Today, this morning, I did a system image restore, just to test if it works.
The system image was included in the backup of yesterday, 11/5/2009.
The image restore went smooth, Windows 7 is correctly restored and is running like it always did.
One thing I do not understand, the status of the backup is The last backup was canceled, and also the size of the backup is Not available
I hope someone can explain why this is?
I created an image using the Microsoft Backup and Restore tool in Windows 7. I saved the image on a network shared folder.I then went to the Advanced Recovery Methods in Windows to restore my image...that I just created. It restarts the computer and goes into recovery mode, I point to where the image is located, I entered the network credentials and it give me an error. "The Specified network resource or device is no longer available. (0x80070037)"
View 5 Replies View RelatedI need a little help figuring this out. I made a backup image a while back on my network. Now that I want to re-image, I reboot as requested, wait for it to load, and Windows says it can't find my backup, "if it is on a network, close this window , type the network location."Putting in the network location does nothing, I'm just returned to the screen where it would list the backup image if it had found it, but there's nothing there.Thinking perhaps my NAS was the problem I copied the image onto a portable hard drive, but after rebooting into the restore program, Windows 7 doesn't find the USB drive.
View 9 Replies View RelatedI need a backup utility that will recognize that a file has changed and over-write the existing backup version if there is one already. Looking at cobian backup. Time and time again I see talk of an image backup. Why do I need that? I am given to understand win 7 has a restore point so if stuff fails one can go to the last restore point without losing too much. Why is this restore point not sufficient? Why do I need an image - how is it better/what exactly does that do? How large is it likely to get?
View 10 Replies View RelatedWhy does windows put two drives in the "Include a system image of drives" option ?
I only want to backup C:
What is causing this?
My F: disk is only storage no system files as i know of.
Is it possible to resotre individual files from a full Image Backup? I Created a System Image. If this is possible, how is it done?
View 3 Replies View RelatedI have got a license for Acronis True Image Home 2010. To my surprise, I don't like it unlike many other folks who swear on this software.Acronis creates a backup image in .tib or .zip format whereas Windows 7 Backup and Restore creates system image in an encrypted folder (with all files and folders NOT formatted). In either case, backup image becomes ready for "restore". So why keep Acronis? Well, Acronis can backup custom files and folders unlike Windows 7 default program (and, Windows 7 does it, too), however, Acronis does "Create full path (includes drive letter)" which I simply dislike. Fbackup4 (free license), on the other hand, does not do it but does the job the way I want, i.e., creates files and folders the way they are organized (without including drive letter, and without zipping or making some unusual file format). So for data backup, Fbackup4 is better, IMO. I remember, WinXP creates crazy backup file format like Acronis does.Paragon Migrate OS to SSD SE (I have license for this, too) is special in the sense that it can copy the entire OS drive/partition to a blank drive. Very good for drive upgrade.
View 1 Replies View RelatedWe are a small office, 5 or 6 computers. Only 3 are every day computers, other 3 are "server", admin and extra computer. The three in use every day are new win7pro x64 machines. Our server is xp pro (32bit) with a shared drive as our "server" drive. We access this for all our job related materials, etc. There is no network setup, just shared folders among our workgroup. we just got the new win7pro machines setup and are using Windows Backup function to create system images to the "server" computer in a shared folder. We've got the images created on 2 computers, and can see the .vhd files and associated folder structure. When testing to see if we could restore from these images, we got the error "Cannot locate backup sets on machine, etc."I moved the backup folder to the root of the drive, and made sure it was WindowsImageBackup or whatever the default is, but still could not find it.
View 8 Replies View RelatedTomorrow my new Samsung netbook will be delivered, Windows 7 Starter is preinstalled. I haven't had a netbook before, and I haven't used Windows 7 before.
I'd like to make an image of the HDD immediately after unpacking. I need to play around with Windows 7 and I probably want to remove bloatware. I may even want to install Ubuntu Netbook Edition. But in any case, I'd like to able to restore the original, clean HDD image.
What would be the best strategy to do this? Make an image (using eg. Partition Image) before even starting up Windows 7? Make an image after running Windows 7 once (perhaps it needs to register / validate / activate)? I do not want to get into trouble with multiple activation.
