Why does windows put two drives in the "Include a system image of drives" option ?
I only want to backup C:
What is causing this?
My F: disk is only storage no system files as i know of.
how can i make a backup/ system image for my internal and external hard drives at the same time?
View 4 Replies View Relatedcan u backup your data (or an system image)to an internal and external hard drives at the same time?
View 1 Replies View RelatedI created an image using the Microsoft Backup and Restore tool in Windows 7. I saved the image on a network shared folder.I then went to the Advanced Recovery Methods in Windows to restore my image...that I just created. It restarts the computer and goes into recovery mode, I point to where the image is located, I entered the network credentials and it give me an error. "The Specified network resource or device is no longer available. (0x80070037)"
View 5 Replies View RelatedI need a little help figuring this out. I made a backup image a while back on my network. Now that I want to re-image, I reboot as requested, wait for it to load, and Windows says it can't find my backup, "if it is on a network, close this window , type the network location."Putting in the network location does nothing, I'm just returned to the screen where it would list the backup image if it had found it, but there's nothing there.Thinking perhaps my NAS was the problem I copied the image onto a portable hard drive, but after rebooting into the restore program, Windows 7 doesn't find the USB drive.
View 9 Replies View Relatedam trying to do a backup of my Win 7 system drive (C, but the backup utility is saying that it must backup by non-system drives (E: and H, which happen to have "System Volume Information" folders on them. They are not system drives. E: is my main utilities drive and H: is my games drive.Somehow, Windows thinks they are system drives, when in reality they aren't.Any ideas on how to change them? When I go in to Disk Management, they are not showing as system drives. They are all partitions on the same hard drive, but there are other partitions not included in the backup.
View 3 Replies View RelatedI need a backup utility that will recognize that a file has changed and over-write the existing backup version if there is one already. Looking at cobian backup. Time and time again I see talk of an image backup. Why do I need that? I am given to understand win 7 has a restore point so if stuff fails one can go to the last restore point without losing too much. Why is this restore point not sufficient? Why do I need an image - how is it better/what exactly does that do? How large is it likely to get?
View 10 Replies View RelatedToday, this morning, I did a system image restore, just to test if it works.
The system image was included in the backup of yesterday, 11/5/2009.
The image restore went smooth, Windows 7 is correctly restored and is running like it always did.
One thing I do not understand, the status of the backup is The last backup was canceled, and also the size of the backup is Not available
I hope someone can explain why this is?
Is it possible to resotre individual files from a full Image Backup? I Created a System Image. If this is possible, how is it done?
View 3 Replies View RelatedI have got a license for Acronis True Image Home 2010. To my surprise, I don't like it unlike many other folks who swear on this software.Acronis creates a backup image in .tib or .zip format whereas Windows 7 Backup and Restore creates system image in an encrypted folder (with all files and folders NOT formatted). In either case, backup image becomes ready for "restore". So why keep Acronis? Well, Acronis can backup custom files and folders unlike Windows 7 default program (and, Windows 7 does it, too), however, Acronis does "Create full path (includes drive letter)" which I simply dislike. Fbackup4 (free license), on the other hand, does not do it but does the job the way I want, i.e., creates files and folders the way they are organized (without including drive letter, and without zipping or making some unusual file format). So for data backup, Fbackup4 is better, IMO. I remember, WinXP creates crazy backup file format like Acronis does.Paragon Migrate OS to SSD SE (I have license for this, too) is special in the sense that it can copy the entire OS drive/partition to a blank drive. Very good for drive upgrade.
View 1 Replies View RelatedWe are a small office, 5 or 6 computers. Only 3 are every day computers, other 3 are "server", admin and extra computer. The three in use every day are new win7pro x64 machines. Our server is xp pro (32bit) with a shared drive as our "server" drive. We access this for all our job related materials, etc. There is no network setup, just shared folders among our workgroup. we just got the new win7pro machines setup and are using Windows Backup function to create system images to the "server" computer in a shared folder. We've got the images created on 2 computers, and can see the .vhd files and associated folder structure. When testing to see if we could restore from these images, we got the error "Cannot locate backup sets on machine, etc."I moved the backup folder to the root of the drive, and made sure it was WindowsImageBackup or whatever the default is, but still could not find it.
