Windows 7 Startup Repair On Every Boot But After Startup Repair Hibernate Works?
Dec 14, 2012windows 7 startup repair on every boot but after startup repair hibernate works. How to fix?
View 1 Replies
ADVERTISEMENT
Startup Repair. Nothing Works?
Feb 13, 2012I've read other posts about start up repair and tried what the others are told to fox their problem but nothing works for me. When I turn my computer on I can choose start up repair or start normally. Both options go to the start up repair. I have left it on for hours and nothing happens. I've tried pressing f8 and other buttons but nothing comes up. What now?
View 3 Replies View RelatedWindows 7 Nor Windows 7 Repair Disc Will Not Boot, Keep Getting 'startup Repair'
Feb 3, 2012I have a Toshiba Satellite C655-S5132 that just shut down & now will not boot Windows 7. Just goes to black screen w/blinking cursor then goes to 'startup repair' (which I'm postiive this is a virus of somekind) & will not allow me to do anything. Just repeats itself. I downloaded Windows 7 repair to a CD-R, chgd BIOS settings to CD/DVD to boot first, saved changes, and will NOT pull/boot up from disc. I've tried 2diff repair discs, both do not work. 'F8' does not do anything for me, not able to get to 'safe mode'. Computer is only 2yrs old.
View 9 Replies View RelatedStartup Repair - Windows Cannot Repair This Computer Automatically
May 11, 2011I am pretty sure that a virus cause this, right before my computer shut down on it's own my anti virus popped up and said that a Trojan was found but I didn't have to do anything. Then the computer shut down and when it restartrd started to load files and then go into startup repair, only it couldn't fix it. I tried a restore, but again it said that the startup files wern't there. I just quickly scanned the diagnostic details and noticed something that said "boot critical file C:CI.dll is corrupt".
View 8 Replies View RelatedCan't Boot Into Windows / Startup Repair Can't Fix
Jun 4, 2012I've been having trouble trying to get my computer to boot; I'd noticed a drop in performance (still unsure why) so decided to boot up in safe mode and poke around - it was not my original intention to install AC 5.3.0 but somehow it happened. I ran the 'deep-care' utility and everything was working fine, my computer rebooted and performed a disk check: there weren't any errors that I can remember apart from [something along the lines of] 60 reparse files. Following this my computer restarted and Windows failed to load, restarting to show me startup repair - this isn't the first time this has happened, a similar thing occurred following previous attempts at boosting speed, though before I was able to get Windows up and running using an Ubuntu installation disk... still don't understand why - no need to say that it didn't work this time. Startup repair refuses to work and my system restore points have vanished; I would try doing a repair install if I had a copy of the disk. I built the computer myself a few months back, borrowing a Windows 7 installation disk from a friend (who has now conveniently lost said disk), startup repair does tell me something about 'Problem Signatures'. [code]
View 2 Replies View RelatedWindows 7 Startup Repair On Every Boot
Mar 16, 2011So yesterday I added another hard drive to my computer. I now have 2 SATA hard drives running in my machine. I used the disk managment, and the 2nd hard drive is working as it should.
However, when I shut down my computer and turned it back on, Windows will boot to the Startup Repair screen every time. I checked the BIOS and made sure the boot order was correct, and even took the 2nd hard drive off the boot order in order to make sure it wasn't causing any issues. It's pretty annoying, because every time I start up, I have to wait for the whole repair process before it will load normally. Each time it always says that there are no repairs that could be made.
I also am not able to put my computer in sleep mode any longer. I believe my BIOS setting is set to S1, and before I never had any problems. I would put my comp to sleep and everything would be fine. After the 2nd hard drive, my monitor will turn off and it sounds like 1 of the hard drives turns off, but the CPU and fan are still running and it does not completely go to sleep.
Windows 7 Won't Boot, Goes To Startup Repair
Oct 21, 2012I've got two hard drives with Windows 7 on it. One of them, the operating system crashed entirely, on the other, it's a perfect copy of how the other hard drive was at factory settings (drivers and all). Now, you're probably wondering, hey, why not use the other hard drive? Thing is, I'm trying to save / keep all the programs on the first hard drive in order to save myself the hassle from 1) pretending I'll find / looking for the disks that I know I don't have and 2) the time it'd take to install them.the machine was *not* giving me anything except sending me over to start up repair, stating that it couldn't fix the problem. I used the other hard drive to boot into Windows, and was hoping to do a repair option on the other hard drive. Unfortunately, I don't think that's entirely possible. I used Hirens Boot CD to check out the System32 / Syswow64 folders, and there was hardly anything in there. So, naturally, started copying off certain sub folders from one to the other. Now, I can get it to attempt to boot / it sees the partition / I go to safe mode, and it hits Classpnp.sys for a split second, then startup repair. Startup repair let's me see that there is one root cause, but, after doing its thing, says that it didn't detect an issue with the startup.
