Complete PC Backup Image Folder
Apr 12, 2009
I don't know if this has been asked already and sorry if it has.
Is there a way to save both Vista and Windows 7 complete system image on the same partition? If possible rename the folders at least (I tried this but didn't work)?
I have a limited space in my hard drive and allocated only one partition for system backups. I'm quite happy with Windows 7 and I would like to have both Vista and Windows 7 backups just in case. I'm also trying to avoid multiple DVDs as backup media as much as possible so that restoring the image would be easier for my kid when i'm not around.
View 1 Replies
ADVERTISEMENT
Nov 22, 2008
How to Create a System Image Backup in Windows 7 ?
View 0 Replies
View Related
Nov 14, 2009
I have a question about System Image Backups. (Win 7 Ultimate, 64-bit).
I have setup System Image Backups to my external 1TB eSATA drive.
I have chosen to allow Windows to manage the space used for backup history, Windows says it will use up to 279GB (which is fine).
The properties on the actual "Windows Image Backup" folder on the external drive shows the size as 32.6GB. However The Windows backup menu "Manage Windows Backup disk space" shows "System Image: 68.90 GB."
Primary Question:
Is Windows Backup storing my system images somewhere else in addition to this folder, or is the menu just plain wrong?
Additional Question: Is the Windows Backup utility capable of doing differential backups for the system image, or is each backup a full backup? The GUI menus are not giving me enough information. Based on what I see, it looks like System Image backups are always full, and data files are incremental or differential.
View 4 Replies
View Related
Aug 9, 2011
I created an image using the Microsoft Backup and Restore tool in Windows 7. I saved the image on a network shared folder.I then went to the Advanced Recovery Methods in Windows to restore my image...that I just created. It restarts the computer and goes into recovery mode, I point to where the image is located, I entered the network credentials and it give me an error. "The Specified network resource or device is no longer available. (0x80070037)"
View 5 Replies
View Related
Aug 24, 2009
I need a little help figuring this out. I made a backup image a while back on my network. Now that I want to re-image, I reboot as requested, wait for it to load, and Windows says it can't find my backup, "if it is on a network, close this window , type the network location."Putting in the network location does nothing, I'm just returned to the screen where it would list the backup image if it had found it, but there's nothing there.Thinking perhaps my NAS was the problem I copied the image onto a portable hard drive, but after rebooting into the restore program, Windows 7 doesn't find the USB drive.
View 9 Replies
View Related
Nov 22, 2009
if i do a back up image of my C drive can i then create a partition on the that HDD and then create a second OS using that image of C drive?
hope that makes sense
also can you update images or would you need to create new ones to keep them upto date?
View 3 Replies
View Related
Oct 20, 2012
I am looking for a software that can take a full image of laptop and easy to restore. Right now, my laptop started rebooting all at a sudden and quite commonly seeing blue screens. I have so many installations running on this laptop related to school , work the connections , vpn and all . I am looking for a easy software in the case of laptop crash, i am planning to buy a new laptop soon but installing all this softwares and all is hectic job and some of them i got installed at previous work place and fortunate enough to still use them.
I also have Win 7 pro installed currently which i will be resetting to windows 7 home after i got new laptop. Basically i am looking for a software which can help to take complete image of my laptop , and when i buy a new one this software should help me to restore everything and resemble 100% to old one so that i wont loss any thing and network permisisons and all.
View 3 Replies
View Related
Jun 16, 2009
From what I hear, pretty much everyone in the developed world who uses 7 will have Windows Backup included - not just files and folders, but system image backup as well.
Your average punter is not going to look any further than that.
That's got to be bad news for Acronis, Macrium, etc.
Sure, the enthusiasts will check out 3rd party options - like they do with browsers.
You would think the big name must have considered an anti - trust case.
Maybe they didn't go ahead as some versions of 7 won't include it ( you're not very likely to see those).
Or because they didn't want to upset the MS lovers - witness the vitriol heaped on Opera by people who should know better.
It was available in Vista - but only the higher priced versions - people chose to pay extra for that.
