Image Restore Can't Find Backup Image?

Aug 24, 2009

I need a little help figuring this out. I made a backup image a while back on my network. Now that I want to re-image, I reboot as requested, wait for it to load, and Windows says it can't find my backup, "if it is on a network, close this window , type the network location."Putting in the network location does nothing, I'm just returned to the screen where it would list the backup image if it had found it, but there's nothing there.Thinking perhaps my NAS was the problem I copied the image onto a portable hard drive, but after rebooting into the restore program, Windows 7 doesn't find the USB drive.

View 9 Replies


ADVERTISEMENT

Created A Backup Image Using The Microsoft Backup Utility And Now Can't Restore?

Aug 9, 2011

I created an image using the Microsoft Backup and Restore tool in Windows 7. I saved the image on a network shared folder.I then went to the Advanced Recovery Methods in Windows to restore my image...that I just created. It restarts the computer and goes into recovery mode, I point to where the image is located, I entered the network credentials and it give me an error. "The Specified network resource or device is no longer available. (0x80070037)"

View 5 Replies View Related

Image Backup - Why Restore Point Not Sufficient

Mar 31, 2012

I need a backup utility that will recognize that a file has changed and over-write the existing backup version if there is one already. Looking at cobian backup. Time and time again I see talk of an image backup. Why do I need that? I am given to understand win 7 has a restore point so if stuff fails one can go to the last restore point without losing too much. Why is this restore point not sufficient? Why do I need an image - how is it better/what exactly does that do? How large is it likely to get?

View 10 Replies View Related

Status Backup Canceled After Image Restore

Nov 6, 2009

Today, this morning, I did a system image restore, just to test if it works.

The system image was included in the backup of yesterday, 11/5/2009.

The image restore went smooth, Windows 7 is correctly restored and is running like it always did.

One thing I do not understand, the status of the backup is The last backup was canceled, and also the size of the backup is Not available

I hope someone can explain why this is?

View 8 Replies View Related

Restore Cannot Find Network Image?

Dec 17, 2010

I am trying to restore my Dell E6510 Windows 7 64-bit Pro. laptop from a image created by Windows backup that is located on a share on a network drive. Using windows explorer, I can view the image folder. I have not renamed or moved the folder. When I run the Windows restore process, restore does not automaticly find the image so I click on the network button, type in the network share and type in the correct user and password. I receive the message "network share cannot be found. code 0x800704cf"

how to connect to the network image.

View 3 Replies View Related

Windows 7 Can't Find Restore Image?

Jul 15, 2012

I created an image backup with Windows 7. It created a large VHD file and appeared tocomplete correctly. I copied the image to my thumb drive and tried to do a restore. I can find the thumb drive and browse it and all the files are there but if I try to do a restore it doesn't find the restore image. I also tried putting it on a network drive - it can'tfind it there even though I point it to the share it is in.I've tried using a restore CD, as well as installing Windows and using the recovery in control panel.The folder structure is asfollowsWindowsImageBackupcomputernameunder that folder are three foldersbackup 2012-07-15 232717CatalogSPPMetadataCachemetadataidIt seems odd there is no obvious way to just say this is the VHD - right here in this folder - use it and restore.

View 1 Replies View Related

Backup And Restore Multiple System Image Drives

Oct 28, 2009

Why does windows put two drives in the "Include a system image of drives" option ?

I only want to backup C:

What is causing this?

My F: disk is only storage no system files as i know of.

View 9 Replies View Related

Restore Individual Files From Full Image Backup

Nov 3, 2009

Is it possible to resotre individual files from a full Image Backup? I Created a System Image. If this is possible, how is it done?

View 3 Replies View Related

Acronis True Image Home Different From Windows 7 Backup And Restore?

Jan 11, 2012

I have got a license for Acronis True Image Home 2010. To my surprise, I don't like it unlike many other folks who swear on this software.Acronis creates a backup image in .tib or .zip format whereas Windows 7 Backup and Restore creates system image in an encrypted folder (with all files and folders NOT formatted). In either case, backup image becomes ready for "restore". So why keep Acronis? Well, Acronis can backup custom files and folders unlike Windows 7 default program (and, Windows 7 does it, too), however, Acronis does "Create full path (includes drive letter)" which I simply dislike. Fbackup4 (free license), on the other hand, does not do it but does the job the way I want, i.e., creates files and folders the way they are organized (without including drive letter, and without zipping or making some unusual file format). So for data backup, Fbackup4 is better, IMO. I remember, WinXP creates crazy backup file format like Acronis does.Paragon Migrate OS to SSD SE (I have license for this, too) is special in the sense that it can copy the entire OS drive/partition to a blank drive. Very good for drive upgrade.

View 1 Replies View Related

Backup Image - Create A Second OS Using That Image Of C Driv

Nov 22, 2009

if i do a back up image of my C drive can i then create a partition on the that HDD and then create a second OS using that image of C drive?

hope that makes sense

also can you update images or would you need to create new ones to keep them upto date?

