I have a 1TB external hard drive that I will use to make a Backup Image. I'm going to Use Symantec Ghost to make a backup Image.Should I partition the External hard drive first? I would also like to use it to store other files and folders. If so, how big should the partition with the backup Images be?How large is a typical Image backup file? I also plan on backing up 2 other linux machines.
View 7 RepliesI think that's what it's called. anyway something more then just a backup. One that you don't have to reinstall your software to get it into the registry.
Do I need special software? or is there a utility in Windows 7. If not what do I need to buy?
I just.. just finished Windows 7 installation. Now my D drive is failing. Both drives are the same make model and old, in fact they were in an older computer and almost everything in the pc was updated except the harddrives because they are more then sufficient in size.
So maybe I should replace them both. But I don't want to go through the pain of reinstalling. Anyway, I usually have to reinstall due to my husbands email "joke sharing" practice usually gives us a virus about twice a year.
This backup would be very helpful, I just never looked into it until now.
I have a couple of these older drives in good condition is it possible to install one and backup my OS/image file from my sata drive, and be able to restore in case of system crash? Or should I get another Sata drive or usb flash drive instead?
View 3 Replies View RelatedWould like opinions on preferred easy full image back-up apps.
View 2 Replies View RelatedI have 3 drives in my system,
- 64gb boot Health System Active
- 640g Apps Health Primary 376gfree
- 500g storage Healthy Primary 496gfree
I'm trying to a backup with a system image, It says for the storage drive when selected that it will not do a system image. But when I select the 640, it doesn't say it won't, but will not let me choose any files from that drive. Not sure what is going on.
SSD boot drive failed after just 5 weeks. It takes me an entire weekend(at least) to reinstall and reset everything. Not to mention lost saved passwords and some other important data that I did not get backed up which leads me to my question. Can I use my Last Windows Image backup to install on the new boot drive and if so how?
View 2 Replies View RelatedI am replacing my HHD with a SSD and made a mirror image on my backup external drive. When I tried to do the system image recovery, it fails to find the recovery information. It says the no disk that can be used for recovering the system disk can be found.
View 6 Replies View RelatedI have 2x160gb intel SSD disks running as RAID0. Recently my motherboard had failed and I replaced it with new one (different model). Couldn't access OS because apparently some RAID data is kept on the motherboard and that was gone, so I decided to use a backup. Booted from windows 7 installation disk and selected backup,
I click on 'repair', get to the 'select a system image backup'. Select 'use the latest available system image (recommended). Click 'next' I get the message 'all disk to be restored will be formatted and replaced with the layout and data in the system image'. Click Yes. But then got an error saying:
"The system image restore failed. The disk that is set as active in BIOS is too small to recover the original system disk. Replace the disk with a larger one and retry the restore operation. (0x80042407)"
Disk is completely empty with only 1 partition (deleted all partitions and reformatted and then created one). Before motherboard problem I had several partitions, but I imagine that restore would recreate them. Why do I get 'disk to small error' when I am restoring on the same disk? RAID configuration problem? Could stripe size be an issue here?
My OS: Windows 7 64 Professional
how to create windows image bootable partion in my hard drive
View 1 Replies View RelatedI was wondering if this would work as a poor man's backup system for Windows 7.
1) Take my daughter's laptop with Windows 7 Ultimate on it and partition the only hard disk to have a C: drive (125 Gigs) and E: drive (75 gigs).
2) Setup Windows 7 backup to backup data and disk image of the C: drive TO the E: drive.
Works OK on backup if the hard drive fails, you loose everything C: and E: but if you want a quick fix for virus attacks on the C: drive, or a quick way to restore files to the C: drive.the 64 dollar question... I haven't tested this part yet but can you RESTORE the E: drive image of the C: drive using the SYSTEM REPAIR DISK ?? Would the restoration reformat the entire hard drive, and in effect crash the restore before it starts? Or would it just reformat the C: drive partition??
I created an image using the Microsoft Backup and Restore tool in Windows 7. I saved the image on a network shared folder.I then went to the Advanced Recovery Methods in Windows to restore my image...that I just created. It restarts the computer and goes into recovery mode, I point to where the image is located, I entered the network credentials and it give me an error. "The Specified network resource or device is no longer available. (0x80070037)"
View 5 Replies View RelatedHow to Create a System Image Backup in Windows 7 ?
View 0 Replies View RelatedI need a little help figuring this out. I made a backup image a while back on my network. Now that I want to re-image, I reboot as requested, wait for it to load, and Windows says it can't find my backup, "if it is on a network, close this window , type the network location."Putting in the network location does nothing, I'm just returned to the screen where it would list the backup image if it had found it, but there's nothing there.Thinking perhaps my NAS was the problem I copied the image onto a portable hard drive, but after rebooting into the restore program, Windows 7 doesn't find the USB drive.
View 9 Replies View Relatedif i do a back up image of my C drive can i then create a partition on the that HDD and then create a second OS using that image of C drive?
hope that makes sense
also can you update images or would you need to create new ones to keep them upto date?
new hard drive? I want to replace my slow green drive with a wd 7200 rpm black driveBefore I install windows 8. Can I use windows 7 drive image program to do this?
View 3 Replies View RelatedI'm preparing a fresh install of Win 7 Pro on a 2 disk system (90GB SSD and 1TB HDD). I'll be placing the OS/Apps on the SSD and Data and image restore files on HDD.Qs:1. If I allocate ~60GB for the OS/Apps partition, and actual storage of the OS/Apps is 35GB...what size partition do I need on the HDD to save this image file? I assume the compressed file will be 45-50% of original. Will I want to store multiple image files created over the course of time as apps are added and system is further optimized, and hence need a partition that is a multiple of the OS/App partition size? What do you do?2. Also, an 8GB RamDisk will serve as scratch disk space for some apps (RamDisk +) which can save an image of the session's writes upon shutdown. I plan to save this image to the 2nd HDD. Is it recommended that I save this to same partition that stores the OS/App image in Q #1 above,
View 9 Replies View RelatedOS: Windows 7 Home Premium 32 bit The windows system image backed up on my external hard drive (2TB WD USB3) is not showing while restoring the PC from an image.