I have a desktop PC with 2 x 1 GB discs which has a startup problem. When I start the PC up I get a screen Saying SMART status bad, Backup and Replace. Press F1 to run setup. When I do this, I get the ASUS EFI BIOS UTILITY screen giving various options. Pressing the "Boot Menu" button gives me 6 options. Pressing the SATA ST option results in the message "A disc read error occurred press CTRL + ALT + del to restart" on a black screen. I have a Windows 7 repair disc, but how do I get the PC to default to it when the DVD drive is not an option on the "Boot Menu". I have a Windows backup on an external drive.
View 3 Replies View RelatedHow to Create a System Image Backup in Windows 7 ?
View 0 Replies View Relatedif i do a back up image of my C drive can i then create a partition on the that HDD and then create a second OS using that image of C drive?
hope that makes sense
also can you update images or would you need to create new ones to keep them upto date?
I'm running Windows 7 64x Home Premium on a Toshiba Qosmio X505 laptop. I just got it back from the warranty repair center, where they replaced the hard drive and graphics fan & heatsink, and reloaded the factory windows version. Before I sent it out for repair, I used Windows Backup to create a backup of all my files on a Toshiba casio 500GB external USB drive (I had over 300 GB of files, so it was easier to use Windows Backup than drag and drop all the files, at least at the time). Now that I have the laptop back, I'm having trouble restoring my files. When I go to Control Panel-> Backup & Restore, a message appears in the restore section, saying "Windows could not find a backup for this computer." I've tried reconnecting the drive as well as restarting my computer, but to no avail. I can see and explore the files in My Computer, so I know the hard drive is properly connected.
View 7 Replies View RelatedOK, so a couple of days ago, my HP desktop crashed and then went through the whole System Recovery loop(I couldn't login to Safe mode, wouldn't let me past the System Recovery Screen). Well I backed up the entire C drive using Backup your files in the menu. Then it shows you all the file types it will back up; i.e photos, videos, e-mails and bookmarks. So I did that to an external hard drive and it comes out to 143GB.Now comes my problem. I've been able to copy everything from the external hard drive using RecoveryMgr.exe which opens the WIM files and saves them to my C: hard drive under System Recovery Files. However it does not seem to work when it comes to putting in my old Thunderbird e-mails, contacts and such or in Firefox to restore my bookmarks, saved passwords.
View 1 Replies View RelatedWhen you wish to recover your system using this utility, do you use the Windows program at desktop or the rescue disc I created from the program?The reasn I ask is because I used to have better luck using Acronis' disc rather than the program and wonderd if the same applied here.Also, does the backup remove the existing one so that you only have one at a time or can you have more than one.
View 2 Replies View RelatedI currently use Vista Ultimate. I am preparing to move to Windows 7. Is it possible to restore files from Vista Backup and Restore Center to Windows 7 after a clean install?
View 3 Replies View RelatedI have been have some problems with my HP dv 8500 laptop. It has vista on it. I could not get any windows updates. So I backed up my files to a flashdrive and did a system recovery. I have files on the flash drive but cannot transfer them back to the laptop. I would love it if someone could guide me through the process.
View 9 Replies View RelatedI have an old HD that I used to use for backups in a different PC setup, and though I deleted those backups when I moved on to a different HD, the backups were recoverable using Pandora and I believe intact since I never used the drive in question after that time. So specifically, I now have a folder called "Backup Set 2011-02-13 190024" that contains a 84 zipped folders worth 13.1GB that comprise that backup, and I want to restore them in some automatic fashion to see what's actually worth salvaging. (I assume this doesn't have to be done one-folder-at-a-time, drilling down through five layers of branches in the folder-tree, and almost immediately forgetting where I am...) But when I look at "Backup and Restore," I can't bring up this or any target folders - the link "Select another backup to restore files from" produces a blank set of choices, and there doesn't appear to be any way to 'load' a particular folder to restore, as I would have expected.
View 4 Replies View RelatedSo a couple of days ago my computer started to act up but this morning when i turned it on, i got a blue screen and it never wanted to turn on ever since. So i tried reinstalling Windows 7 again on the current system because i do not want to lose my pictures. Is there any way to fix this?
View 2 Replies View RelatedI have a SanDisk Extreme SSD, 120MB, as my drive "C" dedicated to the OS and programs. I tried to use [COLOR=blue !important][COLOR=blue !important]Acronis [COLOR=blue !important]True[/COLOR][/COLOR][/COLOR] Image to make an image backup to two different drives on my system. In both cases it failed and trashed the hard drives.