View 3 Replies View Related

Restore Windows Backup Image Files From Network Location (XP Machine)

Feb 20, 2012

We are a small office, 5 or 6 computers. Only 3 are every day computers, other 3 are "server", admin and extra computer. The three in use every day are new win7pro x64 machines. Our server is xp pro (32bit) with a shared drive as our "server" drive. We access this for all our job related materials, etc. There is no network setup, just shared folders among our workgroup. we just got the new win7pro machines setup and are using Windows Backup function to create system images to the "server" computer in a shared folder. We've got the images created on 2 computers, and can see the .vhd files and associated folder structure. When testing to see if we could restore from these images, we got the error "Cannot locate backup sets on machine, etc."I moved the backup folder to the root of the drive, and made sure it was WindowsImageBackup or whatever the default is, but still could not find it.

View 8 Replies View Related

Backup And Restore "fresh" Windows 7 Disk Image?

Feb 17, 2011

Tomorrow my new Samsung netbook will be delivered, Windows 7 Starter is preinstalled. I haven't had a netbook before, and I haven't used Windows 7 before.

I'd like to make an image of the HDD immediately after unpacking. I need to play around with Windows 7 and I probably want to remove bloatware. I may even want to install Ubuntu Netbook Edition. But in any case, I'd like to able to restore the original, clean HDD image.

What would be the best strategy to do this? Make an image (using eg. Partition Image) before even starting up Windows 7? Make an image after running Windows 7 once (perhaps it needs to register / validate / activate)? I do not want to get into trouble with multiple activation.

View 2 Replies View Related

Backup Complete Computer - Create An Image Backup

Nov 22, 2008

How to Create a System Image Backup in Windows 7 ?

View 0 Replies View Related

Get SSD Image Backup?

Jun 18, 2012

I have a SanDisk Extreme SSD, 120MB, as my drive "C" dedicated to the OS and programs. I tried to use [COLOR=blue !important][COLOR=blue !important]Acronis [COLOR=blue !important]True[/COLOR][/COLOR][/COLOR] Image to make an image backup to two different drives on my system. In both cases it failed and trashed the hard drives.

View 4 Replies View Related

System Image On External Hard Drive Is Not Accessible While Restoring PC From Image

Sep 4, 2011

OS: Windows 7 Home Premium 32 bit The windows system image backed up on my external hard drive (2TB WD USB3) is not showing while restoring the PC from an image.

The only option available is my hard drive partition on which i also had saved a system image. Though windows recommends External hard drive for backing up image when backing up the system.

View 4 Replies View Related

How To Delete Image Backup

Aug 18, 2012

The other day I did a WindowsImageBackup,put it on the (I) drive. Right after the back up my desktop icons wont stay in place, never had that problem before. Can I just right click on the backup and delete the folder,or is there a way to do this that is safe.I dont want to run into any problems,just want to see if the icons get back to where I put them.

View 2 Replies View Related

Iso Backup SYSTEM IMAGE

Oct 30, 2009

Did a fresh install of Windows 7 64-bit and all my apps, deleted Windows.old, defrag'ed and activated. Then created a SYSTEM IMAGE using Win 7 BACKUP and RESTORE, so far so good.

Win 7 and my apps take up 43.9 GB on the hard drive but the SYSTEM IMAGE it created on my external drive is only 23.7 GB. Tried it on my laptop with similar results ISO was about half the HDD. Does that sound right? Just seems the ISO should have matched the HDD GB-wise unless it compresses or something.

View 9 Replies View Related

Backup Of System Image

Nov 7, 2009

I perform an incremental back-up every day using the built-in backup program.

How often would you do a whole system image? I was thinking of only doing that every few months or less. Each image would be 80GB.

View 5 Replies View Related

An Image Backup Of C Drive

Nov 11, 2009

I think that's what it's called. anyway something more then just a backup. One that you don't have to reinstall your software to get it into the registry.

Do I need special software? or is there a utility in Windows 7. If not what do I need to buy?

I just.. just finished Windows 7 installation. Now my D drive is failing. Both drives are the same make model and old, in fact they were in an older computer and almost everything in the pc was updated except the harddrives because they are more then sufficient in size.

So maybe I should replace them both. But I don't want to go through the pain of reinstalling. Anyway, I usually have to reinstall due to my husbands email "joke sharing" practice usually gives us a virus about twice a year.

This backup would be very helpful, I just never looked into it until now.

View 6 Replies View Related

First Backup Image, Where To Save

Oct 11, 2011

just attempting my first back up image on my new build. I only have one HD with Win 7 prof on a 200gb partition and 750ish remaining on the hd.Should I do it on the 200gb partition with win 7 on or the storage partition with 750 or create a new partition of ?

