a system repair pending that requires a reboot. I've restarted 7-8 times and the exact same message keeps coming up. I'm looking for any general help I can get right now, [I can post my computer specifics in an hour when I have time](posted a few). I have an HP pavilion dv6-6135dx wiht Windows 7 x64.Processor: AMD a8-3500m APU, raedon graphics bios vender/version: insyde, f. 20.I'm having trouble getting more info because my computer is still crashing occasionally and I don't really know what else is relevant; if you need more, I might need directions on how to get it. Especially if it involves command prompt.I should also add that it has been crashing more often than I think is normal ever since I got it, but recently it BSODed 3-4 times a day. I have antivirus and also ran a full malwarebytes scan yesterday, and it only found one little issue which was resolved.
View 7 Replies
View Related
May 24, 2012
I seem to be having quite the problem on a computer of mine. After recently installing the directx sdk I am unable to logon through normal or safe mode. When I try to boot up normally, I log in but then the monitors go black but everything else seems to run. Pressing ctrl alt delete works and brings up the screen again but if I try to select task manager for example the screen goes black again. When I boot up through safe mode the computer restarts seconds after loading the windows logon screen.
View 2 Replies
View Related
Jul 26, 2012
Firstly I'm on Windows 7 64. Over the last few weeks I've noticed that after starting up my laptop, and logging in just fine, the screen would go black for a couple of seconds-- my cursor would appear and I could move it around, but the screen would be black. After 10 seconds or so, the Windows 7 GUI would load just fine and there I would be.
I restarted my PC at 5AM this morning and it did the same. All I did at that point was send an e-mail via Gmail and shut it down again. At 2PM I went to startup my PC and everything went as usual except the PC never left that black screen with the responsive cursor.
I searched here and found that problem many times, but with one difference-- my PC starts fine in Safe Mode.
I used Advanced System Care to fix some registry errors and am currently running a Malwarebytes full scan.
It might be worth noting that I recently installed Batman: Arkham Asylum and as it was frequently crashing, followed some advice to enable everything at startup, which I did, fixing my game problem. That was around the time the black screen first started showing up, and I assumed it was a result of more things taking place during Windows startup.
View 1 Replies
View Related
Feb 3, 2012
I have a Toshiba Satellite C655-S5132 that just shut down & now will not boot Windows 7. Just goes to black screen w/blinking cursor then goes to 'startup repair' (which I'm postiive this is a virus of somekind) & will not allow me to do anything. Just repeats itself. I downloaded Windows 7 repair to a CD-R, chgd BIOS settings to CD/DVD to boot first, saved changes, and will NOT pull/boot up from disc. I've tried 2diff repair discs, both do not work. 'F8' does not do anything for me, not able to get to 'safe mode'. Computer is only 2yrs old.
View 9 Replies
View Related
Apr 11, 2012
When I turn on my Acer laptop normally it loads but then completely freezes, not letting me do anything. The only way I can use it is through safe mode. It was working fine before it suddenly broke and it is only a few months old. I thought it might be a virus? I do have up to date anti virus thoug
View 9 Replies
View Related
Mar 15, 2010
I have just reformatted my pc and know i cannot boot into safemode,whenever i try to load up safe mode the pc just resets once i actually getthe windows welcome logo come up just as im about to enter safemode desktop,i have scanned for malware using malwarebytes,bitdefender and superantispyware,but have found nothing
View 9 Replies
View Related
Aug 11, 2011
The other night I hit the reset button at the wrong time and ever since then I'm only able to boot W7 in safe mode. I've tried all of the restore points and repair options but nothing works.
I ran chkdsk from safe mode command prompt and corrupt files were found but I can't run chkdsk /F because the partition is in use. When asked if I'd like to schedule one on next start up I say yes but the restart doesn't get far enough to initialize one. It just hands at "Loading Windows" just after the keyboard lights blink.
I've tried to do an upgrade install but you can't do that while booting from the cd or while in safe mode either.
View 3 Replies
View Related
Jul 11, 2012
sometimes it will reboot in Start-up repair but later i will lose internet connection, then (try to) reboot, then it will not. It's a mindless loop
View 2 Replies
View Related