The only option available is my hard drive partition on which i also had saved a system image. Though windows recommends External hard drive for backing up image when backing up the system.
I have a SanDisk Extreme SSD, 120MB, as my drive "C" dedicated to the OS and programs. I tried to use [COLOR=blue !important][COLOR=blue !important]Acronis [COLOR=blue !important]True[/COLOR][/COLOR][/COLOR] Image to make an image backup to two different drives on my system. In both cases it failed and trashed the hard drives.
View 4 Replies View RelatedThe other day I did a WindowsImageBackup,put it on the (I) drive. Right after the back up my desktop icons wont stay in place, never had that problem before. Can I just right click on the backup and delete the folder,or is there a way to do this that is safe.I dont want to run into any problems,just want to see if the icons get back to where I put them.
View 2 Replies View RelatedDid a fresh install of Windows 7 64-bit and all my apps, deleted Windows.old, defrag'ed and activated. Then created a SYSTEM IMAGE using Win 7 BACKUP and RESTORE, so far so good.
Win 7 and my apps take up 43.9 GB on the hard drive but the SYSTEM IMAGE it created on my external drive is only 23.7 GB. Tried it on my laptop with similar results ISO was about half the HDD. Does that sound right? Just seems the ISO should have matched the HDD GB-wise unless it compresses or something.
I perform an incremental back-up every day using the built-in backup program.
How often would you do a whole system image? I was thinking of only doing that every few months or less. Each image would be 80GB.
just attempting my first back up image on my new build. I only have one HD with Win 7 prof on a 200gb partition and 750ish remaining on the hd.Should I do it on the 200gb partition with win 7 on or the storage partition with 750 or create a new partition of ?
View 6 Replies View RelatedI have a large number of image files on my C: Drive. 337,000 files. Many are duplicates. I want to back these up to a new drive and edit them there. Is there a way of doing this with Windows 7 backup? Or some other free backup utility?
Windows 7 Home and Business 32bit
I have a system image that was saved to a maxtor one touch ext HD via USB. This was created using Windows 7 image making system. I am trying to copy the image to my new HDD (internal) 1TB. The problem is when I go to recovery>advanced options>restore from image and reboot, the PC cannot find the image. I can click advanced options and search for a driver and actually see the drive and the image folder/zips but Windows 7 cannot detect it. I have also copied this image to a internall HDD because I thought it may be the USB. I have not changed any BIOS settings as I am using Windows 7 on the 1TB HDD and trying to restore to that from either the Dnetouch or the F:internal HDD. Neither times will it find the image.uestions. Do I need to use an alternate program like paragon or clonezilla2. When the image is saved, it is the name of my pc. Example: Fesktop64-PC. Does it need to be in a folder or the image be a specific name? Ive seen WindowsImageBackup as a possiblity.
View 6 Replies View RelatedI am going to upgrade to Windows 8 Consumer Preview, so before doing so I backed up Windows 7 as a system image to my external hard drive. In doing so, I forgot that a system image includes all the files on the drive, which means it backed up about 700 GB worth of data. That's OK except I already had those files backed up individually, so now my external drive is basically out of space for future use. Instead, what I'd like to do, is do a system image of factory state without having to lose the files already on my drive. Is that possible? I could always go back to factory condition, and save the system image, but then I'd have to re-add all my programs and files after I get the Windows 8 upgrade completed. I'd rather not have to do that unless it's an emergency.
View 5 Replies View RelatedMy problem is if I restart with HDD on,it freezes when windows logo pops up during startup. I have a bunch of saved stuff on the external besides the backup img.Its a 500gb.It still froze when I only had 10gb saved on it. Will it delete everything I have saved on my external if I boot the img? I have a extra 20gb laying around,it is large enough to hold my saved backup.
View 2 Replies View Relatedi just ran the Windows 7 systems image bu first time. completed and created recovery disk. message said completed.when i look at my external hard drive, the created file contains 0 bytes; this doesn't seem right to me based on previous imaging software I have used.
View 4 Replies View RelatedI have a windows image backup which is taking up 60gb. I need to delete it but i dont know if its safe to just delete normally.
View 2 Replies View RelatedRight now I am backing up all my files and folders through SyncToy (for easy access) but I'd like to also back up my entire Windows image with the same kind of automatic method (only transfers changes from the previous backup). Is there a free or paid program that does this?
View 5 Replies View RelatedWhen I use Win 7 backup, it gives me the option each time I create a backup to create a system image. I created a system image on a CD a couple of days ago. Why does it ask me if I want to create another each time I do the backup? Is it talking about creating one on my hard drive, not a CD?
If it's just my hard drive then perhaps I should create one each time, but creating one on a CD is onerous. Plus, if this is the case, (that it wants me to create a CD) I don't know how that's to be done if the backup is on a schedule in the middle of the night.
I don't know if this has been asked already and sorry if it has.
Is there a way to save both Vista and Windows 7 complete system image on the same partition? If possible rename the folders at least (I tried this but didn't work)?
I have a limited space in my hard drive and allocated only one partition for system backups. I'm quite happy with Windows 7 and I would like to have both Vista and Windows 7 backups just in case. I'm also trying to avoid multiple DVDs as backup media as much as possible so that restoring the image would be easier for my kid when i'm not around.