View 8 Replies View RelatedOK, so a couple of days ago, my HP desktop crashed and then went through the whole System Recovery loop(I couldn't login to Safe mode, wouldn't let me past the System Recovery Screen). Well I backed up the entire C drive using Backup your files in the menu. Then it shows you all the file types it will back up; i.e photos, videos, e-mails and bookmarks. So I did that to an external hard drive and it comes out to 143GB.Now comes my problem. I've been able to copy everything from the external hard drive using RecoveryMgr.exe which opens the WIM files and saves them to my C: hard drive under System Recovery Files. However it does not seem to work when it comes to putting in my old Thunderbird e-mails, contacts and such or in Firefox to restore my bookmarks, saved passwords.
View 1 Replies View RelatedUsing preinstalled Win 7 Home Premium 64bit on an HP 6813w Pavilion. The original hard drive, a Hitachi HDS721010CLA332 1Tb crashed.1) System Recovery discs was made along with a System Recovery with System Image disc.2) A more current System Image was made on an external hard drive.The Hitachi was replaced with the same model. Checked bios to make sure it was installed correctly.Under System Recovery, Image Restore, Select a System Image Backup there is nothing in the table to choose from as far as a source (disc drive or external drive).A) System Recovery (3 discs) has the HP preinstall file folder on the 3rd disc but is not read by the System Recovery program.B) Under System Restore, Image Restore, Advanced, it asks for a network or driver to be installed. That opens up the directory of C: which is the external hard drive. Under WindowsImageBackup the computer name is identified followed by three entries:[CODE]It seems to me the Recovery and System Restore discs are not functional. Am not a technical person but I have taken this as far as I know how at this point.Printed out all the instructions from HP and Microsoft to follow step by step but the failed discs will not allow me to move forward.
View 2 Replies View RelatedDid a fresh install of Windows 7 64-bit and all my apps, deleted Windows.old, defrag'ed and activated. Then created a SYSTEM IMAGE using Win 7 BACKUP and RESTORE, so far so good.
Win 7 and my apps take up 43.9 GB on the hard drive but the SYSTEM IMAGE it created on my external drive is only 23.7 GB. Tried it on my laptop with similar results ISO was about half the HDD. Does that sound right? Just seems the ISO should have matched the HDD GB-wise unless it compresses or something.
I perform an incremental back-up every day using the built-in backup program.
How often would you do a whole system image? I was thinking of only doing that every few months or less. Each image would be 80GB.
I have been have some problems with my HP dv 8500 laptop. It has vista on it. I could not get any windows updates. So I backed up my files to a flashdrive and did a system recovery. I have files on the flash drive but cannot transfer them back to the laptop. I would love it if someone could guide me through the process.
View 9 Replies View RelatedI have a system image that was saved to a maxtor one touch ext HD via USB. This was created using Windows 7 image making system. I am trying to copy the image to my new HDD (internal) 1TB. The problem is when I go to recovery>advanced options>restore from image and reboot, the PC cannot find the image. I can click advanced options and search for a driver and actually see the drive and the image folder/zips but Windows 7 cannot detect it. I have also copied this image to a internall HDD because I thought it may be the USB. I have not changed any BIOS settings as I am using Windows 7 on the 1TB HDD and trying to restore to that from either the Dnetouch or the F:internal HDD. Neither times will it find the image.uestions. Do I need to use an alternate program like paragon or clonezilla2. When the image is saved, it is the name of my pc. Example: Fesktop64-PC. Does it need to be in a folder or the image be a specific name? Ive seen WindowsImageBackup as a possiblity.
View 6 Replies View RelatedI am going to upgrade to Windows 8 Consumer Preview, so before doing so I backed up Windows 7 as a system image to my external hard drive. In doing so, I forgot that a system image includes all the files on the drive, which means it backed up about 700 GB worth of data. That's OK except I already had those files backed up individually, so now my external drive is basically out of space for future use. Instead, what I'd like to do, is do a system image of factory state without having to lose the files already on my drive. Is that possible? I could always go back to factory condition, and save the system image, but then I'd have to re-add all my programs and files after I get the Windows 8 upgrade completed. I'd rather not have to do that unless it's an emergency.
View 5 Replies View Relatedi just ran the Windows 7 systems image bu first time. completed and created recovery disk. message said completed.when i look at my external hard drive, the created file contains 0 bytes; this doesn't seem right to me based on previous imaging software I have used.
View 4 Replies View RelatedWhen I use Win 7 backup, it gives me the option each time I create a backup to create a system image. I created a system image on a CD a couple of days ago. Why does it ask me if I want to create another each time I do the backup? Is it talking about creating one on my hard drive, not a CD?
If it's just my hard drive then perhaps I should create one each time, but creating one on a CD is onerous. Plus, if this is the case, (that it wants me to create a CD) I don't know how that's to be done if the backup is on a schedule in the middle of the night.
I have run the "create system image" successfully until today. I have an external HD for that image file. It appears to run, goes through the steps and says it has created the image. But when I go to the external HD and click on the Image file that was created there is nothing there. It shows 0. What could I have done to do this. I even looked for that image file on my C: drive, just in case, but it is not there either.
View 4 Replies View RelatedI'm trying to make a system image and configure backups but I'm unable to select the internal drive that has the space I need.
I have a 1Tb drive portioned into C: [Windows 7] and D: [Data]
and a 750Gb drive [H:] that used to have XP on it that I want to put my backups on.
I used to dual boot XP and Windows 7.
Computer Management > Disk Management shows
C: Healthy (Boot, Page File, Active, Crash Dumo, Primary Partition)
D: Healthy (Primary Partition)
H: Healthy (System, Active, Primary Partition)
System Imaging/Backup help says you can't backup to the system (startup) drive (not sure why?)
Is there any way to change which drive is designated as the system drive?
I've removed the dual boot and used bcdedit on C: to only reference itself
What's else do I need to do to make C: the system drive?
i have a dell laptop with Windows 7 Ultimate installed on my C:/ which is 160Gigs. I also have a 2T ext Hard drive Partitioned into, 3 Partitions,F,(500G)G(500G),H(1T),Back in 10/23/11 i had made a backup of my C:/ to my F:/ with a system image. i attempted to make a End of year backup and system image to the F:/, and the backup said i could not back up to the F:/ or G:/ ( both drives has Data on them but they also have enough free space for the backups),so i decided to use the H:/ to do the backup, the backup is including the F;/ in the backup which i do not want backed up,( because it already has a system image and a backup there already) so i manually told the backup to do the C:/ and it still wants to include the F:/ in the backup, I even reset the Windows backup to the default and tried to do a first time ( let me choose what to back up) and still it wants to include the F:/ in the backup and system image,all i would like to do is a simple backup of my C;/, why does Windows insist on including the F:/ in the backup when i explicitly tell it not to, and how would i go about doing a backup of JUST my C;/ ?,Would i have to remove the initial backup an system image from the F:/?
View 3 Replies View RelatedI been backup my system to second internal hard drive E. But the system image file take almost 160 gb that take up too much space. So I want to change to backup my system to an external hard drive. Now even I did delete all backup files in E: drive. But looks like that 160 gb system image still in my E: drive. Because when I check my E: drive properties I still missing 160 gb space so I think that system image still in there somewhere. How can I completely delete that system image to free up that 160 gb space on my hard drive.
View 3 Replies View RelatedI recently got a SSD for my comp, before installing I did a backup of windows and included the system image option. I am now on a fresh install of windows but can only restore the files I had on my old windows and not the entirety of windows (programs, program settings.. ect). How can I use this image to put everything back exactly the way it was before?
View 8 Replies View RelatedOn the Backup and Restore page, it lists the two Thread title options?-
I read that you can't restore individual files from system image, but I'm wondering if I need to create both in order to do an emergency system restore using boot disc/or... (D: drive)?
I have tried every trick in the book to creat a system image whether directly or via backup computer. I am receiving those error messages; 0x8078011D when I try to create a System Image from the left bar and; 0x81000032 when using backup computer.
View 5 Replies View Relatedwhen I have had the PC on to update or back it up it has rebooted itself. No one else uses this computer but me so I am unsure what is going on with it. Can someone give me some kind of idea where to stat on this problem?
View 10 Replies View RelatedI have 3 drives in my system,
- 64gb boot Health System Active
- 640g Apps Health Primary 376gfree
- 500g storage Healthy Primary 496gfree
I'm trying to a backup with a system image, It says for the storage drive when selected that it will not do a system image. But when I select the 640, it doesn't say it won't, but will not let me choose any files from that drive. Not sure what is going on.
I have a system image created in Vista with external, internal hard drive is done. i replaced internal and installed windows 7. Can i use any of the information from this system image backup? Is there anyway to read the drive and pick out some of the important files? i don't need the whole system restore but would like as much of the old info as possible.
View 1 Replies View RelatedMy laptop has been backing up once a week fine (except for an error about a missing file that is on the target drive, not the backup drive) for months. In the past few days, it has suddenly failed with repeated attempts to backup, it always stalls at 57% while creating a system image. I've tried a clean boot, same results. I'm backing up to a network drive (USB hard drive attached to the router), 274GB free of 458 total, and the total backup size has been pretty small as no heavy data is kept on the computer.
Lenovo SL510
Windows 7 Professional