View 6 Replies View Related

Want To Backup Uncompressed Image Files?

Sep 18, 2011

I have a large number of image files on my C: Drive. 337,000 files. Many are duplicates. I want to back these up to a new drive and edit them there. Is there a way of doing this with Windows 7 backup? Or some other free backup utility?

Windows 7 Home and Business 32bit

View 4 Replies View Related

System Image Backup Cannot Be Found?

Oct 15, 2011

I have a system image that was saved to a maxtor one touch ext HD via USB. This was created using Windows 7 image making system. I am trying to copy the image to my new HDD (internal) 1TB. The problem is when I go to recovery>advanced options>restore from image and reboot, the PC cannot find the image. I can click advanced options and search for a driver and actually see the drive and the image folder/zips but Windows 7 cannot detect it. I have also copied this image to a internall HDD because I thought it may be the USB. I have not changed any BIOS settings as I am using Windows 7 on the 1TB HDD and trying to restore to that from either the Dnetouch or the F:internal HDD. Neither times will it find the image.uestions. Do I need to use an alternate program like paragon or clonezilla2. When the image is saved, it is the name of my pc. Example: Fesktop64-PC. Does it need to be in a folder or the image be a specific name? Ive seen WindowsImageBackup as a possiblity.

View 6 Replies View Related

Windows System Image Backup

Apr 8, 2012

I am going to upgrade to Windows 8 Consumer Preview, so before doing so I backed up Windows 7 as a system image to my external hard drive. In doing so, I forgot that a system image includes all the files on the drive, which means it backed up about 700 GB worth of data. That's OK except I already had those files backed up individually, so now my external drive is basically out of space for future use. Instead, what I'd like to do, is do a system image of factory state without having to lose the files already on my drive. Is that possible? I could always go back to factory condition, and save the system image, but then I'd have to re-add all my programs and files after I get the Windows 8 upgrade completed. I'd rather not have to do that unless it's an emergency.

View 5 Replies View Related

Put Full Backup Image On External HDD?

Sep 20, 2012

My problem is if I restart with HDD on,it freezes when windows logo pops up during startup. I have a bunch of saved stuff on the external besides the backup img.Its a 500gb.It still froze when I only had 10gb saved on it. Will it delete everything I have saved on my external if I boot the img? I have a extra 20gb laying around,it is large enough to hold my saved backup.

View 2 Replies View Related

Windows 7 System Image Backup

Oct 7, 2012

i just ran the Windows 7 systems image bu first time. completed and created recovery disk. message said completed.when i look at my external hard drive, the created file contains 0 bytes; this doesn't seem right to me based on previous imaging software I have used.

View 4 Replies View Related

Using An IDE Hd For Backup Image From A Sata Drive?

Oct 10, 2012

I have a couple of these older drives in good condition is it possible to install one and backup my OS/image file from my sata drive, and be able to restore in case of system crash? Or should I get another Sata drive or usb flash drive instead?

View 3 Replies View Related

Deleting A Windows Image Backup?

Nov 3, 2012

I have a windows image backup which is taking up 60gb. I need to delete it but i dont know if its safe to just delete normally.

View 2 Replies View Related

Image Backup Tool To Transfer?

Jan 9, 2013

Right now I am backing up all my files and folders through SyncToy (for easy access) but I'd like to also back up my entire Windows image with the same kind of automatic method (only transfers changes from the previous backup). Is there a free or paid program that does this?

View 5 Replies View Related

Partition The Drive With The Backup Image?

Nov 17, 2011

I have a 1TB external hard drive that I will use to make a Backup Image. I'm going to Use Symantec Ghost to make a backup Image.Should I partition the External hard drive first? I would also like to use it to store other files and folders. If so, how big should the partition with the backup Images be?How large is a typical Image backup file? I also plan on backing up 2 other linux machines.

View 7 Replies View Related

Create System Image After Each Backup

Nov 2, 2009

When I use Win 7 backup, it gives me the option each time I create a backup to create a system image. I created a system image on a CD a couple of days ago. Why does it ask me if I want to create another each time I do the backup? Is it talking about creating one on my hard drive, not a CD?

If it's just my hard drive then perhaps I should create one each time, but creating one on a CD is onerous. Plus, if this is the case, (that it wants me to create a CD) I don't know how that's to be done if the backup is on a schedule in the middle of the night.

View 3 Replies View Related

Complete PC Backup Image Folder

Apr 12, 2009

I don't know if this has been asked already and sorry if it has.

Is there a way to save both Vista and Windows 7 complete system image on the same partition? If possible rename the folders at least (I tried this but didn't work)?

I have a limited space in my hard drive and allocated only one partition for system backups. I'm quite happy with Windows 7 and I would like to have both Vista and Windows 7 backups just in case. I'm also trying to avoid multiple DVDs as backup media as much as possible so that restoring the image would be easier for my kid when i'm not around.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved