System Image On System Restore Disk Not Reading After Crash?
Oct 2, 2012
Using preinstalled Win 7 Home Premium 64bit on an HP 6813w Pavilion. The original hard drive, a Hitachi HDS721010CLA332 1Tb crashed.1) System Recovery discs was made along with a System Recovery with System Image disc.2) A more current System Image was made on an external hard drive.The Hitachi was replaced with the same model. Checked bios to make sure it was installed correctly.Under System Recovery, Image Restore, Select a System Image Backup there is nothing in the table to choose from as far as a source (disc drive or external drive).A) System Recovery (3 discs) has the HP preinstall file folder on the 3rd disc but is not read by the System Recovery program.B) Under System Restore, Image Restore, Advanced, it asks for a network or driver to be installed. That opens up the directory of C: which is the external hard drive. Under WindowsImageBackup the computer name is identified followed by three entries:[CODE]It seems to me the Recovery and System Restore discs are not functional. Am not a technical person but I have taken this as far as I know how at this point.Printed out all the instructions from HP and Microsoft to follow step by step but the failed discs will not allow me to move forward.
i was unable to create a restore point(or should i say the restore point which were created were all shown up with this following error earlier, Error message was: "System Restore" did not complete successfully. Your computer's system files and settings were not changed."Details: An unspecified error occurred during System Restore (0xc0000022).Anyways,today as i was updating my display driver,while uninstalling the old display driver and installing the latest one,my system didn't accept the driver and thus my system went out of order(more preciously,as i uninstalled the whole catalyst control centre,every icon was appearing bigger and my display adapter was also deleted). now, coming back to the problem, when i tried to go back to a restre point ,i actaually managed to get all my previous settings back but after the completion of system restore that same message was again there which saidError message was: "System Restore" did not complete successfully. Your computer's system files and settings were not changed."Details: An unspecified error occurred during System Restore (0xc0000022).Now,i am a bit confused to what actually happened as all my settings were back and the system was there in its previous setings but then why i got that error message?
Been awhile since I've been around here. I'm stuck with a new problem. My desktop's OS hard drive crashed/is crashing. After testing several pieces of hardware and reseating numerous items, I got lucky and was able to boot into safe mode, once. My event viewer is full of disk errors. Pages and pages of disk errors. *Side note: Sure would've been nice if Windows would have said something */End Side note* So I have a Windows System Image and Windows Backup on a secondary drive that appears healthy. But I'm just curious what I'm looking at when my new hard drive gets here.Has anyone ever used the Windows 7 Image Backup/Restore utility? Can you use the image on a different hard drive or just when repairing the original? Will my programs be saved or just data? Just curious questions. All of my Google searches are bringing up reviews about the utility from the Win 7 RC days so I'm not real sure what I'm getting myself into here.
i have recently taken a system image of my entire system,using Windows own.İ would like to hear from anybody here,who has done,the same,AND restored the image successfully
So I booted into my other hard drives win 7 pro installation. Then I saved that system image onto my hard drive where the new windows 7 pro install is. After booting into the new windows install, then rebooting and going through the wizard and using the backed up image from the old windows 7 pro install it appears as if nothing is installed, no programs, drivers, themes, visuals etc. It's as if I didn't do anything at all.
I have a HP pavilion p6823 and one day it wouldnt go past the blue hp screen that has the setup and BIOS options. Well I used a system repair disk and it told me i needed system image disks so I put the last disk in like it said, and now it is giving me this message.Error details: Windows did not find any fixed disk that can be used to recreate volumes present in backup. Ensure disks are online, and disk drivers are installed to access the disk(s). 'diskpart.exe' tool with list disks command can be used to see the list of available fixed disks on the system.
I am trying to restore a bran new install of win 7 with a sytem image created previously before a hardware failure.The machine is a lenov think centerClean install installed and the image is about 70 gig It is house on a 1tb external driveThe internal drive on the machine is 160gbI get to the restore screen it finds the image then gives me the first errorSays you must boot the machine for a recovery disk then try againOk so i stuck my usb stick in and started up it, clicked repair my computer , found the image, and started it againNow it throws the 80042407 error. Active disk in Bios is to small.How is that possible. The image is 70 gig the hard drive is 160 gb?