1x Sony Vaio laptop 2x Hard drives (one with a factory restored image on it, another one that won't boot into the OS)The hard drive that I need to boot from / one that has my programs goes to Startup Repair after hitting Classpnp.sys in Safe Mode Startup repair has one thing fail (StartupRepairOffline issue), but says it didn't detect a problem / everything booted fine afterwards Attempted to rebuild the BCD (after successful fixmbr / fixboot), but it states it sees 0 installations of windows. However, I have a Windows 7 retail disk that sees the installation folder.
Windows 7 Randomly Crashes On Startup Or Requires System Repair On Startup
Jan 14, 2011Ever since I bought my new computer and installed Windows 7 64 bit Pro I have noticed that sometimes when I start my computer the startup locks up or crashes, requiring me to restart or it takes me to the system repair screen and running this process does nothing.
View 9 Replies View RelatedWindows 7 Won't Startup Properly - Stuck In Startup Repair Loop
Feb 18, 2012I have a Dell Inspiron and a while ago I shut down my PC and the next morning I was faced with options to repair my computer. It hung on the screen for ages before it actually came up with startup repair and supposedly fixed the problem. A few days later, everything got very slow and started to freeze a lot and before long, booting the computer got very slow as well as it hung for about ten minutes on a black screen after the 'welcome' screen before finally starting up. I decided to reinstall the operating system (I did NOT reformat the C drive), so I borrowed my Grandma's external hard drive and copied my files. After reinstalling using a Dell Windows 7 64-bit Home Premium Re-Installation DVD, I copied and deleted the files off the external hard drive onto my PC (I didn't know it would create a Windows.old folder) and started installing programs. Then I left it overnight to install quite a big program. This morning, somehow it had turned off. I turned it on and it gave me the safe mode options and a 'start windows normally' option. I chose the latter and after typing my password it hung on the welcome screen again. I left it for ages and it just went back to the user login screen again. I pressed the red button in the corner to shut it down but it just hung once again on an empty screen so I did a hard shutdown (held down the power button). I turned it on again...startup repair. It gave me the option for system restore, which I did (then realising when it finished that I hadn't made a backup). I booted it, and again it wouldn't start properly. At this time, safe mode booted fine. After trying various things (even using a compressed air can to get rid of dust) and a few hard shutdowns, suddenly every option from the advanced boot menu took me to startup repair except 'Repair your Computer' which gave the normal options for repair (although now it only gives me 2, Startup Repair and DataSafe Restore and Emergency Backup. Now when I do startup repair, some times it says it has fixed the problem, and sometimes it says it cannot be fixed automatically and gives me information on the problem (a few things it said were: 'StartupRepairOffline', 'AutoFailover' and 'CorruptRegistry').
I can't reinstall my computer because then I would lose my precious files.
Is there some way I can save my files and reinstall or even just save my files somehow or am I screwed?
Startup Repair Not Working - Won't Boot Windows
Jul 21, 2012I have searched on this forum and Google to see if others are having the same issue. After updating Windows last week, my computer has been in a consistent state of decline. Today, I powered the CPU down and it will not start-up again. I have attempted to use the windows repair disc, but am now told that startup repair cannot fix my problem.
View 4 Replies View RelatedWindows 7 Won't Start Up, Startup Repair Faliure On Every Boot Up?