View 4 Replies View RelatedThe other day I did a WindowsImageBackup,put it on the (I) drive. Right after the back up my desktop icons wont stay in place, never had that problem before. Can I just right click on the backup and delete the folder,or is there a way to do this that is safe.I dont want to run into any problems,just want to see if the icons get back to where I put them.
View 2 Replies View RelatedDid a fresh install of Windows 7 64-bit and all my apps, deleted Windows.old, defrag'ed and activated. Then created a SYSTEM IMAGE using Win 7 BACKUP and RESTORE, so far so good.
Win 7 and my apps take up 43.9 GB on the hard drive but the SYSTEM IMAGE it created on my external drive is only 23.7 GB. Tried it on my laptop with similar results ISO was about half the HDD. Does that sound right? Just seems the ISO should have matched the HDD GB-wise unless it compresses or something.
I perform an incremental back-up every day using the built-in backup program.
How often would you do a whole system image? I was thinking of only doing that every few months or less. Each image would be 80GB.
I think that's what it's called. anyway something more then just a backup. One that you don't have to reinstall your software to get it into the registry.
Do I need special software? or is there a utility in Windows 7. If not what do I need to buy?
I just.. just finished Windows 7 installation. Now my D drive is failing. Both drives are the same make model and old, in fact they were in an older computer and almost everything in the pc was updated except the harddrives because they are more then sufficient in size.
So maybe I should replace them both. But I don't want to go through the pain of reinstalling. Anyway, I usually have to reinstall due to my husbands email "joke sharing" practice usually gives us a virus about twice a year.
This backup would be very helpful, I just never looked into it until now.
just attempting my first back up image on my new build. I only have one HD with Win 7 prof on a 200gb partition and 750ish remaining on the hd.Should I do it on the 200gb partition with win 7 on or the storage partition with 750 or create a new partition of ?
View 6 Replies View RelatedI have a large number of image files on my C: Drive. 337,000 files. Many are duplicates. I want to back these up to a new drive and edit them there. Is there a way of doing this with Windows 7 backup? Or some other free backup utility?
Windows 7 Home and Business 32bit
I have a system image that was saved to a maxtor one touch ext HD via USB. This was created using Windows 7 image making system. I am trying to copy the image to my new HDD (internal) 1TB. The problem is when I go to recovery>advanced options>restore from image and reboot, the PC cannot find the image. I can click advanced options and search for a driver and actually see the drive and the image folder/zips but Windows 7 cannot detect it. I have also copied this image to a internall HDD because I thought it may be the USB. I have not changed any BIOS settings as I am using Windows 7 on the 1TB HDD and trying to restore to that from either the Dnetouch or the F:internal HDD. Neither times will it find the image.uestions. Do I need to use an alternate program like paragon or clonezilla2. When the image is saved, it is the name of my pc. Example: Fesktop64-PC. Does it need to be in a folder or the image be a specific name? Ive seen WindowsImageBackup as a possiblity.
View 6 Replies View RelatedI am going to upgrade to Windows 8 Consumer Preview, so before doing so I backed up Windows 7 as a system image to my external hard drive. In doing so, I forgot that a system image includes all the files on the drive, which means it backed up about 700 GB worth of data. That's OK except I already had those files backed up individually, so now my external drive is basically out of space for future use. Instead, what I'd like to do, is do a system image of factory state without having to lose the files already on my drive. Is that possible? I could always go back to factory condition, and save the system image, but then I'd have to re-add all my programs and files after I get the Windows 8 upgrade completed. I'd rather not have to do that unless it's an emergency.
View 5 Replies View RelatedMy problem is if I restart with HDD on,it freezes when windows logo pops up during startup. I have a bunch of saved stuff on the external besides the backup img.Its a 500gb.It still froze when I only had 10gb saved on it. Will it delete everything I have saved on my external if I boot the img? I have a extra 20gb laying around,it is large enough to hold my saved backup.
View 2 Replies View Relatedi just ran the Windows 7 systems image bu first time. completed and created recovery disk. message said completed.when i look at my external hard drive, the created file contains 0 bytes; this doesn't seem right to me based on previous imaging software I have used.
View 4 Replies View RelatedI have a couple of these older drives in good condition is it possible to install one and backup my OS/image file from my sata drive, and be able to restore in case of system crash? Or should I get another Sata drive or usb flash drive instead?
View 3 Replies View Related