I was wondering, there seems to be four ways to restore a windows 7 system image:
1. Backup and Restore --> Recover system settings and computer --> Open System Restore --> Choose System Image Restore Point.
2. Backup and Restore --> Recover system settings and computer --> Advanced recovery methods --> Use a system image you created earlier to recover your computer.
3. Boot computer from system repair disk and choose the appropriate option
4. Boot computer from win7 installation DVD and choose the appropriate option
What is the difference between these four ways of restoring or are they completely equivalent? How about the options in the system restore (checkboxes, etc..), I don't think they are self-explanatory, do you have any links where they would be explained well?
I am attempting to restore from a system image, but keep receiving a boot manager error message: Status: 0xc000000e Info: The boot selection failed because a required device is inaccessible
The computer boots no problem normally, it is only when restarting to restore the system image.
So way back when I installed windows on my SSD I made a system image restore doohickey, using the "Create A System Image" tool, once I had applied all the necessary settings, installed drivers, etc. Now, windows is experiencing problems and I wish to restore to this back up. How on earth do I do this? The images don't have any kind of runnable-files inside to use. And when I use the recovery disk it says it cant find any image. Ive explored windows various restore utilities and the likes, and at no point does it simply say something like "Please select the file location of your restore image". I have the system image doohickey just sitting there...how do I tell windows to just use that backup? It all seems to be trying to do it in some automated fashion..
I just installed a ssd harddrive. Windows (7) backup discs ran fine. System image restore seems to have worked fine, only thing is programs are not showing up. This is my first time doing this and everthing I read, prior to, lead me to believe the programs would be included in the system image.
I currently can't make a system image or restore point. The error I receive for the system image attempt is: The backup failed. Windows Backup timed-out before the shared protection point was created. (0x80780021)
All discussion will pertain to Windows 7 Backup w/ NTFS disks w/ample space. Period. It shouldn't matter if the disks are simple or dynamic. The simple situation is this: I have one simple NTFS boot disk that failed months after system image backups to my other internal HDD. So then I replace this boot disk w/ a new one. So Am I able to restore the system image from the HDD onto to the new boot disk?
I am trying to restore my computer because it launches into system recovery. After I get to the recovery options I tried to do system restore but it tells me there isn't enough space on the disk.
I recently reinstalled windows 7 and the programs that I like and created a system image which I burned to a blu-ray and also placed on an external HDD.I just purchased a 120 GB SSD to replace my 250 GB old-skool hard drive which contains my windows installation.Can I use the system image to reinstall windows to the new SSD or would it be better to do a fresh install? Does windows configure itself differently during setup on a SSD rather than a traditional HDD? If so, will that cause any problems by restoring the image onto the SSD?I only ask because using the system image to reinstall everything would go a lot faster than reinstalling windows + all the programs I included on the recovery image.
i been thinking of upgrading to windows 8 but i might have to go back to windows 7 if things don't' work out as its a possibility.my question is if i return to windows 7 will making a system restore image install all my drivers i need once i go back to windows 7 going back to windows 7 with re-installation DVD
when I have had the PC on to update or back it up it has rebooted itself. No one else uses this computer but me so I am unsure what is going on with it. Can someone give me some kind of idea where to stat on this problem?
I have a hp dv 9700 laptop that has crash, I have being experiences a few problems recently and have manage to fix it my self when it crash before with system repair disk that I brought of the internet. The following message keep on coming up when booting A Disk Read Error Occurred. I think I might of mess the laptop up buy setting the setting as default throw bios, I am looking for free software that I can download on a disk or usb and then reformat it or try to repair it via a system repair disk, I am aware there are software that you have buy over the net, but I believe in doing the job yourself free.
Computer management -> Disk management -> attach VHD The VHD attaches fine, and it is the correct file. But when it attaches I get the message: "you need to format the disk in drive F: before you can use it. Do you want to format it?" I clicked cancel, and then tried to right click -> explore. I then got the message: "F: is not accessible. The file or directory is corrupted and unreadable."Out of all the tutorials I have read, the file should open just fine and let me explore it. Why is it asking me to format the disk? And is it safe to do so?The file system is listed as "RAW" and the status is "Healthy(primary partition)"I don't want to lose everything on the system image! Can I/should I format the disk?