Nov 27, 2010with my custom built desktop. My custom built has been acting up like mad only a month after creation. It worked perfectly at first, but then I suddenly found that half of my services were disabled randomly. As well, my computer kept connecting with limited access to my household wireless connection, quite simply meaning I couldn't connect to the internet.Eventually, after throwing all the solutions I could find on the net at it (sfc/scannow, system restore, enabling the systems manually through and elevated control panel and even upgrade installs (with the original OEM system builders disc), I gave up and did a complete reinstall, wiping everything on my hard drive and starting again.Unlike the upgrade install I attempted, this actually worked and my computer worked perfectly...until I updated windows. After downloading the 53 updates windows update thought I needed, when I booted up my computer the next time, the internet stopped working again, with half of my services stopped (including Diagnostics Repair).Now every time I boot up my computer, I come to a Startup Repair screen that fails every time.Here is the message I get: Startup Repair cannot repair this computer automaticallyProblem signature:Problem Event Name:StartupRepairOfflineProblem Signature 01:6.1.7600.16385Problem Signature 02: 6.1.7600.16385Problem Signature 03: unknownProblem Signature 04: 21200686Problem Signature 05: AutoFailoverProblem Signature 06: 3
View 9 Replies View RelatedWindows 7 Will Not Boot - Startup Cannot Repair This Computer Automatically
Apr 7, 2011I have a toshiba laptop that runs windows 7 32bit home premium and it is not booting properly. When I turn it on t will show the microsoft logo and says "starting windows" but never gets past that point. I have tried all the fixes to no avail including, safe mode (will not boot into safe mode..starts to load but stops at drivers/atipcie.sys and sits there for a minute or two and goes to the repair startup recommended screen. I have tried startup repair and done it many times because I have read it can take several times (it says "startup repair cannot repair this computer automatically") I have tried the windows repair disc using system restore but it says no restore points found, even though i know they are on my computer. All of my school files are on this computer and while I have some of there backed up on a external hard drive there are some more recent files that are not. What can I try without a clean install to try and repair this?
View 2 Replies View RelatedWindows 7 Won't Boot, Startup Repair Doesn't Work
Sep 21, 2012I've had an ongoing war with my PC for four days now. I have Windows 7 and it refuses to start up. Originally I tried starting up normal, it gave me two choices: system repair or start as normal. If I chose normal it would show the windows logo then reset. If I chose repair it would turn black for several minutes, then go to a blue screen for several minutes and wouldn't move past that. So i tried to boot from CD. I have the option of installing windows or repair. I chose repair, once again it goes to the blue screen and nothing happens (and I've left it on this blue screen a good 15 min mind you.) Finally I submitted and decided to just re-install windows. it goes to the starting setup... and sits there indefinably.
View 5 Replies View RelatedWindows 7 Won't Boot - Startup Repair Doesn't Load Either
Dec 2, 2012I tried turning on my computer today and it gets stuck at the "Starting Windows" logo. It just hangs there indefinitely (usually only takes a couple seconds) and doesn't load. I then tried startup repair, and that just takes me to a black screen. After that, I tried putting in my Windows 7 boot disc to do a clean install, told the BIOS to boot to CD/DVD drive. It tells me to press a key, I do. I get "Windows is loading files" and then it goes back to "Starting Windows" forever, yet again. This happened so suddenly, it was working fine just hours before this.
View 3 Replies View RelatedWindows 7 Startup Repair Completes But Window Fails To Boot
Dec 13, 2012After rebooting my system, it recommended that i do a start up repair. After the repair completed i recieved the black screen right before choosing USER, so i tried 3x more to repair which each completed but same outcome till the point it just says cant repair automatically . Then i tried to system restore which failed also , but the catch is my system boots fine from Safe Mode.. what to do from Safe Mode to return my boot up back to normal?
View 4 Replies View RelatedWindows 7 Safe Mode Boot Redirecting To Startup Repair
Dec 7, 2012Earlier today I tripped over a headphone cord and it flung my computer off my desk. I have an HP omni PC. It's the kind that had the computer and the monitor built together. I picked it back up off the floor. The power cord came out on impact. I set everything back up and was relived to hear it turn on. I selected start windows normally (win 7 64 bit) and it sat at starting windows forever. I eventually manually shutdown the computer. I powered back on and I got an option to start windows normally or use startup repair.
I thought it would be a good idea to go into startup repair. It just sat at the light blue screen with the large white mouse sitting there. Nothing happened. Nothing appeared on screen. I turned off the computer again and am just leaving it there for now. I am worried that the hard drive may have been disconnected from the fall and that's why windows won't start. Or maybe the hard drive was damaged. I tried doing a safe mode boot but it redirected me to startup repair.
Computer Going Into Startup Repair On Boot?
Apr 17, 2012On boot it is taking him to the windows 7 startup repair which fails with StartUpRepairOflline AutoFailover CorruptFile
I have suggested the following, all which have failed to make a difference:
bootrec.exe with /fixmbr /fixboot and /RebuildBcd
Run chkdsk
Startup repair
System Restore - two dates tried
The pc is about a month or so old, and I'm thinking it could be a hardware issue, hard drive?
Two things I am going to try when I get there is a WD Diagnostics on the Hard drive, and the sfc
Startup Repair Or Boot Into BSOD
Dec 26, 2012Recently my computer has been randomly just giving me the BSOD. Normally this problem was resolved by a simple restart but tonight about an hour before I posted this, the blue screen sent me back to startup but instead of giving me the usual "Security mode" and Regular Startup. It gave me Startup Repair and normal startup. After clicking normal startup just to see if it would correct itself like normal,my pc instantly BSOD'd, bringing me back to my two options. I've been sitting here staring at the startup repair screen for about an hour now.
View 2 Replies View RelatedLaptop Won't Boot Up (can Only Go To Startup Repair)
Feb 11, 2013I have a pavillion dv6- laptop that's stopped being able to boot up windows? It only goes to the screen with the option of starting windows normally (which brings me back to the same screen) or going to startup repair. When I go to repair it says Got some important data in c drive can't install new windows all data will wipe up what to do now?
View 3 Replies View RelatedStartup Repair At Boot - Can't Get To Desktop
May 24, 2009I used windows update and updated my nividia 9600 drivers and now for the past couple days I have been unable to reach my desktop. It boots to startup repair and does a short scan then finally says it was unable to help will either shut down, restart or scan again. I've DL'd a vista repair to restore but it doesn't have any restore points and I was able to get onto a DE language linux version of my computer but haven't been able to fix it there, partly cus i cant read most of what im seeing.
View 9 Replies View RelatedStartup Repair Boot Loop?
Dec 26, 2011I get into startup repair everytime i boot my pc which is never successful. I am definitely goin to explain it in detail but dis is basic problem nd plz dont mind typing coz m typing fast on iphone which may cause errors in typing!Yesterday,i used my pc for 7-8 hrs continuosly which is not big deal but due to it i can't figure out my action which caused problem. I kept it on for downloading at night nd when in morning i got boot screen which comes when pc is directly turned off. I did Start Windows Normally nd i got usual windows 7 loading animation for a secong nd den it started startup repair after that everytime i boot it takes me to startup repair resulting in continuos failure. I hv googled nd found many threads but none matched my exact one. Startup infinity loop didn't work. Below r given few conclusions nd obstacles-1.) i can't get into advanced boot options using F8. But i can get into recovery menu using install dvd nd view advanced options frm startup repair.
2.) System restore din't work. I mean its not successful in restoring.3.) bootrec.exe didnt work4.) imp point to be noted is my last update was on 23 dec while pc worked fine on 24 th & 25th dec means dont knw wat happened 25th night that caused this problem on 26th morning.5.) sfc/scannow says "a startup repair is left to be completed." it says to complete that first then use sfc/scannow.6.) chkdsk results in last line saying failed to transfer log......7.) i also get a report like many others about that problem signature.8.) repair install not possible coz windows can't start only.9.)i hv made a backup using cmd but is there any way without clean install?
Boot From VHD Startup Repair Failed?
Apr 27, 2011My OS is Windows 7 Ultimate x64 and its boot by vhd.
One day, it failed to go to Windows and stuck at Startup Repair. I think it was caused by invalid driver.
But anyway, my concern is the Startup repair is unable to repair a Windows that is installed in a vhd. Then what should I gonna to do?
Startup Repair Cant Repair Computer Automatically?
Oct 5, 2012I cannot get my computer to restart. It tries to restart but keeps saying that startup repair cannot repair computer automatically. I try to do a system restore but it won't let me do that either
View 1 Replies View RelatedStartup Repair Cannot Repair Computer Automatically?
Mar 24, 2012On start up a black and white gateway screen flashes followed by a startup Repair window.This gives me a pop up that says Startup Repair cannot repair this computer automatically.There is the option of sending the information to microsoft or viewing problem details.When looking at the details, Problem Signature:Problem Event Name:StartupRepairOfflineProblem Signature 01:6.1.7600.16385Problem Signature 02:6.1.7600.16385Problem Signature 03:unknownProblem Signature 04: 21200290Problem Signature 05:AutoFailoverProblem Signature 06:11Problem Signature 07: CorruptFileOS Version:6.1.7601.2.1.0.256.1Locale ID:1033Underneath the pop up box, The startup Repair window says WIndows cannot repair this computer automaticallywith the option of viewing diagmostic repair details or viewing advanced options for system recovery and support Under the advanced options, I have tried the startup repair, the system restore, the command promptchkdsk/f/rNone of which have worked Prior to this the notebook was working fine last night, I did not install anythingI ran the Farbar Recovery Scan ToolMod Edit: Removed FRST data, this is a malware tool not permitted in this forum and you have made no indication that this is a malware situation ~ Hamluis.