Here's another chance for a controversial discussion - go for it.
View 4 Replies
View Related
Dec 4, 2009
I have a new Dell XPS 13 (Windows 7 64-bit) and am pleased with it thus far. I have successfully created a system image on DVDs (Using Windows utility).
Twice I have tried the Windows Backup utility to back up all user files (what Windows selects) to DVDs and it does not complete! The utility gets to 66% or 67% running for approx 4-6 hours and does not prompt to insert another DVD (the 2nd). The total size of data to backup is approx 11GB. The second time I disabled the antivirus software (MSE) hoping that was causing the problem.
Any suggestions or solutions?
I'd like to backup to DVDs as I have plenty and do not have an external HD available.
View 2 Replies
View Related
Jan 26, 2013
on my dell inspiron desktop cannot complete backup. recently had to replace hard drive. set up a 30gb partition for backup but message is that it is insufficient space. backup appears to only require 12gb. what am i doing wrong? running windows 7 64 bit home premium with a 500 gb hard drive.
View 1 Replies
View Related
Jan 15, 2013
I have had many failed attempts at backingup my pc and keep getting the following error message"Backup encountered a problem while backing up file C:UsersSeanDesktop2013-01 (Jan). Error The system cannot find the file specified. (0x80070002))"
View 4 Replies
View Related
Dec 2, 2009
I was wondering if anyone could help me out with a problem, namely that Windows Backup doesn't seem to be working atm. When I try to backup, no matter what the files or destination drive, I get the error "the backup did not complete successfully" during the "creating volume shadow copy" phase. When "troubleshooting options" pops up, it says "The requested system device cannot be found" and gives error code 0x80073BC3.
It worked until recently, I have no idea what caused the problem I haven't updated my hardware or anything.
View 9 Replies
View Related
Mar 7, 2010
When attempting to backup a system image and/or selected libraries or files on an OEM installation of Windows 7 Home Premium 64-bit, I am receiving an error message. The initial pop-up states: The Last Backup Did Not Complete Successfully When I click on the pop-up to check the backup and select �More Details,� I see the following message. The System cannot find the file specified Error Code: 0x80070002 No additional information is provided. (And no clue is provided regarding what �file� is not found.) While I am attempting to backup to an external hard drive connected via eSATA, this error also occurs when I attempt a backup to either an external USB drive or a DVD.
I have attempted to run various backup scenarios wherein [a] Windows selects what to backup, [b] I choose a system image only, [c] I choose libraries only, or [d] I choose a very small data directory in a directory outside of the libraries. The error is always the same. When the system image is included, the backup does run for a time before the error message occurs � and a significant amount of data is written to the drive. When I run a file-only backup, the error is almost instantaneous. So far, in attempting to resolve the problem I have taken the following steps (although not necessarily in this order): Confirmed the registry profiles image paths are accordance with the information found at: The Storage Team at Microsoft - File Cabinet Blog : Common causes and solutions to Backup, System Restore, and Complete PC Backup problems - updated!. Everything was correct, no problems found. Ran the system file checker (sfc /scannow) with no errors reported. Scanned all hard drives (chkdsk x: /r) Confirmed that VSS and Windows Backup Services are running via services.msc Although I didn�t think it applied, I tested the Hotfix suggested at: You encounter problems when you move data over USB from a Windows 7 or Windows Server 2008 R2-based computer that has an NVIDIA USB EHCI chipset and at least 4GB of RAM. No success. Reviewed the information at Error code 0x80070002 when you back up files in Windows 7 however the scenarios did not apply and therefore the solutions were not available to me. Checked the error logs at C:WindowsLogsWindowsBackup, but the error log is empty . Ran a Clean Boot via msconfig.exe Attempted to run Backup in Safe Mode, but of course Backup & Restore cannot be run in safe mode, even if I try to start the services manually (Error 1084). Reset Backup Files Configuration, using instructions at: Backup User and System Files - Reset to Default Configuration I am extraordinarily frustrated. This is a new computer, and an almost new installation of Windows. I have obviously missed something, but don�t know what it is. I am desperate for a solution.