I am going to try to create a second partition on my hard drive and the software I am using to do this (MiniTool Partition Wizard) says I should back up everything in case something goes wrong. I have made a system image on another portable hard drive. I have an OEM version of windows 7 and I am wondering whether i can boot from the disk and use it to restore my system from the system image I have created in case something goes wrong.
This isnt the first time i use the windows backup to create a system image, ive done it before using this external hdd with no problems at all.But now, for some reason it wont detect this hard drive, it only gives me the option to store the image on a dvd, i dont know why?, i tested the hard drive on a different computer and IT WORKS, i tried to create an image and it does work.
I have this laptop with Windows 7 as the operating system and with a capacity of 500 GB. My HDD was making loud noises and weird noises so I brought it to the shop and they told me to change the HDD because it might die anytime. So I did a full backup on my external hard disk, meaning that I cloned my laptop. I changed my 500gb HDD with a 240gb SSD. And when I tried to restore my backup files into the new drive, there's an error: "no disk that can be used for recovering the system disk can be found".
So I did some research on the internet and found out the reason of the error: it's because the image created was from a bigger drive than the new drive I put into my laptop. Even though my backup files are only about 100gb, I still cant restore it to my 240gb SSD because the image created was from my 500gb HDD. I am going to copy my backup files into an external hardisk with a capacity of 200gb and then backup from that drive and then I will restore it into my 240gb SSD. Will the backup file be considered as a backup from the 200gb drive or from the original 500gb HDD?
I don't know if this is a harware issue with my SSD, disk controller (motherboard), power supply or something else, but depending on what I'm doing, the computer will operate for a few minutes then freeze and eventually reboot itself. When it reboots, I get the "Bootmgr is Missing" message until I cycle power a couple of times. I've tried booting from the Windows 7 repair disk and typing "bootrec /fixboot", but the problem eventually returns.I can't get a full image update from Acronis because it hangs in the middle of the image, even if I say to ignore bad sectors. If I run the HDTune diagnostic on the SSD, it seems to always stop after about 3 minutes and always in the same spot, at 15,432MB. Is this a problem with the SSD or the disk controller?
Configuration:
O/S: OS Microsoft Windows 7 Ultimate (6.1.7601 Service Pack 1 Build 7601) Motherboard: Gigabyte GA-MA78LMT-S2 CPU: AMD Phenom(tm) II X4 840 Processor, 3200 Mhz, 4 Core(s), 4 Logical Processor(s) BIOS Version/Date:Award Software International, Inc. F13, 8/31/2010 SSD:Microcenter SSD G2 series 64GB ATA Device HDD:Hitachi HDS721010CLA332 ATA Device (1TB) RAM:8GB
Does anyone know how to schedule/automate a rollback to a system restore point at a set time each day?What i'm trying to do is:1. Disable the standard system restore behavior for creating restore points when installing apps and drivers.2. Automatically/schedule a restore point to be created every morning. (probably using Task Scheduler)3. Automatically/schedule a rollback to that morning restore point every night.This should allow users to mess up the workstation during the day, and restore a working rollback point at night when users are not using a workstation.Updates are scheduled at nighttime, so before that happens, it should rollback to a good restore point, apply updates, then create a working "new" restore point with the updates in the morning....etc.
My laptop hard drive is formatted as Dynamic, but i want to convert disk to Basic and restore the same system and continue work. i used backup and restore to create system disk and saved on a external hard drive, my question is if i restore the system image will restore process create dynamic partition or basic when restoring? will there be a option to select with partition table i want to create before restore?
I have an HP laptop with Windows 7 home premium. When using the HP Recovery manager to create system restore disks, everythong goes ok until I get through the point where it tells me that I will need 4 DVDs and that I should insert one. After inserting the disk, the drive spins for a coouple of seconds, then I get the messages:"There was a problem burning this disk.""There was an error burning this disk. The disk might no longer be usable."I retried several times, inserting different blank DVD-R disks, but always get the same result
I have never had the need t use this disk till now but as I am getting problems starting up I tried System Restore and it didn't work (I have tried 2 restore points).Can I use the repair disk that I created on my HP desktop to mend the system or to restore it to an earlier time ? When I open the repair disk on the computer it just shows a couple of folders (boot ,sources as well as a file called bootmgr but I can't see a hrep file to let me know what I can do...