View 7 Replies View RelatedStartup Repair Cannot Repair This Computer Automatically
Jul 31, 2010Start up repair cannot repair this computer automatically , I am getting this all of the time now when starting the PC ,i am sure it started when a new video card got put in but not sure?
View 2 Replies View RelatedStartup Repair Cannot Repair This Computer Automatically?
Mar 10, 2011I have no idea what was the last thing done on this computer (it is my wifes), but I do know that every now and then there has been a disc failure, checking disc startup, but it has always had a positive outcome.[CODE]
View 4 Replies View RelatedStartup Repair Could Not Repair This Computer Automatically
Jul 24, 2012i use ubuntu OS and windows7 professional on an HP dv5 notebook, last week i made a mistake in that i removed the battery while the machine was on as i was using windows7. the time i tried to restart it again it recommended startup repair which ran but 'could not repair it automatically' i tried the f8 options but to no avail. when i run scan and memory diagnostics all are successful but the system can still boot. am able to view my data on windows through ubuntu but ubuntu can't execute windows programs. what should i do to restore windows without loosing data?
View 5 Replies View RelatedWindows 7 Stuck In Endless Boot Cycle Startup Repair Freezes
Jan 22, 2012So, I'm not exactly sure what I did. I was clearing up some space on my computer after using the Norton Removal Tool to get rid of this Norton trial popup that came up everytime I booted my computer. Now, after it told me to restart, it seems to be stuck in an endless boot cycle that resets itself after showing the Windows logo. I've since tried running startup repair, which freezes as it shows the progress bar for 'Windows is loading files'. Safe mode will not work, either. It just sends it back into the boot cycle. Not sure what to do at this point. My computer came pre-installed with Windows 7 Home Premium 64bit, so I don't have any startup discs.
View 3 Replies View RelatedWindows 7 Boot Up Stuck At Starting Screen - Startup Repair Offline
Dec 10, 2010Windows wont boot up I get stuck on the "starting windows screen" Startup Repair cannot repair this computer automatically:
Problem signature:
�Problem Event Name: StartupRepair Offline
�Problem Signature 01: 6.1.7600.16385
�Problem Signature 02: 6.1.7600.16385
�Problem Signature 03: unknown
�Problem Signature 04: 21200718
�Problem Signature 05: AutoFailover
�Problem Signature 06: 10
�Problem Signature 07: BadDriver
�OS Version: 6.1.7600.2.0.0.256.1
�Locale ID: 1033
Computer Will Not Boot. Startup Repair Is Offline?
Jul 28, 2011When I start up my computer, It shows the DELL logo. Then, it shows a grey bar that spans the screen saying "Windows is loading files..." Next a green bar that says: "Microsoft Corporation" Startup repair automatically starts. It runs for a little while and then it says:
"Startup Repair cannot repair cannot repair this computer automatically
->Send information about this problem (recommended)
->Dont Send
[V] View problem details"
The problem details are:
"Problem signature: Problem Event Name: StartupRepairOffline
Problem Signature 01: 6.1.7600.16385
Problem Signature 02: 6.1.7600.16385
Problem Signature 03: unknown
Problem Signature 04: 21200906
Problem Signature 05: AutoFailover
Problem Signature 06: 14
Problem Signature 07: CorruptFile
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033"
If I click advanced View advanced options for system recovery and support, I get a list of things to do.System Restore and System Image Recovery have no restore points. The Windows Memory Diagnostic comes up with nothing. I do have access to the Command Prompt.
Classpnp.sys, Black Screen During Startup Repair And Boot?
Dec 20, 20111 year back I upgraded vista to windows 7 Home premium.3 days back I had problem - my starting windows page was hanged and was not proceeding forward, also All types of safe mode was getting stuck on classpnp.sys.After reading many forums I booted with USB (mounted with windows 7) and used command prompt and deleted all "pcmcia" realted files from C drive. Now using F8 function I can't use any option (all option safe mode, low resolution, startup repair,etc won't work, even changes in Bios setting won't work). Also now while booting my PC with USB, after starting windows page, black screen appears with white arrow and it won't go further this black screen so now I can't even use command prompt & Installation option
View 9 Replies View Related