View 9 Replies
View Related
Feb 7, 2010
I keep getting an error when running a windows 7 backup. it backs up to a linux server on the network. network sharing is correct. At the very end of the backup it says some files were skipped. when i check on the linux server the hard drive is full of files so it has access so I don't think it is a network problem.
I had a look at the log files in "C:WindowsLogsWindowsBackup" at the file "Backup Files 2010-02-07 190008_error.txt". It says "Backup encountered a problem while backing up file C:WindowsSystem32configsystemprofileWebsites. Error: The system cannot find the file specified. (0x80070002)".
I have made a Library in my Library folder called websites containing website files.
View 5 Replies
View Related
Mar 27, 2011
I have window seven Hp pavilion 64 bit, 4 ghz sp1, computer and I have never had so many problems. I have done at least 4 system restores. The screen flashes, I have adjusted monitor display size. Computer will not complete a backup. I hear my dvd drive making noises. The computer is slow. Could not install adobe reader until last night. My last index number was 3.3 to 2.6 and now it says 3.3. I don't know what my default browser is, firefox, and windows tell me they are not.
How do I find out if I have malware, virus and or browser is jacked? My prairie form cleaner shows me my computer is collecting large files or daily activity. Also, I want to know if my computer is recording, how can I tell? I want to make sure the back door is closed. I have scanned with Norton, Windows Defender, Avast and AVG over the time and I have had at least 4 items to return. 3 items were removed 1 quarantined and I have done restores since then.
View 1 Replies
View Related
Dec 16, 2011
i am gitting when i try to run backup windows backup fail while determing libraries locations of one of the users included in backup . Details : A volume shadow copy service component encountered an unexpected error the error codes here are 2 of em 0x81000031 and 0x8004230f
View 4 Replies
View Related
Oct 17, 2012
How can you recover a complete folder that has just disappeared from your pc?
View 2 Replies
View Related
Nov 1, 2010
I have a Win7 ultimate 64bit I recieved from a friend. I assumed it was one of his Microsoft apps he gets in his MSDN subscription for free. Anyway, every now and then I would get these pop-ups from Microsoft saying its not genuine. He would give me a script to run that would fix it, until it would happen again.Bottom line I foud out later this was pirated software so I purchased a normal copy (win7 pro 64 bit) to do a reinstal of the software, BUTTTTT now I can't do it because I keep getting these errors saying "Windows was unable to create the required instalation folder 0x80070005". I know the last update for the pirated copy was something to remove "RemoveWAT.exe". I tried to do a restore in Win7 to a previous state but it errored "0x80070001"Any advice on what to do. I don't want to have to reformat the whole drive, because this was a dual boot on a new MAC so I could boot in iether MAC or Win7.
View 2 Replies
View Related
Jun 18, 2012
I have a SanDisk Extreme SSD, 120MB, as my drive "C" dedicated to the OS and programs. I tried to use [COLOR=blue !important][COLOR=blue !important]Acronis [COLOR=blue !important]True[/COLOR][/COLOR][/COLOR] Image to make an image backup to two different drives on my system. In both cases it failed and trashed the hard drives.
View 4 Replies
View Related
Aug 18, 2012
The other day I did a WindowsImageBackup,put it on the (I) drive. Right after the back up my desktop icons wont stay in place, never had that problem before. Can I just right click on the backup and delete the folder,or is there a way to do this that is safe.I dont want to run into any problems,just want to see if the icons get back to where I put them.
View 2 Replies
View Related
Oct 30, 2009
Did a fresh install of Windows 7 64-bit and all my apps, deleted Windows.old, defrag'ed and activated. Then created a SYSTEM IMAGE using Win 7 BACKUP and RESTORE, so far so good.
Win 7 and my apps take up 43.9 GB on the hard drive but the SYSTEM IMAGE it created on my external drive is only 23.7 GB. Tried it on my laptop with similar results ISO was about half the HDD. Does that sound right? Just seems the ISO should have matched the HDD GB-wise unless it compresses or something.
View 9 Replies
View Related
Nov 7, 2009
I perform an incremental back-up every day using the built-in backup program.
How often would you do a whole system image? I was thinking of only doing that every few months or less. Each image would be 80GB.
View 5 Replies
View Related
Nov 11, 2009
I think that's what it's called. anyway something more then just a backup. One that you don't have to reinstall your software to get it into the registry.
Do I need special software? or is there a utility in Windows 7. If not what do I need to buy?
I just.. just finished Windows 7 installation. Now my D drive is failing. Both drives are the same make model and old, in fact they were in an older computer and almost everything in the pc was updated except the harddrives because they are more then sufficient in size.
So maybe I should replace them both. But I don't want to go through the pain of reinstalling. Anyway, I usually have to reinstall due to my husbands email "joke sharing" practice usually gives us a virus about twice a year.
This backup would be very helpful, I just never looked into it until now.
View 6 Replies
View Related
Oct 11, 2011
just attempting my first back up image on my new build. I only have one HD with Win 7 prof on a 200gb partition and 750ish remaining on the hd.Should I do it on the 200gb partition with win 7 on or the storage partition with 750 or create a new partition of ?
View 6 Replies
View Related
Sep 18, 2011
I have a large number of image files on my C: Drive. 337,000 files. Many are duplicates. I want to back these up to a new drive and edit them there. Is there a way of doing this with Windows 7 backup? Or some other free backup utility?
Windows 7 Home and Business 32bit
View 4 Replies
View Related
Oct 15, 2011
I have a system image that was saved to a maxtor one touch ext HD via USB. This was created using Windows 7 image making system. I am trying to copy the image to my new HDD (internal) 1TB. The problem is when I go to recovery>advanced options>restore from image and reboot, the PC cannot find the image. I can click advanced options and search for a driver and actually see the drive and the image folder/zips but Windows 7 cannot detect it. I have also copied this image to a internall HDD because I thought it may be the USB. I have not changed any BIOS settings as I am using Windows 7 on the 1TB HDD and trying to restore to that from either the Dnetouch or the F:internal HDD. Neither times will it find the image.uestions. Do I need to use an alternate program like paragon or clonezilla2. When the image is saved, it is the name of my pc. Example: Fesktop64-PC. Does it need to be in a folder or the image be a specific name? Ive seen WindowsImageBackup as a possiblity.
View 6 Replies
View Related
Apr 8, 2012
I am going to upgrade to Windows 8 Consumer Preview, so before doing so I backed up Windows 7 as a system image to my external hard drive. In doing so, I forgot that a system image includes all the files on the drive, which means it backed up about 700 GB worth of data. That's OK except I already had those files backed up individually, so now my external drive is basically out of space for future use. Instead, what I'd like to do, is do a system image of factory state without having to lose the files already on my drive. Is that possible? I could always go back to factory condition, and save the system image, but then I'd have to re-add all my programs and files after I get the Windows 8 upgrade completed. I'd rather not have to do that unless it's an emergency.
View 5 Replies
View Related
Sep 20, 2012
My problem is if I restart with HDD on,it freezes when windows logo pops up during startup. I have a bunch of saved stuff on the external besides the backup img.Its a 500gb.It still froze when I only had 10gb saved on it. Will it delete everything I have saved on my external if I boot the img? I have a extra 20gb laying around,it is large enough to hold my saved backup.
View 2 Replies
View Related
Oct 7, 2012
i just ran the Windows 7 systems image bu first time. completed and created recovery disk. message said completed.when i look at my external hard drive, the created file contains 0 bytes; this doesn't seem right to me based on previous imaging software I have used.
View 4 Replies
View Related
Oct 10, 2012
I have a couple of these older drives in good condition is it possible to install one and backup my OS/image file from my sata drive, and be able to restore in case of system crash? Or should I get another Sata drive or usb flash drive instead?
View 3 Replies
View Related
Nov 3, 2012
I have a windows image backup which is taking up 60gb. I need to delete it but i dont know if its safe to just delete normally.
View 2 Replies
View Related
